6ES71936BP000DA1

Data sheet 6ES7193-6BP00-0DA1 SIMATIC ET 200SP, BaseUnit BU15-P16+A0+2D/T, BU type A1, Push-in terminals, without AUX terminals, New load group, WxH: 15x 117 mm, with temperature acquisition General information Product type designation BU type A1 HW functional status FS10 and higher Supply voltage Rated value (DC) 24 V external protection for power supply lines Yes; 24 V DC/10 A miniature circuit breaker with type B or C tripping characteristic Current carrying capacity For P1 and P2 bus, max. 10 A For process terminals, max. 2A Hardware configuration Temperature sensor Yes Formation of potential groups ● New potential group Yes ● Potential group continued from the left No Slots ● Number of slots 1; Type A1 Potential separation between the potential groups Yes Isolation Isolation tested with 707 V DC (type test) Ambient conditions Ambient temperature during operation ● horizontal installation, min. -30 °C ● horizontal installation, max. 60 °C ● vertical installation, min. -30 °C ● vertical installation, max. 50 °C Altitude during operation relating to sea level ● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual Accessories Color coding labels ● for process terminals CC00 to CC09 ● for AUX terminals does not exist ● for add-on terminals does not exist Connection method Terminals ● Terminal type 6ES71936BP000DA1 Page 1/2 Push-in terminal 1.19.2021 Subject to change without notice © Copyright Siemens ● Conductor cross-section, min. 0.14 mm² ● Conductor cross-section, max. 2.5 mm² ● Number of process terminals to I/O module 16 ● Number of terminals to AUX bus 0 ● Number of add-on terminals 0 ● Number of terminals with connection to P1 and P2 bus 2 Dimensions Width 15 mm Height 117 mm Depth 35 mm Weights Weight, approx. 40 g last modified: 1/16/2021 6ES71936BP000DA1 Page 2/2 1.19.2021 Subject to change without notice © Copyright Siemens