6SL32105BE315CV0

Data sheet for SINAMICS V20 Article No. : 6SL3210-5BE31-5CV0 Client order no. : Order no. : Offer no. : Remarks : Figure similar Item no. : Consignment no. : Project : Rated data Ambient conditions Input Cooling External fan 1,000 m (3,280.84 ft) Number of phases 3 AC Installation altitude Line voltage 380 ... 480 V -15 % +10 % Ambient temperature Line frequency 47 ... 63 Hz Output Number of phases -10 ... 60 °C (14 ... 140 °F) Storage -40 ... 70 °C (-40 ... 158 °F) Relative humidity 3 AC Rated voltage Operation2) Max. operation 95 % 400V IEC 480V Rated power (LO) 15.00 kW 20.00 hp Rated power (HO) 15.00 kW 20.00 hp Rated current (LO) 31.00 A 31.00 A Shielded 25 m (82.02 ft) Rated current (HO) 31.00 A 31.00 A Unshielded 50 m (164.04 ft) Rated current (IN) 31.00 A Pulse frequency 4.00 kHz Output frequency 0 ... 550 Hz NEC 1) Connections Max. motor cable length Mechanical data Mounting position Through-hole mounting / wall mounting / side-by-side mounting Degree of protection IP20 / UL open type Low Overload (LO) Frame size FSD 110 % rated output current for 60 s, cycle time 300 s Net weight 4.30 kg (9.48 lb) High Overload (HO) Dimensions Overload capability 150 % rated output current for 60 s, cycle time 300 s General tech. specifications Power factor λ 0.72 Offset factor cos φ 0.95 Efficiency η 0.98 Filter class (integrated) Class A Width 240.0 mm (9.45 in) Height 206.5 mm (8.13 in) Depth 172.5 mm (6.79 in) Standards Compliance with standards CE, cULus, C-Tick (RCM), KC CE marking EN 61800-5-1 /EN 60204-1 and EN 61800-3 Communication Communication USS, Modbus RTU Inputs / outputs Standard digital inputs Number 4 Digital outputs Number as relay changeover contact 1 Number as transistor 1 Analog inputs Number 2 (Can be used as additional digital input) Analog outputs Number 1 Technical data are subject to change! There may be discrepancies between calculated and rating plate values. Page 1 of 2 Generated Fri May 10 22:37:07 CET 2024 Data sheet for SINAMICS V20 Article No. : 6SL3210-5BE31-5CV0 Converter losses to IEC61800-9-2* Efficiency class IE2 Comparison with the reference converter (90% / 100%) 38.0 % I 100% 50% 25% 309.0 W (1.4 %) 352.0 W (1.6 %) 423.0 W (2.0 %) 197.0 W (0.9 %) 213.0 W (1.0 %) 236.0 W (1.1 %) 158.0 W (0.7 %) 165.0 W (0.8 %) 50% 90% f The percentage values show the losses in relation to the rated apparent power of the converter. The diagram shows the losses for the points (as per standard IEC61800-9-2) of the relative torque generating current (I) over the relative motor stator frequency (f). The values are valid for the basic version of the converter without options/components. *calculated values 1) The output current and HP ratings are valid for the voltage range 440V-480V 2) Please observe derating at temperatures of 40 °C or above Technical data are subject to change! There may be discrepancies between calculated and rating plate values. Page 2 of 2 Generated Fri May 10 22:37:07 CET 2024