6GK7343-1CX10-0XE0.

Data sheet product type designation 6GK7343-1CX10-0XE0 CP 343-1 Lean Communications processor CP 343-1 Lean for connection of SIMATIC S7-300 to Industrial Ethernet via TCP/IP and UDP, Multicast, SEND/RECEIVE with and without RFC1006, Fetch/ Write, S7 communication (server), PROFINET IO device integrated 2-port switch ERTEC 200, Module replacement without PG, SNMP diagnostics, initialization via LAN, 2x RJ45 connection for LAN with 10/100 Mbit/s transfer rate transfer rate ● at the 1st interface 10 ... 100 Mbit/s interfaces number of interfaces / according to Industrial Ethernet 2 number of electrical connections ● at the 1st interface / according to Industrial Ethernet 2 ● for power supply 1 type of electrical connection ● of Industrial Ethernet interface RJ45 port ● at the 1st interface / according to Industrial Ethernet RJ45 port type of electrical connection ● for power supply 2-pole plugable terminal block supply voltage, current consumption, power loss type of voltage / of the supply voltage DC supply voltage / 1 / from backplane bus 5V supply voltage 24 V supply voltage / external 24 V supply voltage / external / at DC / rated value 24 V relative positive tolerance / at DC / at 24 V 20 % relative negative tolerance / at DC / at 24 V 15 % consumed current ● from backplane bus / at DC / at 5 V / typical 0.2 A ● from external supply voltage / at DC / at 24 V / typical 0.16 A ● from external supply voltage / at DC / at 24 V / maximum 0.2 A power loss [W] 5.8 W ambient conditions ambient temperature ● for vertical installation / during operation 0 ... 40 °C ● for horizontally arranged busbars / during operation 0 ... 60 °C ● during storage -40 ... +70 °C ● during transport -40 ... +70 °C relative humidity ● at 25 °C / without condensation / during operation / maximum protection class IP 95 % IP20 design, dimensions and weights module format Compact module S7-300 single width width 40 mm 6GK73431CX100XE0 Page 1/4 5/30/2024 Subject to change without notice © Copyright Siemens height 125 mm depth 120 mm net weight 0.22 kg fastening method ● S7-300 rail mounting Yes performance data / open communication number of possible connections / for open communication / by means of SEND/RECEIVE blocks / maximum 8 data volume ● as user data per ISO on TCP connection / for open communication / by means of SEND/RECEIVE blocks / maximum 8 Kibyte ● as user data per TCP connection / for open communication / by means of SEND/RECEIVE blocks / maximum 8 Kibyte ● as user data per UDP connection / for open IE communication / by means of SEND/RECEIVE blocks / maximum 2 Kibyte number of Multicast stations 8 performance data / S7 communication number of possible connections / for S7 communication ● maximum 4 service ● of SIMATIC communication / as server Yes performance data / multi-protocol mode number of active connections / with multi-protocol mode 12 performance data / PROFINET communication / as PN IO controller product function / PROFINET IO controller No performance data / PROFINET communication / as PN IO device product function / PROFINET IO device Yes data volume ● as user data for input variables / as PROFINET IO device / maximum 512 byte ● as user data for output variables / as PROFINET IO device / maximum 512 byte ● as user data for input variables / for each sub-module as PROFINET IO device 240 byte ● as user data for output variables / for each sub-module as PROFINET IO device 240 byte ● as user data for the consistency area for each submodule 240 byte number of submodules / per PROFINET IO-Device 32 performance data / telecontrol protocol / is supported ● TCP/IP Yes product functions / management, configuration, engineering product function / MIB support Yes protocol / is supported ● SNMP v1 Yes ● DCP Yes ● LLDP Yes configuration software ● required STEP 7 V5.4 or higher / STEP 7 Professional V11 (TIA Portal) or higher identification & maintenance function ● I&M0 - device-specific information Yes ● I&M1 - higher level designation/location designation Yes product functions / diagnostics product function / web-based diagnostics Yes product functions / switch product feature / switch Yes product function ● switch-managed No ● with IRT / PROFINET IO switch No ● configuration with STEP 7 Yes 6GK73431CX100XE0 Page 2/4 5/30/2024 Subject to change without notice © Copyright Siemens product functions / redundancy product function ● ring redundancy Yes ● redundancy manager No protocol / is supported / Media Redundancy Protocol (MRP) Yes product functions / security product function ● password protection for Web applications No ● ACL - IP-based Yes ● ACL - IP-based for PLC/routing No ● switch-off of non-required services Yes ● blocking of communication via physical ports Yes ● log file for unauthorized access No product functions / time product function / SICLOCK support Yes product function / pass on time synchronization Yes protocol / is supported ● NTP Yes standards, specifications, approvals / hazardous environments certificate of suitability / CCC / for hazardous zone according to GB standard Yes; GB3836.1, GB3836.8 certificate of suitability / CCC / for hazardous zone according to GB standard / as marking Ex nA IIC T4 Gc further information / internet links internet link ● to web page: selection aid TIA Selection Tool https://www.siemens.com/tstcloud ● to website: Industrial communication https://www.siemens.com/simatic-net ● to web page: SiePortal https://sieportal.siemens.com ● to website: Image database https://www.automation.siemens.com/bilddb ● to website: CAx-Download-Manager https://www.siemens.com/cax ● to website: Industry Online Support https://support.industry.siemens.com security information security information Siemens provides products and solutions with industrial cybersecurity functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial cybersecurity concept. Siemens’ products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. For additional information on industrial cybersecurity measures that may be implemented, please visit www.siemens.com/cybersecurity-industry. Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Cybersecurity RSS Feed under https://www.siemens.com/cert. (V4.7) Approvals / Certificates General Product Approval Declaration of Conformity EMV For use in hazardous locations KC 6GK73431CX100XE0 Page 3/4 FM 5/30/2024 CCC-Ex Subject to change without notice © Copyright Siemens Marine / Shipping other Confirmation last modified: 6GK73431CX100XE0 Page 4/4 Environment Confirmation 5/17/2024 5/30/2024 Subject to change without notice © Copyright Siemens