6ES71486JD000AB0

Data sheet 6ES7148-6JD00-0AB0 SIMATIC DP, ET 200eco PN, IO-Link master, 4IO-L, 4xM12, Degree of protection IP67 Supply voltage Rated value (DC) 24 V Reverse polarity protection Yes Load voltage 2L+ ● Rated value (DC) 24 V ● Reverse polarity protection Yes; against destruction; load increasing Input current Current consumption, typ. 100 mA from supply voltage 1L+, max. 4A from load voltage 2L+, max. 4A Encoder supply Number of outputs 4 24 V encoder supply ● Short-circuit protection Yes; per channel, electronic ● Output current, max. 500 mA; Per channel Power loss Power loss, typ. 4.8 W IO-Link Number of ports ● of which simultaneously controllable 4 4 IO-Link protocol 1.0 Yes IO-Link protocol 1.1 Yes Transmission rate 4.8 kBaud (COM1); 38.4 kBaud (COM2), 230 kBaud (COM3) Size of process data, input per port 32 byte Size of process data, input per module 128 bytes + 4 bytes PQI Size of process data, output per port 32 byte Size of process data, output per module 128 byte Memory size for device parameter 2 kbyte; for each port Cable length unshielded, max. 20 m Operating modes ● IO-Link Yes ● DI Yes ● DQ Yes Connection of IO-Link devices ● Port type A Yes; via 3-core cable ● Port type B Yes; Additional device supply: max. 2 A per port, max. 4 A per module Interfaces 6ES71486JD000AB0 Page 1/2 1.19.2021 Subject to change without notice © Copyright Siemens Transmission procedure 100BASE-TX Number of PROFINET interfaces 1 1. Interface Interface types ● M12 port Yes ● integrated switch Yes Interface types M12 port ● Autonegotiation Yes ● Autocrossing Yes ● Transmission rate, max. 100 Mbit/s Protocols Supports protocol for PROFINET IO Yes PROFINET CBA No PROFIsafe No PROFINET IO Device Services — IRT with the option "high flexibility" Yes Redundancy mode Media redundancy — MRP Yes Open IE communication ● TCP/IP No ● SNMP Yes ● DCP Yes ● LLDP Yes ● ping Yes ● ARP Yes Interrupts/diagnostics/status information Diagnostics function Yes Alarms ● Diagnostic alarm Yes Diagnoses ● Diagnostic information readable Yes ● Monitoring the supply voltage Yes; green "ON" LED ● Short-circuit Yes; Device supply to M ● Group error Yes; Red/yellow "SF/MT" LED Potential separation between the load voltages Yes between load voltage and all other switching components No between Ethernet and electronics Yes Isolation tested with ● 24 V DC circuits 707 V DC (type test) ● Test voltage for interface, rms value [Vrms] 1 500 V; According to IEEE 802.3 Standards, approvals, certificates Suitable for safety-related tripping of standard modules No Connection method Design of electrical connection 3/5-pin M12 round connectors Dimensions Width 30 mm Height 200 mm Depth 49 mm Weights Weight, approx. 550 g last modified: 1/16/2021 6ES71486JD000AB0 Page 2/3 1.19.2021 Subject to change without notice © Copyright Siemens 6ES71486JD000AB0 Page 3/3 1.19.2021 Subject to change without notice © Copyright Siemens