Micro Battery
Product Catalogue
2017
A few decades ago, we commercialized
a highly reliable silver oxide battery to meet
the requirement of quartz watch
development. Since then, we have
expanded our microbattery offering and
technology to support the increased
diversity in electronic products available
today.
This brochure introduces manganese silicon
lithium rechargeable batteries, titanium
silicon lithium rechargeable batteries, and
reflowable capacitors, and silver oxide
batteries.
We plan to continuously develop higher
performance microbatteries and widen our
products lineup to keep up with our
emerging technologies.
Please feel free to contact us with any
questions you may have.
FEATURES
1. Superior leakage resistance
Even a slight leakage from a battery may interfere with the connections
made by the battery terminals, resulting in unstable device operation.
Seiko Instruments Inc. offers micro batteries that are highly
leak-resistant due to special sealing materials and processing
technologies.
CONTENTS
Microbattery and Capacitor Lineup .................
3
Charging Circuit ..............................................
5
MS Lithium Rechargeable Battery ..................
6
MS Lithium Rechargeable Battery
.......................... 10
TS Lithium Rechargeable Battery .................. 12
ML Lithium Rechargeable Battery .................. 14
CPX Capacitor
......... 15
CPH Capacitor ............................................... 16
Mercury Free Silver Oxide Battery ................. 18
Selection Check Sheet ................................... 20
Environmental Activities ................................. 21
Precautions for Your Safety ............................ 22
2. Large capacity
In order to extend the operating time of devices with limited battery
space, the market demands high volumetric efficiency.
We offer large-capacity microbatteries developed with proprietary
technology utilizing high-purity materials.
3. Stable operating voltage
Carefully compounded ingredients allow each of our micro batteries to
have a stable operating voltage over both a wide temperature range
and depth of discharge.
4. High reliability
Our micro batteries are manufactured under an integrated system
featuring strict quality control, which starts with component
manufacturing, through assembly and on to rigorous out-going
inspection.
Microbattery and Capacitor Lineup
MICROBATTERY AND CAPACITOR FEATURES
MS lithium rechargeable battery :
TS lithium rechargeable battery :
ML lithium rechargeable battery :
CPX capacitor :
CPH capacitor :
3V type. Large capacity and high cycle life characteristics in a compact body with
excellent overdischarge characteristics featured.
MS-T series offers wider operating temperature range, -40℃ to 85℃.
1.5V type. Charge voltage range from 1.5V to 3.0V is supported while high
reliability is maintained.
Reflowable lithium rechargeable battery. Nominal capacity 1.0mAh. 3.1V charge
(maximum).
Low ESR, low leak current chip type Electric Double Layer Capacitor.
Discharge by larger current is possible. Charge by very small power source with
several micro watts is possible. (Energy harvesting.)
Small and thin size chip type Electric Double Layer Capacitor.
Excellent long term reliability, humidity resistance achieved by its superior air-tight
packaging.
Rechargeable battery and capacitor sizes
*The rectangle and circles in the table show actual battery and capacitor sizes.
MS621FE
TS621E
MS621T
2.1mm
MS518SE
Height
1.8mm
1.4mm
MS414GE
ML414H
1.2mm
MS412FE
0.9mm
MS920SE
TS920E
MS920T
MS614SE
CPH3225A
CPX3225A
Chip type
3.2mm × 2.5mm
Φ4.8mm
Φ5.8mm
Φ6.8mm
Φ9.5mm
SIZE Diameter
Applications
Smartphone
Digital still camera
Tablet
Video camera
GPS·Car navigation system
Watch
Micro Battery 2017
3
Microbattery and Capacitor Lineup
Example of a recommended application circuit: for RTC backup
VCC
Main power
supply
VR
S-13R1*
VDD
SCL
CPU
SDA
RTC
S-35390A
INT1
INT2
MS414GE
3V/2.0mAh
SSP-T7-F
MS614SE
3V/3.4mAh
VCC
Reference: 4pF
Temperature
sensor
* Reverse Current Protection CMOS Voltage Regulator S-13R1, made by SII Semiconductor Corporation.
* This circuit diagram is a reference example. See the data sheet of each product before using it.
Example of RTC backup time, using MS414GE/MS614SE
RTC used: CMOS real time clock IC S-35390A,
made by SII Semiconductor Corporation.
Clock operating voltage: 1.1 to 5.5V,
current consumption: 0.25μA
Crystal used: SSP-T7-FL, made by Seiko Instruments Inc.
CL = 6.0pF, R1 = 65kΩ max.
3.5
Battery voltage (V)
3.0
2.5
2.0
MS414GE
1.5
1.0
MS614SE
RTC operable voltage
0.5
0.0
0
5,000
Discharge Time (hours)
10,000
One year (8,760 hours)
* This graph is a rough indication. The operating time varies depending on the actual service conditions.
4
Micro Battery 2017
Charging Circuit
1. Charging circuit for MS / ML / TS Lithium Rechargeable Battery
Resistor to regulate
the charging current
Diode
Vo
Vf
Power
Source
Vo
MS / ML / TS Battery
The charging voltage “Vo” must Not be higher than 3.3V (MS series) / 3.1V (ML414H) / 3.0V (TS series).
A resistor must be inserted to regulate the charging current, because our rechargeable batteries have a limit for charging
current.
Please see the below table for recommended resister values.
Those values are minimum for each battery type and “Vo” in the charging circuit.
For example, MS614SE and Vo 3.3V, the resister value should be 620 ohm or more.
• MS lithium rechargeable battery / ML lithium rechargeable battery
MS414GE
MS412FE
MS518SE
MS614SE
Resistor
(ohm)
2,000
1,600
1,600
1,500
1,500
1,500
Resistor
(ohm)
2,000
1,600
1,600
1,500
1,500
1,500
Resistor
(ohm)
1,500
1,000
820
750
750
750
Resistor
(ohm)
620
430
330
300
300
300
Vo
(V)
3.3
3.2
3.1
3.0
2.9
2.8
• TS lithium rechargeable battery
Vo
(V)
3.0
2.9
2.8
2.7
2.6
2.5
TS621E
Resistor
(ohm)
10,000
10,000
9,100
9,100
8,200
7,500
TS920E
Resistor
(ohm)
12,000
11,000
11,000
10,000
10,000
9,100
Vo
(V)
2.4
2.3
2.2
2.1
2.0
1.9
TS621E
Resistor
(ohm)
7,500
6,800
6,200
5,600
5,100
4,700
TS920E
Resistor
(ohm)
9,100
8,200
7,500
7,500
6,800
6,200
MS621FE
MS621T
Resistor
(ohm)
620
430
330
300
300
300
Vo
(V)
1.8
1.7
1.6
1.5
MS920SE
MS920T
Resistor
(ohm)
620
430
330
300
300
300
Resistor
(ohm)
prohibited
prohibited
3,000
3,000
3,000
3,000
TS621E
Resistor
(ohm)
4,300
3,600
3,000
2,700
TS920E
Resistor
(ohm)
5,600
5,100
4,700
4,300
ML414H
Please use a diode that has very low Vf (forward voltage drop), to prevent losing the actual charging voltage to battery.
Discharge capacity depends on charging voltage.
Lower charging voltage may cause lower discharge capacity.
Please see Charge Voltage Characteristics data for respective battery series. (Page 7, Page 10, and Page 13)
2. Charging circuit for CPH capacitor
Diode
Vo
Power
Source
Vo
Vf
CPH Capacitor
You do not need to insert a resister to regulate charging current.
Our CPH capacitor do not have a limit for charging current.
The charging voltage "Vo" must Not be higher than 3.3V.
Please use a diode that has very low Vf (forward voltage drop), to prevent losing the actual charging voltage to capacitor.
This guidance is for CPH capacitors.
For CPX capacitor or other capacitors, please contact us.
Micro Battery 2017
5
MS Lithium Rechargeable Battery
3V Type
MS414GE / MS412FE / MS518SE / MS614SE / MS621FE / MS920SE
FEATURES
MS (Manganese Silicon) lithium rechargeable batteries,
developed by Seiko Instruments Inc., use silicon oxide
as the anode and a lithium manganese composite oxide
as the cathode. As a result, they offer long cycle life and
highly stable overdischarge characteristics.
APPLICATIONS
Negative
cap
Gasket
Negative
electrode
Backup power for Real Time Clock, or memory
Security Camera, Digital Camera, Action Camera, GPS
equipments, Event Data Recorder, Handy Terminal, PC,
Smart phone.
Separater
Positive
electrode
• Large discharge capacity :
For high operational voltage range of 3.3V to 2.0V.
• Long cycle life :
Cycle life of over 100 cycles (over 50 cycles for
MS414GE) under charge/discharge conditions of 3.1V to
2.0V (D.O.D.100%).
• Excellent overdischarge characteristics :
Continued stable capacity characteristics even after the
battery is overdischarged down to 0.0V.
• Operation over a wide temperature range:
Operating temperature range : −20°C to +60°C
Consult us for using the battery at a temperature beyond
the above temperature range.
• RoHS Compliant
• Approved by UL (Underwriters Laboratories Inc.)
UL File No. MH15628
Positive
case
SPECIFICATIONS
Type
Charge Voltage
Nominal
(Standard
Voltage
Charge Voltage)*6
(V)
(V)
Nominal
Capacity
(mAh)*1
Internal
Impedance
(Ω)*2
Cycle Life (Time)*4
Size (mm)
Maximum
Standard
Discharge
100%*5
20%*5
Discharge
Current
D.O.D.
D.O.D.
Current
(Continuous) (Depth of (Depth of Diameter Height
(mA)
*3
(mA)
Discharge) Discharge)
Weight
(g)
MS414GE
3
2.8 to 3.3 (3.1)
2.0
100
0.010
0.05
50
500
4.8
1.4
0.08
MS412FE
3
2.8 to 3.3 (3.1)
1.0
100
0.010
0.10
100
1000
4.8
1.2
0.07
MS518SE
3
2.8 to 3.3 (3.1)
3.4
60
0.010
0.15
100
1000
5.8
1.8
0.13
MS614SE
3
2.8 to 3.3 (3.1)
3.4
80
0.015
0.25
100
1000
6.8
1.4
0.17
MS621FE
3
2.8 to 3.3 (3.1)
5.5
80
0.015
0.25
100
1000
6.8
2.1
0.23
MS920SE
3
2.8 to 3.3 (3.1)
11.0
35
0.050
0.80
100
1000
9.5
2.1
0.47
*1.
*2.
*3.
*4.
*5.
*6.
Nominal capacity: Typical value of discharge capacity between 3.1V and 2.0V
Internal impedance is measured using an AC (Alternating Current) method at the fully charged state.
Maximum discharge current indicates the value of a current for approximately 50% of the nominal capacity.
Cycle Life indicates the times charge/discharge is repeated for approximately 50% of the capacity values in the specification sheet.
100% and 20% are based on nominal capacity.
A constant voltage charge is recommended, but due to a limit in charge current, it is necessary to insert a resistor to regulate the
charge current.
Please see Page 5 for resister value. Contact us for further details.
If a constant current charge is required, contact us for more information.
MS Lithium Rechargeable Batteries are not reflowable. Please mount them on PCB by hand soldering.
6
Micro Battery 2017
MS Lithium Rechargeable Battery
3V Type
DISCHARGE CHARACTERISTICS (CHARGE VOLTAGE DEPENDENCE)
MS414GE
MS412FE
3.5
3.5
Charge: max. 0.025mA/72 hours (CC/CV)
Discharge: 10µA/c.o.v. = 2.0V (CC)
Charge: max. 0.05mA/60 hours (CC/CV)
Discharge: 10 µA/c.o.v. = 2.0V (CC)
3.0
Voltage (V)
Voltage (V)
3.0
2.5
3.1V
2.0
2.0
2.8V 2.9V 3.0V
3.3V
1.5
0.0
0.5
1.0
1.5
2.5
2.0
2.8V
1.5
0.0
2.5
0.2
0.4
0.6
1.0
1.2
1.4
1.6
MS614SE
MS518SE
3.5
3.5
Charge: max. 0.1mA/96 hours (CC/CV)
Discharge: 15µA/c.o.v. = 2.0V (CC)
Charge: max. 0.06mA/72 hours (CC/CV)
Discharge: 10 µA/c.o.v. = 2.0V (CC)
3.0
Voltage (V)
3.0
Voltage (V)
3.0V
2.9V
Capacity (mAh)
Capacity (mAh)
2.5
2.0
1.5
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.1V
2.0
2.9V 3.0V
3.1V
3.3V
2.8V
3.3V
2.5
2.8V
1.5
0.0
3.5
1.0
2.9V
2.0
3.0V
3.0
4.0
Capacity (mAh)
Capacity (mAh)
MS621FE
MS920SE
3.5
3.5
Charge: max. 0.1mA/96 hours (CC/CV)
Discharge: 15µA/c.o.v. = 2.0V (CC)
Charge: max. 0.2mA/96 hours (CC/CV)
Discharge: 50µA/c.o.v. = 2.0V (CC)
3.0
3.0
3.1V
2.5
2.9V
2.0
1.5
0.0
3.3V
2.8V
2.0
Capacity (mAh)
3.1-3.3V
2.5
2.0
3.0V
4.0
Voltage (V)
Voltage (V)
0.8
3.3V
3.1V
6.0
1.5
0.0
2.8V
2.0
4.0
6.0
2.9V
8.0
3.0V
10.0
12.0
Capacity (mAh)
* c.o.v. : Cut off Voltage
Micro Battery 2017
7
MS Lithium Rechargeable Battery
3V Type
CHARACTERISTICS
MS614SE
Charge/discharge characteristics
Discharge Characteristics at Various Discharge Current
3.5
3.5
Charge: max. 0.1mA/3.1V, 96 hours (CC/CV)
Discharge: respective current/c.o.v. = 1.5V (CC)
3.0
Voltage (V)
Voltage (V)
3.0
2.5
2.0
1.5
1.0
0.0
10µA
5µA
2.5
2.0
Charge: max. 0.1mA/3.1V, 96 hours (CC/CV)
Discharge: 15µA/c.o.v. = 1.5V (CC)
1.0
2.0
3.0
1.5
0.0
4.0
300µA
1.0
Capacity (mAh)
Voltage (V)
3.0
Overdischarge Characteristics
2.0
3.0
2.5
−20°C
2.0
1.5
0.0
4.0
25°C
40°C
1.0
1.5
0.0
3.0
20 days
1.0
Initial
100 days
2.0
Capacity (mAh)
8
3.5
Voltage (V)
Voltage (V)
2.5
150 days
200 days
2.0
3.0
4.0
Floating Characteristics (60°C, applied voltage 3.1V)
Storage condition: respective period at 60°C
[Capacity measurement conditions]
Charge: max. 0.1mA/3.1V, 96 hours (CC/CV)
Discharge: 15µA/c.o.v. = 2.0V (CC)
2.0
60°C
0°C
Capacity (mAh)
High Temperature (60°C) Storage Characteristics
3.0
4.0
Discharge Temperature Characteristics
Capacity (mAh)
3.5
3.0
3.0
180 days
90 days Initial
1.0
2.0
Charge: max. 0.1mA/3.1V, 96 hours, RT (CC/CV)
Discharge: 15µA/c.o.v. = 2.0V, respective temperature (CC)
30 days
2.0
1.5
0.0
3.5
Overdischarge: 18kΩ discharge/respective period
[Capacity measurement conditions]
Charge: max. 0.1mA/3.1V, 96 hours (CC/CV)
Discharge: 15µA/c.o.v. = 2.0V (CC)
2.5
50µA 15µA
Capacity (mAh)
Voltage (V)
3.5
100µA
Storage conditions: Each period at 60°C, applied voltage 3.1V
[Capacity measurement conditions]
Charge: max. 0.1mA/3.1V, 96 hours (CC/CV)
Discharge: 15µA/c.o.v. = 2.0V (CC)
20days
2.5
Initial
150 days
200 days
2.0
60 days
80 days
3.0
4.0
1.5
0.0
1.0
100 days 40 days
60 days
80 days
2.0
3.0
4.0
Capacity (mAh)
Micro Battery 2017
MS Lithium Rechargeable Battery
3V Type
DIMENSIONS OF STANDARD TERMINALS OF MS LITHIUM RECHARGEABLE BATTERIES
12.8
0.5±0.2
0
-1.0
0.5±0.2
0.5±0.2
1.7±0.5
(Sn plated portion)
MS614SE
φ 9.5max.
φ 6.8max.
1.8±0.5
(Sn plated portion)
(3.3)
2.7max.
2.8max.
0.15±0.02
1.8max.
1.8±0.5
(Sn plated portion)
2.5±0.3
2.1±0.5
0.15±0.02
0.5±0.1
1±0.3
2±0.3
0.5±0.1
φ 6.8max.
0.1±0.02
+0.3
2.5 -0.5
2±0.3
MS920SE / MS920T FL27E
2.1±0.2
2.1±0.4
2.1max.
0.5±0.1
1.6±0.5
(Sn plated portion)
2±0.3
MS621FE / MS621T FL11E
2.2±0.3
φ 5.8max.
1.6±0.5
(Sn plated portion)
0.1±0.02
1.6max.
0.1±0.02
1.75±0.1
0.5±0.2
1±0.3
2±0.3
MS614SE FL28E
2.2±0.5
1±0.3
0.5±0.1
2±0.3
0.5±0.1
1.65max.
1.6±0.5
(Sn plated portion)
1.75±0.1
φ 4.8max.
φ 4.8max.
2.2±0.5
MS518SE FL35E
0.5±0.1
2±0.3
1±0.3
0.5±0.1
0.5±0.1
0.1±0.02
1.75±0.1
1±0.3
MS412FE FL26E
MS414GE FL26E
1.8±0.5
(Sn plated portion)
1.7±0.5
(Sn plated portion)
MS621FE
+0.10
-0.05
2.05
φ 6.8max.
+0.07
-0.10
1.4
φ 6.8max.
MS Lithium Rechargeable batteries are also
available as bare cell (without terminals).
- Units: mm
- The hatched parts are tin plated (Sn: 100%).
Micro Battery 2017
9
MS Lithium Rechargeable Battery MS-T series
3V Type
MS920T / MS621T
FEATURES
• RoHS Compliant
• Approved by UL (Underwriters Laboratories Inc.)
UL File No. MH15628
APPLICATIONS
Backup power for Real Time Clock, or memory
＜Application＞
Automotive equipment, Security cameras, electronic
power, gas and water meters, electronic devices where
PCB temperature increases.
“MS621T” and “MS920T” have improved both higher and
lower temperature characteristics while leaving features of
the conventional MS rechargeable batteries. They offers
wider temperature range from -40℃ to 85℃.
SPECIFICATIONS
Nominal
Voltage
(V)
Type
Internal
Impedance
(Ω)*2
Nominal
Capacity
(mAh)*1
Operating Temperature
Range
Size (mm)
Diameter
Height
Weight
(g)
MS621T
3
3.0
80
−40℃ to +85℃
6.8
2.1
0.23
MS920T
3
6.5
60
−40℃ to +85℃
9.5
2.0
0.45
* Please confirm the operating conditions, etc. with your contact at SII. We would like to provide the detail characteristics
of MS920T and MS621T.
*1. Nominal capacity: Typical value of discharge capacity between 3.1V and 2.0V
*2. A constant voltage charge is recommended, but due to a limit in charge current, it is necessary to insert a resistor to regulate the
charge current.
Please see Page 19 for resister value. Contact us for further details.
If a constant current charge is required, contact us for more information.
MS Lithium Rechargeable Batteries are not reflowable. Please mount them on PCB by hand soldering.
CHARACTERISTICS
• Charge Voltage Characteristics
MS621T
MS920T
9
3
2
Charge: max. 100μA/respective voltage/
96 hours/RT(CC/CV)
Discharge: 15μA/c.o.v.=2.0V/RT (CC)
1
0
2.7
2.8
2.9
3.0
3.1
Charge Voltage (V)
10
Capacity (mAh)
Capacity (mAh)
4
3.2
3.3
3.4
8
7
6
5
4
3
2
1
0
2.7
Charge: max. 200μA/respective voltage/
72 hours/RT(CC/CV)
Discharge: 25μA/c.o.v.=2.0V/RT (CC)
2.8
2.9
3.0
3.1
3.2
3.3
3.4
Charge Voltage (V)
Micro Battery 2017
MS Lithium Rechargeable Battery MS-T series
3V Type
CHARACTERISTICS
• Discharge characteristics (-40℃ capacity)
MS621T Discharge Characteristics
3.2
MS621T maintains about 1.2mAh at -40℃.
Voltage (V)
3.0
2.8
2.6
25℃
2.4
2.2
2.0
* Charge Discharge condition
Charge: 3.1V, 96 hours, max. 100μA, RT
Discharge: 15μA, c.o.v.=2.0V, RT
−40℃
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Capacity (mAh)
MS920T Discharge Characteristics
3.6
MS920T maintains about 3.5mAh at -40℃.
3.4
Voltage (V)
3.2
3.0
2.8
2.6
25℃
2.4
2.2
2.0
* Charge Discharge condition
Charge: 3.1V, 72 hours, max. 200 μA, RT
Discharge: 25 μA, c.o.v.=2.0V, RT
−40℃
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
Capacity (mAh)
• High temperature characteristics (85℃ storage)
Storage period - Capacity retention ratio
Capacity retention ratio (%)
120
MS-T series's capacity retention ratio after High
temperature storage were greatly improved.
100
* 85℃ use of Conventional MS series is not guaranteed.
80
MS920T
60
MS920SE
* Charge Discharge condition
MS920T
Charge: 3.1V, 72 hours, max. 200 μA, RT
Discharge: 25 μA, c.o.v.=2.0V, RT
MS621T
Charge: 3.1V, 96 hours, max. 100 μA, RT
Discharge: 15 μA, c.o.v.=2.0V, RT
MS621T
40
MS621FE
20
0
0
480
960
1440
1920
2400
2880
3360
3840
Storage period (hours)
*c.o.v.…cut off voltage
Micro Battery 2017
11
TS Lithium Rechargeable Battery
1.5V Type
TS621E / TS920E
FEATURES
• Low-voltage rechargeable
• High capacity
• Long cycle life: at least 1000 cycles (20% D.O.D.)
• RoHS Compliant
• Approved by UL (Underwriters Laboratories Inc.)
UL File No. MH15628 (TS621E only)
APPLICATIONS
TS lithium rechargeable batteries are high capacity 1.5V
type non-reflowable rechargeable batteries that provide
sufficient discharge capacity with a charge voltage of less
than 2.0V.
Solar Watch (as main battery)
Small mobile equipment (backup power supply for Real
Time Clock)
＜Application＞
Security Camera, Digital Camera, Action Camera, GPS
equipments, Event Data Recorder, Handy Terminal, PC,
Smart phone.
SPECIFICATIONS
Standard
Nominal Capacity Internal
(Voltage Range V) Impedance*1 Discharge Current
(mA)
(mAh)
(Ω)
Type
Nominal
Voltage
(V)
Charge Voltage*3
(V)
TS621E
1.5
1.5 to 3.0
1.3 (1.5 to 1.0)
2.5 (2.3 to 1.0)
50
0.025
TS920E
1.5
1.5 to 3.0
5.5 (2.3 to 1.0)
20
0.05
Cycle Life*2
(Time)
Diameter Height Weight
(mm) (mm)
(g)
*4
1000 (20% D.O.D.)
100 (100% D.O.D.)
1000 (20% D.O.D.)
50 (100% D.O.D.)
6.8
2.1
0.23
9.5
2.0
0.46
*1. Value measured using an AC (Alternating Current) method in the fully charged state.
*2. Counts of charge and discharge repetition that maintains about 50% of the minimum guaranteed capacity
*3. A constant voltage charge is recommended, but due to a limit in the charge current, it is necessary to insert a resistor to regulate the
charge current.
Please contact us for further details.
If a constant current charge is required, please contact us for more information.
*4. D.O.D. : Depth of Discharge
TS Lithium Rechargeable Batteries are not reflowable. Please mount them on PCB by hand soldering.
CHARACTERISTICS
• Charge/discharge characteristics
2.5
2.0
2.0
Voltage (V)
TS920E
2.5
Voltage (V)
TS621E
1.5
1.0
0.5
0.0
0.0
Charge: max. 200μA/2.3V/48 hours (CC/CV)
Discharge: 25μA/c.o.v.= 1.0V (CC)
0.5
1.0
1.5
2.0
Capacity (mAh)
1.5
1.0
0.5
2.5
3.0
0.0
0
Charge: max. 200μA/2.3V/72 hours (CC/CV)
Discharge: 50μA/c.o.v.=1.0V (CC)
1
2
3
4
5
6
Capacity (mAh)
* c.o.v. : Cut off Voltage
12
Micro Battery 2017
TS Lithium Rechargeable Battery
1.5V Type
CHARACTERISTICS
• Charge
Voltage Characteristics
TS920E
3.0
7
2.5
6
2.0
Capacity (mAh)
Capacity (mAh)
TS621E
1.5
1.0
Charge: max. 200μA/respective voltage/
48 hours (CC/CV)
Discharge: 25μA/c.o.v.= 1.0V (CC)
0.5
0.0
1.0
1.5
2.0
2.5
5
4
3
2
Charge: max. 200μA/respective voltage/
72 hours (CC/CV)
Discharge: 50μA/c.o.v.= 1.0V (CC)
1
0
1.0
3.0
1.5
Charge Voltage (V)
2.0
2.5
3.0
Charge Voltage (V)
TS920E
High Temperature Storage Characteristics (60ºC)
Float-Charge Characteristics (60ºC)
100
100
Capacity retention ratio (%)
120
Capacity retention ratio (%)
120
80
60
40
Storage Condition: 60°C
[Capacity measurement conditions]
Charge: max. 200μA/2.3V/72 hours
(CC/CV)
Discharge: 50μA/c.o.v.= 1.0V (CC)
20
0
0
20
40
60
80
100
80
60
40
Storage Condition: 60°C/2.3V applied
[Capacity measurement conditions]
Charge: max. 200μA/2.3V/72 hours
(CC/CV)
Discharge: 50μA/c.o.v.= 1.0V (CC)
20
0
120
0
20
Storage Period (days)
40
60
80
100
120
Float Charge Period (days)
STANDARD TERMINALS
TS621E FL11E
TS920E FL27E
0
-1.0
0.5±0.2
0.5±0.2
0.5±0.2
1±0.3
2±0.3
0.5±0.2
2±0.3
12.8
1.7±0.5
(Sn plated portion)
2.7max.
2.8max.
0.15±0.02
1.8±0.5
(Sn plated portion)
(3.3)
1.8±0.5
φ 9.5max.
φ6.8max.
2.5±0.3
0.15±0.02
2.1±0.5
2.1±0.2
(Sn plated portion)
1.7±0.5
(Sn plated portion)
- Units: mm
- The hatched parts are tin plated (Sn: 100%).
Micro Battery 2017
13
ML Lithium Rechargeable Battery
Reflowable
ML414H
FEATURES
• Reflowable:
Superior heat resistance (260°C peak) allows reflow
soldering by Pr-free solder
• Large Capacity: 1.0mAh (typical)
(3.1V charge - 2.0V Cut-off)
• Operation over a wide temperature range:
Operating temperature range: −20°C to +60°C
Consult us for using the battery at a temperature beyond
the above temperature range.
• RoHS Compliant
• Approved by UL (Underwriters Laboratories Inc.)
UL File No. MH15628
ML414H is environment-friendly rechargeable battery that
can be reflowed with lead-free solder.
SPECIFICATIONS
Type
Nominal
Voltage
(V)
Charge Voltage*3
(V)
ML414H
3
2.7 to 3.1
APPLICATIONS
Backup power for Real Time Clock, or memory
Security Camera, Digital Camera, Action Camera, GPS
equipments, Event Data Recorder, Handy Terminal, PC,
Smart phone.
Nominal Capacity Internal
Standard
(Voltage Range V) Impedance*1 Discharge Current
(mAh)
(Ω)
(mA)
1.0
(3.1 to 2.0)
600
Cycle Life*2
(Time)
Diameter Height Weight
(mm) (mm)
(g)
*4
0.005
300 (100% D.O.D.)
4.8
1.4
0.07
*1. Value measured using an AC (Alternating Current) method in the fully charged state.
*2. Counts of charge and discharge repetition that maintains about 50% of the minimum guaranteed capacity
*3. A constant voltage charge is recommended, but due to a limit in the charge current, it is necessary to insert a resistor to regulate the
charge current.
Please contact us for further details.
If a constant current charge is required, please contact us for more information.
*4. D.O.D. : Depth of Discharge
Max. charging voltage of ML414H is 3.1V.
STANDARD TERMINALS
CHARACTERISTICS
ML414H IV01E
3.5
45°
4.1
1.7
φ4.8max.
3.0
Recommended board layout
(Tolerance : ±0.05)
0.4
0.6
0.8
Capacity (mAh)
* c.o.v. : Cut off Voltage
1.0
1.2
1.4
1.24
2.4±0.2
1.24
0.2
0.8±0.5
(Sn plated portion)
＋0.1
0.2 0
0.1±0.02
2.4±0.2
2.4±0.2
Charge: max. 30μA/3.1V/72 hours (CC/CV)
Discharge: 5μA/c.o.v.=2.0V (CC)
1±0.1
2.4±0.2
1.5
0.0
3.5±0.1
1±0.5
2.0
1.67±0.1
2.5
(Sn plated portion)
Voltage (V)
2.4
2.7
6
2.
2.7
2.4
5.4
• Charge/discharge characteristics
- Units: mm
- The hatched parts are tin plated (Sn: 100%).
14
Micro Battery 2017
CPX Capacitor
CPX3225A
Chip-type Electric Double Layer Capacitor
(EDLC), CPX series offers low internal
impedance and very small leak current.
CPX Capacitors allow discharge current up
to several tens of mAs, and super rapid
charging by small electromotive force.
FEATURES
1. Large discharge current and super rapid charging achieved by low internal impedance
2. Small leak current
CPX capacitor allows sufficient charging with several micro watts of energy harvesting power source.
3. Long life span, high reliability
Superior air-tight ceramic package reduces storage deterioration in high temperature / high humidity
environments, assuring long term reliability.
4. Reflowable, small and thin
The chip-type design makes it possible to reflow.
SPECIFICATIONS
Par number
Maximum Use
Voltage
(V)
Capacitance
(mF)
Internal Impedance (ESR)
(Ω)
Size (LxWxH)
(mm)
Operating
Temperature Range
Weight
(g)
CPX3225A752D
2.6
7.5
25
3.2×2.5×0.9
-30℃ to +70℃
0.024
APPLICATIONS
•
•
•
•
Power backup of instantaneous battery detachment
Power assist for main battery
Electric storage device for energy harvesting
Peak load leveling of primary battery
Suggested Applications
•
•
•
•
Handy terminals, Payment terminals
Wireless sensor network devices
NFC-enabled mobile devices
Battery powered medical devices etc.
Micro Battery 2017
15
CPH Capacitor
Reflowable
CPH3225A
FEATURES
CPH3225A is thinnest and smallest chip-type electric double
layer capacitor.
The unique ceramic packaging with superior air-tightness is
used. As the result, it offers leakage resistance and humidity
resistance. Also, by optimizing its materials, a 1 minute rapid
charge stores approximately 85% of full capacity.
Its heat-resistant design allows for Pb-free reflowable SMT
board attachment.
• Small and thin size
• Excellent leakage resistance and humidity resistance
• Reflowable:
Superior heat resistance (260°C peak) allows reflow
soldering by Pr-free solder
• Long cycle Life:
At least 10,000 times of charge/discharge
• Simple Charging circuit (constant voltage charging)
• Wide operating temperature range:
Operating temperature range: −20°C to +60°C
For use the battery at a temperature out of the above
temperature range, please consult us.
• RoHS Compliant
APPLICATIONS
Backup Power for various devices.
Super small size power supply.
Smartphone, Tablet, Cellphone, Personal computer, IC
card, Game machine, Handy terminal, Video camera,
various kinds of small appliance, etc.
SPECIFICATIONS
Type
Maximum Use
Voltage (V)
Nominal Capacity
(Voltage Range)
Capacitance
Internal Impedance*
(Ω)
Size(L × W × H)
(mm)
Weight
(g)
3.3
4.6µAh (3.3V-1.8V)
0.011F
160
3.2 × 2.5 × 0.9
0.025
CPH3225A
*. Value measured using AC (Alternating Current) method at the discharged state.
• Prohibition ripple charging
A ripple (high frequency fluctuation of
voltage) in the charge voltage extremely
lowers the capacitor performance.
Be sure to charge capacitors with a
stable voltage.
• Charge voltage
The age deterioration of the capacitor
depends on the charge voltage.
The age deterioration is accelerated as
charge voltage goes higher.
• Usage environment
Aging degradation of the capacitor varies
depending on the usage environment
(temperature and humidity).
Contact us for further details.
CHARACTERISTICS
Charge/discharge characteristics
3.5
3.0
Voltage (V)
2.5
2.0
1.5
1.0
Charge: max. 1 mA/3.3V/2 hours
(CC/CV)
Discharge: 5µA/c.o.v.= 0V (CC)
0.5
0.0
0
2
* c.o.v. : Cut off Voltage
16
4
6
Capacity (µAh)
8
10
Micro Battery 2017
CPH Capacitor
Reflowable
CHARACTERISTICS
Charge Time Characteristics
100
80
60
40
Charge: max. 10mA/3.3V/
respective charge time (CC/CV)
Discharge: 5µA/c.o.v.= 2.0V (CC)
20
0
0
1
10
Float-Charge Characteristics (60ºC, 90%RH)
120
Capacity retention ratio (%)
Capacity retention ratio (%)
120
100
100
80
60
40
20
0
1000
Storage condition: 60°C/90%RH/3.3V applied
[Capacity measurement conditions]
Charge: max. 1mA/3.3V/2 hours (CC/CV)
Discharge: 5µA/c.o.v.= 2.0V (CC)
Charge Time (minutes)
0
5
10
15
20
Float Charge Period (days)
REFLOW SOLDERING CONDITIONS
Reflow Profile Example
The peak temperature is within five seconds.
Peak temperature (°C)
Temperature (°C)
250
200
150
Time above
200°C
100
50
0
Recommended Reflow Conditions
270
0
50
100
150
200
250
260
250
240
230
220
300
0
10
20
30
40
50
60
70
Time above 200°C (seconds)
Time (seconds)
The times of repeated reflow soldering must be two times or less.
The Temperature must be measured at top of the cell.
Max. 260°C (within 5 seconds)
DIMENSIONS
CPH3225A
3.6
1.4
2.5±0.1
1.4
0.2
1.4
1.4
Recommended board layout
(Tolerance : ±0.05)
0.9±0.1
3.2±0.1
1.0±0.15
(0.15)
1.0±0.1
1.0±0.1
(0.15)
1.0±0.15
- Units: mm
Micro Battery 2017
17
Mercury Free Silver Oxide Battery :
FEATURES
• Able to discharge mA level of pulse current
• Small diameter (11.6mm and less)
- Height ranges from 1.25mm to 5.4mm.
- Diameter ranges from 4.8mm to 11.6mm.
• Large energy density
APPLICATIONS
SEIZAIKEN, Mercury Free Silver Oxide Batteries by
Seiko Instruments Inc., has grown with the history
of quartz watches. Silver Oxide Batteries have high
density of energy per volume and are able to supply
stable voltage for a long time. SEIZAIKEN Batteries
are suitable to power BLE(Bluetooth Low Energy),
wearable devices, and information devices.
Devices that require high discharge pulsing
Stylus pen for tablets, disposable devices, thermometers,
....
SPECIFICATIONS
Type
Nominal
Voltage
(V)
Nominal Capacity
(mAh)
Discharge Level
SR ** SW
1.55
5.5 to 160
SR ** W
1.55
28 to 160
Dimensions (mm)
Diameter
Height
Weight
(g)
Low current
4.8 to 11.6
1.25 to 5.40
0.11 to 2.20
High current
6.8 to 11.6
2.05 to 5.40
0.39 to 2.20
CHARACTERISTICS
• Comparisons at 10mA for1 sec Pulse Discharge and c.o.v.2.0V
SR920W (2 pcs in series)
Test result of pulse discharge SR920W 25°C
3.00
3.00
2.50
2.50
2.00
1.50
14,190 times of Pulse
1.00
0.50
0.00
Test result of pulse discharge CR1025 25°C
3.50
Voltage/V
Voltage/V
3.50
CR1025
2.00
1.50
1.00
2,031 times of Pulse
0.50
0
5000
10000
15000
Pulse Number
0.00
0
5000
10000
15000
Pulse Number
• Discharge characteristics
SR920W Discharge characteristics
1.8
1.7
Voltage (V)
1.6
1.5
1.4
1.3
1.2
1.1
1
18
Discharge : Load:15kΩ / 23℃
0
10
20
30
Capacity (mAh)
40
50
Micro Battery 2017
Mercury Free Silver Oxide Battery :
is our trademark for silver oxide battery globally acknowledged in the quartz watch market.
• Low Drain Battery
Model
Characteristics (RT)
Dimensions
Standard
Discharge
Current
(μA)
Diameter
(mm)
Height
(mm)
10
4.8
1.65
20
4.8
2.15
5.5
5
5.8
1.25
12.5
20
5.8
1.65
13
16
20
30
5.8
1.55
22
40
1.55
16
JIS code
IEC code
Nominal
Voltage
(V)
Standard*1
Capacity
(mAh)
SR416SW
337
1.55
7.5
SR421SW
348
1.55
12
SR512SW
335
1.55
SR516SW
317
1.55
SR521SW
379
1.55
SR527SW
319
SR616SW
321
C.C.V.*2
Weight
(g)
at 24℃
(V)
at −10℃
(V)
0.11
1.35
1.10
0.14
1.35
1.10
0.15
1.45
1.10
0.18
1.45
1.10
2.15
0.23
1.45
1.10
5.8
2.70
0.29
1.45
1.10
20
6.8
1.65
0.25
1.45
1.10
30
40
6.8
2.15
0.32
1.45
1.20
SR621SW
364
1.55
21
23
SR626SW
377
1.55
24
28
30
30
40
40
6.8
2.60
0.39
1.45
1.20
SR712SW
346
1.55
10
10
7.9
1.25
0.26
1.45
1.20
SR714SW
341
1.55
15
20
7.9
1.45
0.29
1.45
1.20
SR716SW
315
1.55
21
30
7.9
1.65
0.33
1.45
1.20
40
40
7.9
2.10
0.42
1.45
1.20
SR721SW
362
1.55
23
28
SR726SW
397
1.55
34
40
7.9
2.60
0.52
1.45
1.20
SR731SW
329
1.55
36
50
7.9
3.10
0.56
1.45
1.20
SR41SW
384
1.55
45
50
7.9
3.60
0.67
1.45
1.20
SR912SW
–
1.55
15
20
9.5
1.25
0.40
1.45
1.20
SR916SW
373
1.55
27
50
9.5
1.65
0.51
1.45
1.20
SR920SW
371
1.55
35
46
50
60
9.5
2.05
0.60
1.45
1.20
SR927SW
395
1.55
53
60
80
100
9.5
2.70
0.75
1.45
1.20
SR936SW
394
1.55
85
140
9.5
3.60
1.10
1.45
1.20
SR1120SW
381
1.55
53
80
11.6
2.05
0.93
1.45
1.20
SR1130SW
390
1.55
80
100
11.6
3.05
1.29
1.45
1.20
SR43SW
301
1.55
120
150
11.6
4.20
1.75
1.45
1.20
SR44SW
303
1.55
160
180
11.6
5.40
2.20
1.45
1.20
*1 The standard capacity is calculated by the measurement result of discharging time with the standard discharge current to the voltage 1.2V.
*2 C.C.V.: Closed Circuit Voltage / Low Drain 2kΩ 7.8msec Pulse
• HIGH Drain Battery
Model
Characteristics (RT)
Dimensions
Standard
Discharge
Current
(μA)
Diameter
(mm)
Height
(mm)
50
6.8
2.60
26
50
7.9
34
50
7.9
JIS code
IEC code
Nominal
Voltage
(V)
Standard*1
Capacity
(mAh)
SR626W
376
1.55
28
SR721W
361
1.55
SR726W
396
1.55
C.C.V.*2
Weight
(g)
at 24℃
(V)
at −10℃
(V)
0.39
1.35
0.95
2.10
0.41
1.35
1.05
2.60
0.52
1.35
1.05
SR41W
392
1.55
45
80
7.9
3.60
0.67
1.35
1.05
SR920W
370
1.55
42
80
9.5
2.05
0.60
1.40
1.00
SR927W
399
1.55
53
60
90
110
9.5
2.70
0.75
1.40
1.05
SR1120W
391
1.55
53
90
11.6
2.05
0.93
1.40
1.20
SR1130W
389
1.55
80
130
11.6
3.05
1.29
1.40
1.20
SR43W
386
1.55
120
220
11.6
4.20
1.75
1.40
1.20
SR44W
357
1.55
160
250
11.6
5.40
2.20
1.40
1.20
*1 The standard capacity is calculated by the measurement result of discharging time with the standard discharge current to the voltage 1.2V.
*2 C.C.V.: Closed Circuit Voltage / High Drain 200Ω 5sec DC
Micro Battery 2017
19
Charging Circuit
CHECK SHEET
If you are considering the purchase of one or more of our microbatteries or capacitors, please
complete this check sheet and send it to us. We will let you know which products will be
optimum for you to use.
Fax Sheet
Micro-Energy Division Sales Sec. +81-43-211-8034 Battery Sales Person
1. Your company name
2. Which application do you use?
3. Your expected backup period
hour / day / month
4. Your requested delivery date
mm / yy
5. Operation voltage of the device for backup
6. Consumption current at backup time
V to
V
mA •
mA
7. Setting value of charging voltage
V
8. Presence of reverse current protection diode
9. Vf characteristics of the reverse current protection diode (at 10μA)
10. Resistance value of charging protection resistance
Yes
• No
V
W
11. Limit of charging time
12. Required cycle life
times
13. Other requests
14. Expected life (e.g., xx years or backup for xx hours)
15. Ambient temperature and humidity
Your contact information
Name
Section
Phone
Fax
E-mail
20
Micro Battery 2017
Environmental Activities
Environmental Activities at Micro-Energy Division
Environment & Quality Policy
Seiko Instruments Inc., Micro-Energy Division is located in Ayashi, a city with beautiful nature,
in Miyagi Prefecture. Our aim is to provide customer satisfaction and harmony with the
environment through all our products, from Micro battery to other electronic products, and sales
activities.
1. We adhere firmly to laws, regulations and customers’ specified requirements.
2. We aim to prevent pollution, to reduce CO2, and to conserve biodiversity.
3. We set goals, take actions, conduct regular reviews, and improve the system and performance
continuously.
4. We contribute to the society by supporting green procurement, developing green products, and
promoting green life activity.
5. We adhere to regulations and recommodations regarding Chemical substance content in our products
and will promote reduction and replacement.
6. We vigorously educate ourselves and try to engage voluntarily in green life activity.
Based on the above policy, the following six environmental approaches are now being implemented throughout
Micro-Energy Division.
1. Enrich the line up of Eco-Products
• We introduced the SII Green Product Label System which is equivalent to the ISO 14021 Type II environmental label.
At the end of FY2006, 100% of our products are certified as SII Green Products. In addition, 42 products are certified
as SII "High Grade" Green Products.
2. Reduction of Greenhouse Gas
• We practice various CO2 reduction measures like using Eco-machinery. Since 1997, we have successfully reduced a
total of 60,700 tons of CO2. We believe our efforts contribute to the prevention of global warming.
70,000
ton CO2
Reduction amount of CO2
(accumulated since 1997)
60,000
50,000
40,000
30,000
20,000
10,000
0
97
98
99
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
Result
15
16
target
3. 3R Promotion Activity
• We have promoted the "reduce and reuse" activities and also promoted recycling at the end of the production
process. With these activities, we achieved "Zero-emission" in 2004. We have reduced the non-recyclable wastes to
less than 1 ton - less than 1% of our 1997 results.
ton CO2
80
Final amount of waste
70
60
50
40
30
20
10
0
97
98
99
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
Result
15
16
target
4. Biodiversity Conservation
• We endeavor to deepen our understanding on the relevancy between biodiversity and our business activities, and to
contribute to the conservation of biodiversity by participating local community activities.
5. Green Purchasing
• We adhere to a green purchasing campaign through the purchase of ingredients, manufacturing materials, and other
necessary products, whenever appropriate.
6. Green Life
• With the participation of all of Micro-Energy Division members, we deploy a clean-up and beautification campaign in all
areas surrounding our factory once a year. In addition, we participate in the clean up activity at Hirose River once a year.
7. Conflict Minerals
• Recognizing the international importance of conflict minerals issue, we prohibit the use of such minerals.
Micro Battery 2017
21
Precautions for Your Safety
SII Lithium rechargeable batteries (MS, ML, TS) contain flammable organic solvents.
For your safety, please follow following prohibitions.
WARNING!
1. Do not charge by high current or high voltage.
Doing so may generate gas inside the battery, resulting swelling,
fire, heat generation or bursting.
2. Do not heat, disassemble nor dispose of in fire
Doing so damages the insulation materials and may cause fire,
heat generation, leakage or bursting.
3. Do not solder directly to the battery
If soldering is performed directly to the battery, the battery is
heated up, consequently causing leakage, explosion or fire due
to overheating from internal short-circuit.
4. Do not short.
If the (+) and (-) come into contact with metal materials,
short-circuit occurs. As a result, fire, heat generation, leakage or
bursting may occur.
5. Keep batteries out of children’s reach.
It is dangerous that children swallow the battery.
When you design mechanical hardware around the battery, please
fix the battery firmly in order to prevent children from removing it.
When you store the batteries, please keep the batteries out of
children’s reach.
If a battery is swallowed, consult a physician immediately.
7. Do not weld terminals to the battery
The heat by welding may cause fire, heat generation, leakage or
bursting.
We weld standard terminals under strictly controlled conditions.
If you need to weld terminals to the battery, please consult us in
advance.
8. Do not discharge by force
If the battery is discharged by direct connection to an external
power supply etc., voltage of the battery will decline lower than
0 volts (electrical reversal) and will cause the battery case to
expand, overheat, leak, explode or burn.
9. In case of leakage or a strange smell, keep away from fire to
prevent ignition of any leaked electrolyte.
10. In case of disposal, insulate between (+) and (-) of
battery by an insulating material.
Jumbling batteries or with other metal materials cause short-circuit.
As a result, fire, heat generation, leakage or bursting may occur.
Do not jumble batteries
Short-circuiting
6. Do not reverse placement of (+) and (-)
If the (+)and(-) side of the battery is reverse inserted, it may cause a
short-circuit or over discharge of the battery on some equipment and it
may induce overheating, explosion or fire.
Example Example of insulation
Insulating tape
discharge
discharge
Contacting between batteries cause
short-circuiting such as above diagram.
CAUTION!
1. If leaked liquid gets in the eyes, wash them with clean
water and consult a physician immediately.
2. Do not use new and used batteries together. Do not
use different types of batteries together.
5. Do not apply strong pressure to the batteries nor handle
roughly.
3. If you connect two or more batteries in series or parallel,
please consult us in advance.
7. Keep batteries away from direct sunlight, high
temperature and humidity.
4. Do not use nor leave the batteries in direct sunlight nor
in high-temperature areas.
8. Do not make batteries airtight by sealing it with adhesive
agent or coating agent.
It may cause fire, heat generation, leakage or bursting.
It may cause bursting or fire due to unbalanced load or voltage.
It may cause fire, heat generation, leakage or bursting.
It may cause fire, heat generation, leakage or bursting.
6. Avoid contact with water.
It may cause heat generation.
It may cause heat generation or performance deterioration.
It may cause short-circuit because of generated and accumulated
electrolyte gas.
For prevention of performance deterioration of battery
1. Pay attention to mat or sheet for ESD
Battery with tabs or battery on PCB may short circuit on the mat for ESD.
As a result, the voltage of the cell is reduced.
2. Pay attention to soldering by tips
Do not touch the battery by soldering iron tips directly.
Keep any high temperature process away from battery.
3. Pay attention to material of jig for pick and place
Use non-conductive material of jig for pick and place of batteries, for
short-circuit protect. If short-circuit of battery occurs, the voltage of battery
drops down quickly but raises gradually.
4. Pay attention to washing and drying
Some detergent or high temperature drying may cause deteriorate of battery.
If you need to wash batteries, consult us.
International Transportation and Disposal
• International Air / Marine / Ground Transportation
Regarding the transport of Lithium battery, organizations like IATA, ICAO,
IMO, DOT have determined transport regulations, based on the United
Nations Regulations.
Regarding air transport, SII Lithium rechargeable batteries can be
transported being not subject to the provisions of dangerous goods, if the
transportations meet the following requirements.
Please contact us for more details.
Regarding marine or ground transport, please contact us for more details, too.
(a) Batteries are separated each other, and are
packed in strong packaging so as to prevent short-circuit.
(b) Lithium battery handling label (IATA prescribed),
indicating that the packages contain Lithium batteries, that the packages
must be handled with care, and that special procedures should be
followed in the event that the package is damaged, and a telephone number
for additional information, must be put on each package.
(c) “CARGO AIRCRAFT ONLY” Label must be put on each
package.
(d) Each shipment must be accompanied
with a document indicating that the packages contain Lithium batteries,
that the packages must be handled with care, that it must not be
22
transported by passenger flight, and that special procedures should be
followed in the event that the package is damaged, and a telephone number
for additional information.
(e) Each package is capable of withstanding a 1.2m
drop test in any orientation without damage to batteries contained.
(f) Net weight of one package may not exceed 2.5 kg.
(g) The shipment must be “one carton
per one shipment” to be shipped as “Non-dangerous goods”.
“One shipment” means one airway bill = one invoice.
[Transport as dangerous goods]
When you transport SII’s Lithium rechargeable batteries by “more than
one carton per one shipment”, you will have to arrange it as “Dangerous
goods”.
It requires special procedures, like “Class 9 dangerous goods Label” on
carton, and “dangerous goods declaration”.
• Disposal
Recently environmental protection regulations have increased and battery
disposals are regulated globally.
Such regulations are different in each country, state, and municipality.
Please consult your local authorities regarding the specific regulations in
your area.
Micro Battery 2017
Precautions for Your Safety
Micro-Energy Division capacitors (CPH, CPX) contain flammable organic solvents. For your safety,
please follow the following precautions.
WARNING!
When you store the capacitors, please keep the capacitors out of
children’s reach. If a capacitor is swallowed, consult a physician
immediately.
• Do not charge by higher current or higher voltage than
specified.
Doing so may generate gas inside the capacitor, resulting in
swelling, fire, heat generation or bursting.
• Do not heat, disassemble nor dispose of in fire
Doing so damages the insulation materials and may cause fire,
heat generation, leakage or bursting.
• Do not reverse placement of (+) and (-)
SII capacitors have polarity. If the (+) and (-) side of the capacitor
is reverse inserted, it may cause short-circuit or over discharge of
the capacitor on some equipment and it may induce overheating,
explosion or fire.
• Do not discharge by force
If the capacitor is discharged by direct connection to an external
power supply etc., voltage of the capacitor will decline lower than
0 volts (electrical reversal) and will cause the capacitor case to
expand, overheat, leak, explode or burn.
• Keep capacitors out of children’s reach.
It is dangerous that children swallow the capacitor.
When you design mechanical hardware around the capacitor,
please fix the capacitor firmly in order to prevent children from
removing it.
• In case of leakage or a strange smell, keep away from
fire to prevent ignition of any leaked electrolyte.
CAUTION!
• Do not use new and used capacitors together. Do not
use different types of capacitors together.
• If leaked liquid gets in the eyes, wash them with clean
water and consult a physician immediately.
• Do not use nor leave the capacitors in direct sunlight
nor in high-temperature areas.
It may cause fire, heat generation, leakage or bursting.
• If you connect two or more capacitors in series or
parallel, please consult us in advance.
It may cause fire, heat generation, leakage or bursting.
It may cause bursting or fire due to unbalanced load or voltage.
• Do not make the capacitor airtight by sealing it with
adhesive agent or coating agent.
• Keep capacitors away from direct sunlight, high
temperature and humidity.
It may cause short-circuit because of generated and accumulated
electrolyte gas.
It may cause heat generation or performance deterioration.
For using SII Silver Oxide batteries, please follow the following precautions.
WARNING!
fix the battery firmly in order to prevent children from removing it.
When you store the batteries, please keep the batteries out of
children’s reach.
If a battery is swallowed, consult a physician immediately.
• Do not heat, disassemble nor dispose of in fire
Doing so damages the insulation materials and may cause fire, heat
generation, leakage or bursting.
• Do not short.
If the (+) and (-) come into contact with metal materials, shortcircuit
occurs. As a result, fire, heat generation, leakage or bursting may
occur.
• If leaked liquid, alkaline, get in the eyes, do not rub them,
wash them with clean water and consult a physician
immediately.
• If leaked liquid, alkaline, stick to clothing, for protecting
from irritation, wash them with clean water immediately.
• Keep batteries out of children’s reach.
It is dangerous that children swallow the battery.
When you design mechanical hardware around the battery, please
CAUTION!
• Make sure to insert batteries without having (+) and (-)
come in contact with metal parts of equipment.
• Read the equipment instruction manual and precautions
carefully before using. Some usage or types of equipment
do not suit the specifications or performance of these
batteries.
• Remove batteries from the equipment, if finished using.
Do not leave batteries connecting with equipment
after using.
• Do not reverse placement of (+) and (-)
• Do not solder directly to the battery
• Do not use new and used batteries together. Do not
use different types of batteries together.
• Do not charge.
• Do not use nor leave the batteries in direct sunlight
nor in high-temperature areas.
• Keep batteries away from direct sunlight, high
temperature and humidity.
• Avoid letting battery contact water.
• In case of disposal, insulate between (+) and (-) of battery
by an insulating material.
IMPORTANT
1. The information herein is subject to change without notice.
2. Neither reproduction, duplication nor unauthorized use of this catalog
in whole or part is allowed without the prior written approval of Seiko
Instruments Inc.
3. The colors of the products reproduced herein (“Products”) may be
different from the actual colors. Check colors on actual products before
using the Products.
4. Circuits and respective application methods described herein are for reference
only. Seiko Instruments Inc. shall not be liable for any damages or
losses resulting from any claim by third parties that any Products
or application methods described herein infringe any right intellectual
property right. All intellectual property rights with respect to the Products
belong exclusively to Seiko Instruments Inc.
Seiko Instruments Inc. does not grant users of the Products any right
or license to the Products hereunder.
5. When Products include Strategic Products (or Services) stipulated in the
Foreign Exchange and Trade Control Law, they shall not be exported
without permission of governmental authorities.
6. The Products are designed for consumer equipment and cannot be
used as part of any device or equipment which influences the human
body or requires a significantly high reliability, such as physical exercise
equipment, medical equipment, disaster prevention equipment, gas
related equipment, vehicles, aircraft and equipment mounted on vehicles
without our prior express written consent.
All data, dimensions, characteristics and values shown in this catalogue are for reference only.
Please contact your local Seiko Instruments Representative for current detailed specifications.
Micro Battery 2017
23
Micro-Energy Division who manufactures the products described in
this catalog holds the ISO 9001 quality management system
certificate, and the ISO 14001 environmental management systems
certificate.
www.sii-me.com
Micro-Energy Division
1-8, Nakase, Mihamaku, Chiba-shi, Chiba 261-8507, Japan
Telephone:+81-43-211-1735 Facsimile:+81-43-211-8034
Asia
Seiko Instruments (H.K.) Ltd.
Seiko Instruments (Shanghai) Inc.
Seiko Instruments (H.K.) Ltd.
- Shenzhen Rep. Office
Seiko Instruments Taiwan Inc.
4-5/F, Wyler Centre 2, 200 Tai Lin Pai Rd.,
Kwai Chung, N.T., Kowloon, Hong Kong
Telephone: +852-2494-5111
Facsimile: +852-2480-5479
Email:sales@sih.com.hk
http://www.sih.com.hk
Room 2212-15, Office Tower, Shun Hing
Square Di Wang Commercial Centre,
5002 Shen Nan Dong Road, Shenzhen,
518008, China
Telephone: +86-755-8246-2680
Facsimile: +86-755-8246-5140
Room 2701-2703, 27th Floor,
Shanghai Plaza,
138 Mid Huaihai Rd.,
Shanghai 200021, China
Telephone: +86-21-6375-6611
Facsimile: +86-21-6375-6727
12F, No.101, Sec.2, Nanking E. Rd.,
Taipei 104, Taiwan, R.O.C.
Telephone: +886-2-2563-5001
Facsimile: +886-2-2563-5580
Email:public@sii.co.jp
http://www.sii.com.tw
North/Central/South America
Europe
Seiko Instruments GmbH
Siemensstrasse 9
D-63263 Neu Isenburg, Germany
Telephone: +49-6102-297-0
Facsimile: +49-6102-297-50100
Email:info@seiko-instruments.de
http://www.seiko-instruments.de
Seiko Instruments U.S.A., Inc.
21221 S. Western Ave., Suite 250,
Torrance, CA 90501, U.S.A.
Telephone: +1-310-517-7802
Facsimile: +1-310-517-7792
Email:info@seikoinstruments.com
http://www.sii-me.com
Contact us
(Specifications are subject to change without notice.)
Released in February 2017
Printed with soy ink.
Copyright©2017 Seiko Instruments Inc. All Right Reserved.
No.BAC3016EJ-01C1702
工商网监
湘ICP备2023018690号
