HiRel Silicon Schottky Diode
Features ¥ HiRel Discrete and Microwave Semiconductor ¥ Medium barrier diodes for detector and mixer applications ¥ Hermetically sealed microwave package ¥ qualified ¥ ESA/SCC Detail Spec. No.: 5106/014 ESD: Electrostatic discharge sensitive device, observe handling precautions! T
BAT 15
T1
Type BAT 15-013 (ql) Marking Ordering Code see below Pin Configuration Package T
BAT 15-014 (ql) BAT 15-033 (ql) BAT 15-034 (ql) BAT 15-043 (ql) BAT 15-044 (ql) BAT 15-063 (ql) BAT 15-064 (ql) BAT 15-073 (ql) BAT 15-074 (ql) BAT 15-093 (ql) BAT 15-094 (ql) BAT 15-103 (ql) BAT 15-104 (ql) BAT 15-113 (ql) BAT 15-114 (ql) BAT 15-123 (ql) BAT 15-124 (ql) (ql) Quality Level:
-
see below see below see below see below see below see below see below see below see below see below see below see below see below see below see below see below see below
see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 Ordering Code: Q62702A1178 Ordering Code: on request Ordering Code: on request Ordering Code: Q62702A1180
T1 T T1 T T1 T T1 T T1 T T1 T T1 T T1 T T1
P: Professional Quality, H: High Rel Quality, S: Space Quality, ES: ESA Space Quality, (see Chapter Order Instructions for ordering example)
Semiconductor Group
1
Draft A03 1998-04-01
BAT 15
Table 1 Parameter
Maximum Ratings Symbol Limit Values 3 100 100 50 50 50 Unit V mA
Reverse voltage Forward current BAT15-013, -014, -033, -034 BAT15-043, -044, -063, -064 BAT15-073, -074, -093, -094 BAT15-103, -104, -113, -114 BAT15-123, -124 Power dissipation BAT15-013, -014, -033, -034 BAT15-043, -044, -063, -064 BAT15-073, -074, -093, -094 BAT15-103, -104, -113, -114 BAT15-123, -124 Operating temperature range Storage temperature range Soldering temperature Burn-out energy 1) BAT15-013, -014, -033, -034 BAT15-043, -044, -063, -064 BAT15-073, -074, -093, -094 BAT15-103, -104, -113, -114 BAT15-123, -124
1)
VR IF
Ptot
100 100 50 50 50
mW
Top Tstg Tsol EB
- 55 to + 150 - 65 to + 175 + 220 5.0 5.0 2.0 2.0 1.0
°C °C °C Erg
Quoted for a single discharge of torry line during the first 2.4 ns current flow in the forward direction. General criterion for burn-out energy is a 3 dB increase in noise figure.
Semiconductor Group
2
Draft A03 1998-04-01
BAT 15
Electrical Characteristics Table 2 Parameter Breakdown voltage IR = 10 mA Reverse current DC Characteristics at TA = 25 °C unless otherwise specified Symbol min. Limit Values typ. max. V mA 5 5 5 1 1 V 0.15 0.17 0.18 0.19 0.20 V 0.23 0.27 0.29 0.30 0.31 0.28 0.30 0.31 0.32 0.33 3 Unit
V(BR) IR
VR = 2 V
BAT15-013, -014, -033, -034 BAT15-043, -044, -063, -064 BAT15-073, -074, -093, -094 BAT15-103, -104, -113, -114 BAT15-123, -124 Forward voltage 1 IF1 = 0.01 mA BAT15-013, -014, -033, -034 BAT15-043, -044, -063, -064 BAT15-073, -074, -093, -094 BAT15-103, -104, -113, -114 BAT15-123, -124 Forward voltage 2 IF2 = 1 mA BAT15-013, -014, -033, -034 BAT15-043, -044, -063, -064 BAT15-073, -074, -093, -094 BAT15-103, -104, -113, -114 BAT15-123, -124
VF1
VF2
Semiconductor Group
3
Draft A03 1998-04-01
BAT 15
Table 2 Parameter
DC Characteristics at TA = 25 °C unless otherwise specified (contÕd) Symbol min.
2)
Limit Values typ. max.
Unit W
Series resistance IF1 = 10 mA, IF2 = 50 mA BAT15-013, -014 BAT15-033, -034 BAT15-043, -044 BAT15-063, -064 BAT15-073, -074 BAT15-093, -094 BAT15-103, -104 BAT15-113, -114 BAT15-123, -124
2)
RF
3.0 4.0 3.5 4.5 4.5 5.5 6.0 7.0 8.0 3.5 4.5 4.0 5.0 5.5 6.5 7.0 8.0 9.0
DV F R F = ------------------------ W Ð3 40 ´ 10
Semiconductor Group
4
Draft A03 1998-04-01
BAT 15
Table 3 Parameter
AC Characteristics at TA = 25 °C unless otherwise specified Symbol min. Limit Values typ. max. pF NF 0.35 0.30 0.27 0.23 0.20 0.60 0.35 0.30 0.25 0.22 dB Unit
Total capacitance VR = 0 V, f = 1 MHz BAT15-013, -014, -033, -034 BAT15-043, -044, -063, -064 BAT15-073, -074, -093, -094 BAT15-103, -104, -113, -114 BAT15-123, -124 Noise figure I.F. = 30 MHz LO power = 0 dBm LO = 9.375 GHz BAT15-013, -014 BAT15-033, -034 BAT15-043, -044 BAT15-063, -064 BAT15-073, -074 BAT15-093, -094 BAT15-103, -104 BAT15-113, -114 BAT15-123, -124
CT
-
5.3 6.3 5.3 6.3 5.3 6.3 5.7 7.2 8.0
5.5 6.5 5.5 6.5 5.5 6.5 6.0 7.5 9.0
Semiconductor Group
5
Draft A03 1998-04-01
BAT 15
Order Instructions Full type variant including type variant and quality level must be specified by the orderer. For HiRel Discrete and Microwave Semiconductors the ordering code specifies device family and quality level only. Ordering Form: Ordering Code: QÉ BAT15- (x) (ql) (x): Type Variant (ql): Quality Level Ordering Example: Ordering Code: Q62702A1180 BAT15-014 ES For BAT15-014 in T1 Package; ESA Space Quality Level Further Information See our WWW-Pages: Ð Discrete and RF-Semiconductors (Small Signal Semiconductors) www.siemens.de/semiconductor/products/35/35.htm Ð HiRel Discrete and Microwave Semiconductors www.siemens.de/semiconductor/products/35/353.htm Please contact also our marketing division: Tel.: ++89 6362 4480 Fax.: ++89 6362 5568 e-mail: martin.wimmers@hl.siemens.de
Semiconductor Group
6
Draft A03 1998-04-01
BAT 15
Figure 1 Symbol
T Package Millimetre min. max. 1.45 1.35 0.40 1.30 1.15 -
A B C
Semiconductor Group
7
Draft A03 1998-04-01
BAT 15
Figure 2 Symbol
T1 Package Millimetre min. max. 1.45 1.35 0.40 0.50 0.30 0.10 0.60 1.30 1.15 0.10 0.06 5.50 0.40
A B C D E F G H
Semiconductor Group
8
Draft A03 1998-04-01
