LCE00C005480A

厂商：
SIEMENS(西门子)
封装：
描述：
CONTACTOR,LTG,EH,OPEN,30A,0NC,5N

数据手册：

下载LCE00C005480A.pdf

立即购买

详情介绍
数据手册
价格&库存

LCE00C005480A 数据手册

Data sheet US2:LCE00C005480A Electrically held lighting contactor, (convertible to mech. held), Amp rating 30A (tungsten 20A), 0 N.C. / 5 N.O. poles, 460-480V 60Hz/440V 50Hz coil, Non-combination type, Enclosure NEMA type (open), No enclosure product brand name Class LC design of the product Electrically held lighting contactor (convertible to mechanically held) special product feature Electrically held convertible to mechanically held; Power poles convertible between NO and NC General technical data weight [lb] Height x Width x Depth [in] 3 lb touch protection against electrical shock Main circuit (finger-safe); Control circuit (finger-safe) installation altitude [ft] at height above sea level maximum 6560 ft 7.39 × 4.18 × 3.86 in ambient temperature [°F] ● during storage -22 ... +149 °F ● during operation -13 ... +104 °F ambient temperature ● during storage -30 ... +65 °C ● during operation -25 ... +40 °C country of origin USA Contactor size of contactor 30 Amp number of NO contacts for main contacts 5 number of NC contacts for main contacts 0 operating voltage for main current circuit at AC at 60 Hz maximum 600 V mechanical service life (switching cycles) of the main contacts typical 100000 contact rating of the main contacts of lighting contactor ● at tungsten (1 pole per 1 phase) rated value 20A @277V 1p 1ph ● at tungsten (2 poles per 1 phase) rated value 20A @480V 2p 1ph ● at tungsten (3 poles per 3 phases) rated value 20A @480V 3p 3ph ● at ballast (1 pole per 1 phase) rated value 30A @347V 1p 1ph ● at ballast (2 poles per 1 phase) rated value 30A @600V 2p 1ph ● at ballast (3 poles per 3 phases) rated value 30A @600V 3p 3ph ● at resistive load (1 pole per 1 phase) rated value 30A @600V 1p 1ph ● at resistive load (2 poles per 1 phase) rated value 30A @600V 2p 1ph ● at resistive load (3 poles per 3 phases) rated value 30A @600V 3p 3ph Auxiliary contact number of NC contacts for auxiliary contacts 0 number of NO contacts for auxiliary contacts 0 US2:LCE00C005480A Page 1/2 1.22.2021 Subject to change without notice © Copyright Siemens number of total auxiliary contacts maximum 4 contact rating of auxiliary contacts of contactor according to UL NA Coil type of voltage of the control supply voltage AC control supply voltage ● at AC at 50 Hz rated value 440 V ● at AC at 60 Hz rated value 460 ... 480 V apparent pick-up power of magnet coil at AC 248 V·A apparent holding power of magnet coil at AC 28 V·A operating range factor control supply voltage rated value of magnet coil 0.85 ... 1.1 Enclosure degree of protection NEMA rating of the enclosure Open device (no enclosure) design of the housing NA Mounting/wiring mounting position Vertical fastening method Surface mounting and installation type of electrical connection for supply voltage line-side Screw-type terminals tightening torque [lbf·in] for supply 35 ... 35 lbf·in type of connectable conductor cross-sections at line-side at AWG cables single or multi-stranded 2x (14 ... 8 AWG) temperature of the conductor for supply maximum permissible 75 °C material of the conductor for supply CU type of electrical connection for load-side outgoing feeder Screw-type terminals tightening torque [lbf·in] for load-side outgoing feeder 35 ... 35 lbf·in type of connectable conductor cross-sections at AWG cables for load-side outgoing feeder single or multistranded 2x (14 ... 8 AWG) temperature of the conductor for load-side outgoing feeder maximum permissible 75 °C material of the conductor for load-side outgoing feeder CU type of electrical connection of magnet coil Screw-type terminals tightening torque [lbf·in] at magnet coil 15 ... 15 lbf·in type of connectable conductor cross-sections of magnet coil at AWG cables single or multi-stranded 2x (18 ... 14 AWG) temperature of the conductor at magnet coil maximum permissible 75 °C material of the conductor at magnet coil CU Short-circuit current rating design of the fuse link for short-circuit protection of the main circuit required 100kA@600V (Class R or J 40A max) design of the short-circuit trip Thermal magnetic circuit breaker breaking capacity maximum short-circuit current (Icu) ● at 240 V 24 kA ● at 480 V 65 kA ● at 600 V 25 kA certificate of suitability NEMA ICS 2; UL 508 Further information Industrial Controls - Product Overview (Catalogs, Brochures,…) www.usa.siemens.com/iccatalog Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/us/Catalog/product?mlfb=US2:LCE00C005480A Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/US/en/ps/US2:LCE00C005480A Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=US2:LCE00C005480A&lang=en Certificates/approvals https://support.industry.siemens.com/cs/US/en/ps/US2:LCE00C005480A/certificate US2:LCE00C005480A Page 2/3 1.22.2021 Subject to change without notice © Copyright Siemens US2:LCE00C005480A Page 3/4 1.22.2021 Subject to change without notice © Copyright Siemens last modified: US2:LCE00C005480A Page 4/4 3/11/2020 1.22.2021 Subject to change without notice © Copyright Siemens

下载 PDF

LCE00C005480A

物料型号为US2:LCE00C005480A，是西门子生产的一款电保持式照明接触器，可转换为机械保持。

器件简介：该接触器设计为电保持照明接触器，可转换为机械保持，主电路具有5个常开（NO）极和0个常闭（NC）极。

引脚分配：主电路有5个常开触点，没有常闭触点；辅助触点最多有4个，但具体常开或常闭触点数量未说明。

参数特性：该接触器的额定电流为30A（钨丝灯20A），线圈电压为460-480V 60Hz或440V 50Hz，且适用于非组合式使用。

线圈的吸合功率为248V-A，保持功率为28V·A。

功能详解：接触器具有电保持功能，可转换为机械保持，主电路触点在钨丝灯下额定值为20A，而在电阻负载下为30A。

线圈的控制电源电压为交流电，频率50Hz时额定值为440V，60Hz时为460-480V。

应用信息：适用于需要远程控制和自动操作的照明系统。

封装信息：接触器的封装为NEMA开放式，无额外外壳，安装方式为垂直安装，表面安装和固定。

以上信息提供了该接触器的详细规格和应用场景。