6ES7223-1QH32-0XB0

Data sheet 6ES7223-1QH32-0XB0 SIMATIC S7-1200, DIGITAL I/O SM 1223, 8DI AC / 8DO RLY, 8DI 120/230 V AC, 8DO, RELAY 2A Supply voltage Rated value (DC) ● 24 V DC Yes permissible range, lower limit (DC) 20.4 V permissible range, upper limit (DC) 28.8 V Input current from backplane bus 5 V DC, max. 120 mA Output voltage Power supply to the transmitters ● present Yes Power loss Power loss, typ. 7.5 W Digital inputs Number of digital inputs ● in groups of Input characteristic curve in accordance with IEC 61131, type 1 6ES7223-1QH32-0XB0 Page 1/4 8 4 Yes 25.01.2016 Changes preserved © Copyright Siemens AG Number of simultaneously controllable inputs all mounting positions — up to 40 °C, max. 8 horizontal installation — up to 40 °C, max. 8 — up to 50 °C, max. 8 vertical installation — up to 40 °C, max. 8 Input voltage ● Type of input voltage AC ● Rated value (AC) 120/230V AC ● for signal "0" 20 V AC at 1 mA ● for signal "1" 79 V AC at 2.5 mA Input current ● for signal "0", max. (permissible quiescent current) 1 mA ● for signal "1", min. 2.5 mA ● for signal "1", typ. 9 mA Input delay (for rated value of input voltage) for standard inputs — parameterizable Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four for interrupt inputs — parameterizable Yes Cable length ● shielded, max. 500 m ● unshielded, max. 300 m Digital outputs Number of digital outputs ● in groups of Short-circuit protection 8 4 No; to be provided externally Switching capacity of the outputs ● with resistive load, max. 2 A ● on lamp load, max. 30 W with DC, 200 W with AC Output voltage ● Rated value (DC) 5V DC to 30V DC ● Rated value (AC) 5 V AC to 250 V AC Output current ● for signal "1" permissible range, max. 2 A Output delay with resistive load ● "0" to "1", max. 10 ms ● "1" to "0", max. 10 ms 6ES7223-1QH32-0XB0 Page 2/4 25.01.2016 Changes preserved © Copyright Siemens AG Total current of the outputs (per group) horizontal installation — up to 50 °C, max. 8 A; Current per mass Relay outputs ● Number of relay outputs 8 ● Rated supply voltage of relay coil L+ (DC) 24 V ● Number of operating cycles, max. mechanically 10 million, at rated load voltage 100 000 Switching capacity of contacts — with inductive load, max. 2 A — on lamp load, max. 30 W with DC, 200 W with AC — with resistive load, max. 2 A Cable length ● shielded, max. 500 m ● unshielded, max. 150 m Interrupts/diagnostics/status information Alarms Yes Diagnostic functions Yes Alarms ● Diagnostic alarm Yes Diagnostics indication LED ● for status of the inputs Yes ● for status of the outputs Yes ● for maintenance Yes ● Status indicator digital output (green) Yes ● Status indicator digital input (green) Yes Potential separation Potential separation digital inputs ● between the channels, in groups of 2 Potential separation digital outputs ● between the channels Relays ● between the channels, in groups of 2 ● between the channels and backplane bus 1500 V AC for 1 minute Permissible potential difference between different circuits 750 V AC for 1 minute Degree and class of protection Degree of protection acc. to EN 60529 ● IP20 Yes Standards, approvals, certificates CE mark Yes CSA approval Yes 6ES7223-1QH32-0XB0 Page 3/4 25.01.2016 Changes preserved © Copyright Siemens AG UL approval Yes cULus Yes FM approval Yes RCM (formerly C-TICK) Yes Marine approval ● Marine approval Yes Ambient conditions Free fall ● Fall height, max. 0.3 m; five times, in dispatch package Ambient temperature during operation ● permissible temperature range -20 °C to +60 °C horizontal mounting, -20 °C to 50 °C vertical mounting, 95% humidity, non-condensing ● min. -20 °C ● max. 60 °C; Number of simultaneously activated outputs: 4 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 8 at 55 °C horizontal or 45 °C vertical ● permissible temperature change 5°C to 55°C, 3°C / minute Ambient temperature during storage/transportation ● min. -40 °C ● max. 70 °C Air pressure acc. to IEC 60068-2-13 ● Storage/transport, min. 660 hPa ● Storage/transport, max. 1 080 hPa Relative humidity ● permissible range (without condensation) at 25 °C 95 % Connection method required front connector Yes Mechanics/material Enclosure material (front) ● Plastic Yes Dimensions Width 45 mm Height 100 mm Depth 75 mm Weights Weight, approx. 230 g last modified: 22.01.2016 6ES7223-1QH32-0XB0 Page 4/4 25.01.2016 Changes preserved © Copyright Siemens AG