87LPU6MH

Data sheet US2:87LPU6MH Pump control panel, Size 5, Three phase full voltage, Solid-state overload relay, OLR amp range 55-250A, 440-480V 50-60Hz/DC coil, Standard type contactor, 400A circuit breaker, HOA Sel Sw. & Start P.B., Enclosure NEMA type 3/3R, Weather proof outdoor use product brand name Class 87 design of the product Pump control panel with MCP special product feature Gravity dropout contacts; 45 degree, wedge action contacts; Self-rising pressure type control terminals; Encapsulated coil General technical data weight [lb] Height x Width x Depth [in] 205 lb touch protection against electrical shock NA for enclosed products installation altitude [ft] at height above sea level maximum 6560 ft 72 × 20 × 11 in ambient temperature [°F] ● during storage -22 ... +149 °F ● during operation -4 ... +104 °F ambient temperature ● during storage -30 ... +65 °C ● during operation -20 ... +40 °C country of origin USA Horsepower ratings yielded mechanical performance [hp] for 3-phase AC motor ● at 200/208 V rated value 75 hp ● at 220/230 V rated value 100 hp ● at 460/480 V rated value 200 hp ● at 575/600 V rated value 200 hp Contactor size of contactor NEMA controller size 5 number of NO contacts for main contacts 3 operating voltage for main current circuit at AC at 60 Hz maximum 600 V operational current at AC at 600 V rated value 270 A mechanical service life (switching cycles) of the main contacts typical 10000000 Auxiliary contact number of NC contacts at contactor for auxiliary contacts 2 number of NO contacts at contactor for auxiliary contacts 2 number of total auxiliary contacts maximum 8 contact rating of auxiliary contacts of contactor according to UL 10A@240VAC (A300), 2.5A@250VDC (Q300) US2:87LPU6MH Page 1/2 12.19.2020 Subject to change without notice © Copyright Siemens Coil type of voltage of the control supply voltage AC/DC control supply voltage ● at DC rated value 440 ... 480 V ● at AC at 50 Hz rated value 440 ... 480 V ● at AC at 60 Hz rated value 440 ... 480 V holding power at AC minimum 7.4 W apparent pick-up power of magnet coil at AC 590 V·A apparent holding power of magnet coil at AC 6.7 V·A operating range factor control supply voltage rated value of magnet coil 0.85 ... 1.1 percental drop-out voltage of magnet coil related to the input voltage 60 % switch ON delay time 30 ... 95 ms OFF delay time 40 ... 80 ms Overload relay product function ● overload protection Yes ● phase failure detection Yes ● asymmetry detection Yes ● ground fault detection No ● test function Yes ● external reset Yes reset function Manual and automatic trip class CLASS 10 adjustable current response value current of the currentdependent overload release 55 ... 250 A product feature protective coating on printed-circuit board No number of NC contacts of auxiliary contacts of overload relay 1 number of NO contacts of auxiliary contacts of overload relay 1 operational current of auxiliary contacts of overload relay ● at AC at 600 V 5A ● at DC at 250 V 1A contact rating of auxiliary contacts of overload relay according to UL 5A@600VAC (B600), 1A@250VDC (R300) insulation voltage ● with single-phase operation at AC rated value 600 V ● with multi-phase operation at AC rated value 300 V Enclosure degree of protection NEMA rating of the enclosure NEMA 3/3R design of the housing Weather proof for outdoor use Standard Control Devices product component Hand-Off-Auto selector switch Yes type of Hand-Off-Auto selector switch 30mm metal housing with chrome finish product component start push button Yes type of start push button 30mm metal housing with chrome finish Circuit Breaker type of the motor protection Motor circuit protector (magnetic trip only) operational current of motor circuit breaker rated value 400 A adjustable current response value current of instantaneous short-circuit trip unit 2000 ... 4000 A Mounting/wiring mounting position Vertical fastening method Surface mounting and installation type of electrical connection for supply voltage line-side Box lug type of connectable conductor cross-sections at line-side at AWG cables single or multi-stranded 2x (3/0 ... 500 kcmil) or 2x (4/0 ... 500 kcmil) US2:87LPU6MH Page 2/3 12.19.2020 Subject to change without notice © Copyright Siemens temperature of the conductor for supply maximum permissible 75 °C material of the conductor for supply AL or CU type of electrical connection for load-side outgoing feeder Box lug tightening torque [lbf·in] for load-side outgoing feeder 180 ... 220 lbf·in type of connectable conductor cross-sections at AWG cables for load-side outgoing feeder single or multistranded 2x 2/0 AWG ... 500 MCM temperature of the conductor for load-side outgoing feeder maximum permissible 75 °C material of the conductor for load-side outgoing feeder CU type of electrical connection of magnet coil Screw-type terminals tightening torque [lbf·in] at magnet coil 7 ... 10 lbf·in type of connectable conductor cross-sections of magnet coil at AWG cables single or multi-stranded 2x (18 ... 14 AWG) temperature of the conductor at magnet coil maximum permissible 75 °C material of the conductor at magnet coil CU type of electrical connection at contactor for auxiliary contacts Screw-type terminals tightening torque [lbf·in] at contactor for auxiliary contacts 7 ... 10 lbf·in type of connectable conductor cross-sections at contactor at AWG cables for auxiliary contacts single or multistranded 2x (20 ... 16 AWG), 2x (18 ... 14 AWG) temperature of the conductor at contactor for auxiliary contacts maximum permissible 75 °C material of the conductor at contactor for auxiliary contacts CU type of electrical connection at overload relay for auxiliary contacts Screw-type terminals tightening torque [lbf·in] at overload relay for auxiliary contacts 7 ... 10 lbf·in type of connectable conductor cross-sections at overload relay at AWG cables for auxiliary contacts single or multistranded 2x (20 ... 14 AWG) temperature of the conductor at overload relay for auxiliary contacts maximum permissible 75 °C material of the conductor at overload relay for auxiliary contacts CU Short-circuit current rating design of the short-circuit trip Instantaneous trip circuit breaker breaking capacity maximum short-circuit current (Icu) ● at 240 V 100 kA ● at 480 V 100 kA ● at 600 V 25 kA certificate of suitability NEMA ICS 2; UL 508 Further information Industrial Controls - Product Overview (Catalogs, Brochures,…) www.usa.siemens.com/iccatalog Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/us/Catalog/product?mlfb=US2:87LPU6MH Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/US/en/ps/US2:87LPU6MH Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=US2:87LPU6MH&lang=en Certificates/approvals https://support.industry.siemens.com/cs/US/en/ps/US2:87LPU6MH/certificate US2:87LPU6MH Page 3/4 12.19.2020 Subject to change without notice © Copyright Siemens US2:87LPU6MH Page 4/5 12.19.2020 Subject to change without notice © Copyright Siemens last modified: 3/11/2020 US2:87LPU6MH Page 5/5 12.19.2020 Subject to change without notice © Copyright Siemens