6SL3210-1PE11-8AL1

Data sheet for SINAMICS Power module PM240-2 Article No. : 6SL3210-1PE11-8AL1 Client order no. : Order no. : Offer no. : Remarks : Figure similar Item no. : Consignment no. : Project : Rated data Ambient conditions Input Cooling Internal air cooling Number of phases 3 AC Cooling air requirement 0.005 m³/s (0.177 ft³/s) Line voltage 380 ... 480 V ±10 % Installation altitude 1,000 m (3,280.84 ft) Line frequency 47 ... 63 Hz Ambient temperature Rated current (LO) 2.30 A Operation LO -5 ... 40 °C (23 ... 104 °F) Rated current (HO) 2.00 A Operation HO -5 ... 50 °C (23 ... 122 °F) Transport -25 ... 55 °C (-13 ... 131 °F) Storage -25 ... 55 °C (-13 ... 131 °F) Output Number of phases 3 AC Rated voltage 400V IEC 480V NEC Rated power (LO) 0.55 kW 0.75 hp Rated power (HO) 0.37 kW 0.50 hp Rated current (LO) 1.70 A Rated current (HO) 1.30 A Max. output current 2.60 A 1) Relative humidity Max. operation 95 % RH, condensation not permitted Connections Line side Version Plug-in screw terminals Conductor cross-section 1.00 ... 2.50 mm² (AWG 18 ... AWG 14) Pulse frequency 4 kHz Output frequency for vector control 0 ... 200 Hz Motor end Output frequency for V/f control 0 ... 550 Hz Version Plug-in screw terminals Conductor cross-section 1.00 ... 2.50 mm² (AWG 18 ... AWG 14) Overload capability Low Overload (LO) Max. motor cable length 1.1 x rated output current (i.e. 110 % overload) for 57 s with a cycle time of 300 s 1.5 × rated output current (i.e. 150 % overload) for 3 s with a cycle time of 300 s Shielded 50 m (164.04 ft) Unshielded 100 m (328.08 ft) High Overload (HO) 1.5 × output current rating (i.e., 150 % overload) for 57 s with a cycle time of 300 s 2 × output current rating (i.e., 200 % overload) for 3 s with a cycle time of 300 s General tech. specifications Power factor λ 0.85 Offset factor cos φ 0.95 Efficiency η 0.96 Sound pressure level (1m) 72 dB Power loss 0.04 kW Filter class (integrated) Class A Mechanical data Degree of protection IP20 / UL open type Frame size FSA Net weight 1.50 kg (3.31 lb) Dimensions Width 73 mm (2.87 in) Height 196 mm (7.72 in) Depth 165 mm (6.50 in) Standards Compliance with standards UL, cUL, CE, C-Tick (RCM), SEMI F47 CE marking Low-voltage directive 2006/95/EC Technical data are subject to change! There may be discrepancies between calculated and rating plate values. Page 1 of 2 Generated Sun May 26 00:06:54 CET 2024 Data sheet for SINAMICS Power module PM240-2 Article No. : 6SL3210-1PE11-8AL1 Converter losses to IEC61800-9-2* Efficiency class IE2 Comparison with the reference converter (90% / 100%) 24.90 % I 30.3 W (2.60 %) 32.3 W (2.70 %) 26.7 W (2.30 %) 27.5 W (2.30 %) 28.4 W (2.40 %) 26.5 W (2.20 %) 26.9 W (2.30 %) 28.9 W (2.40 %) 100% 50% 25% 50% 90% f The percentage values show the losses in relation to the rated apparent power of the converter. The diagram shows the losses for the points (as per standard IEC61800-9-2) of the relative torque generating current (I) over the relative motor stator frequency (f). The values are valid for the basic version of the converter without options/components. *calculated values 1) The output current and HP ratings are valid for the voltage range 440V-480V Technical data are subject to change! There may be discrepancies between calculated and rating plate values. Page 2 of 2 Generated Sun May 26 00:06:54 CET 2024