6ES7135-6FB00-0BA1

Data sheet 6ES7135-6FB00-0BA1 SIMATIC ET 200SP, Analog output module, AQ 2xU Standard, Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit General information Product type designation AQ 2xU ST HW functional status From FS03 Firmware version ● FW update possible Yes usable BaseUnits BU type A0, A1 Color code for module-specific color identification plate CC00 Product function ● I&M data Yes; I&M0 to I&M3 ● Isochronous mode No ● Output range scalable No Engineering with ● STEP 7 TIA Portal configurable/integrated from version V13 SP1 / - ● STEP 7 configurable/integrated from version V5.5 SP3 / - ● PROFIBUS from GSD version/GSD revision GSD Revision 5 ● PROFINET from GSD version/GSD revision GSDML V2.3 Operating mode ● Oversampling No ● MSO No CiR - Configuration in RUN Reparameterization possible in RUN Yes Calibration possible in RUN No Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Input current Current consumption, max. 80 mA Power loss Power loss, typ. 1W Address area Address space per module ● Address space per module, max. 4 byte; + 1 byte for QI information Hardware configuration Automatic encoding ● Mechanical coding element Yes ● Type of mechanical coding element Type A Analog outputs Number of analog outputs 6ES71356FB000BA1 Page 1/3 2 4/26/2024 Subject to change without notice © Copyright Siemens Voltage output, short-circuit current, max. 45 mA Cycle time (all channels), min. 1 ms Analog output with oversampling No Output ranges, voltage ● 0 to 10 V Yes; 15 bit ● 1 V to 5 V Yes; 13 bit ● -5 V to +5 V Yes; 15 bit incl. sign ● -10 V to +10 V Yes; 16 bit incl. sign Connection of actuators ● for voltage output two-wire connection Yes ● for voltage output four-wire connection No Load impedance (in rated range of output) ● with voltage outputs, min. 2 kΩ ● with voltage outputs, capacitive load, max. 1 µF Destruction limits against externally applied voltages and currents ● Voltages at the outputs 30 V Cable length ● shielded, max. 200 m Analog value generation for the outputs Integration and conversion time/resolution per channel ● Resolution with overrange (bit including sign), max. 16 bit Settling time ● for resistive load 0.1 ms ● for capacitive load 1 ms Errors/accuracies Linearity error (relative to output range), (+/-) 0.03 % Temperature error (relative to output range), (+/-) 0.005 %/K Crosstalk between the outputs, min. -50 dB Repeat accuracy in steady state at 25 °C (relative to output range), (+/-) 0.05 % Operational error limit in overall temperature range ● Voltage, relative to output range, (+/-) 0.5 % ● Current, relative to output range, (+/-) 0.5 % Basic error limit (operational limit at 25 °C) ● Voltage, relative to output range, (+/-) 0.3 % ● Current, relative to output range, (+/-) 0.3 % Interrupts/diagnostics/status information Diagnostics function Yes Substitute values connectable Yes Alarms ● Diagnostic alarm Yes Diagnoses ● Monitoring the supply voltage Yes ● Short-circuit Yes ● Group error Yes ● Overflow/underflow Yes Diagnostics indication LED ● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED ● Channel status display Yes; green LED ● for channel diagnostics No ● for module diagnostics Yes; green/red DIAG LED Potential separation Potential separation channels ● between the channels No ● between the channels and backplane bus Yes ● between the channels and the power supply of the electronics Yes Isolation Isolation tested with 707 V DC (type test) Ambient conditions Ambient temperature during operation 6ES71356FB000BA1 Page 2/3 4/26/2024 Subject to change without notice © Copyright Siemens ● horizontal installation, min. -30 °C; < 0 °C as of FS03 ● horizontal installation, max. 60 °C ● vertical installation, min. -30 °C; < 0 °C as of FS03 ● vertical installation, max. 50 °C Altitude during operation relating to sea level ● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual Dimensions Width 15 mm Height 73 mm Depth 58 mm Weights Weight, approx. 31 g last modified: 3/12/2024 6ES71356FB000BA1 Page 3/3 4/26/2024 Subject to change without notice © Copyright Siemens