MS621FE-FL11E

Micro Battery Product Catalogue 2017 A few decades ago, we commercialized a highly reliable silver oxide battery to meet the requirement of quartz watch development. Since then, we have expanded our microbattery offering and technology to support the increased diversity in electronic products available today. This brochure introduces manganese silicon lithium rechargeable batteries, titanium silicon lithium rechargeable batteries, and reflowable capacitors, and silver oxide batteries. We plan to continuously develop higher performance microbatteries and widen our products lineup to keep up with our emerging technologies. Please feel free to contact us with any questions you may have. FEATURES 1. Superior leakage resistance Even a slight leakage from a battery may interfere with the connections made by the battery terminals, resulting in unstable device operation. Seiko Instruments Inc. offers micro batteries that are highly leak-resistant due to special sealing materials and processing technologies. CONTENTS Microbattery and Capacitor Lineup ................. 3 Charging Circuit .............................................. 5 MS Lithium Rechargeable Battery .................. 6 MS Lithium Rechargeable Battery .......................... 10 TS Lithium Rechargeable Battery .................. 12 ML Lithium Rechargeable Battery .................. 14 CPX Capacitor ......... 15 CPH Capacitor ............................................... 16 Mercury Free Silver Oxide Battery ................. 18 Selection Check Sheet ................................... 20 Environmental Activities ................................. 21 Precautions for Your Safety ............................ 22 2. Large capacity In order to extend the operating time of devices with limited battery space, the market demands high volumetric efficiency. We offer large-capacity microbatteries developed with proprietary technology utilizing high-purity materials. 3. Stable operating voltage Carefully compounded ingredients allow each of our micro batteries to have a stable operating voltage over both a wide temperature range and depth of discharge. 4. High reliability Our micro batteries are manufactured under an integrated system featuring strict quality control, which starts with component manufacturing, through assembly and on to rigorous out-going inspection. Microbattery and Capacitor Lineup MICROBATTERY AND CAPACITOR FEATURES MS lithium rechargeable battery : TS lithium rechargeable battery : ML lithium rechargeable battery : CPX capacitor : CPH capacitor : 3V type. Large capacity and high cycle life characteristics in a compact body with excellent overdischarge characteristics featured. MS-T series offers wider operating temperature range, -40℃ to 85℃. 1.5V type. Charge voltage range from 1.5V to 3.0V is supported while high reliability is maintained. Reflowable lithium rechargeable battery. Nominal capacity 1.0mAh. 3.1V charge (maximum). Low ESR, low leak current chip type Electric Double Layer Capacitor. Discharge by larger current is possible. Charge by very small power source with several micro watts is possible. (Energy harvesting.) Small and thin size chip type Electric Double Layer Capacitor. Excellent long term reliability, humidity resistance achieved by its superior air-tight packaging. Rechargeable battery and capacitor sizes *The rectangle and circles in the table show actual battery and capacitor sizes. MS621FE TS621E MS621T 2.1mm MS518SE Height 1.8mm 1.4mm MS414GE ML414H 1.2mm MS412FE 0.9mm MS920SE TS920E MS920T MS614SE CPH3225A CPX3225A Chip type 3.2mm × 2.5mm Φ4.8mm Φ5.8mm Φ6.8mm Φ9.5mm SIZE Diameter Applications Smartphone Digital still camera Tablet Video camera GPS·Car navigation system Watch Micro Battery 2017 3 Microbattery and Capacitor Lineup Example of a recommended application circuit: for RTC backup VCC Main power supply VR S-13R1* VDD SCL CPU SDA RTC S-35390A INT1 INT2 MS414GE 3V/2.0mAh SSP-T7-F MS614SE 3V/3.4mAh VCC Reference: 4pF Temperature sensor * Reverse Current Protection CMOS Voltage Regulator S-13R1, made by SII Semiconductor Corporation. * This circuit diagram is a reference example. See the data sheet of each product before using it. Example of RTC backup time, using MS414GE/MS614SE RTC used: CMOS real time clock IC S-35390A, made by SII Semiconductor Corporation. Clock operating voltage: 1.1 to 5.5V, current consumption: 0.25μA Crystal used: SSP-T7-FL, made by Seiko Instruments Inc. CL = 6.0pF, R1 = 65kΩ max. 3.5 Battery voltage (V) 3.0 2.5 2.0 MS414GE 1.5 1.0 MS614SE RTC operable voltage 0.5 0.0 0 5,000 Discharge Time (hours) 10,000 One year (8,760 hours) * This graph is a rough indication. The operating time varies depending on the actual service conditions. 4 Micro Battery 2017 Charging Circuit 1. Charging circuit for MS / ML / TS Lithium Rechargeable Battery Resistor to regulate the charging current Diode Vo Vf Power Source Vo MS / ML / TS Battery The charging voltage “Vo” must Not be higher than 3.3V (MS series) / 3.1V (ML414H) / 3.0V (TS series). A resistor must be inserted to regulate the charging current, because our rechargeable batteries have a limit for charging current. Please see the below table for recommended resister values. Those values are minimum for each battery type and “Vo” in the charging circuit. For example, MS614SE and Vo 3.3V, the resister value should be 620 ohm or more. • MS lithium rechargeable battery / ML lithium rechargeable battery MS414GE MS412FE MS518SE MS614SE Resistor (ohm) 2,000 1,600 1,600 1,500 1,500 1,500 Resistor (ohm) 2,000 1,600 1,600 1,500 1,500 1,500 Resistor (ohm) 1,500 1,000 820 750 750 750 Resistor (ohm) 620 430 330 300 300 300 Vo (V) 3.3 3.2 3.1 3.0 2.9 2.8 • TS lithium rechargeable battery Vo (V) 3.0 2.9 2.8 2.7 2.6 2.5 TS621E Resistor (ohm) 10,000 10,000 9,100 9,100 8,200 7,500 TS920E Resistor (ohm) 12,000 11,000 11,000 10,000 10,000 9,100 Vo (V) 2.4 2.3 2.2 2.1 2.0 1.9 TS621E Resistor (ohm) 7,500 6,800 6,200 5,600 5,100 4,700 TS920E Resistor (ohm) 9,100 8,200 7,500 7,500 6,800 6,200 MS621FE MS621T Resistor (ohm) 620 430 330 300 300 300 Vo (V) 1.8 1.7 1.6 1.5 MS920SE MS920T Resistor (ohm) 620 430 330 300 300 300 Resistor (ohm) prohibited prohibited 3,000 3,000 3,000 3,000 TS621E Resistor (ohm) 4,300 3,600 3,000 2,700 TS920E Resistor (ohm) 5,600 5,100 4,700 4,300 ML414H Please use a diode that has very low Vf (forward voltage drop), to prevent losing the actual charging voltage to battery. Discharge capacity depends on charging voltage. Lower charging voltage may cause lower discharge capacity. Please see Charge Voltage Characteristics data for respective battery series. (Page 7, Page 10, and Page 13) 2. Charging circuit for CPH capacitor Diode Vo Power Source Vo Vf CPH Capacitor You do not need to insert a resister to regulate charging current. Our CPH capacitor do not have a limit for charging current. The charging voltage "Vo" must Not be higher than 3.3V. Please use a diode that has very low Vf (forward voltage drop), to prevent losing the actual charging voltage to capacitor. This guidance is for CPH capacitors. For CPX capacitor or other capacitors, please contact us. Micro Battery 2017 5 MS Lithium Rechargeable Battery 3V Type MS414GE / MS412FE / MS518SE / MS614SE / MS621FE / MS920SE FEATURES MS (Manganese Silicon) lithium rechargeable batteries, developed by Seiko Instruments Inc., use silicon oxide as the anode and a lithium manganese composite oxide as the cathode. As a result, they offer long cycle life and highly stable overdischarge characteristics. APPLICATIONS Negative cap Gasket Negative electrode Backup power for Real Time Clock, or memory Security Camera, Digital Camera, Action Camera, GPS equipments, Event Data Recorder, Handy Terminal, PC, Smart phone. Separater Positive electrode • Large discharge capacity : For high operational voltage range of 3.3V to 2.0V. • Long cycle life : Cycle life of over 100 cycles (over 50 cycles for MS414GE) under charge/discharge conditions of 3.1V to 2.0V (D.O.D.100%). • Excellent overdischarge characteristics : Continued stable capacity characteristics even after the battery is overdischarged down to 0.0V. • Operation over a wide temperature range: Operating temperature range : −20°C to +60°C Consult us for using the battery at a temperature beyond the above temperature range. • RoHS Compliant • Approved by UL (Underwriters Laboratories Inc.) UL File No. MH15628 Positive case SPECIFICATIONS Type Charge Voltage Nominal (Standard Voltage Charge Voltage)*6 (V) (V) Nominal Capacity (mAh)*1 Internal Impedance (Ω)*2 Cycle Life (Time)*4 Size (mm) Maximum Standard Discharge 100%*5 20%*5 Discharge Current D.O.D. D.O.D. Current (Continuous) (Depth of (Depth of Diameter Height (mA) *3 (mA) Discharge) Discharge) Weight (g) MS414GE 3 2.8 to 3.3 (3.1) 2.0 100 0.010 0.05 50 500 4.8 1.4 0.08 MS412FE 3 2.8 to 3.3 (3.1) 1.0 100 0.010 0.10 100 1000 4.8 1.2 0.07 MS518SE 3 2.8 to 3.3 (3.1) 3.4 60 0.010 0.15 100 1000 5.8 1.8 0.13 MS614SE 3 2.8 to 3.3 (3.1) 3.4 80 0.015 0.25 100 1000 6.8 1.4 0.17 MS621FE 3 2.8 to 3.3 (3.1) 5.5 80 0.015 0.25 100 1000 6.8 2.1 0.23 MS920SE 3 2.8 to 3.3 (3.1) 11.0 35 0.050 0.80 100 1000 9.5 2.1 0.47 *1. *2. *3. *4. *5. *6. Nominal capacity: Typical value of discharge capacity between 3.1V and 2.0V Internal impedance is measured using an AC (Alternating Current) method at the fully charged state. Maximum discharge current indicates the value of a current for approximately 50% of the nominal capacity. Cycle Life indicates the times charge/discharge is repeated for approximately 50% of the capacity values in the specification sheet. 100% and 20% are based on nominal capacity. A constant voltage charge is recommended, but due to a limit in charge current, it is necessary to insert a resistor to regulate the charge current. Please see Page 5 for resister value. Contact us for further details. If a constant current charge is required, contact us for more information. MS Lithium Rechargeable Batteries are not reflowable. Please mount them on PCB by hand soldering. 6 Micro Battery 2017 MS Lithium Rechargeable Battery 3V Type DISCHARGE CHARACTERISTICS (CHARGE VOLTAGE DEPENDENCE) MS414GE MS412FE 3.5 3.5 Charge: max. 0.025mA/72 hours (CC/CV) Discharge: 10µA/c.o.v. = 2.0V (CC) Charge: max. 0.05mA/60 hours (CC/CV) Discharge: 10 µA/c.o.v. = 2.0V (CC) 3.0 Voltage (V) Voltage (V) 3.0 2.5 3.1V 2.0 2.0 2.8V 2.9V 3.0V 3.3V 1.5 0.0 0.5 1.0 1.5 2.5 2.0 2.8V 1.5 0.0 2.5 0.2 0.4 0.6 1.0 1.2 1.4 1.6 MS614SE MS518SE 3.5 3.5 Charge: max. 0.1mA/96 hours (CC/CV) Discharge: 15µA/c.o.v. = 2.0V (CC) Charge: max. 0.06mA/72 hours (CC/CV) Discharge: 10 µA/c.o.v. = 2.0V (CC) 3.0 Voltage (V) 3.0 Voltage (V) 3.0V 2.9V Capacity (mAh) Capacity (mAh) 2.5 2.0 1.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.1V 2.0 2.9V 3.0V 3.1V 3.3V 2.8V 3.3V 2.5 2.8V 1.5 0.0 3.5 1.0 2.9V 2.0 3.0V 3.0 4.0 Capacity (mAh) Capacity (mAh) MS621FE MS920SE 3.5 3.5 Charge: max. 0.1mA/96 hours (CC/CV) Discharge: 15µA/c.o.v. = 2.0V (CC) Charge: max. 0.2mA/96 hours (CC/CV) Discharge: 50µA/c.o.v. = 2.0V (CC) 3.0 3.0 3.1V 2.5 2.9V 2.0 1.5 0.0 3.3V 2.8V 2.0 Capacity (mAh) 3.1-3.3V 2.5 2.0 3.0V 4.0 Voltage (V) Voltage (V) 0.8 3.3V 3.1V 6.0 1.5 0.0 2.8V 2.0 4.0 6.0 2.9V 8.0 3.0V 10.0 12.0 Capacity (mAh) * c.o.v. : Cut off Voltage Micro Battery 2017 7 MS Lithium Rechargeable Battery 3V Type CHARACTERISTICS MS614SE Charge/discharge characteristics Discharge Characteristics at Various Discharge Current 3.5 3.5 Charge: max. 0.1mA/3.1V, 96 hours (CC/CV) Discharge: respective current/c.o.v. = 1.5V (CC) 3.0 Voltage (V) Voltage (V) 3.0 2.5 2.0 1.5 1.0 0.0 10µA 5µA 2.5 2.0 Charge: max. 0.1mA/3.1V, 96 hours (CC/CV) Discharge: 15µA/c.o.v. = 1.5V (CC) 1.0 2.0 3.0 1.5 0.0 4.0 300µA 1.0 Capacity (mAh) Voltage (V) 3.0 Overdischarge Characteristics 2.0 3.0 2.5 −20°C 2.0 1.5 0.0 4.0 25°C 40°C 1.0 1.5 0.0 3.0 20 days 1.0 Initial 100 days 2.0 Capacity (mAh) 8 3.5 Voltage (V) Voltage (V) 2.5 150 days 200 days 2.0 3.0 4.0 Floating Characteristics (60°C, applied voltage 3.1V) Storage condition: respective period at 60°C [Capacity measurement conditions] Charge: max. 0.1mA/3.1V, 96 hours (CC/CV) Discharge: 15µA/c.o.v. = 2.0V (CC) 2.0 60°C 0°C Capacity (mAh) High Temperature (60°C) Storage Characteristics 3.0 4.0 Discharge Temperature Characteristics Capacity (mAh) 3.5 3.0 3.0 180 days 90 days Initial 1.0 2.0 Charge: max. 0.1mA/3.1V, 96 hours, RT (CC/CV) Discharge: 15µA/c.o.v. = 2.0V, respective temperature (CC) 30 days 2.0 1.5 0.0 3.5 Overdischarge: 18kΩ discharge/respective period [Capacity measurement conditions] Charge: max. 0.1mA/3.1V, 96 hours (CC/CV) Discharge: 15µA/c.o.v. = 2.0V (CC) 2.5 50µA 15µA Capacity (mAh) Voltage (V) 3.5 100µA Storage conditions: Each period at 60°C, applied voltage 3.1V [Capacity measurement conditions] Charge: max. 0.1mA/3.1V, 96 hours (CC/CV) Discharge: 15µA/c.o.v. = 2.0V (CC) 20days 2.5 Initial 150 days 200 days 2.0 60 days 80 days 3.0 4.0 1.5 0.0 1.0 100 days 40 days 60 days 80 days 2.0 3.0 4.0 Capacity (mAh) Micro Battery 2017 MS Lithium Rechargeable Battery 3V Type DIMENSIONS OF STANDARD TERMINALS OF MS LITHIUM RECHARGEABLE BATTERIES 12.8 0.5±0.2 0 -1.0 0.5±0.2 0.5±0.2 1.7±0.5 (Sn plated portion) MS614SE φ 9.5max. φ 6.8max. 1.8±0.5 (Sn plated portion) (3.3) 2.7max. 2.8max. 0.15±0.02 1.8max. 1.8±0.5 (Sn plated portion) 2.5±0.3 2.1±0.5 0.15±0.02 0.5±0.1 1±0.3 2±0.3 0.5±0.1 φ 6.8max. 0.1±0.02 +0.3 2.5 -0.5 2±0.3 MS920SE / MS920T FL27E 2.1±0.2 2.1±0.4 2.1max. 0.5±0.1 1.6±0.5 (Sn plated portion) 2±0.3 MS621FE / MS621T FL11E 2.2±0.3 φ 5.8max. 1.6±0.5 (Sn plated portion) 0.1±0.02 1.6max. 0.1±0.02 1.75±0.1 0.5±0.2 1±0.3 2±0.3 MS614SE FL28E 2.2±0.5 1±0.3 0.5±0.1 2±0.3 0.5±0.1 1.65max. 1.6±0.5 (Sn plated portion) 1.75±0.1 φ 4.8max. φ 4.8max. 2.2±0.5 MS518SE FL35E 0.5±0.1 2±0.3 1±0.3 0.5±0.1 0.5±0.1 0.1±0.02 1.75±0.1 1±0.3 MS412FE FL26E MS414GE FL26E 1.8±0.5 (Sn plated portion) 1.7±0.5 (Sn plated portion) MS621FE +0.10 -0.05 2.05 φ 6.8max. +0.07 -0.10 1.4 φ 6.8max. MS Lithium Rechargeable batteries are also available as bare cell (without terminals). - Units: mm - The hatched parts are tin plated (Sn: 100%). Micro Battery 2017 9 MS Lithium Rechargeable Battery MS-T series 3V Type MS920T / MS621T FEATURES • RoHS Compliant • Approved by UL (Underwriters Laboratories Inc.) UL File No. MH15628 APPLICATIONS Backup power for Real Time Clock, or memory ＜Application＞ Automotive equipment, Security cameras, electronic power, gas and water meters, electronic devices where PCB temperature increases. “MS621T” and “MS920T” have improved both higher and lower temperature characteristics while leaving features of the conventional MS rechargeable batteries. They offers wider temperature range from -40℃ to 85℃. SPECIFICATIONS Nominal Voltage (V) Type Internal Impedance (Ω)*2 Nominal Capacity (mAh)*1 Operating Temperature Range Size (mm) Diameter Height Weight (g) MS621T 3 3.0 80 −40℃ to +85℃ 6.8 2.1 0.23 MS920T 3 6.5 60 −40℃ to +85℃ 9.5 2.0 0.45 * Please confirm the operating conditions, etc. with your contact at SII. We would like to provide the detail characteristics of MS920T and MS621T. *1. Nominal capacity: Typical value of discharge capacity between 3.1V and 2.0V *2. A constant voltage charge is recommended, but due to a limit in charge current, it is necessary to insert a resistor to regulate the charge current. Please see Page 19 for resister value. Contact us for further details. If a constant current charge is required, contact us for more information. MS Lithium Rechargeable Batteries are not reflowable. Please mount them on PCB by hand soldering. CHARACTERISTICS • Charge Voltage Characteristics MS621T MS920T 9 3 2 Charge: max. 100μA/respective voltage/ 96 hours/RT(CC/CV) Discharge: 15μA/c.o.v.=2.0V/RT (CC) 1 0 2.7 2.8 2.9 3.0 3.1 Charge Voltage (V) 10 Capacity (mAh) Capacity (mAh) 4 3.2 3.3 3.4 8 7 6 5 4 3 2 1 0 2.7 Charge: max. 200μA/respective voltage/ 72 hours/RT(CC/CV) Discharge: 25μA/c.o.v.=2.0V/RT (CC) 2.8 2.9 3.0 3.1 3.2 3.3 3.4 Charge Voltage (V) Micro Battery 2017 MS Lithium Rechargeable Battery MS-T series 3V Type CHARACTERISTICS • Discharge characteristics (-40℃ capacity) MS621T Discharge Characteristics 3.2 MS621T maintains about 1.2mAh at -40℃. Voltage (V) 3.0 2.8 2.6 25℃ 2.4 2.2 2.0 * Charge Discharge condition Charge: 3.1V, 96 hours, max. 100μA, RT Discharge: 15μA, c.o.v.=2.0V, RT −40℃ 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Capacity (mAh) MS920T Discharge Characteristics 3.6 MS920T maintains about 3.5mAh at -40℃. 3.4 Voltage (V) 3.2 3.0 2.8 2.6 25℃ 2.4 2.2 2.0 * Charge Discharge condition Charge: 3.1V, 72 hours, max. 200 μA, RT Discharge: 25 μA, c.o.v.=2.0V, RT −40℃ 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Capacity (mAh) • High temperature characteristics (85℃ storage) Storage period - Capacity retention ratio Capacity retention ratio (%) 120 MS-T series's capacity retention ratio after High temperature storage were greatly improved. 100 * 85℃ use of Conventional MS series is not guaranteed. 80 MS920T 60 MS920SE * Charge Discharge condition MS920T Charge: 3.1V, 72 hours, max. 200 μA, RT Discharge: 25 μA, c.o.v.=2.0V, RT MS621T Charge: 3.1V, 96 hours, max. 100 μA, RT Discharge: 15 μA, c.o.v.=2.0V, RT MS621T 40 MS621FE 20 0 0 480 960 1440 1920 2400 2880 3360 3840 Storage period (hours) *c.o.v.…cut off voltage Micro Battery 2017 11 TS Lithium Rechargeable Battery 1.5V Type TS621E / TS920E FEATURES • Low-voltage rechargeable • High capacity • Long cycle life: at least 1000 cycles (20% D.O.D.) • RoHS Compliant • Approved by UL (Underwriters Laboratories Inc.) UL File No. MH15628 (TS621E only) APPLICATIONS TS lithium rechargeable batteries are high capacity 1.5V type non-reflowable rechargeable batteries that provide sufficient discharge capacity with a charge voltage of less than 2.0V. Solar Watch (as main battery) Small mobile equipment (backup power supply for Real Time Clock) ＜Application＞ Security Camera, Digital Camera, Action Camera, GPS equipments, Event Data Recorder, Handy Terminal, PC, Smart phone. SPECIFICATIONS Standard Nominal Capacity Internal (Voltage Range V) Impedance*1 Discharge Current (mA) (mAh) (Ω) Type Nominal Voltage (V) Charge Voltage*3 (V) TS621E 1.5 1.5 to 3.0 1.3 (1.5 to 1.0) 2.5 (2.3 to 1.0) 50 0.025 TS920E 1.5 1.5 to 3.0 5.5 (2.3 to 1.0) 20 0.05 Cycle Life*2 (Time) Diameter Height Weight (mm) (mm) (g) *4 1000 (20% D.O.D.) 100 (100% D.O.D.) 1000 (20% D.O.D.) 50 (100% D.O.D.) 6.8 2.1 0.23 9.5 2.0 0.46 *1. Value measured using an AC (Alternating Current) method in the fully charged state. *2. Counts of charge and discharge repetition that maintains about 50% of the minimum guaranteed capacity *3. A constant voltage charge is recommended, but due to a limit in the charge current, it is necessary to insert a resistor to regulate the charge current. Please contact us for further details. If a constant current charge is required, please contact us for more information. *4. D.O.D. : Depth of Discharge TS Lithium Rechargeable Batteries are not reflowable. Please mount them on PCB by hand soldering. CHARACTERISTICS • Charge/discharge characteristics 2.5 2.0 2.0 Voltage (V) TS920E 2.5 Voltage (V) TS621E 1.5 1.0 0.5 0.0 0.0 Charge: max. 200μA/2.3V/48 hours (CC/CV) Discharge: 25μA/c.o.v.= 1.0V (CC) 0.5 1.0 1.5 2.0 Capacity (mAh) 1.5 1.0 0.5 2.5 3.0 0.0 0 Charge: max. 200μA/2.3V/72 hours (CC/CV) Discharge: 50μA/c.o.v.=1.0V (CC) 1 2 3 4 5 6 Capacity (mAh) * c.o.v. : Cut off Voltage 12 Micro Battery 2017 TS Lithium Rechargeable Battery 1.5V Type CHARACTERISTICS • Charge Voltage Characteristics TS920E 3.0 7 2.5 6 2.0 Capacity (mAh) Capacity (mAh) TS621E 1.5 1.0 Charge: max. 200μA/respective voltage/ 48 hours (CC/CV) Discharge: 25μA/c.o.v.= 1.0V (CC) 0.5 0.0 1.0 1.5 2.0 2.5 5 4 3 2 Charge: max. 200μA/respective voltage/ 72 hours (CC/CV) Discharge: 50μA/c.o.v.= 1.0V (CC) 1 0 1.0 3.0 1.5 Charge Voltage (V) 2.0 2.5 3.0 Charge Voltage (V) TS920E High Temperature Storage Characteristics (60ºC) Float-Charge Characteristics (60ºC) 100 100 Capacity retention ratio (%) 120 Capacity retention ratio (%) 120 80 60 40 Storage Condition: 60°C [Capacity measurement conditions] Charge: max. 200μA/2.3V/72 hours (CC/CV) Discharge: 50μA/c.o.v.= 1.0V (CC) 20 0 0 20 40 60 80 100 80 60 40 Storage Condition: 60°C/2.3V applied [Capacity measurement conditions] Charge: max. 200μA/2.3V/72 hours (CC/CV) Discharge: 50μA/c.o.v.= 1.0V (CC) 20 0 120 0 20 Storage Period (days) 40 60 80 100 120 Float Charge Period (days) STANDARD TERMINALS TS621E FL11E TS920E FL27E 0 -1.0 0.5±0.2 0.5±0.2 0.5±0.2 1±0.3 2±0.3 0.5±0.2 2±0.3 12.8 1.7±0.5 (Sn plated portion) 2.7max. 2.8max. 0.15±0.02 1.8±0.5 (Sn plated portion) (3.3) 1.8±0.5 φ 9.5max. φ6.8max. 2.5±0.3 0.15±0.02 2.1±0.5 2.1±0.2 (Sn plated portion) 1.7±0.5 (Sn plated portion) - Units: mm - The hatched parts are tin plated (Sn: 100%). Micro Battery 2017 13 ML Lithium Rechargeable Battery Reflowable ML414H FEATURES • Reflowable: Superior heat resistance (260°C peak) allows reflow soldering by Pr-free solder • Large Capacity: 1.0mAh (typical) (3.1V charge - 2.0V Cut-off) • Operation over a wide temperature range: Operating temperature range: −20°C to +60°C Consult us for using the battery at a temperature beyond the above temperature range. • RoHS Compliant • Approved by UL (Underwriters Laboratories Inc.) UL File No. MH15628 ML414H is environment-friendly rechargeable battery that can be reflowed with lead-free solder. SPECIFICATIONS Type Nominal Voltage (V) Charge Voltage*3 (V) ML414H 3 2.7 to 3.1 APPLICATIONS Backup power for Real Time Clock, or memory Security Camera, Digital Camera, Action Camera, GPS equipments, Event Data Recorder, Handy Terminal, PC, Smart phone. Nominal Capacity Internal Standard (Voltage Range V) Impedance*1 Discharge Current (mAh) (Ω) (mA) 1.0 (3.1 to 2.0) 600 Cycle Life*2 (Time) Diameter Height Weight (mm) (mm) (g) *4 0.005 300 (100% D.O.D.) 4.8 1.4 0.07 *1. Value measured using an AC (Alternating Current) method in the fully charged state. *2. Counts of charge and discharge repetition that maintains about 50% of the minimum guaranteed capacity *3. A constant voltage charge is recommended, but due to a limit in the charge current, it is necessary to insert a resistor to regulate the charge current. Please contact us for further details. If a constant current charge is required, please contact us for more information. *4. D.O.D. : Depth of Discharge Max. charging voltage of ML414H is 3.1V. STANDARD TERMINALS CHARACTERISTICS ML414H IV01E 3.5 45° 4.1 1.7 φ4.8max. 3.0 Recommended board layout (Tolerance : ±0.05) 0.4 0.6 0.8 Capacity (mAh) * c.o.v. : Cut off Voltage 1.0 1.2 1.4 1.24 2.4±0.2 1.24 0.2 0.8±0.5 (Sn plated portion) ＋0.1 0.2 0 0.1±0.02 2.4±0.2 2.4±0.2 Charge: max. 30μA/3.1V/72 hours (CC/CV) Discharge: 5μA/c.o.v.=2.0V (CC) 1±0.1 2.4±0.2 1.5 0.0 3.5±0.1 1±0.5 2.0 1.67±0.1 2.5 (Sn plated portion) Voltage (V) 2.4 2.7 6 2. 2.7 2.4 5.4 • Charge/discharge characteristics - Units: mm - The hatched parts are tin plated (Sn: 100%). 14 Micro Battery 2017 CPX Capacitor CPX3225A Chip-type Electric Double Layer Capacitor (EDLC), CPX series offers low internal impedance and very small leak current. CPX Capacitors allow discharge current up to several tens of mAs, and super rapid charging by small electromotive force. FEATURES 1. Large discharge current and super rapid charging achieved by low internal impedance 2. Small leak current CPX capacitor allows sufficient charging with several micro watts of energy harvesting power source. 3. Long life span, high reliability Superior air-tight ceramic package reduces storage deterioration in high temperature / high humidity environments, assuring long term reliability. 4. Reflowable, small and thin The chip-type design makes it possible to reflow. SPECIFICATIONS Par number Maximum Use Voltage (V) Capacitance (mF) Internal Impedance (ESR) (Ω) Size (LxWxH) (mm) Operating Temperature Range Weight (g) CPX3225A752D 2.6 7.5 25 3.2×2.5×0.9 -30℃ to +70℃ 0.024 APPLICATIONS • • • • Power backup of instantaneous battery detachment Power assist for main battery Electric storage device for energy harvesting Peak load leveling of primary battery Suggested Applications • • • • Handy terminals, Payment terminals Wireless sensor network devices NFC-enabled mobile devices Battery powered medical devices etc. Micro Battery 2017 15 CPH Capacitor Reflowable CPH3225A FEATURES CPH3225A is thinnest and smallest chip-type electric double layer capacitor. The unique ceramic packaging with superior air-tightness is used. As the result, it offers leakage resistance and humidity resistance. Also, by optimizing its materials, a 1 minute rapid charge stores approximately 85% of full capacity. Its heat-resistant design allows for Pb-free reflowable SMT board attachment. • Small and thin size • Excellent leakage resistance and humidity resistance • Reflowable: Superior heat resistance (260°C peak) allows reflow soldering by Pr-free solder • Long cycle Life: At least 10,000 times of charge/discharge • Simple Charging circuit (constant voltage charging) • Wide operating temperature range: Operating temperature range: −20°C to +60°C For use the battery at a temperature out of the above temperature range, please consult us. • RoHS Compliant APPLICATIONS Backup Power for various devices. Super small size power supply. Smartphone, Tablet, Cellphone, Personal computer, IC card, Game machine, Handy terminal, Video camera, various kinds of small appliance, etc. SPECIFICATIONS Type Maximum Use Voltage (V) Nominal Capacity (Voltage Range) Capacitance Internal Impedance* (Ω) Size(L × W × H) (mm) Weight (g) 3.3 4.6µAh (3.3V-1.8V) 0.011F 160 3.2 × 2.5 × 0.9 0.025 CPH3225A *. Value measured using AC (Alternating Current) method at the discharged state. • Prohibition ripple charging A ripple (high frequency fluctuation of voltage) in the charge voltage extremely lowers the capacitor performance. Be sure to charge capacitors with a stable voltage. • Charge voltage The age deterioration of the capacitor depends on the charge voltage. The age deterioration is accelerated as charge voltage goes higher. • Usage environment Aging degradation of the capacitor varies depending on the usage environment (temperature and humidity). Contact us for further details. CHARACTERISTICS Charge/discharge characteristics 3.5 3.0 Voltage (V) 2.5 2.0 1.5 1.0 Charge: max. 1 mA/3.3V/2 hours (CC/CV) Discharge: 5µA/c.o.v.= 0V (CC) 0.5 0.0 0 2 * c.o.v. : Cut off Voltage 16 4 6 Capacity (µAh) 8 10 Micro Battery 2017 CPH Capacitor Reflowable CHARACTERISTICS Charge Time Characteristics 100 80 60 40 Charge: max. 10mA/3.3V/ respective charge time (CC/CV) Discharge: 5µA/c.o.v.= 2.0V (CC) 20 0 0 1 10 Float-Charge Characteristics (60ºC, 90%RH) 120 Capacity retention ratio (%) Capacity retention ratio (%) 120 100 100 80 60 40 20 0 1000 Storage condition: 60°C/90%RH/3.3V applied [Capacity measurement conditions] Charge: max. 1mA/3.3V/2 hours (CC/CV) Discharge: 5µA/c.o.v.= 2.0V (CC) Charge Time (minutes) 0 5 10 15 20 Float Charge Period (days) REFLOW SOLDERING CONDITIONS Reflow Profile Example The peak temperature is within five seconds. Peak temperature (°C) Temperature (°C) 250 200 150 Time above 200°C 100 50 0 Recommended Reflow Conditions 270 0 50 100 150 200 250 260 250 240 230 220 300 0 10 20 30 40 50 60 70 Time above 200°C (seconds) Time (seconds) The times of repeated reflow soldering must be two times or less. The Temperature must be measured at top of the cell. Max. 260°C (within 5 seconds) DIMENSIONS CPH3225A 3.6 1.4 2.5±0.1 1.4 0.2 1.4 1.4 Recommended board layout (Tolerance : ±0.05) 0.9±0.1 3.2±0.1 1.0±0.15 (0.15) 1.0±0.1 1.0±0.1 (0.15) 1.0±0.15 - Units: mm Micro Battery 2017 17 Mercury Free Silver Oxide Battery : FEATURES • Able to discharge mA level of pulse current • Small diameter (11.6mm and less) - Height ranges from 1.25mm to 5.4mm. - Diameter ranges from 4.8mm to 11.6mm. • Large energy density APPLICATIONS SEIZAIKEN, Mercury Free Silver Oxide Batteries by Seiko Instruments Inc., has grown with the history of quartz watches. Silver Oxide Batteries have high density of energy per volume and are able to supply stable voltage for a long time. SEIZAIKEN Batteries are suitable to power BLE(Bluetooth Low Energy), wearable devices, and information devices. Devices that require high discharge pulsing Stylus pen for tablets, disposable devices, thermometers, .... SPECIFICATIONS Type Nominal Voltage (V) Nominal Capacity (mAh) Discharge Level SR ** SW 1.55 5.5 to 160 SR ** W 1.55 28 to 160 Dimensions (mm) Diameter Height Weight (g) Low current 4.8 to 11.6 1.25 to 5.40 0.11 to 2.20 High current 6.8 to 11.6 2.05 to 5.40 0.39 to 2.20 CHARACTERISTICS • Comparisons at 10mA for1 sec Pulse Discharge and c.o.v.2.0V SR920W (2 pcs in series) Test result of pulse discharge SR920W 25°C 3.00 3.00 2.50 2.50 2.00 1.50 14,190 times of Pulse 1.00 0.50 0.00 Test result of pulse discharge CR1025 25°C 3.50 Voltage/V Voltage/V 3.50 CR1025 2.00 1.50 1.00 2,031 times of Pulse 0.50 0 5000 10000 15000 Pulse Number 0.00 0 5000 10000 15000 Pulse Number • Discharge characteristics SR920W Discharge characteristics 1.8 1.7 Voltage (V) 1.6 1.5 1.4 1.3 1.2 1.1 1 18 Discharge : Load:15kΩ / 23℃ 0 10 20 30 Capacity (mAh) 40 50 Micro Battery 2017 Mercury Free Silver Oxide Battery : is our trademark for silver oxide battery globally acknowledged in the quartz watch market. • Low Drain Battery Model Characteristics (RT) Dimensions Standard Discharge Current (μA) Diameter (mm) Height (mm) 10 4.8 1.65 20 4.8 2.15 5.5 5 5.8 1.25 12.5 20 5.8 1.65 13 16 20 30 5.8 1.55 22 40 1.55 16 JIS code IEC code Nominal Voltage (V) Standard*1 Capacity (mAh) SR416SW 337 1.55 7.5 SR421SW 348 1.55 12 SR512SW 335 1.55 SR516SW 317 1.55 SR521SW 379 1.55 SR527SW 319 SR616SW 321 C.C.V.*2 Weight (g) at 24℃ (V) at −10℃ (V) 0.11 1.35 1.10 0.14 1.35 1.10 0.15 1.45 1.10 0.18 1.45 1.10 2.15 0.23 1.45 1.10 5.8 2.70 0.29 1.45 1.10 20 6.8 1.65 0.25 1.45 1.10 30 40 6.8 2.15 0.32 1.45 1.20 SR621SW 364 1.55 21 23 SR626SW 377 1.55 24 28 30 30 40 40 6.8 2.60 0.39 1.45 1.20 SR712SW 346 1.55 10 10 7.9 1.25 0.26 1.45 1.20 SR714SW 341 1.55 15 20 7.9 1.45 0.29 1.45 1.20 SR716SW 315 1.55 21 30 7.9 1.65 0.33 1.45 1.20 40 40 7.9 2.10 0.42 1.45 1.20 SR721SW 362 1.55 23 28 SR726SW 397 1.55 34 40 7.9 2.60 0.52 1.45 1.20 SR731SW 329 1.55 36 50 7.9 3.10 0.56 1.45 1.20 SR41SW 384 1.55 45 50 7.9 3.60 0.67 1.45 1.20 SR912SW – 1.55 15 20 9.5 1.25 0.40 1.45 1.20 SR916SW 373 1.55 27 50 9.5 1.65 0.51 1.45 1.20 SR920SW 371 1.55 35 46 50 60 9.5 2.05 0.60 1.45 1.20 SR927SW 395 1.55 53 60 80 100 9.5 2.70 0.75 1.45 1.20 SR936SW 394 1.55 85 140 9.5 3.60 1.10 1.45 1.20 SR1120SW 381 1.55 53 80 11.6 2.05 0.93 1.45 1.20 SR1130SW 390 1.55 80 100 11.6 3.05 1.29 1.45 1.20 SR43SW 301 1.55 120 150 11.6 4.20 1.75 1.45 1.20 SR44SW 303 1.55 160 180 11.6 5.40 2.20 1.45 1.20 *1 The standard capacity is calculated by the measurement result of discharging time with the standard discharge current to the voltage 1.2V. *2 C.C.V.: Closed Circuit Voltage / Low Drain 2kΩ 7.8msec Pulse • HIGH Drain Battery Model Characteristics (RT) Dimensions Standard Discharge Current (μA) Diameter (mm) Height (mm) 50 6.8 2.60 26 50 7.9 34 50 7.9 JIS code IEC code Nominal Voltage (V) Standard*1 Capacity (mAh) SR626W 376 1.55 28 SR721W 361 1.55 SR726W 396 1.55 C.C.V.*2 Weight (g) at 24℃ (V) at −10℃ (V) 0.39 1.35 0.95 2.10 0.41 1.35 1.05 2.60 0.52 1.35 1.05 SR41W 392 1.55 45 80 7.9 3.60 0.67 1.35 1.05 SR920W 370 1.55 42 80 9.5 2.05 0.60 1.40 1.00 SR927W 399 1.55 53 60 90 110 9.5 2.70 0.75 1.40 1.05 SR1120W 391 1.55 53 90 11.6 2.05 0.93 1.40 1.20 SR1130W 389 1.55 80 130 11.6 3.05 1.29 1.40 1.20 SR43W 386 1.55 120 220 11.6 4.20 1.75 1.40 1.20 SR44W 357 1.55 160 250 11.6 5.40 2.20 1.40 1.20 *1 The standard capacity is calculated by the measurement result of discharging time with the standard discharge current to the voltage 1.2V. *2 C.C.V.: Closed Circuit Voltage / High Drain 200Ω 5sec DC Micro Battery 2017 19 Charging Circuit CHECK SHEET If you are considering the purchase of one or more of our microbatteries or capacitors, please complete this check sheet and send it to us. We will let you know which products will be optimum for you to use. Fax Sheet Micro-Energy Division Sales Sec. +81-43-211-8034 Battery Sales Person 1. Your company name 2. Which application do you use? 3. Your expected backup period hour / day / month 4. Your requested delivery date mm / yy 5. Operation voltage of the device for backup 6. Consumption current at backup time V to V mA • mA 7. Setting value of charging voltage V 8. Presence of reverse current protection diode 9. Vf characteristics of the reverse current protection diode (at 10μA) 10. Resistance value of charging protection resistance Yes • No V W 11. Limit of charging time 12. Required cycle life times 13. Other requests 14. Expected life (e.g., xx years or backup for xx hours) 15. Ambient temperature and humidity Your contact information Name Section Phone Fax E-mail 20 Micro Battery 2017 Environmental Activities Environmental Activities at Micro-Energy Division Environment & Quality Policy Seiko Instruments Inc., Micro-Energy Division is located in Ayashi, a city with beautiful nature, in Miyagi Prefecture. Our aim is to provide customer satisfaction and harmony with the environment through all our products, from Micro battery to other electronic products, and sales activities. 1. We adhere firmly to laws, regulations and customers’ specified requirements. 2. We aim to prevent pollution, to reduce CO2, and to conserve biodiversity. 3. We set goals, take actions, conduct regular reviews, and improve the system and performance continuously. 4. We contribute to the society by supporting green procurement, developing green products, and promoting green life activity. 5. We adhere to regulations and recommodations regarding Chemical substance content in our products and will promote reduction and replacement. 6. We vigorously educate ourselves and try to engage voluntarily in green life activity. Based on the above policy, the following six environmental approaches are now being implemented throughout Micro-Energy Division. 1. Enrich the line up of Eco-Products • We introduced the SII Green Product Label System which is equivalent to the ISO 14021 Type II environmental label. At the end of FY2006, 100% of our products are certified as SII Green Products. In addition, 42 products are certified as SII "High Grade" Green Products. 2. Reduction of Greenhouse Gas • We practice various CO2 reduction measures like using Eco-machinery. Since 1997, we have successfully reduced a total of 60,700 tons of CO2. We believe our efforts contribute to the prevention of global warming. 70,000 ton CO2 Reduction amount of CO2 (accumulated since 1997) 60,000 50,000 40,000 30,000 20,000 10,000 0 97 98 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 Result 15 16 target 3. 3R Promotion Activity • We have promoted the "reduce and reuse" activities and also promoted recycling at the end of the production process. With these activities, we achieved "Zero-emission" in 2004. We have reduced the non-recyclable wastes to less than 1 ton - less than 1% of our 1997 results. ton CO2 80 Final amount of waste 70 60 50 40 30 20 10 0 97 98 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 Result 15 16 target 4. Biodiversity Conservation • We endeavor to deepen our understanding on the relevancy between biodiversity and our business activities, and to contribute to the conservation of biodiversity by participating local community activities. 5. Green Purchasing • We adhere to a green purchasing campaign through the purchase of ingredients, manufacturing materials, and other necessary products, whenever appropriate. 6. Green Life • With the participation of all of Micro-Energy Division members, we deploy a clean-up and beautification campaign in all areas surrounding our factory once a year. In addition, we participate in the clean up activity at Hirose River once a year. 7. Conflict Minerals • Recognizing the international importance of conflict minerals issue, we prohibit the use of such minerals. Micro Battery 2017 21 Precautions for Your Safety SII Lithium rechargeable batteries (MS, ML, TS) contain flammable organic solvents. For your safety, please follow following prohibitions. WARNING! 1. Do not charge by high current or high voltage. Doing so may generate gas inside the battery, resulting swelling, fire, heat generation or bursting. 2. Do not heat, disassemble nor dispose of in fire Doing so damages the insulation materials and may cause fire, heat generation, leakage or bursting. 3. Do not solder directly to the battery If soldering is performed directly to the battery, the battery is heated up, consequently causing leakage, explosion or fire due to overheating from internal short-circuit. 4. Do not short. If the (+) and (-) come into contact with metal materials, short-circuit occurs. As a result, fire, heat generation, leakage or bursting may occur. 5. Keep batteries out of children’s reach. It is dangerous that children swallow the battery. When you design mechanical hardware around the battery, please fix the battery firmly in order to prevent children from removing it. When you store the batteries, please keep the batteries out of children’s reach. If a battery is swallowed, consult a physician immediately. 7. Do not weld terminals to the battery The heat by welding may cause fire, heat generation, leakage or bursting. We weld standard terminals under strictly controlled conditions. If you need to weld terminals to the battery, please consult us in advance. 8. Do not discharge by force If the battery is discharged by direct connection to an external power supply etc., voltage of the battery will decline lower than 0 volts (electrical reversal) and will cause the battery case to expand, overheat, leak, explode or burn. 9. In case of leakage or a strange smell, keep away from fire to prevent ignition of any leaked electrolyte. 10. In case of disposal, insulate between (+) and (-) of battery by an insulating material. Jumbling batteries or with other metal materials cause short-circuit. As a result, fire, heat generation, leakage or bursting may occur. Do not jumble batteries Short-circuiting 6. Do not reverse placement of (+) and (-) If the (+)and(-) side of the battery is reverse inserted, it may cause a short-circuit or over discharge of the battery on some equipment and it may induce overheating, explosion or fire. Example Example of insulation Insulating tape discharge discharge Contacting between batteries cause short-circuiting such as above diagram. CAUTION! 1. If leaked liquid gets in the eyes, wash them with clean water and consult a physician immediately. 2. Do not use new and used batteries together. Do not use different types of batteries together. 5. Do not apply strong pressure to the batteries nor handle roughly. 3. If you connect two or more batteries in series or parallel, please consult us in advance. 7. Keep batteries away from direct sunlight, high temperature and humidity. 4. Do not use nor leave the batteries in direct sunlight nor in high-temperature areas. 8. Do not make batteries airtight by sealing it with adhesive agent or coating agent. It may cause fire, heat generation, leakage or bursting. It may cause bursting or fire due to unbalanced load or voltage. It may cause fire, heat generation, leakage or bursting. It may cause fire, heat generation, leakage or bursting. 6. Avoid contact with water. It may cause heat generation. It may cause heat generation or performance deterioration. It may cause short-circuit because of generated and accumulated electrolyte gas. For prevention of performance deterioration of battery 1. Pay attention to mat or sheet for ESD Battery with tabs or battery on PCB may short circuit on the mat for ESD. As a result, the voltage of the cell is reduced. 2. Pay attention to soldering by tips Do not touch the battery by soldering iron tips directly. Keep any high temperature process away from battery. 3. Pay attention to material of jig for pick and place Use non-conductive material of jig for pick and place of batteries, for short-circuit protect. If short-circuit of battery occurs, the voltage of battery drops down quickly but raises gradually. 4. Pay attention to washing and drying Some detergent or high temperature drying may cause deteriorate of battery. If you need to wash batteries, consult us. International Transportation and Disposal • International Air / Marine / Ground Transportation Regarding the transport of Lithium battery, organizations like IATA, ICAO, IMO, DOT have determined transport regulations, based on the United Nations Regulations. Regarding air transport, SII Lithium rechargeable batteries can be transported being not subject to the provisions of dangerous goods, if the transportations meet the following requirements. Please contact us for more details. Regarding marine or ground transport, please contact us for more details, too. (a) Batteries are separated each other, and are packed in strong packaging so as to prevent short-circuit. (b) Lithium battery handling label (IATA prescribed), indicating that the packages contain Lithium batteries, that the packages must be handled with care, and that special procedures should be followed in the event that the package is damaged, and a telephone number for additional information, must be put on each package. (c) “CARGO AIRCRAFT ONLY” Label must be put on each package. (d) Each shipment must be accompanied with a document indicating that the packages contain Lithium batteries, that the packages must be handled with care, that it must not be 22 transported by passenger flight, and that special procedures should be followed in the event that the package is damaged, and a telephone number for additional information. (e) Each package is capable of withstanding a 1.2m drop test in any orientation without damage to batteries contained. (f) Net weight of one package may not exceed 2.5 kg. (g) The shipment must be “one carton per one shipment” to be shipped as “Non-dangerous goods”. “One shipment” means one airway bill = one invoice. [Transport as dangerous goods] When you transport SII’s Lithium rechargeable batteries by “more than one carton per one shipment”, you will have to arrange it as “Dangerous goods”. It requires special procedures, like “Class 9 dangerous goods Label” on carton, and “dangerous goods declaration”. • Disposal Recently environmental protection regulations have increased and battery disposals are regulated globally. Such regulations are different in each country, state, and municipality. Please consult your local authorities regarding the specific regulations in your area. Micro Battery 2017 Precautions for Your Safety Micro-Energy Division capacitors (CPH, CPX) contain flammable organic solvents. For your safety, please follow the following precautions. WARNING! When you store the capacitors, please keep the capacitors out of children’s reach. If a capacitor is swallowed, consult a physician immediately. • Do not charge by higher current or higher voltage than specified. Doing so may generate gas inside the capacitor, resulting in swelling, fire, heat generation or bursting. • Do not heat, disassemble nor dispose of in fire Doing so damages the insulation materials and may cause fire, heat generation, leakage or bursting. • Do not reverse placement of (+) and (-) SII capacitors have polarity. If the (+) and (-) side of the capacitor is reverse inserted, it may cause short-circuit or over discharge of the capacitor on some equipment and it may induce overheating, explosion or fire. • Do not discharge by force If the capacitor is discharged by direct connection to an external power supply etc., voltage of the capacitor will decline lower than 0 volts (electrical reversal) and will cause the capacitor case to expand, overheat, leak, explode or burn. • Keep capacitors out of children’s reach. It is dangerous that children swallow the capacitor. When you design mechanical hardware around the capacitor, please fix the capacitor firmly in order to prevent children from removing it. • In case of leakage or a strange smell, keep away from fire to prevent ignition of any leaked electrolyte. CAUTION! • Do not use new and used capacitors together. Do not use different types of capacitors together. • If leaked liquid gets in the eyes, wash them with clean water and consult a physician immediately. • Do not use nor leave the capacitors in direct sunlight nor in high-temperature areas. It may cause fire, heat generation, leakage or bursting. • If you connect two or more capacitors in series or parallel, please consult us in advance. It may cause fire, heat generation, leakage or bursting. It may cause bursting or fire due to unbalanced load or voltage. • Do not make the capacitor airtight by sealing it with adhesive agent or coating agent. • Keep capacitors away from direct sunlight, high temperature and humidity. It may cause short-circuit because of generated and accumulated electrolyte gas. It may cause heat generation or performance deterioration. For using SII Silver Oxide batteries, please follow the following precautions. WARNING! fix the battery firmly in order to prevent children from removing it. When you store the batteries, please keep the batteries out of children’s reach. If a battery is swallowed, consult a physician immediately. • Do not heat, disassemble nor dispose of in fire Doing so damages the insulation materials and may cause fire, heat generation, leakage or bursting. • Do not short. If the (+) and (-) come into contact with metal materials, shortcircuit occurs. As a result, fire, heat generation, leakage or bursting may occur. • If leaked liquid, alkaline, get in the eyes, do not rub them, wash them with clean water and consult a physician immediately. • If leaked liquid, alkaline, stick to clothing, for protecting from irritation, wash them with clean water immediately. • Keep batteries out of children’s reach. It is dangerous that children swallow the battery. When you design mechanical hardware around the battery, please CAUTION! • Make sure to insert batteries without having (+) and (-) come in contact with metal parts of equipment. • Read the equipment instruction manual and precautions carefully before using. Some usage or types of equipment do not suit the specifications or performance of these batteries. • Remove batteries from the equipment, if finished using. Do not leave batteries connecting with equipment after using. • Do not reverse placement of (+) and (-) • Do not solder directly to the battery • Do not use new and used batteries together. Do not use different types of batteries together. • Do not charge. • Do not use nor leave the batteries in direct sunlight nor in high-temperature areas. • Keep batteries away from direct sunlight, high temperature and humidity. • Avoid letting battery contact water. • In case of disposal, insulate between (+) and (-) of battery by an insulating material. IMPORTANT 1. The information herein is subject to change without notice. 2. Neither reproduction, duplication nor unauthorized use of this catalog in whole or part is allowed without the prior written approval of Seiko Instruments Inc. 3. The colors of the products reproduced herein (“Products”) may be different from the actual colors. Check colors on actual products before using the Products. 4. Circuits and respective application methods described herein are for reference only. Seiko Instruments Inc. shall not be liable for any damages or losses resulting from any claim by third parties that any Products or application methods described herein infringe any right intellectual property right. All intellectual property rights with respect to the Products belong exclusively to Seiko Instruments Inc. Seiko Instruments Inc. does not grant users of the Products any right or license to the Products hereunder. 5. When Products include Strategic Products (or Services) stipulated in the Foreign Exchange and Trade Control Law, they shall not be exported without permission of governmental authorities. 6. The Products are designed for consumer equipment and cannot be used as part of any device or equipment which influences the human body or requires a significantly high reliability, such as physical exercise equipment, medical equipment, disaster prevention equipment, gas related equipment, vehicles, aircraft and equipment mounted on vehicles without our prior express written consent. All data, dimensions, characteristics and values shown in this catalogue are for reference only. Please contact your local Seiko Instruments Representative for current detailed specifications. Micro Battery 2017 23 Micro-Energy Division who manufactures the products described in this catalog holds the ISO 9001 quality management system certificate, and the ISO 14001 environmental management systems certificate. www.sii-me.com Micro-Energy Division 1-8, Nakase, Mihamaku, Chiba-shi, Chiba 261-8507, Japan Telephone:+81-43-211-1735 Facsimile:+81-43-211-8034 Asia Seiko Instruments (H.K.) Ltd. Seiko Instruments (Shanghai) Inc. Seiko Instruments (H.K.) Ltd. - Shenzhen Rep. Office Seiko Instruments Taiwan Inc. 4-5/F, Wyler Centre 2, 200 Tai Lin Pai Rd., Kwai Chung, N.T., Kowloon, Hong Kong Telephone: +852-2494-5111 Facsimile: +852-2480-5479 Email:sales@sih.com.hk http://www.sih.com.hk Room 2212-15, Office Tower, Shun Hing Square Di Wang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen, 518008, China Telephone: +86-755-8246-2680 Facsimile: +86-755-8246-5140 Room 2701-2703, 27th Floor, Shanghai Plaza, 138 Mid Huaihai Rd., Shanghai 200021, China Telephone: +86-21-6375-6611 Facsimile: +86-21-6375-6727 12F, No.101, Sec.2, Nanking E. Rd., Taipei 104, Taiwan, R.O.C. Telephone: +886-2-2563-5001 Facsimile: +886-2-2563-5580 Email:public@sii.co.jp http://www.sii.com.tw North/Central/South America Europe Seiko Instruments GmbH Siemensstrasse 9 D-63263 Neu Isenburg, Germany Telephone: +49-6102-297-0 Facsimile: +49-6102-297-50100 Email:info@seiko-instruments.de http://www.seiko-instruments.de Seiko Instruments U.S.A., Inc. 21221 S. Western Ave., Suite 250, Torrance, CA 90501, U.S.A. Telephone: +1-310-517-7802 Facsimile: +1-310-517-7792 Email:info@seikoinstruments.com http://www.sii-me.com Contact us (Specifications are subject to change without notice.) Released in February 2017 Printed with soy ink. Copyright©2017 Seiko Instruments Inc. All Right Reserved. No.BAC3016EJ-01C1702