6ES7155-6AU01-0CN0

Data sheet 6ES7155-6AU01-0CN0 SIMATIC ET 200SP, PROFINET, 2-port interface module IM 155-6PN/2 High Feature, 1 slot for BusAdapter, max. 64 I/O modules and 16 ET 200AL modules, S2 redundancy, multi-hotswap, 0.25 ms, isochronous mode, optional PN strain relief, including server module General information Product type designation IM 155-6 PN/2 HF HW functional status From FS02 Firmware version V4.2 ● FW update possible Yes Product function ● I&M data Yes; I&M0 to I&M3 ● Module swapping during operation (hot swapping) Yes; Multi-hot swapping ● Isochronous mode Yes ● Tool changer Yes; Docking station and docking unit Engineering with ● STEP 7 TIA Portal configurable/integrated from version V15.1 ● STEP 7 configurable/integrated from version use GSD file ● PROFINET from GSD version/GSD revision GSDML V2.34 Configuration control via dataset Yes Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Short-circuit protection Yes Mains buffering ● Mains/voltage failure stored energy time 10 ms Input current Current consumption, max. 700 mA Inrush current, max. 4.5 A I²t 0.25 A²·s Power loss Power loss, typ. 2.4 W Address area Address space per module ● Address space per module, max. 288 byte; For input and output data respectively Address space per station ● Address space per station, max. 1 440 byte Hardware configuration Rack ● Quantity of operable ET 200SP modules, max. 64 ● Quantity of operable ET 200AL modules, max. 16 Submodules 6ES71556AU010CN0 Page 1/3 5/22/2024 Subject to change without notice © Copyright Siemens ● Number of submodules per station, max. 256 Interfaces Number of PROFINET interfaces 1; 2 ports (switch) 1. Interface Interface types ● RJ 45 (Ethernet) Yes; with BusAdapter ● Number of ports 2; with BusAdapter ● integrated switch Yes ● BusAdapter (PROFINET) Yes; BA 2x RJ45, BA 2x FC, BA 2x SCRJ, BA SCRJ/RJ45, BA SCRJ/FC, BA 2x LC, BA LC/RJ45, BA LC/FC Protocols ● PROFINET IO Device Yes ● Open IE communication Yes ● Media redundancy Yes; PROFINET MRP client PROFINET IO Device Services — IRT Yes; 250 µs to 4 ms in 125 µs frame — PROFIenergy Yes — Prioritized startup Yes — Shared device Yes — Number of IO Controllers with shared device, max. 4 Interface types RJ 45 (Ethernet) ● Transmission procedure PROFINET with 100 Mbit/s full duplex (100BASE-TX) ● 100 Mbps Yes ● Autonegotiation Yes ● Autocrossing Yes Protocols Modbus TCP No Number of connections ● Number of MtM communication relationships/connections, max. 16 Redundancy mode ● PROFINET system redundancy (S2) Yes; NAP S2 ● H-Sync forwarding Yes Media redundancy — MRP Yes — MRPD No Open IE communication ● TCP/IP Yes ● SNMP Yes ● LLDP Yes Isochronous mode Bus cycle time (TDP), min. 250 µs Jitter, max. 1 µs Interrupts/diagnostics/status information Status indicator Yes Alarms Yes Diagnostics function Yes Diagnostics indication LED ● RUN LED Yes; green LED ● ERROR LED Yes; red LED ● MAINT LED Yes; Yellow LED ● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED ● Connection display LINK TX/RX Yes; 2x green link LEDs on BusAdapter Potential separation between backplane bus and electronics No between PROFINET and all other circuits Yes; 1500 V AC (type test) between supply and all other circuits No Permissible potential difference between different circuits 6ES71556AU010CN0 Page 2/3 Safety extra low voltage SELV 5/22/2024 Subject to change without notice © Copyright Siemens Isolation Isolation tested with 707 V DC (type test) Standards, approvals, certificates Network loading class 3 Ambient conditions Ambient temperature during operation ● horizontal installation, min. -30 °C; No condensation ● horizontal installation, max. 60 °C ● vertical installation, min. -30 °C; No condensation ● vertical installation, max. 50 °C Altitude during operation relating to sea level ● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual connection method ET-Connection ● via BU/BA Send Yes; + 16 ET 200AL modules Mechanics/material Strain relief Yes; Optional Dimensions Width 50 mm Height 117 mm Depth 74 mm Weights Weight, approx. 120 g; without BusAdapter last modified: 5/22/2024 6ES71556AU010CN0 Page 3/3 5/22/2024 Subject to change without notice © Copyright Siemens