Data sheet
6ES7134-6FF00-0AA1
SIMATIC ET 200SP, Analog input module, AI 8XU Basic, suitable for BU
type A0, A1, Color code CC02, Module diagnostics, 16 bit
General information
Product type designation
AI 8xU BA
HW functional status
from FS04
Firmware version
● FW update possible
Yes
usable BaseUnits
BU type A0, A1
Color code for module-specific color identification plate
CC02
Product function
● I&M data
Yes; I&M0 to I&M3
● Isochronous mode
No
● Measuring range scalable
No
Engineering with
● STEP 7 TIA Portal configurable/integrated from
version
V13 SP1
● STEP 7 configurable/integrated from version
V5.5 SP3 / -
● PROFIBUS from GSD version/GSD revision
One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision
GSDML V2.3
Operating mode
● Oversampling
No
● MSI
No
CiR - Configuration in RUN
Reparameterization possible in RUN
Yes
Calibration possible in RUN
No
Supply voltage
Rated value (DC)
24 V
permissible range, lower limit (DC)
19.2 V
permissible range, upper limit (DC)
28.8 V
Reverse polarity protection
Yes
Input current
Current consumption, max.
25 mA
Power loss
Power loss, typ.
0.7 W
Address area
Address space per module
● Address space per module, max.
16 byte
Hardware configuration
Automatic encoding
Yes
● Mechanical coding element
Yes
● Type of mechanical coding element
type B
6ES71346FF000AA1
Page 1/3
7/8/2022
Subject to change without notice
© Copyright Siemens
Selection of BaseUnit for connection variants
● 1-wire connection
BU type A0, A1
● 2-wire connection
BU type A0, A1
Analog inputs
Number of analog inputs
● For voltage measurement
8; Single-ended
8
permissible input voltage for voltage input (destruction
limit), max.
30 V
Cycle time (all channels), min.
1 ms; per channel
Input ranges (rated values), voltages
● 0 to +10 V
— Input resistance (0 to 10 V)
● -10 V to +10 V
— Input resistance (-10 V to +10 V)
Yes; 15 bit
100 kΩ
Yes; 16 bit incl. sign
100 kΩ
Cable length
● shielded, max.
200 m
Analog value generation for the inputs
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.
16 bit
● Integration time, parameterizable
Yes
● Interference voltage suppression for interference
frequency f1 in Hz
16.67 / 50 / 60 / 4 800 (16.67 / 50 / 60)
● Conversion time (per channel)
180 / 60 / 50 / 0.625 (67.5 / 22.5 / 18.75) ms
Smoothing of measured values
● Number of smoothing levels
4; None; 4/8/16 times
● parameterizable
Yes
Encoder
Connection of signal encoders
● for voltage measurement
Yes
● for current measurement as 4-wire transducer
No
Errors/accuracies
Linearity error (relative to input range), (+/-)
0.01 %
Temperature error (relative to input range), (+/-)
0.005 %/K
Crosstalk between the inputs, min.
-50 dB
Repeat accuracy in steady state at 25 °C (relative to input
range), (+/-)
0.05 %
Operational error limit in overall temperature range
● Voltage, relative to input range, (+/-)
0.5 %
Basic error limit (operational limit at 25 °C)
● Voltage, relative to input range, (+/-)
0.3 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Series mode interference (peak value of
interference < rated value of input range), min.
70 dB; With conversion time 67.5 / 22.5 / 18.75 ms: 40 dB
Interrupts/diagnostics/status information
Diagnostics function
Yes
Alarms
● Diagnostic alarm
Yes
● Limit value alarm
No
Diagnoses
● Monitoring the supply voltage
Yes
● Wire-break
No
● Short-circuit
No
● Group error
Yes
● Overflow/underflow
Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED)
Yes; green PWR LED
● Channel status display
Yes; green LED
● for channel diagnostics
No
● for module diagnostics
Yes; green/red DIAG LED
Potential separation
6ES71346FF000AA1
Page 2/3
7/8/2022
Subject to change without notice
© Copyright Siemens
Potential separation channels
● between the channels
No
● between the channels and backplane bus
Yes
● between the channels and the power supply of the
electronics
No
Isolation
Isolation tested with
707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.
-30 °C; < 0 °C as of FS04
● horizontal installation, max.
60 °C
● vertical installation, min.
-30 °C; < 0 °C as of FS04
● vertical installation, max.
50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.
5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width
15 mm
Height
73 mm
Depth
58 mm
Weights
Weight, approx.
31 g
last modified:
1/24/2021
6ES71346FF000AA1
Page 3/3
7/8/2022
Subject to change without notice
© Copyright Siemens
很抱歉,暂时无法提供与“6ES71346FF000AA1”相匹配的价格&库存,您可以联系我们找货
免费人工找货