S-1206 Series
www.sii-ic.com
ULTRA LOW CURRENT CONSUMPTION AND
LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
© SII Semiconductor Corporation, 2006-2015
The S-1206 Series is a positive voltage regulator with ultra low current consumption, low dropout voltage, high-accuracy
output voltage, and 250 mA output current developed based on CMOS technology.
I/O capacitors are as small as 0.1 μF. S-1206 Series operates at ultra low current consumption of 1.0 μA (typ.).
The built-in low-on-resistance transistor realizes low dropout voltage and a large output current. A built-in overcurrent
protection circuit prevents the load current from exceeding the current capacity of the output transistor.
Three packages, SOT-23-3, SOT-89-3, and SNT-6A(H) are available.
Compared with voltage regulators using a conventional CMOS technology, more types of capacitors, including small I/O
capacitors, can be used with the S-1206 Series. The S-1206 Series features ultra low current consumption and comes in a
small package, making them most suitable for portable equipment.
Features
• Output voltage:
• Input voltage:
• Output voltage accuracy:
• Dropout voltage:
• Current consumption:
• Output current:
• Input and output capacitors:
• Built-in overcurrent protection circuit:
• Operation temperature range:
• Lead-free, Sn 100%, halogen-free*2
1.2 V to 5.2 V, selectable in 0.05 V step
1.7 V to 6.5 V
±1.0% (1.2 V to 1.45 V output product: ±15 mV)
150 mV typ. (3.0 V output product, IOUT = 100 mA)
During operation: 1.0 μA typ., 1.5 μA max.
Possible to output 250 mA (3.0 V output product, VIN ≥ VOUT(S) + 1.0 V)*1
A ceramic capacitor of 0.1 μF or more can be used.
Limits overcurrent of output transistor.
Ta = −40°C to +85°C
*1. Attention should be paid to the power dissipation of the package when the output current is large.
*2. Refer to “ Product Name Structure” for details.
Applications
• Constant-voltage power supply for battery-powered device
• Constant-voltage power supply for cellular phone
• Constant-voltage power supply for portable equipment
Packages
• SOT-23-3
• SOT-89-3
• SNT-6A(H)
1
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
Block Diagram
*1
VIN
VOUT
Overcurrent
protection circuit
Reference
−
voltage circuit
+
VSS
*1. Parasitic diode
Figure 1
2
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
Product Name Structure
The output voltage value and package types for the S-1206 Series can be selected at the user’s request. Refer to
“1. Product Name” regarding the contents of product name, “2. Packages” regarding the package drawings and
“3. Product Name List” regarding details of the product name.
1. Product Name
1. 1
SOT-23-3, SOT-89-3
S-1206
B
xx
-
xxxx
x
Environmental code
U:
Lead-free (Sn 100%), halogen-free
G:
Lead-free (for details, please contact our sales office)
Package name (abbreviation) and packing specifications
*1
M3T1 : SOT-23-3, Tape
U3T1 : SOT-89-3, Tape
Output voltage value
12 to 52
(e.g. When output voltage is 1.2 V, it is expressed as 12.)
*1. Refer to the tape drawing.
1. 2
SNT-6A(H)
S-1206
B
xx
-
I6T2
U
Environmental code
U:
Lead-free (Sn 100%), halogen-free
Package name (abbreviation) and packing specifications*1
I6T2 :
SNT-6A(H), Tape
Output voltage value
12 to 52
(e.g. When output voltage is 1.2 V, it is expressed as 12.)
*1. Refer to the tape drawing.
2. Packages
Package Name
SOT-23-3
SOT-89-3
SNT-6A(H)
Package
MP003-C-P-SD
UP003-A-P-SD
PI006-A-P-SD
Drawing Code
Tape
Reel
MP003-C-C-SD
MP003-Z-R-SD
UP003-A-C-SD
UP003-A-R-SD
PI006-A-C-SD
PI006-A-R-SD
Land
−
−
PI006-A-L-SD
3
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
3. Product Name List
Table 1
Output Voltage
1.2 V ±15 mV
1.3 V ±15 mV
1.4 V ±15 mV
1.5 V ±1.0%
1.6 V ±1.0%
1.7 V ±1.0%
1.8 V ±1.0%
1.85 V ±1.0%
1.9 V ±1.0%
2.0 V ±1.0%
2.1 V ±1.0%
2.2 V ±1.0%
2.3 V ±1.0%
2.4 V ±1.0%
2.5 V ±1.0%
2.6 V ±1.0%
2.7 V ±1.0%
2.8 V ±1.0%
2.85 V ±1.0%
2.9 V ±1.0%
3.0 V ±1.0%
3.1 V ±1.0%
3.2 V ±1.0%
3.3 V ±1.0%
3.4 V ±1.0%
3.5 V ±1.0%
3.6 V ±1.0%
3.7 V ±1.0%
3.8 V ±1.0%
3.9 V ±1.0%
4.0 V ±1.0%
4.1 V ±1.0%
4.2 V ±1.0%
4.3 V ±1.0%
4.4 V ±1.0%
4.5 V ±1.0%
4.6 V ±1.0%
4.7 V ±1.0%
4.8 V ±1.0%
4.9 V ±1.0%
5.0 V ±1.0%
5.1 V ±1.0%
5.2 V ±1.0%
SOT-23-3
S-1206B12-M3T1x
S-1206B13-M3T1x
S-1206B14-M3T1x
S-1206B15-M3T1x
S-1206B16-M3T1x
S-1206B17-M3T1x
S-1206B18-M3T1x
S-1206B1J-M3T1x
S-1206B19-M3T1x
S-1206B20-M3T1x
S-1206B21-M3T1x
S-1206B22-M3T1x
S-1206B23-M3T1x
S-1206B24-M3T1x
S-1206B25-M3T1x
S-1206B26-M3T1x
S-1206B27-M3T1x
S-1206B28-M3T1x
S-1206B2J-M3T1x
S-1206B29-M3T1x
S-1206B30-M3T1x
S-1206B31-M3T1x
S-1206B32-M3T1x
S-1206B33-M3T1x
S-1206B34-M3T1x
S-1206B35-M3T1x
S-1206B36-M3T1x
S-1206B37-M3T1x
S-1206B38-M3T1x
S-1206B39-M3T1x
S-1206B40-M3T1x
S-1206B41-M3T1x
S-1206B42-M3T1x
S-1206B43-M3T1x
S-1206B44-M3T1x
S-1206B45-M3T1x
S-1206B46-M3T1x
S-1206B47-M3T1x
S-1206B48-M3T1x
S-1206B49-M3T1x
S-1206B50-M3T1x
S-1206B51-M3T1x
S-1206B52-M3T1x
SOT-89-3
S-1206B12-U3T1x
S-1206B13-U3T1x
S-1206B14-U3T1x
S-1206B15-U3T1x
S-1206B16-U3T1x
S-1206B17-U3T1x
S-1206B18-U3T1x
S-1206B1J-U3T1x
S-1206B19-U3T1x
S-1206B20-U3T1x
S-1206B21-U3T1x
S-1206B22-U3T1x
S-1206B23-U3T1x
S-1206B24-U3T1x
S-1206B25-U3T1x
S-1206B26-U3T1x
S-1206B27-U3T1x
S-1206B28-U3T1x
S-1206B2J-U3T1x
S-1206B29-U3T1x
S-1206B30-U3T1x
S-1206B31-U3T1x
S-1206B32-U3T1x
S-1206B33-U3T1x
S-1206B34-U3T1x
S-1206B35-U3T1x
S-1206B36-U3T1x
S-1206B37-U3T1x
S-1206B38-U3T1x
S-1206B39-U3T1x
S-1206B40-U3T1x
S-1206B41-U3T1x
S-1206B42-U3T1x
S-1206B43-U3T1x
S-1206B44-U3T1x
S-1206B45-U3T1x
S-1206B46-U3T1x
S-1206B47-U3T1x
S-1206B48-U3T1x
S-1206B49-U3T1x
S-1206B50-U3T1x
S-1206B51-U3T1x
S-1206B52-U3T1x
SNT-6A(H)
S-1206B12-I6T2U
S-1206B13-I6T2U
S-1206B14-I6T2U
S-1206B15-I6T2U
S-1206B16-I6T2U
S-1206B17-I6T2U
S-1206B18-I6T2U
S-1206B1J-I6T2U
S-1206B19-I6T2U
S-1206B20-I6T2U
S-1206B21-I6T2U
S-1206B22-I6T2U
S-1206B23-I6T2U
S-1206B24-I6T2U
S-1206B25-I6T2U
S-1206B26-I6T2U
S-1206B27-I6T2U
S-1206B28-I6T2U
S-1206B2J-I6T2U
S-1206B29-I6T2U
S-1206B30-I6T2U
S-1206B31-I6T2U
S-1206B32-I6T2U
S-1206B33-I6T2U
S-1206B34-I6T2U
S-1206B35-I6T2U
S-1206B36-I6T2U
S-1206B37-I6T2U
S-1206B38-I6T2U
S-1206B39-I6T2U
S-1206B40-I6T2U
S-1206B41-I6T2U
S-1206B42-I6T2U
S-1206B43-I6T2U
S-1206B44-I6T2U
S-1206B45-I6T2U
S-1206B46-I6T2U
S-1206B47-I6T2U
S-1206B48-I6T2U
S-1206B49-I6T2U
S-1206B50-I6T2U
S-1206B51-I6T2U
S-1206B52-I6T2U
Remark 1. Please contact our sales office for products with output voltage values other than the above.
2. x: G or U
3. Please select products of environmental code = U for Sn 100%, halogen-free products.
4
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
Pin Configurations
Table 2
SOT-23-3
Top view
1
2
Pin No.
Symbol
1
2
3
VIN
VSS
VOUT
Description
Input voltage pin
GND pin
Output voltage pin
3
Figure 2
Table 3
SOT-89-3
Top view
1
2
Pin No.
1
2
3
Symbol
VSS
VIN
VOUT
Description
GND pin
Input voltage pin
Output voltage pin
3
Figure 3
Table 4
SNT-6A(H)
Top view
Pin No.
1
6
2
5
3
4
Figure 4
Symbol
Description
1
VOUT
Output voltage pin
2
VIN
Input voltage pin
3
VSS
GND pin
*1
NC
4
No connection
5
VIN
Input voltage pin
NC*1
6
No connection
*1. The NC pin is electrically open.
The NC pin can be connected to VIN or VSS.
5
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
Absolute Maximum Ratings
Table 5
Item
Symbol
VIN
VOUT
Input voltage
Output voltage
SOT-23-3
Power dissipation
PD
SOT-89-3
SNT-6A(H)
Operation ambient temperature
Topr
Storage temperature
Tstg
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution
(Ta = 25°C unless otherwise specified)
Absolute Maximum Rating
Unit
VSS − 0.3 to VSS + 7
V
VSS − 0.3 to VIN + 0.3
V
430*1
mW
*1
1000
mW
500*1
mW
−40 to +85
°C
−40 to +125
°C
The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
Power Dissipation (PD) [mW]
1200
SOT-89-3
1000
800
600
6
SOT-23-3
400
200
0
Figure 5
SNT-6A(H)
0
150
100
50
Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
Electrical Characteristics
Table 6
Item
Output
voltage*1
Symbol
VOUT(E)
Output current*2
IOUT
Dropout voltage*3
Vdrop
Line regulation
ΔVOUT1
ΔVIN • VOUT
Conditions
Min.
VOUT(S)
VIN = VOUT(S) + 1.0 V, IOUT = 30 mA,
−15 mV
1.2 V ≤ VOUT(S) < 1.5 V
VOUT(S)
VIN = VOUT(S) + 1.0 V, IOUT = 30 mA,
× 0.99
1.5 V ≤ VOUT(S)
150*5
VIN ≥ VOUT(S) + 1.0 V, 1.2 V ≤ VOUT(S) < 1.5 V
250*5
VIN ≥ VOUT(S) + 1.0 V, 1.5 V ≤ VOUT(S)
0.5
1.2 V ≤ VOUT(S) < 1.3 V
1.3 V ≤ VOUT(S) < 1.4 V
−
1.4 V ≤ VOUT(S) < 1.5 V
−
1.5 V ≤ VOUT(S) < 1.7 V
−
IOUT = 100 mA
1.7 V ≤ VOUT(S) < 1.9 V
−
1.9 V ≤ VOUT(S) < 2.1 V
−
2.1 V ≤ VOUT(S) < 3.0 V
−
3.0 V ≤ VOUT(S) ≤ 5.2 V
−
VOUT(S) + 0.5 V ≤ VIN ≤ 6.5 V IOUT = 1 μA
−
(Ta = 25°C unless otherwise specified)
Test
Typ.
Max.
Unit
Circuit
VOUT(S)
VOUT(S)
V
1
+15 mV
VOUT(S)
VOUT(S)
V
1
× 1.01
mA
3
−
−
mA
3
−
−
0.54
0.81
V
1
0.50
0.73
V
1
0.43
0.66
V
1
0.35
0.53
V
1
0.33
0.50
V
1
0.26
0.43
V
1
0.23
0.36
V
1
0.15
0.23
V
1
0.05
0.2
%/V
1
−
−
0.05
20
0.2
40
%/V
mV
1
1
VIN = VOUT(S) + 1.0 V, IOUT = 30 mA,
−40°C ≤ Ta ≤ 85°C
−
±120
−
ppm/°C
1
ISS1
VIN = VOUT(S) + 1.0 V, no load
−
1.0
1.5
μA
2
VIN
−
VIN = VOUT(S) + 1.0 V, 1.2 V ≤ VOUT < 2.3 V
VOUT = 0 V
2.3 V ≤ VOUT ≤ 5.2 V
1.7
−
−
−
130
100
6.5
−
−
V
mA
mA
−
3
3
ΔVOUT2
Load regulation
Output voltage
temperature
coefficient*4
Current consumption
during operation
Input voltage
Short-circuit current
ISHORT
ΔVOUT
ΔTa • VOUT
IOUT = 30 mA
VIN = VOUT(S) + 1.0 V, 1 μA ≤ IOUT ≤ 100 mA
*1. VOUT(S) : Set output voltage
VOUT(E) : Actual output voltage
Output voltage when fixing IOUT (= 30 mA) and inputting VOUT(S) + 1.0 V
*2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current.
*3. Vdrop = VIN1 − (VOUT3 × 0.98)
VOUT3 is the output voltage when VIN = VOUT(S) + 1.0 V and IOUT = 100 mA.
VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input
voltage.
*4. A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.
ΔVOUT
ΔVOUT
[mV/°C]*1 = VOUT(S) [V]*2 × ΔTa • V
[ppm/°C]*3 ÷ 1000
ΔTa
OUT
*1. Change in temperature of output voltage
*2. Set output voltage
*3. Output voltage temperature coefficient
*5. The output current can be at least this value.
Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the
power dissipation of the package when the output current is large.
This specification is guaranteed by design.
7
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
Test Circuits
1.
VIN
+
VOUT
V
VSS
+
Figure 6
2.
+
A
VIN
VOUT
VSS
Figure 7
3.
VIN
VOUT
VSS
Figure 8
8
+
A
V
+
A
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
Standard Circuit
Input
CIN
VOUT
VIN
*1
Output
CL
*2
VSS
Single GND
GND
*1. A capacitor for stabilizing the input.
*2. A ceramic capacitor of 0.1 μF or more can be used.
Figure 9
Caution
The above connection diagram and constant will not guarantee successful operation. Perform
thorough evaluation using the actual application to set the constant.
Condition of Application
Input capacitor (CIN): 0.1 μF or more
Output capacitor (CL): 0.1 μF or more
Caution
Generally a series regulator may cause oscillation, depending on the selection of external parts.
Confirm that no oscillation occurs in the application for which the above capacitors are used.
Selection of Input and Output Capacitors (CIN, CL)
The S-1206 Series requires an output capacitor between the VOUT pin and VSS pin for phase compensation.
Operation is stabilized by a ceramic capacitor with an output capacitance of 0.1 μF or more in the entire temperature
range. When using an OS capacitor, a tantalum capacitor, or an aluminum electrolytic capacitor, the capacitance must
be 0.1 μF or more.
The value of the output overshoot or undershoot transient response varies depending on the value of the output
capacitor.
The required capacitance of the input capacitor differs depending on the application.
The recommended value for an application is CIN ≥ 0.1 μF, CL ≥ 0.1 μF; however, when selecting these capacitors,
perform sufficient evaluation, including evaluation of temperature characteristics, on the actual device.
9
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
Explanation of Terms
1. Low Dropout Voltage Regulator
This voltage regulator has the low dropout voltage due to its built-in low on-resistance transistor.
2. Low Equivalent Series Resistance
A capacitor whose equivalent series resistance (RESR) is low. The S-1206 Series enables use of a low equivalent
series resistance capacitor, such as a ceramic capacitor, for the output-side capacitor (CL).
3. Output Voltage (VOUT)
The accuracy of the output voltage is ensured at ±1.0% or ±15 mV*2 under the specified conditions of fixed input
voltage*1, fixed output current, and fixed temperature.
*1. Differs depending on the product.
*2. When VOUT < 1.5 V : ±15 mV, When 1.5 V ≤ VOUT : ±1.0%
Caution
If the above conditions change, the output voltage value may vary and exceed the accuracy range
of the output voltage. Refer to the “ Electrical Characteristics” and “ Characteristics (Typical
Data)” for details.
4. Line Regulation
ΔVOUT1
ΔVIN • VOUT
Indicates the dependency of the output voltage on the input voltage. That is, the values show how much the output
voltage changes due to a change in the input voltage with the output current remaining unchanged.
5. Load Regulation (ΔVOUT2)
Indicates the dependency of the output voltage on the output current. That is, the values show how much the output
voltage changes due to a change in the output current with the input voltage remaining unchanged.
6. Dropout Voltage (Vdrop)
Indicates the difference between input voltage (VIN1) and the output voltage when; decreasing input voltage (VIN)
gradually until the output voltage has dropped out to the value of 98% of output voltage (VOUT3), which is at VIN =
VOUT(S) + 1.0 V.
Vdrop = VIN1 − (VOUT3 × 0.98)
10
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
7. Output Voltage Temperature Coefficient
ΔVOUT
ΔTa • VOUT
The shaded area in Figure 10 is the range where VOUT varies in the operation temperature range when the output
voltage temperature coefficient is ±120 ppm/°C.
Example of S-1206B30 typ. product
VOUT [V]
+0.36 mV/°C
VOUT(E)
*1
−0.36 mV/°C
−40
+25
+85
Ta [°C]
*1. VOUT(E) is the value of the output voltage measured at Ta = +25°C.
Figure 10
A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.
ΔVOUT
ΔVOUT
[mV/°C]*1 = VOUT(S) [V]*2 × ΔTa • V
[ppm/°C]*3 ÷ 1000
ΔTa
OUT
*1. Change in temperature of output voltage
*2. Set output voltage
*3. Output voltage temperature coefficient
11
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
Operation
1. Basic Operation
Figure 11 shows the block diagram of the S-1206 Series.
The error amplifier compares the reference voltage (Vref) with feedback voltage (Vfb), which is the output voltage
resistance-divided by feedback resistors (Rs and Rf). It supplies the gate voltage necessary to maintain the constant
output voltage which is not influenced by the input voltage and temperature change, to the output transistor.
VIN
*1
Current
supply
Error
amplifier
Vref
VOUT
−
Rf
+
Vfb
Reference voltage
circuit
Rs
VSS
*1. Parasitic diode
Figure 11
2. Output Transistor
In the S-1206 Series, a low on-resistance P-channel MOS FET is used as the output transistor.
Be sure that VOUT does not exceed VIN + 0.3 V to prevent the voltage regulator from being damaged due to reverse
current flowing from the VOUT pin through a parasitic diode to the VIN pin, when the potential of VOUT became higher
than VIN.
3. Overcurrent Protection Circuit
The S-1206 Series includes an overcurrent protection circuit having the characteristics shown in “1. Output Voltage
vs. Output Current (Ta = 25°C)” in “ Characteristics (Typical Data)”, in order to protect the output transistor
against an excessive output current and short circuiting between the VOUT and VSS pins. The current when the
output pin is short-circuited (ISHORT) is internally set at approx. 130 mA (typ.) (1.2 V ≤ VOUT < 2.3 V) or approx. 100 mA
(typ.)
(2.3 V ≤ VOUT ≤ 5.2 V), and the normal value is restored for the output voltage, if releasing a short circuit
once.
Caution This overcurrent protection circuit does not work as for thermal protection. If this IC long keeps
short circuiting inside, pay attention to the conditions of input voltage and load current so that,
under the usage conditions including short circuit, the loss of the IC will not exceed power
dissipation of the package.
12
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
Precautions
• Wiring patterns for the VIN pin, the VOUT pin and GND should be designed so that the impedance is low. When
mounting an output capacitor between the VOUT pin and the VSS pin (CL) and a capacitor for stabilizing the input
between the VIN pin and the VSS pin (CIN), the distance from the capacitors to these pins should be as short as
possible.
• Note that generally the output voltage may increase when a series regulator is used at low load current (10 μA or less).
• Note that generally the output voltage may increase due to the leakage current from an output driver when a series
regulator is used at high temperature.
• Generally a series regulator may cause oscillation, depending on the selection of external parts. The following
conditions are recommended for the S-1206 Series. However, be sure to perform sufficient evaluation under the
actual usage conditions for selection, including evaluation of temperature characteristics. Refer to “5. Equivalent
Series Resistance vs. Output Current Characteristics Example (Ta = 25°C)” in “ Reference Data” for the
equivalent series resistance (RESR) of the output capacitor.
Input capacitor (CIN):
Output capacitor (CL):
0.1 μF or more
0.1 μF or more
Use an I/O capacitor with good temperature characteristics (conforming to the ceramic capacitor EIA X5R (JIS B)
characteristics).
• The voltage regulator may oscillate when the impedance of the power supply is high and the input capacitance is small
or an input capacitor is not connected.
• If the output capacitance is small, power supply's fluctuation and the characteristics of load fluctuation become worse.
Sufficiently evaluate the output voltage's fluctuation with the actual device.
• Overshoot may occur in the output voltage momentarily if the voltage is rapidly raised at power-on or when the power
supply fluctuates. Sufficiently evaluate the output voltage at power-on with the actual device.
• The application conditions for the input voltage, the output voltage, and the load current should not exceed the package
power dissipation.
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
• In determining the output current, attention should be paid to the output current value specified in Table 6 in “
Electrical Characteristics” and footnote *5 of the table.
• SII Semiconductor Corporation claims no responsibility for any disputes arising out of or in connection with any
infringement by products including this IC of patents owned by a third party.
13
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
Characteristics (Typical Data)
1. Output Voltage vs. Output Current (Ta = 25°C)
VOUT [V]
VIN = 2.2 V
3.2 V
6.5 V
0
1.5 V
1.7 V
0
S-1206B30
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
200 300 400 500 600 700
IOUT [mA]
100
3.3 V
4.0 V
VOUT [V]
S-1206B12
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
100
VIN = 3.5 V
5.0 V
6.5 V
200 300 400 500 600 700
IOUT [mA]
S-1206B50
6
VIN = 5.5 V
VOUT [V]
5
6.0 V
4
5.3 V
3
6.5 V
2
1
0
0
Remark In determining the output current, attention should
be paid to the following.
1. Minimum output current value specified in
Table 6 and footnote *5 in “ Electrical
Characteristics”
2. Power dissipation of package
200 300 400 500 600 700
IOUT [mA]
100
2. Output Voltage vs. Input Voltage (Ta = 25°C)
VOUT [V]
1.20
S-1206B30
3.1
IOUT = 1 A
3.0
1.15
10 A
1 mA
30 mA
50 mA
100 mA
1.10
1.05
1.00
1.0
S-1206B50
5.1
VOUT [V]
5.0
1.5
2.0
2.5
VIN [V]
4.9
3.0
3.5
10 A
1 mA
30 mA
50 mA
100 mA
4.8
4.7
4.5
4.5
5.0
5.5
VIN [V]
IOUT = 1 A
2.9
10 A
1 mA
30 mA
50 mA
100 mA
2.8
2.7
2.6
IOUT = 1 A
4.6
14
VOUT [V]
S-1206B12
1.25
6.0
6.5
2.5
2.5
3.0
3.5
4.0
VIN [V]
4.5
5.0
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
3. Dropout Voltage vs. Output Current
S-1206B30
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
0
S-1206B50
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
50
Ta = 85C
25C
40C
Vdrop [V]
Ta = 85C
25C
40C
Vdrop [V]
S-1206B12
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0
100
IOUT [mA]
150
200
0
50
100
150 200
IOUT [mA]
250
300
Vdrop [V]
Ta = 85C
25C
40C
0
50
100
150 200
IOUT [mA]
250
300
Vdrop [V]
4. Dropout Voltage vs. Set Output Voltage
0.80
0.70 150 mA
0.60
100 mA
0.50
0.40 50 mA
0.30
30 mA
0.20
0.10 10 mA
0
0
1
IOUT = 250 mA
2
3
4
VOUT(S) [V]
5
6
15
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
5. Output Voltage vs. Ambient Temperature
0
25
Ta [C]
50
75 85
S-1206B50
5.10
5.08
5.06
5.04
5.02
5.00
4.98
4.96
4.94
4.92
4.90
40 25
0
25
Ta [C]
50
75 85
S-1206B30
3.10
3.08
3.06
3.04
3.02
3.00
2.98
2.96
2.94
2.92
2.90
40 25
0
75 85
50
25
Ta [C]
VOUT [V]
VOUT [V]
VOUT [V]
S-1206B12
1.30
1.28
1.26
1.24
1.22
1.20
1.18
1.16
1.14
1.12
1.10
40 25
6. Current Consumption vs. Input Voltage
S-1206B12
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
25C
40C
S-1206B50
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
1
2
3
4
VIN [V]
5
6
7
5
6
7
ISS1 [A]
Ta = 85C
25C
40C
0
1
2
4
3
VIN [V]
Ta = 85C
ISS1 [A]
ISS1 [A]
Ta = 85C
0
16
S-1206B30
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
25C
40C
0
1
2
3
4
VIN [V]
5
6
7
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
7. Current Consumption vs. Ambient Temperature
S-1206B12
1.4
1.2
1.0
0.8
0.6
0.4
0.2
6.5 V
0
25
Ta [C]
VIN = 4.0 V
6.5 V
ISS1 [A]
VIN = 2.2 V
ISS1 [A]
0
40 25
S-1206B30
1.4
1.2
1.0
0.8
0.6
0.4
0.2
50
75 85
0
40 25
0
25
Ta [C]
50
75 85
ISS1 [A]
S-1206B50
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
40 25
VIN = 6.0 V
6.5 V
0
25
Ta [C]
50
75 85
17
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
Reference Data
1. Input Transient Response Characteristics (Ta = 25°C)
18
VIN [V]
VOUT [V]
VIN [V]
IOUT = 100 mA, tr = tf = 5.0 μs
5.6
5.5 VIN
5.4
5.3
CIN = CL = 0.1 F
5.2
CIN = CL = 1.0 F
5.1 VOUT
7.0
6.5
6.0
5.5
5.0
4.5
4.0
5.0
3.5
4.9
3.0
4.8
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
VIN [V]
VOUT [V]
S-1206B50
IOUT = 1 mA, tr = tf = 5.0 μs
7.0
5.6
6.5
5.5 VIN
6.0
5.4
5.5
5.3
CIN = CL = 0.1 F
5.2
5.0
CIN = CL = 1.0 F
5.1 VOUT
4.5
4.0
5.0
3.5
4.9
3.0
4.8
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
VIN [V]
t [ms]
IOUT = 100 mA, tr = tf = 5.0 μs
6.0
4.2
5.0
4.0 VIN
4.0
3.8
3.0
3.6
CIN = CL = 0.1 F
3.4
2.0
CIN = CL = 1.0 F
3.2 VOUT
1.0
3.0
0
1.0
2.8
2.0
2.6
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
VOUT [V]
VIN [V]
VOUT [V]
S-1206B30
IOUT = 1 mA, tr = tf = 5.0 μs
6.0
4.2
5.0
4.0 VIN
4.0
3.8
3.0
3.6
CIN = CL = 0.1 F
3.4
2.0
CIN = CL = 1.0 F
3.2 VOUT
1.0
3.0
0
1.0
2.8
2.0
2.6
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
IOUT = 100 mA, tr = tf = 5.0 μs
1.8
3.5
3.0
1.7
2.5
1.6 VIN
2.0
1.5
CIN = CL = 0.1 F
1.5
1.4
CIN = CL = 1.0 F
1.0
1.3 VOUT
0.5
1.2
1.1
0
0.5
1.0
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
VOUT [V]
VIN [V]
VOUT [V]
S-1206B12
IOUT = 1 mA, tr = tf = 5.0 μs
1.8
3.5
3.0
1.7
2.5
1.6 VIN
2.0
1.5
1.5
CIN = CL = 0.1 F
1.4
1.0
1.3 VOUT
CIN = CL = 1.0 F
0.5
1.2
1.1
0
0.5
1.0
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
2. Load Transient Response Characteristics (Ta = 25°C)
S-1206B12
VIN = 2.2 V, IOUT = 1 mA ↔ 40 mA
2.8
0.8
2.0
CIN = CL = 1.0 F
VOUT
2.6
40
4.2
1
3.8
CIN = CL = 1.0 F
4.6
VOUT
CIN = CL = 1.0 F
CIN = CL = 0.1 F
4.2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
40
6.2
1
5.8
VOUT [V]
5.0
VOUT
CIN = CL = 1.0 F
VIN = 6.0 V, IOUT = 50 mA ↔ 100 mA
6.6
IOUT [mA]
VOUT [V]
5.4
IOUT
3.0
50
CIN = CL = 0.1 F
2.2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
S-1206B50
VIN = 6.0 V, IOUT = 1 mA ↔ 40 mA
6.6
5.8
3.4
100
IOUT
2.6
CIN = CL = 0.1 F
2.2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
6.2
CIN = CL = 0.1 F
VIN = 4.0 V, IOUT = 50 mA ↔ 100 mA
4.6
VOUT [V]
3.0
CIN = CL = 1.0 F
t [ms]
IOUT [mA]
VOUT [V]
3.4
IOUT
VOUT
50
0.4
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
S-1206B30
VIN = 4.0 V, IOUT = 1 mA ↔ 40 mA
4.6
3.8
1.2
0.8
CIN = CL = 0.1 F
0.4
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
4.2
1.6
100
IOUT
IOUT [mA]
VOUT
2.4
1
IOUT [mA]
1.2
40
5.4
5.0
100
IOUT
VOUT
50
CIN = CL = 1.0 F
IOUT [mA]
1.6
IOUT
VOUT [V]
2.0
IOUT [mA]
VOUT [V]
2.4
VIN = 2.2 V, IOUT = 50 mA ↔ 100 mA
2.8
4.6
CIN = CL = 0.1 F
4.2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
19
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
3. Input Voltage Transient Response Characteristics (Ta = 25°C)
0
1.5
VOUT
CIN = CL = 1.0 F
4
6
2
0.5
VOUT
CIN = CL = 0.1 F
CIN = CL = 1.0 F
4
6
8
0.5
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
VIN = 4.0 V, IOUT = 100 mA
10
6
6
8
4
8
4
6
2
6
2
4
2
0
VIN
VOUT
CIN = CL = 1.0 F
0
2
CIN = CL = 0.1 F
4
VIN [V]
VOUT [V]
S-1206B30
VIN = 4.0 V, IOUT = 1 mA
10
0
1.0
0
8
0.5
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
2
VIN
4
2
0
VIN
VOUT
CIN = CL = 1.0 F
CIN = CL = 0.1 F
0
2
4
VIN = 6.0 V, IOUT = 100 mA
14
8
12
6
10
4
8 VIN
2
6
0
2
4
4
2 VOUT
CIN = CL = 1.0 F
6
0
CIN = CL = 0.1 F
8
2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
VOUT [V]
S-1206B50
VIN = 6.0 V, IOUT = 1 mA
14
8
12
6
10
4
8 VIN
2
6
0
2
4
CIN = CL = 1.0 F
4
2 VOUT
6
CIN = CL = 0.1 F
0
8
2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
VIN [V]
6
2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
VOUT [V]
6
2
0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
20
VIN [V]
2.0
2
1.0
0.5
2
0
VIN [V]
CIN = CL = 0.1 F
4
VIN [V]
VIN
VOUT [V]
1.5
VOUT [V]
VOUT [V]
2.0
VIN = 2.2 V, IOUT = 100 mA
2.5
4
VIN [V]
S-1206B12
VIN = 2.2 V, IOUT = 1 mA
2.5
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
4. Ripple Rejection (Ta = 25°C)
S-1206B12
S-1206B30
100
80
IOUT = 30 mA
60
40
20
0
10
100
1k
10k
Frequency [Hz]
VIN = 4.0 V, CL = 0.1 μF
Ripple Rejection [dB]
Ripple Rejection [dB]
VIN = 2.2 V, CL = 0.1 μF
100k
1M
100
80
IOUT = 30 mA
60
40
20
0
10
100
1k
10k
Frequency [Hz]
100k
1M
S-1206B50
Ripple Rejection [dB]
VIN = 6.0 V, CL = 0.1 μF
100
80
IOUT = 30 mA
60
40
20
0
10
100
1k
10k
Frequency [Hz]
100k
1M
5. Equivalent Series Resistance vs. Output Current Characteristics Example (Ta = 25°C)
CL :
Murata Manufacturing Co., Ltd.
GRM115R71C104K (0.1 μF)
CIN = CL = 0.1 μF
100
RESR [Ω]
VIN
CIN
Stable
S-1206 Series
CL
0
0.001
250
VSS
RESR
IOUT [mA]
21
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
Marking Specifications
1. SOT-23-3
Top view
(1) to (3) :
(4) :
1
Product abbreviation (refer to Product Name vs. Product Code)
Lot number
(1) (2) (3) (4)
2
3
Product Name vs. Product Code
Product Name
S-1206B12-M3T1x
S-1206B13-M3T1x
S-1206B14-M3T1x
S-1206B15-M3T1x
S-1206B16-M3T1x
S-1206B17-M3T1x
S-1206B18-M3T1x
S-1206B1J-M3T1x
S-1206B19-M3T1x
S-1206B20-M3T1x
S-1206B21-M3T1x
S-1206B22-M3T1x
S-1206B23-M3T1x
S-1206B24-M3T1x
S-1206B25-M3T1x
S-1206B26-M3T1x
S-1206B27-M3T1x
S-1206B28-M3T1x
S-1206B2J-M3T1x
S-1206B29-M3T1x
S-1206B30-M3T1x
S-1206B31-M3T1x
Product Code
(1)
(2)
(3)
S
A
A
S
A
B
S
A
C
S
A
D
S
A
E
S
A
F
S
A
G
S
A
H
S
A
I
S
A
J
S
A
K
S
A
L
S
A
M
S
A
N
S
A
O
S
A
P
S
A
Q
S
A
R
S
A
S
S
A
T
S
A
U
S
A
V
Product Name
S-1206B32-M3T1x
S-1206B33-M3T1x
S-1206B34-M3T1x
S-1206B35-M3T1x
S-1206B36-M3T1x
S-1206B37-M3T1x
S-1206B38-M3T1x
S-1206B39-M3T1x
S-1206B40-M3T1x
S-1206B41-M3T1x
S-1206B42-M3T1x
S-1206B43-M3T1x
S-1206B44-M3T1x
S-1206B45-M3T1x
S-1206B46-M3T1x
S-1206B47-M3T1x
S-1206B48-M3T1x
S-1206B49-M3T1x
S-1206B50-M3T1x
S-1206B51-M3T1x
S-1206B52-M3T1x
Product Code
(1)
(2)
(3)
S
A
W
S
A
X
S
A
Y
S
A
Z
S
B
A
S
B
B
S
B
C
S
B
D
S
B
E
S
B
F
S
B
G
S
B
H
S
B
I
S
B
J
S
B
K
S
B
L
S
B
M
S
B
N
S
B
O
S
B
P
S
B
Q
Remark 1. x: G or U
2. Please select products of environmental code = U for Sn 100%, halogen-free products.
22
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
2. SOT-89-3
1
(1) to (3) :
(4) to (6) :
(4) (5) (6)
(1) (2) (3)
Top view
2
Product abbreviation (refer to Product Name vs. Product Code)
Lot number
3
Product Name vs. Product Code
Product Name
S-1206B12-U3T1x
S-1206B13-U3T1x
S-1206B14-U3T1x
S-1206B15-U3T1x
S-1206B16-U3T1x
S-1206B17-U3T1x
S-1206B18-U3T1x
S-1206B1J-U3T1x
S-1206B19-U3T1x
S-1206B20-U3T1x
S-1206B21-U3T1x
S-1206B22-U3T1x
S-1206B23-U3T1x
S-1206B24-U3T1x
S-1206B25-U3T1x
S-1206B26-U3T1x
S-1206B27-U3T1x
S-1206B28-U3T1x
S-1206B2J-U3T1x
S-1206B29-U3T1x
S-1206B30-U3T1x
S-1206B31-U3T1x
Product Code
(1)
(2)
(3)
S
A
A
S
A
B
S
A
C
S
A
D
S
A
E
S
A
F
S
A
G
S
A
H
S
A
I
S
A
J
S
A
K
S
A
L
S
A
M
S
A
N
S
A
O
S
A
P
S
A
Q
S
A
R
S
A
S
S
A
T
S
A
U
S
A
V
Product Name
S-1206B32-U3T1x
S-1206B33-U3T1x
S-1206B34-U3T1x
S-1206B35-U3T1x
S-1206B36-U3T1x
S-1206B37-U3T1x
S-1206B38-U3T1x
S-1206B39-U3T1x
S-1206B40-U3T1x
S-1206B41-U3T1x
S-1206B42-U3T1x
S-1206B43-U3T1x
S-1206B44-U3T1x
S-1206B45-U3T1x
S-1206B46-U3T1x
S-1206B47-U3T1x
S-1206B48-U3T1x
S-1206B49-U3T1x
S-1206B50-U3T1x
S-1206B51-U3T1x
S-1206B52-U3T1x
Product Code
(1)
(2)
(3)
S
A
W
S
A
X
S
A
Y
S
A
Z
S
B
A
S
B
B
S
B
C
S
B
D
S
B
E
S
B
F
S
B
G
S
B
H
S
B
I
S
B
J
S
B
K
S
B
L
S
B
M
S
B
N
S
B
O
S
B
P
S
B
Q
Remark 1. x: G or U
2. Please select products of environmental code = U for Sn 100%, halogen-free products.
23
ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR
Rev.3.2_01
S-1206 Series
3. SNT-6A(H)
Top view
6
5
4
(1) to (3) :
(4) to (6) :
Product abbreviation (refer to Product Name vs. Product Code)
Lot number
(1) (2) (3)
(4) (5) (6)
1
2
3
Product Name vs. Product Code
Product Name
S-1206B12-I6T2U
S-1206B13-I6T2U
S-1206B14-I6T2U
S-1206B15-I6T2U
S-1206B16-I6T2U
S-1206B17-I6T2U
S-1206B18-I6T2U
S-1206B1J-I6T2U
S-1206B19-I6T2U
S-1206B20-I6T2U
S-1206B21-I6T2U
S-1206B22-I6T2U
S-1206B23-I6T2U
S-1206B24-I6T2U
S-1206B25-I6T2U
S-1206B26-I6T2U
S-1206B27-I6T2U
S-1206B28-I6T2U
S-1206B2J-I6T2U
S-1206B29-I6T2U
S-1206B30-I6T2U
S-1206B31-I6T2U
24
Product Code
(1)
(2)
(3)
S
A
A
S
A
B
S
A
C
S
A
D
S
A
E
S
A
F
S
A
G
S
A
H
S
A
I
S
A
J
S
A
K
S
A
L
S
A
M
S
A
N
S
A
O
S
A
P
S
A
Q
S
A
R
S
A
S
S
A
T
S
A
U
S
A
V
Product Name
S-1206B32-I6T2U
S-1206B33-I6T2U
S-1206B34-I6T2U
S-1206B35-I6T2U
S-1206B36-I6T2U
S-1206B37-I6T2U
S-1206B38-I6T2U
S-1206B39-I6T2U
S-1206B40-I6T2U
S-1206B41-I6T2U
S-1206B42-I6T2U
S-1206B43-I6T2U
S-1206B44-I6T2U
S-1206B45-I6T2U
S-1206B46-I6T2U
S-1206B47-I6T2U
S-1206B48-I6T2U
S-1206B49-I6T2U
S-1206B50-I6T2U
S-1206B51-I6T2U
S-1206B52-I6T2U
Product Code
(1)
(2)
(3)
S
A
W
S
A
X
S
A
Y
S
A
Z
S
B
A
S
B
B
S
B
C
S
B
D
S
B
E
S
B
F
S
B
G
S
B
H
S
B
I
S
B
J
S
B
K
S
B
L
S
B
M
S
B
N
S
B
O
S
B
P
S
B
Q
2.9±0.2
1
2
3
0.16 +0.1
-0.06
0.95±0.1
1.9±0.2
0.4±0.1
No. MP003-C-P-SD-1.0
TITLE
SOT233-C-PKG Dimensions
No.
MP003-C-P-SD-1.0
SCALE
UNIT
mm
SII Semiconductor Corporation
+0.1
ø1.5 -0
4.0±0.1
2.0±0.1
+0.25
ø1.0 -0
0.23±0.1
4.0±0.1
1.4±0.2
3.2±0.2
1
2
3
Feed direction
No. MP003-C-C-SD-2.0
TITLE
SOT233-C-Carrier Tape
No.
MP003-C-C-SD-2.0
SCALE
UNIT
mm
SII Semiconductor Corporation
12.5max.
9.2±0.5
Enlarged drawing in the central part
ø13±0.2
No. MP003-Z-R-SD-1.0
SOT233-C-Reel
TITLE
No.
MP003-Z-R-SD-1.0
SCALE
UNIT
QTY.
3,000
mm
SII Semiconductor Corporation
4.5±0.1
1.5±0.1
1.6±0.2
1
2
3
1.5±0.1 1.5±0.1
0.4±0.05
45°
0.4±0.1
0.4±0.1
0.45±0.1
No. UP003-A-P-SD-1.1
TITLE
SOT893-A-PKG Dimensions
No.
UP003-A-P-SD-1.1
SCALE
UNIT
mm
SII Semiconductor Corporation
+0.1
ø1.5 -0
4.0±0.1(10 pitches : 40.0±0.2)
2.0±0.05
ø1.5 +0.1
-0
5° max.
0.3±0.05
8.0±0.1
2.0±0.1
4.75±0.1
Feed direction
No. UP003-A-C-SD-1.1
TITLE
SOT893-A-Carrier Tape
No.
UP003-A-C-SD-1.1
SCALE
UNIT
mm
SII Semiconductor Corporation
16.5max.
13.0±0.3
Enlarged drawing in the central part
(60°)
(60°)
No. UP003-A-R-SD-1.1
TITLE
SOT893-A-Reel
No.
UP003-A-R-SD-1.1
SCALE
QTY.
UNIT
1,000
mm
SII Semiconductor Corporation
1.57±0.03
6
5
1
2
4
+0.05
0.08 -0.02
3
0.5
0.48±0.02
0.2±0.05
No. PI006-A-P-SD-2.0
TITLE
SNT-6A(H)-A-PKG Dimensions
No.
PI006-A-P-SD-2.0
SCALE
UNIT
mm
SII Semiconductor Corporation
+0.1
ø1.5 -0
4.0±0.1
2.0±0.05
0.25±0.05
+0.1
1.85±0.05
5°
ø0.5 -0
4.0±0.1
0.65±0.05
3 2 1
4
5 6
Feed direction
No. PI006-A-C-SD-1.0
TITLE
SNT-6A(H)-A-Carrier Tape
No.
PI006-A-C-SD-1.0
SCALE
UNIT
mm
SII Semiconductor Corporation
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. PI006-A-R-SD-1.0
TITLE
SNT-6A(H)-A-Reel
No.
PI006-A-R-SD-1.0
SCALE
UNIT
QTY.
5,000
mm
SII Semiconductor Corporation
0.52
1.36
2
0.52
0.2 0.3
1.
2.
1
(0.25 mm min. / 0.30 mm typ.)
(1.30 mm ~ 1.40 mm)
1.
2.
3.
4.
0.03 mm
SNT
1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.).
2. Do not widen the land pattern to the center of the package (1.30 mm to 1.40 mm).
Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package.
2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm
or less from the land pattern surface.
3. Match the mask aperture size and aperture position with the land pattern.
4. Refer to "SNT Package User's Guide" for details.
1.
2.
(0.25 mm min. / 0.30 mm typ.)
(1.30 mm ~ 1.40 mm)
No. PI006-A-L-SD-4.1
TITLE
SNT-6A(H)-A
-Land Recommendation
No.
PI006-A-L-SD-4.1
SCALE
UNIT
mm
SII Semiconductor Corporation
Disclaimers (Handling Precautions)
1.
All the information described herein (product data, specifications, figures, tables, programs, algorithms and
application circuit examples, etc.) is current as of publishing date of this document and is subject to change without
notice.
2.
The circuit examples and the usages described herein are for reference only, and do not guarantee the success of
any specific mass-production design.
SII Semiconductor Corporation is not responsible for damages caused by the reasons other than the products or
infringement of third-party intellectual property rights and any other rights due to the use of the information described
herein.
3.
SII Semiconductor Corporation is not responsible for damages caused by the incorrect information described herein.
4.
Take care to use the products described herein within their specified ranges. Pay special attention to the absolute
maximum ratings, operation voltage range and electrical characteristics, etc.
SII Semiconductor Corporation is not responsible for damages caused by failures and/or accidents, etc. that occur
due to the use of products outside their specified ranges.
5.
When using the products described herein, confirm their applications, and the laws and regulations of the region or
country where they are used and verify suitability, safety and other factors for the intended use.
6.
When exporting the products described herein, comply with the Foreign Exchange and Foreign Trade Act and all
other export-related laws, and follow the required procedures.
7.
The products described herein must not be used or provided (exported) for the purposes of the development of
weapons of mass destruction or military use. SII Semiconductor Corporation is not responsible for any provision
(export) to those whose purpose is to develop, manufacture, use or store nuclear, biological or chemical weapons,
missiles, or other military use.
8.
The products described herein are not designed to be used as part of any device or equipment that may affect the
human body, human life, or assets (such as medical equipment, disaster prevention systems, security systems,
combustion control systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment,
aviation equipment, aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle
use or other uses. Do not use those products without the prior written permission of SII Semiconductor Corporation.
Especially, the products described herein cannot be used for life support devices, devices implanted in the human
body and devices that directly affect human life, etc.
Prior consultation with our sales office is required when considering the above uses.
SII Semiconductor Corporation is not responsible for damages caused by unauthorized or unspecified use of our
products.
9.
Semiconductor products may fail or malfunction with some probability.
The user of these products should therefore take responsibility to give thorough consideration to safety design
including redundancy, fire spread prevention measures, and malfunction prevention to prevent accidents causing
injury or death, fires and social damage, etc. that may ensue from the products' failure or malfunction.
The entire system must be sufficiently evaluated and applied on customer's own responsibility.
10. The products described herein are not designed to be radiation-proof. The necessary radiation measures should be
taken in the product design by the customer depending on the intended use.
11. The products described herein do not affect human health under normal use. However, they contain chemical
substances and heavy metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips
may be sharp. Take care when handling these with the bare hands to prevent injuries, etc.
12. When disposing of the products described herein, comply with the laws and ordinances of the country or region where
they are used.
13. The information described herein contains copyright information and know-how of SII Semiconductor Corporation.
The information described herein does not convey any license under any intellectual property rights or any other
rights belonging to SII Semiconductor Corporation or a third party. Reproduction or copying of the information
described herein for the purpose of disclosing it to a third-party without the express permission of SII Semiconductor
Corporation is strictly prohibited.
14. For more details on the information described herein, contact our sales office.
1.0-2016.01
www.sii-ic.com
工商网监
湘ICP备2023018690号
