6GK7543-1AX00-0XE0.

Data sheet product type designation 6GK7543-1AX00-0XE0 CP 1543-1 Communications processor CP 1543-1 for connection of SIMATIC S7-1500 to Industrial Ethernet, TCP/IP, ISO, UDP, S7 communication, IP Broadcast/ Multicast, security (VPN, Firewall) Diagnostics SNMPV1/V3, DHCP, FTP client/server, Email, IPv4/IPv6, IEEE 802.1X (radius), time-of-day synchronization via NTP, 1x RJ45 (10/100/1000 Mbit). transfer rate transfer rate ● at the 1st interface 10 ... 1000 Mbit/s interfaces number of interfaces / according to Industrial Ethernet 1 number of electrical connections ● at the 1st interface / according to Industrial Ethernet 1 type of electrical connection ● at the 1st interface / according to Industrial Ethernet RJ45 port supply voltage, current consumption, power loss type of voltage / of the supply voltage DC supply voltage / 1 / from backplane bus 15 V relative symmetrical tolerance / at DC ● at 15 V 3% consumed current ● from backplane bus / at DC / at 15 V / typical power loss [W] 0.35 A 5.3 W ambient conditions ambient temperature ● for vertical installation / during operation 0 ... 40 °C ● for horizontally arranged busbars / during operation 0 ... 60 °C ● during storage -40 ... +70 °C ● during transport -40 ... +70 °C relative humidity ● at 25 °C / without condensation / during operation / maximum protection class IP 95 % IP20 design, dimensions and weights module format Compact module S7-1500 single width width 35 mm height 142 mm depth 129 mm net weight 0.35 kg fastening method ● S7-1500 rail mounting Yes product features, product functions, product components / general number of units ● per CPU / maximum 8 ● note depending on CPU type 6GK75431AX000XE0 Page 1/4 5/18/2024 Subject to change without notice © Copyright Siemens performance data / open communication number of possible connections / for open communication ● by means of T blocks / maximum 118; depending on the system upper limit data volume ● as user data per ISO on TCP connection / for open communication / by means of T blocks / maximum number of Multicast stations 65536 byte 118 performance data / S7 communication number of possible connections / for S7 communication ● maximum 118; depending on the system upper limit performance data / multi-protocol mode number of active connections / with multi-protocol mode 118 performance data / IT functions number of possible connections ● as client / by means of FTP / maximum 32 ● as server / by means of FTP / maximum 16 number of possible connections ● as server / by means of HTTP / maximum 4 ● as email client / maximum 1 data volume / as user data for email / maximum 64 Kibyte performance data / telecontrol protocol / is supported ● TCP/IP Yes product functions / management, configuration, engineering product function / MIB support Yes protocol / is supported ● SNMP v1 Yes ● SNMP v3 Yes ● DCP Yes ● LLDP Yes configuration software ● required STEP 7 Professional V14 (TIA Portal) or higher identification & maintenance function ● I&M0 - device-specific information Yes ● I&M1 - higher level designation/location designation Yes product function / is supported / identification link Yes product functions / diagnostics product function / web-based diagnostics Yes; via S7-1500 CPU product functions / routing service / routing / note IP routing up to 1 Mbps product function ● static IP routing Yes ● static IP routing IPv6 No ● dynamic IP routing No ● dynamic IP routing IPv6 No protocol / is supported ● RIP v1 No ● RIPv2 No ● RIPnG for IPv6 No ● OSPFv2 No ● OSPFv3 for IPv6 No ● VRRP No ● VRRP for IPv6 No ● BGP No ● PPP No ● PPoE via DSL No product functions / security firewall version stateful inspection product function / with VPN connection IPSec type of encryption algorithms / with VPN connection AES-256, AES-192, AES-128, 3DES-168, DES-56 6GK75431AX000XE0 Page 2/4 5/18/2024 Subject to change without notice © Copyright Siemens type of authentication procedure / with VPN connection Preshared key (PSK), X.509v3 certificates type of hashing algorithms / with VPN connection MD5, SHA-1, SHA-256, SHA-384, SHA-512 number of possible connections / with VPN connection 16 product function ● IEEE 802.1x (radius) Yes ● password protection for Web applications No ● ACL - IP-based No ● ACL - IP-based for PLC/routing No ● switch-off of non-required services Yes ● blocking of communication via physical ports No ● log file for unauthorized access Yes product functions / time product function / SICLOCK support No product function / pass on time synchronization Yes protocol / is supported ● NTP Yes standards, specifications, approvals / hazardous environments certificate of suitability / CCC / for hazardous zone according to GB standard Yes; GB3836.1, GB3836.8 certificate of suitability / CCC / for hazardous zone according to GB standard / as marking Ex nA IIC T4 Gc standards, specifications, approvals / Environmental Product Declaration Environmental Product Declaration Yes Global Warming Potential [CO2 eq] ● total 187.85 kg ● during manufacturing 21.24 kg ● during operation 166.26 kg ● after end of life 0.35 kg further information / internet links internet link ● to web page: selection aid TIA Selection Tool https://www.siemens.com/tstcloud ● to website: Industrial communication https://www.siemens.com/simatic-net ● to web page: SiePortal https://sieportal.siemens.com ● to website: Image database https://www.automation.siemens.com/bilddb ● to website: CAx-Download-Manager https://www.siemens.com/cax ● to website: Industry Online Support https://support.industry.siemens.com security information security information Siemens provides products and solutions with industrial cybersecurity functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial cybersecurity concept. Siemens’ products and solutions constitute one element of such a concept. Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. For additional information on industrial cybersecurity measures that may be implemented, please visit www.siemens.com/cybersecurity-industry. Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Cybersecurity RSS Feed under https://www.siemens.com/cert. (V4.7) Approvals / Certificates General Product Approval Declaration of Conformity General Product Approval 6GK75431AX000XE0 Page 3/4 For use in hazardous locations 5/18/2024 Subject to change without notice © Copyright Siemens Miscellaneous For use in hazardous locations FM Marine / Shipping CCC-Ex Environment Confirmation last modified: 6GK75431AX000XE0 Page 4/4 5/17/2024 5/18/2024 Subject to change without notice © Copyright Siemens