6ES71424BD000AA0

Data sheet 6ES7142-4BD00-0AA0 SIMATIC DP, electronic module for ET 200 PRO, 4 DO 24 V DC, 2.0A; Module diagnostics; incl. bus module, Connection module IO 6ES71944..00-0AA0 order separately Supply voltage Load voltage 2L+ ● Rated value (DC) 24 V ● Short-circuit protection Yes; per channel, electronic ● Reverse polarity protection Yes; against destruction; load increasing Input current from load voltage 2L+ (without load), max. 20 mA from backplane bus 3.3 V DC, max. 20 mA Power loss Power loss, typ. 2W Address area Address space per module ● Address space per module, max. 1 byte Digital outputs Number of digital outputs 4 Short-circuit protection Yes ● Response threshold, typ. Controlling a digital input 2.8 A Yes Switching capacity of the outputs ● on lamp load, max. 10 W Load resistance range ● lower limit 12 Ω ● upper limit 4 kΩ Output current ● for signal "1" rated value 2A ● for signal "0" residual current, max. 0.5 mA Parallel switching of two outputs ● for uprating No ● for redundant control of a load Yes Switching frequency ● with resistive load, max. 100 Hz ● with inductive load, max. 0.5 Hz ● on lamp load, max. 1 Hz Total current of the outputs (per group) all mounting positions — up to 55 °C, max. 4A Cable length 6ES71424BD000AA0 Page 1/2 1.20.2021 Subject to change without notice © Copyright Siemens ● shielded, max. 30 m ● unshielded, max. 30 m Interrupts/diagnostics/status information Diagnostics function Yes Alarms ● Diagnostic alarm Yes Diagnoses ● Diagnostic information readable Yes ● Short-circuit Yes; Short-circuit of outputs to ground; module by module Diagnostics indication LED ● Group error SF (red) Yes ● Status indicator digital output (green) Yes Potential separation between backplane bus and all other circuit components Yes Potential separation digital outputs ● between the channels No ● between the channels and backplane bus Yes Isolation Isolation tested with 707 V DC (type test) Standards, approvals, certificates Suitable for safety-related tripping of standard modules Yes Highest safety class achievable for safety-related tripping of standard modules ● Performance level according to ISO 13849-1 PL d ● Category according to ISO 13849-1 Cat. 3 ● SILCL according to IEC 62061 SILCL 2 Dimensions Width 45 mm Height 130 mm Depth 35 mm Weights Weight, approx. 140 g last modified: 1/16/2021 6ES71424BD000AA0 Page 2/2 1.20.2021 Subject to change without notice © Copyright Siemens