6ES7153-1AA03-0XB0.

Data sheet 6ES7153-1AA03-0XB0 SIMATIC DP, Connection IM 153-1, for ET 200M, for max. 8 S7-300 modules General information Product type designation IM 153-1 DP ST Vendor identification (VendorID) 801Dh Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 20.4 V permissible range, upper limit (DC) 28.8 V external protection for power supply lines (recommendation) not necessary Mains buffering ● Mains/voltage failure stored energy time 5 ms Input current Current consumption, max. 350 mA; At 24 V DC Inrush current, typ. 2.5 A I²t 0.1 A²·s output voltage / header Rated value (DC) 5V Output current for backplane bus (5 V DC), max. 1A Power loss Power loss, typ. 3W Address area Addressing volume ● Inputs 128 byte ● Outputs 128 byte Hardware configuration Number of modules per DP slave interface, max. 8 Interfaces Transmission procedure RS 485 Transmission rate, max. 12 Mbit/s 1. Interface automatic detection of transmission rate Yes Interface types ● Output current of the interface, max. 90 mA ● Design of the connection 9-pin sub D socket PROFIBUS DP slave ● GSD file (for DPV1) SIEM801D.GSD; SI01801D.GSG ● automatic baud rate search Yes Protocols Bus protocol/transmission protocol 6ES71531AA030XB0 Page 1/2 PROFIBUS DP to EN 50170 4/26/2024 Subject to change without notice © Copyright Siemens Protocols (Ethernet) ● TCP/IP No PROFIBUS DP ● Number of node addresses, max. 1 to 125 permitted Services — SYNC capability Yes — FREEZE capability Yes — Direct data exchange (slave-to-slave communication) Yes; Sender Potential separation Potential separation exists Yes Isolation Isolation tested with Isolation voltage 500 V Degree and class of protection IP degree of protection IP20 Ambient conditions Ambient temperature during operation ● min. 0 °C ● max. 60 °C ● horizontal installation, min. 0 °C ● horizontal installation, max. 60 °C ● vertical installation, min. 0 °C ● vertical installation, max. 40 °C Altitude during operation relating to sea level ● Installation altitude above sea level, max. 3 000 m configuration / header Configuration software ● STEP 7 STEP 7 / COM PROFIBUS / non-Siemens tools via GSD file Dimensions Width 40 mm Height 125 mm Depth 117 mm Weights Weight, approx. 360 g last modified: 3/12/2024 6ES71531AA030XB0 Page 2/2 4/26/2024 Subject to change without notice © Copyright Siemens