A6X30143493

Data sheet 3SU1130-4BF11-3BA0-Z Y15 RONIS key-operated switch, 22 mm, round, plastic with metal front ring, lock number SB30, with 2 keys, 2 switch positions O-I, latching, actuating angle 90°, 10:30h/13:30h, key removal O+I, with holder, 1 NO, spring-type terminal, possible special locks: SB31, 421, 455, with laser labeling, upper case and lower case, always upper case at the beginning of the word product brand name SIRIUS ACT product designation Key-operated switches design of the product Complete unit product type designation 3SU1 product line Plastic with metal front ring, matt, 22 mm manufacturer's article number ● of included key 3SU1950-0FB80-0AA0 ● of supplied contact module 3SU1400-1AA10-3BA0 ● of supplied contact module at position 1 3SU1400-1AA10-3BA0 ● of the supplied holder 3SU1500-0AA10-0AA0 ● of the supplied actuator 3SU1030-4BF11-0AA0 Enclosure shape of the enclosure front round number of command points 1 Actuator principle of operation of the actuating element latching, 90° (10:30 h/13:30 h) product extension optional light source No color of the actuating element silver material of the actuating element metal shape of the actuating element Key outer diameter of the actuating element 29.5 mm marking of the actuating element Any inscription, text in upper/lower case, all words begin with upper case letters number of contact modules 1 number of switching positions 2 switch position for key distraction O+I actuating angle ● clockwise 90° lock make RONIS key number SB30 Front ring product component front ring Yes design of the front ring Standard material of the front ring Metal, matt color of the front ring sand gray Holder material of the holder 3SU11304BF113BA0-Z Y15 Page 1/2 Plastic 2.6.2021 Subject to change without notice © Copyright Siemens General technical data product function positive opening No product component light source No insulation voltage rated value 500 V degree of pollution 3 type of voltage of the operating voltage AC/DC surge voltage resistance rated value 6 kV protection class IP IP66, IP67, IP69(IP69K) ● of the terminal degree of protection NEMA rating IP20 1, 2, 3, 3R, 4, 4X, 12, 13 shock resistance ● acc. to IEC 60068-2-27 Sinusoidal half-wave 50g / 11 ms ● for railway applications acc. to DIN EN 61373 Category 1, Class B vibration resistance ● acc. to IEC 60068-2-6 10 ... 500 Hz: 5g ● for railway applications acc. to DIN EN 61373 Category 1, Class B operating frequency maximum 1 800 1/h mechanical service life (switching cycles) typical 300 000 electrical endurance (switching cycles) typical 10 000 000 thermal current 10 A reference code acc. to IEC 81346-2 S continuous current of the C characteristic MCB 10 A; for a short-circuit current smaller than 400 A continuous current of the quick DIAZED fuse link 10 A continuous current of the DIAZED fuse link gG 10 A operating voltage ● at AC — at 50 Hz rated value 5 ... 500 V — at 60 Hz rated value 5 ... 500 V ● at DC rated value 5 ... 500 V Power Electronics contact reliability One maloperation per 100 million (17 V, 5 mA), one maloperation per 10 million (5 V, 1 mA) Auxiliary circuit design of the contact of auxiliary contacts Silver alloy number of NC contacts for auxiliary contacts 0 number of NO contacts for auxiliary contacts 1 Connections/ Terminals type of electrical connection ● of modules and accessories Spring-type terminal type of connectable conductor cross-sections ● solid without core end processing 2x (0.25 ... 1.5 mm²) ● finely stranded with core end processing 2x (0.25 ... 0.75 mm²) ● finely stranded without core end processing 2x (0.25 ... 1.5 mm²) ● at AWG cables 2x (24 ... 16) tightening torque of the screws in the bracket 1 ... 1.2 N·m Ambient conditions ● ambient temperature during operation -25 ... +70 °C ● ambient temperature during storage -40 ... +80 °C environmental category during operation acc. to IEC 60721 3M6, 3S2, 3B2, 3C3, 3K6 (with relative air humidity of 10 ... 95 %, no condensation in operation permitted for all devices behind front panel) Installation/ mounting/ dimensions fastening method ● of modules and accessories Front plate mounting height 40 mm width 30 mm shape of the installation opening round mounting diameter 22.3 mm positive tolerance of installation diameter 0.4 mm 3SU11304BF113BA0-Z Y15 Page 2/3 2.6.2021 Subject to change without notice © Copyright Siemens mounting height 49.4 mm installation width 29.5 mm installation depth 49.7 mm Certificates/ approvals Further information Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3SU1130-4BF11-3BA0-Z Y15 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3SU1130-4BF11-3BA0-Z Y15 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3SU1130-4BF11-3BA0-Z Y15 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3SU1130-4BF11-3BA0-Z Y15&lang=en last modified: 3SU11304BF113BA0-Z Y15 Page 3/3 1/12/2021 2.6.2021 Subject to change without notice © Copyright Siemens