C67076-S1018-A2

SIMOPAC® Module BSM 101 AR VDS = 50 V ID = 200 A R DS(on) = 3.0 mΩ q q q q q q Power module Single switch N channel Enhancement mode Package with insulated metal base plate 1) Package outline/Circuit diagram: 1 Type BSM 101 AR Maximum Ratings Parameter Drain-source voltage Ordering Code C67076-S1018-A2 Symbol Values 50 50 ± 20 200 600 – 55 … + 150 700 ≤ 0.18 2500 16 11 F 55/150/56 Unit V VDS VDGR VGS ID ID puls Tj, Tstg Ptot RthJC Vis – – – – Drain-gate voltage, RGS = 20 kΩ Gate-source voltage Continuous drain current, TC = 105 ˚C Pulsed drain current, TC = 105 ˚C Operating and storage temperature range Power dissipation, TC = 25 ˚C Thermal resistance, chip-case Insulation test voltage , t = 1 min. 2) A ˚C W K/W Vac mm – Creepage distance, drain-source Clearance, drain-source DIN humidity category, DIN 40 040 IEC climatic category, DIN IEC 68-1 1) 2) See chapter Package Outline and Circuit Diagrams. Insulation test voltage between drain and base plate referred to standard climate 23/50 in acc. with DIN 50 014, IEC 146, para. 492.1. Semiconductor Group 17 03.96 BSM 101 AR Electrical Characteristics at Tj = 25 ˚C, unless otherwise specified. Parameter Symbol min. Static Characteristics Drain-source breakdown voltage VGS = 0, ID = 0.25 mA Gate threshold voltage VGS = VDS, ID = 1 mA Zero gate voltage drain current VDS = 50 V, VGS = 0 Tj = 25 ˚C Tj = 125 ˚C Gate-source leakage current VGS = 20 V, VDS = 0 Drain-source on-state resistance VGS = 10 V, ID = 200 A Dynamic Characteristics Forward transconductance Values typ. max. Unit V(BR)DSS 50 – 3.0 – 4.0 V VGS(th) 2.1 I DSS – – 50 300 10 2.6 250 1000 µA IGSS – 100 nA mΩ – 3.0 R DS(on) VDS ≥ 2 × ID × RDS(on) max., ID = 200 A Input capacitance VGS = 0, VDS = 25 V, f = 1 MHz Output capacitance VGS = 0, VDS = 25 V, f = 1 MHz Reverse transfer capacitance VGS = 0, VDS = 25 V, f = 1 MHz Turn-on Time ton (ton = td (on) + tr) VCC = 40 V, VGS = 10 V ID = 200 A, RG = 3.3 Ω Turn-off Time toff (toff = td (off) + tf) VCC = 40 V, VGS = 10 V ID = 200 A, RG = 3.3 Ω gfs Ciss Coss Crss td (on) tr td (off) tf 156 – – – – – – – 200 18 9 3 280 220 220 60 – 24 12 4 – – – – S nF ns Semiconductor Group 18 BSM 101 AR Electrical Characteristics (cont’d) at Tj = 25 ˚C, unless otherwise specified. Parameter Symbol min. Reverse diode Continuous reverse drain current TC = 25 ˚C Pulsed reverse drain current TC = 25 ˚C Diode forward on-voltage IF = 400 A , VGS = 0 Reverse recovery time Values typ. max. Unit IS – – – 1.25 200 600 A ISM – VSD 1.6 V ns 400 – µC 3.5 IF = IS, diF/dt = 100 A/µs, VR = 30 V Reverse recovery charge IF = IS, diF/dt = 100 A/µs, VR = 30 V trr Qrr Semiconductor Group 19 BSM 101 AR Characteristics at Tj = 25 ˚C, unless otherwise specified. Power dissipation Ptot = f (TC) parameter: Tj = 150 ˚C Typ. output characteristics ID = f (VDS) parameter: = 80 µs pulse test Safe operating area ID = f (VDS) parameter: single pulse, TC = 25 ˚C, Tj ≤ 150 ˚C Typ. transfer characteristic ID = f (VGS) parameter: = 80 µs pulse test, VDS = 25 V Semiconductor Group 20 BSM 101 AR Continuous drain-source current ID = f (TC) parameter: VGS ≥ 10 V, T j = 150 ˚C Drain-source breakdown voltage V(BR)DSS = b × V(BR)DSS (25 ˚C) Drain source on-state resistance RDS(on) = f (ID) parameter: VGS Drain source on-state resistance RDS (on) = f (Tj) parameter: ID = 200 A; VGS = 10 V Semiconductor Group 21 BSM 101 AR Typ. capacitances C = f (VDS) parameter: VGS = 0, f = 1 MHz Gate threshold voltage VGS(th) = f (Tj) parameter: VDS = VGS, ID = 1 mA (spread) Semiconductor Group 22 BSM 101 AR Transient thermal impedance ZthJC = f (tp) parameter: D = tp/T Typ. gate charge VGS = f (QGate) parameter: IDpuls = 330 A Semiconductor Group 23