6EP41363AB002AY0

Data sheet 6EP4136-3AB00-2AY0 SITOP UPS1600/DC/24VDC/20A/IE/PN SITOP UPS1600 20 A Ethernet/ PROFINET uninterruptible power supply with Ethernet / PROFINET interface / OPC UA server / web server input: 24 V DC output: 24 V DC/20 A *Ex approval no longer available* Input supply voltage at DC rated value 24 V voltage curve at input DC input voltage range 21 ... 29 V DC adjustable response value voltage for buffer connection preset 21.5 V adjustable response value voltage for buffer connection 21 ... 25 V; Adjustable: 21 V, 21.5 V, 22 V, 22.5 V, 23 V, 24 V, 25 V DC or via software input current at rated input voltage 24 V rated value 25 A; for max. charging current (4 A) Mains buffering type of energy storage with batteries design of the mains power cut bridging-connection Adjustable range using rotary coding switch: 0.5 min, 1 min, 2 min, 5 min, 10 min, 20 min, max. buffering time or via software charging current 0.1 A, 4 A adjustable charging current maximum note Automatically depending on battery module Output output voltage ● in normal operation at DC rated value 24 V ● in buffering mode at DC rated value 24 V formula for output voltage Vin - approx. 0.2 V startup delay time typical 60 ms voltage increase time of the output voltage typical 60 ms output voltage in buffering mode at DC 18.5 ... 27 V output current ● rated value 20 A ● in normal operation 0 ... 60 A ● in buffering mode 0 ... 60 A peak current 60 A property of the output short-circuit proof Yes design of short-circuit protection Limitation to 3 x I rated for 30 ms/min; through-conductivity for 1.5 x I rated for 5 sec/min supplied active power typical 480 W Efficiency efficiency in percent ● at rated output voltage for rated value of the output current typical 97.5 % ● in case of operation on rechargeable battery typical 97.5 % power loss [W] ● at rated output voltage for rated value of the output current typical 11 W ● in case of operation on rechargeable battery typical 11 W 6EP41363AB002AY0 Page 1/3 7/4/2022 Subject to change without notice © Copyright Siemens Protection and monitoring product function ● reverse polarity protection against energy storage unit polarity reversal Yes ● reverse polarity protection against input voltage polarity reversal Yes Signaling display version ● for normal operation Normal operation: LED green (OK), floating changeover contact "Bat/OK" to setting "OK" ("OK" means: Voltage of the supplying power supply unit is greater than cut-in threshold set at the DC UPS module); Lack of buffer standby: LED red (alarm), floating changeover contact "Alarm/Bat" to setting "Alarm"; Battery replacement required: LED red (alarm) flashing with approx. 0.25 Hz, floating changeover contact "Alarm/Bat" switching with approx. 0.25 Hz; Energy storage > 85%: LED green (Bat > 85%), floating NO contact "Bat > 85" closed; Permissible contact current capacity: DC 60 V/1 A or AC 30 V /1 A ● in buffering mode Buffered mode: LED yellow (Bat), floating changeover contact "OK/Bat" to setting "Bat"; Prewarning battery voltage < 20.4 VDC: LED red (alarm), floating changeover contact "Alarm/Bat" to setting "Alarm"; Energy storage > 85%: LED green (Bat > 85%), floating NO contact "Bat > 85" closed Interface product component PC interface Yes design of the interface Ethernet/PROFINET Safety galvanic isolation between input and output No operating resource protection class Class III protection class IP IP20 Approvals certificate of suitability ● CE marking Yes ● UL approval Yes ● as approval for USA cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259 ● CSA approval Yes ● cCSAus, Class 1, Division 2 No ● ATEX No type of certification CB-certificate Yes certificate of suitability ● EAC approval Yes ● C-Tick Yes ● shipbuilding approval Yes shipbuilding approval ABS, DNV GL Marine classification association ● American Bureau of Shipping Europe Ltd. (ABS) Yes ● DNV GL Yes EMC standard ● for emitted interference EN 55022 Class B ● for interference immunity EN 61000-6-2 environmental conditions ambient temperature ● during operation -25 ... +70 °C; with natural convection ● during transport -40 ... +85 °C ● during storage -40 ... +85 °C environmental category according to IEC 60721 Climate class 3K3, 5 … 95% no condensation Mechanics type of electrical connection screw-type terminals ● at input 24 V DC: 2 screw terminals for 0.2 ... 6 mm²/24 ... 13 AWG ● at output 24 V DC: 2 screw terminals for 0.2 ... 6 mm²/24 ... 13 AWG ● for rechargeable battery module 24 V DC: 2 screw terminals for 0.2 ... 6 mm²/24 ... 13 AWG ● for control circuit and status message 14 screw terminals for 0.2 ... 1.5 mm²/24 ... 16 AWG 6EP41363AB002AY0 Page 2/3 7/4/2022 Subject to change without notice © Copyright Siemens width of the enclosure 50 mm height of the enclosure 139 mm depth of the enclosure 125 mm required spacing ● top 50 mm ● bottom 50 mm ● left 0 mm ● right 0 mm net weight 0.45 kg product feature of the enclosure housing can be lined up Yes fastening method Snaps onto DIN rail EN 60715 35x7.5/15 electrical accessories Battery module MTBF at 40 °C 345 056 h reference code according to IEC 81346-2 T other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) 6EP41363AB002AY0 Page 3/3 7/4/2022 Subject to change without notice © Copyright Siemens