S-1313 Series
www.ablic.com
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
Rev.2.2_00
© ABLIC Inc., 2011-2019
The S-1313 Series, developed by using the CMOS technology, is a positive voltage regulator IC which has the super low
current consumption and the low dropout voltage.
Current consumption is as low as 0.9 μA typ., and a ceramic capacitor of 0.1 μF or more can be used as the input and output
capacitors.
It also has high-accuracy output voltage of ±1.0%.
Features
• Output voltage:
• Input voltage:
• Output voltage accuracy:
• Dropout voltage:
• Current consumption:
• Output current:
• Input and output capacitors:
• Built-in overcurrent protection circuit:
• Built-in thermal shutdown circuit:
• Built-in ON / OFF circuit:
• Operation temperature range:
• Lead-free (Sn 100%), halogen-free
1.0 V to 3.5 V, selectable in 0.05 V step.
1.5 V to 5.5 V
±1.0% (1.0 V to 1.45 V output product: ±15 mV)
170 mV typ. (2.8 V output product, IOUT = 100 mA)
During operation:
0.9 μA typ., 1.35 μA max.
During power-off:
0.01 μA typ., 0.1 μA max.
Possible to output 200 mA (VOUT(S) ≥ 1.4 V, VIN ≥ VOUT(S) + 1.0 V)*1
A ceramic capacitor of 0.1 μF or more can be used.
Limits overcurrent of output transistor.
Prevents damage caused by heat.
Ensures long battery life.
Discharge shunt function "available" / "unavailable" is selectable.
Pull-down function "available" / "unavailable" is selectable.
Ta = −40°C to +85°C
*1. Attention should be paid to the power dissipation of the package when the output current is large.
Applications
• Constant-voltage power supply for portable communication device, digital camera, and digital audio player
• Constant-voltage power supply for battery-powered device
• Constant-voltage power supply for home electric appliance
Packages
• SOT-23-5
• SC-82AB
• HSNT-4 (1010)
• HSNT-4 (0808)
1
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Block Diagrams
1.
S-1313 Series A type
*1
VIN
VOUT
Overcurrent
protection circuit
Function
ON / OFF logic
Discharge shunt
function
Constant current
source pull-down
Status
Active "H"
Function
ON / OFF logic
Discharge shunt
function
Constant current
source pull-down
Status
Active "H"
Available
Available
Thermal shutdown circuit
ON / OFF
ON / OFF circuit
+
−
Reference
voltage circuit
*1
VSS
*1.
Parasitic diode
Figure 1
2.
S-1313 Series B type
*1
VIN
VOUT
Overcurrent
protection circuit
Thermal shutdown circuit
ON / OFF
ON / OFF circuit
+
−
Reference
voltage circuit
*1
VSS
*1.
Parasitic diode
Figure 2
2
Available
Unavailable
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
3.
S-1313 Series C type
*1
VIN
VOUT
Overcurrent
protection circuit
Function
ON / OFF logic
Discharge shunt
function
Constant current
source pull-down
Status
Active "H"
Function
ON / OFF logic
Discharge shunt
function
Constant current
source pull-down
Status
Active "H"
Unavailable
Available
Thermal shutdown circuit
ON / OFF
ON / OFF circuit
+
−
Reference
voltage circuit
VSS
*1.
Parasitic diode
Figure 3
4.
S-1313 Series D type
*1
VIN
VOUT
Overcurrent
protection circuit
Unavailable
Unavailable
Thermal shutdown circuit
ON / OFF
ON / OFF circuit
+
−
Reference
voltage circuit
VSS
*1.
Parasitic diode
Figure 4
3
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Product Name Structure
Users can select the product type, output voltage, and package type for the S-1313 Series. Refer to "1. Product
name" regarding the contents of product name, "2. Function list of product type" regarding the product type,
"3. Packages" regarding the package drawings, "4. Product name list" regarding details of the product name.
1.
Product name
S-1313
x
xx
-
xxxx
U
3
Environmental code
U:
Lead-free (Sn 100%), halogen-free
Package abbreviation and IC packing specifications*1
M5T1: SOT-23-5, Tape
N4T1: SC-82AB, Tape
A4T2: HSNT-4 (1010), Tape
A4T1: HSNT-4 (0808), Tape
Output voltage*2
10 to 35
(e.g., when the output voltage is 1.0 V, it is expressed as 10.)
*3
Product type
A to D
*1.
*2.
*3.
2.
Refer to the tape drawing.
If you request the product which has 0.05 V step, contact our sales office.
Refer to "2. Function list of product type".
Function list of product type
Table 1
Product Type
A
3.
ON / OFF Logic
Active "H"
Discharge Shunt Function Constant Current Source Pull-down
Available
Available
B
Active "H"
Available
Unavailable
C
D
Active "H"
Active "H"
Unavailable
Unavailable
Available
Unavailable
Packages
Table 2
Package Name
4
Package Drawing Codes
Dimension
Tape
Reel
Land
SOT-23-5
MP005-A-P-SD
MP005-A-R-SD
−
SC-82AB
NP004-A-P-SD
NP004-A-R-SD
−
HSNT-4 (1010)
HSNT-4 (0808)
PL004-A-P-SD
PK004-A-P-SD
MP005-A-C-SD
NP004-A-C-SD
NP004-A-C-S1
PL004-A-C-SD
PK004-A-C-SD
PL004-A-R-SD
PK004-A-R-SD
PL004-A-L-SD
PK004-A-L-SD
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
4.
Product name list
4. 1
S-1313 Series A type
ON / OFF logic:
Discharge shunt function:
Active "H"
Available
Constant current source pull-down: Available
Table 3
Output Voltage
1.0 V ± 15 mV
1.1 V ± 15 mV
1.2 V ± 15 mV
1.3 V ± 15 mV
1.4 V ± 15 mV
1.5 V ± 1.0%
1.6 V ± 1.0%
1.7 V ± 1.0%
1.8 V ± 1.0%
1.85 V ± 1.0%
1.9 V ± 1.0%
2.0 V ± 1.0%
2.1 V ± 1.0%
2.2 V ± 1.0%
2.3 V ± 1.0%
2.4 V ± 1.0%
2.5 V ± 1.0%
2.6 V ± 1.0%
2.7 V ± 1.0%
2.8 V ± 1.0%
2.85 V ± 1.0%
2.9 V ± 1.0%
3.0 V ± 1.0%
3.1 V ± 1.0%
3.2 V ± 1.0%
3.3 V ± 1.0%
3.4 V ± 1.0%
3.5 V ± 1.0%
Remark
SOT-23-5
S-1313A10-M5T1U3
S-1313A11-M5T1U3
S-1313A12-M5T1U3
S-1313A13-M5T1U3
S-1313A14-M5T1U3
S-1313A15-M5T1U3
S-1313A16-M5T1U3
S-1313A17-M5T1U3
S-1313A18-M5T1U3
S-1313A1J-M5T1U3
S-1313A19-M5T1U3
S-1313A20-M5T1U3
S-1313A21-M5T1U3
S-1313A22-M5T1U3
S-1313A23-M5T1U3
S-1313A24-M5T1U3
S-1313A25-M5T1U3
S-1313A26-M5T1U3
S-1313A27-M5T1U3
S-1313A28-M5T1U3
S-1313A2J-M5T1U3
S-1313A29-M5T1U3
S-1313A30-M5T1U3
S-1313A31-M5T1U3
S-1313A32-M5T1U3
S-1313A33-M5T1U3
S-1313A34-M5T1U3
S-1313A35-M5T1U3
SC-82AB
S-1313A10-N4T1U3
S-1313A11-N4T1U3
S-1313A12-N4T1U3
S-1313A13-N4T1U3
S-1313A14-N4T1U3
S-1313A15-N4T1U3
S-1313A16-N4T1U3
S-1313A17-N4T1U3
S-1313A18-N4T1U3
S-1313A1J-N4T1U3
S-1313A19-N4T1U3
S-1313A20-N4T1U3
S-1313A21-N4T1U3
S-1313A22-N4T1U3
S-1313A23-N4T1U3
S-1313A24-N4T1U3
S-1313A25-N4T1U3
S-1313A26-N4T1U3
S-1313A27-N4T1U3
S-1313A28-N4T1U3
S-1313A2J-N4T1U3
S-1313A29-N4T1U3
S-1313A30-N4T1U3
S-1313A31-N4T1U3
S-1313A32-N4T1U3
S-1313A33-N4T1U3
S-1313A34-N4T1U3
S-1313A35-N4T1U3
HSNT-4 (1010)
S-1313A10-A4T2U3
S-1313A11-A4T2U3
S-1313A12-A4T2U3
S-1313A13-A4T2U3
S-1313A14-A4T2U3
S-1313A15-A4T2U3
S-1313A16-A4T2U3
S-1313A17-A4T2U3
S-1313A18-A4T2U3
S-1313A1J-A4T2U3
S-1313A19-A4T2U3
S-1313A20-A4T2U3
S-1313A21-A4T2U3
S-1313A22-A4T2U3
S-1313A23-A4T2U3
S-1313A24-A4T2U3
S-1313A25-A4T2U3
S-1313A26-A4T2U3
S-1313A27-A4T2U3
S-1313A28-A4T2U3
S-1313A2J-A4T2U3
S-1313A29-A4T2U3
S-1313A30-A4T2U3
S-1313A31-A4T2U3
S-1313A32-A4T2U3
S-1313A33-A4T2U3
S-1313A34-A4T2U3
S-1313A35-A4T2U3
HSNT-4 (0808)
S-1313A10-A4T1U3
S-1313A11-A4T1U3
S-1313A12-A4T1U3
S-1313A13-A4T1U3
S-1313A14-A4T1U3
S-1313A15-A4T1U3
S-1313A16-A4T1U3
S-1313A17-A4T1U3
S-1313A18-A4T1U3
S-1313A1J-A4T1U3
S-1313A19-A4T1U3
S-1313A20-A4T1U3
S-1313A21-A4T1U3
S-1313A22-A4T1U3
S-1313A23-A4T1U3
S-1313A24-A4T1U3
S-1313A25-A4T1U3
S-1313A26-A4T1U3
S-1313A27-A4T1U3
S-1313A28-A4T1U3
S-1313A2J-A4T1U3
S-1313A29-A4T1U3
S-1313A30-A4T1U3
S-1313A31-A4T1U3
S-1313A32-A4T1U3
S-1313A33-A4T1U3
S-1313A34-A4T1U3
S-1313A35-A4T1U3
Please contact our sales office for products other than the above.
5
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
4. 2
Rev.2.2_00
S-1313 Series B type
ON / OFF logic:
Discharge shunt function:
Active "H"
Available
Constant current source pull-down: Unavailable
Table 4
Output Voltage
1.0 V ± 15 mV
1.1 V ± 15 mV
1.2 V ± 15 mV
1.3 V ± 15 mV
1.4 V ± 15 mV
1.5 V ± 1.0%
1.6 V ± 1.0%
1.7 V ± 1.0%
1.8 V ± 1.0%
1.85 V ± 1.0%
1.9 V ± 1.0%
2.0 V ± 1.0%
2.1 V ± 1.0%
2.2 V ± 1.0%
2.3 V ± 1.0%
2.4 V ± 1.0%
2.5 V ± 1.0%
2.6 V ± 1.0%
2.7 V ± 1.0%
2.8 V ± 1.0%
2.85 V ± 1.0%
2.9 V ± 1.0%
3.0 V ± 1.0%
3.1 V ± 1.0%
3.2 V ± 1.0%
3.3 V ± 1.0%
3.4 V ± 1.0%
3.5 V ± 1.0%
Remark
6
SOT-23-5
S-1313B10-M5T1U3
S-1313B11-M5T1U3
S-1313B12-M5T1U3
S-1313B13-M5T1U3
S-1313B14-M5T1U3
S-1313B15-M5T1U3
S-1313B16-M5T1U3
S-1313B17-M5T1U3
S-1313B18-M5T1U3
S-1313B1J-M5T1U3
S-1313B19-M5T1U3
S-1313B20-M5T1U3
S-1313B21-M5T1U3
S-1313B22-M5T1U3
S-1313B23-M5T1U3
S-1313B24-M5T1U3
S-1313B25-M5T1U3
S-1313B26-M5T1U3
S-1313B27-M5T1U3
S-1313B28-M5T1U3
S-1313B2J-M5T1U3
S-1313B29-M5T1U3
S-1313B30-M5T1U3
S-1313B31-M5T1U3
S-1313B32-M5T1U3
S-1313B33-M5T1U3
S-1313B34-M5T1U3
S-1313B35-M5T1U3
SC-82AB
S-1313B10-N4T1U3
S-1313B11-N4T1U3
S-1313B12-N4T1U3
S-1313B13-N4T1U3
S-1313B14-N4T1U3
S-1313B15-N4T1U3
S-1313B16-N4T1U3
S-1313B17-N4T1U3
S-1313B18-N4T1U3
S-1313B1J-N4T1U3
S-1313B19-N4T1U3
S-1313B20-N4T1U3
S-1313B21-N4T1U3
S-1313B22-N4T1U3
S-1313B23-N4T1U3
S-1313B24-N4T1U3
S-1313B25-N4T1U3
S-1313B26-N4T1U3
S-1313B27-N4T1U3
S-1313B28-N4T1U3
S-1313B2J-N4T1U3
S-1313B29-N4T1U3
S-1313B30-N4T1U3
S-1313B31-N4T1U3
S-1313B32-N4T1U3
S-1313B33-N4T1U3
S-1313B34-N4T1U3
S-1313B35-N4T1U3
HSNT-4 (1010)
S-1313B10-A4T2U3
S-1313B11-A4T2U3
S-1313B12-A4T2U3
S-1313B13-A4T2U3
S-1313B14-A4T2U3
S-1313B15-A4T2U3
S-1313B16-A4T2U3
S-1313B17-A4T2U3
S-1313B18-A4T2U3
S-1313B1J-A4T2U3
S-1313B19-A4T2U3
S-1313B20-A4T2U3
S-1313B21-A4T2U3
S-1313B22-A4T2U3
S-1313B23-A4T2U3
S-1313B24-A4T2U3
S-1313B25-A4T2U3
S-1313B26-A4T2U3
S-1313B27-A4T2U3
S-1313B28-A4T2U3
S-1313B2J-A4T2U3
S-1313B29-A4T2U3
S-1313B30-A4T2U3
S-1313B31-A4T2U3
S-1313B32-A4T2U3
S-1313B33-A4T2U3
S-1313B34-A4T2U3
S-1313B35-A4T2U3
Please contact our sales office for products other than the above.
HSNT-4 (0808)
S-1313B10-A4T1U3
S-1313B11-A4T1U3
S-1313B12-A4T1U3
S-1313B13-A4T1U3
S-1313B14-A4T1U3
S-1313B15-A4T1U3
S-1313B16-A4T1U3
S-1313B17-A4T1U3
S-1313B18-A4T1U3
S-1313B1J-A4T1U3
S-1313B19-A4T1U3
S-1313B20-A4T1U3
S-1313B21-A4T1U3
S-1313B22-A4T1U3
S-1313B23-A4T1U3
S-1313B24-A4T1U3
S-1313B25-A4T1U3
S-1313B26-A4T1U3
S-1313B27-A4T1U3
S-1313B28-A4T1U3
S-1313B2J-A4T1U3
S-1313B29-A4T1U3
S-1313B30-A4T1U3
S-1313B31-A4T1U3
S-1313B32-A4T1U3
S-1313B33-A4T1U3
S-1313B34-A4T1U3
S-1313B35-A4T1U3
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
4. 3
S-1313 Series C type
ON / OFF logic:
Discharge shunt function:
Active "H"
Unavailable
Constant current source pull-down: Available
Table 5
Output Voltage
1.0 V ± 15 mV
1.1 V ± 15 mV
1.2 V ± 15 mV
1.3 V ± 15 mV
1.4 V ± 15 mV
1.5 V ± 1.0%
1.6 V ± 1.0%
1.7 V ± 1.0%
1.8 V ± 1.0%
1.85 V ± 1.0%
1.9 V ± 1.0%
2.0 V ± 1.0%
2.1 V ± 1.0%
2.2 V ± 1.0%
2.3 V ± 1.0%
2.4 V ± 1.0%
2.5 V ± 1.0%
2.6 V ± 1.0%
2.7 V ± 1.0%
2.8 V ± 1.0%
2.85 V ± 1.0%
2.9 V ± 1.0%
3.0 V ± 1.0%
3.1 V ± 1.0%
3.2 V ± 1.0%
3.3 V ± 1.0%
3.4 V ± 1.0%
3.5 V ± 1.0%
Remark
SOT-23-5
S-1313C10-M5T1U3
S-1313C11-M5T1U3
S-1313C12-M5T1U3
S-1313C13-M5T1U3
S-1313C14-M5T1U3
S-1313C15-M5T1U3
S-1313C16-M5T1U3
S-1313C17-M5T1U3
S-1313C18-M5T1U3
S-1313C1J-M5T1U3
S-1313C19-M5T1U3
S-1313C20-M5T1U3
S-1313C21-M5T1U3
S-1313C22-M5T1U3
S-1313C23-M5T1U3
S-1313C24-M5T1U3
S-1313C25-M5T1U3
S-1313C26-M5T1U3
S-1313C27-M5T1U3
S-1313C28-M5T1U3
S-1313C2J-M5T1U3
S-1313C29-M5T1U3
S-1313C30-M5T1U3
S-1313C31-M5T1U3
S-1313C32-M5T1U3
S-1313C33-M5T1U3
S-1313C34-M5T1U3
S-1313C35-M5T1U3
SC-82AB
S-1313C10-N4T1U3
S-1313C11-N4T1U3
S-1313C12-N4T1U3
S-1313C13-N4T1U3
S-1313C14-N4T1U3
S-1313C15-N4T1U3
S-1313C16-N4T1U3
S-1313C17-N4T1U3
S-1313C18-N4T1U3
S-1313C1J-N4T1U3
S-1313C19-N4T1U3
S-1313C20-N4T1U3
S-1313C21-N4T1U3
S-1313C22-N4T1U3
S-1313C23-N4T1U3
S-1313C24-N4T1U3
S-1313C25-N4T1U3
S-1313C26-N4T1U3
S-1313C27-N4T1U3
S-1313C28-N4T1U3
S-1313C2J-N4T1U3
S-1313C29-N4T1U3
S-1313C30-N4T1U3
S-1313C31-N4T1U3
S-1313C32-N4T1U3
S-1313C33-N4T1U3
S-1313C34-N4T1U3
S-1313C35-N4T1U3
HSNT-4 (1010)
S-1313C10-A4T2U3
S-1313C11-A4T2U3
S-1313C12-A4T2U3
S-1313C13-A4T2U3
S-1313C14-A4T2U3
S-1313C15-A4T2U3
S-1313C16-A4T2U3
S-1313C17-A4T2U3
S-1313C18-A4T2U3
S-1313C1J-A4T2U3
S-1313C19-A4T2U3
S-1313C20-A4T2U3
S-1313C21-A4T2U3
S-1313C22-A4T2U3
S-1313C23-A4T2U3
S-1313C24-A4T2U3
S-1313C25-A4T2U3
S-1313C26-A4T2U3
S-1313C27-A4T2U3
S-1313C28-A4T2U3
S-1313C2J-A4T2U3
S-1313C29-A4T2U3
S-1313C30-A4T2U3
S-1313C31-A4T2U3
S-1313C32-A4T2U3
S-1313C33-A4T2U3
S-1313C34-A4T2U3
S-1313C35-A4T2U3
HSNT-4 (0808)
S-1313C10-A4T1U3
S-1313C11-A4T1U3
S-1313C12-A4T1U3
S-1313C13-A4T1U3
S-1313C14-A4T1U3
S-1313C15-A4T1U3
S-1313C16-A4T1U3
S-1313C17-A4T1U3
S-1313C18-A4T1U3
S-1313C1J-A4T1U3
S-1313C19-A4T1U3
S-1313C20-A4T1U3
S-1313C21-A4T1U3
S-1313C22-A4T1U3
S-1313C23-A4T1U3
S-1313C24-A4T1U3
S-1313C25-A4T1U3
S-1313C26-A4T1U3
S-1313C27-A4T1U3
S-1313C28-A4T1U3
S-1313C2J-A4T1U3
S-1313C29-A4T1U3
S-1313C30-A4T1U3
S-1313C31-A4T1U3
S-1313C32-A4T1U3
S-1313C33-A4T1U3
S-1313C34-A4T1U3
S-1313C35-A4T1U3
Please contact our sales office for products other than the above.
7
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
4. 4
Rev.2.2_00
S-1313 Series D type
ON / OFF logic:
Discharge shunt function:
Active "H"
Unavailable
Constant current source pull-down: Unavailable
Table 6
Output Voltage
1.0 V ± 15 mV
1.1 V ± 15 mV
1.2 V ± 15 mV
1.3 V ± 15 mV
1.4 V ± 15 mV
1.5 V ± 1.0%
1.6 V ± 1.0%
1.7 V ± 1.0%
1.8 V ± 1.0%
1.85 V ± 1.0%
1.9 V ± 1.0%
2.0 V ± 1.0%
2.1 V ± 1.0%
2.2 V ± 1.0%
2.3 V ± 1.0%
2.4 V ± 1.0%
2.5 V ± 1.0%
2.6 V ± 1.0%
2.7 V ± 1.0%
2.8 V ± 1.0%
2.85 V ± 1.0%
2.9 V ± 1.0%
3.0 V ± 1.0%
3.1 V ± 1.0%
3.2 V ± 1.0%
3.3 V ± 1.0%
3.4 V ± 1.0%
3.5 V ± 1.0%
Remark
8
SOT-23-5
S-1313D10-M5T1U3
S-1313D11-M5T1U3
S-1313D12-M5T1U3
S-1313D13-M5T1U3
S-1313D14-M5T1U3
S-1313D15-M5T1U3
S-1313D16-M5T1U3
S-1313D17-M5T1U3
S-1313D18-M5T1U3
S-1313D1J-M5T1U3
S-1313D19-M5T1U3
S-1313D20-M5T1U3
S-1313D21-M5T1U3
S-1313D22-M5T1U3
S-1313D23-M5T1U3
S-1313D24-M5T1U3
S-1313D25-M5T1U3
S-1313D26-M5T1U3
S-1313D27-M5T1U3
S-1313D28-M5T1U3
S-1313D2J-M5T1U3
S-1313D29-M5T1U3
S-1313D30-M5T1U3
S-1313D31-M5T1U3
S-1313D32-M5T1U3
S-1313D33-M5T1U3
S-1313D34-M5T1U3
S-1313D35-M5T1U3
SC-82AB
S-1313D10-N4T1U3
S-1313D11-N4T1U3
S-1313D12-N4T1U3
S-1313D13-N4T1U3
S-1313D14-N4T1U3
S-1313D15-N4T1U3
S-1313D16-N4T1U3
S-1313D17-N4T1U3
S-1313D18-N4T1U3
S-1313D1J-N4T1U3
S-1313D19-N4T1U3
S-1313D20-N4T1U3
S-1313D21-N4T1U3
S-1313D22-N4T1U3
S-1313D23-N4T1U3
S-1313D24-N4T1U3
S-1313D25-N4T1U3
S-1313D26-N4T1U3
S-1313D27-N4T1U3
S-1313D28-N4T1U3
S-1313D2J-N4T1U3
S-1313D29-N4T1U3
S-1313D30-N4T1U3
S-1313D31-N4T1U3
S-1313D32-N4T1U3
S-1313D33-N4T1U3
S-1313D34-N4T1U3
S-1313D35-N4T1U3
HSNT-4 (1010)
S-1313D10-A4T2U3
S-1313D11-A4T2U3
S-1313D12-A4T2U3
S-1313D13-A4T2U3
S-1313D14-A4T2U3
S-1313D15-A4T2U3
S-1313D16-A4T2U3
S-1313D17-A4T2U3
S-1313D18-A4T2U3
S-1313D1J-A4T2U3
S-1313D19-A4T2U3
S-1313D20-A4T2U3
S-1313D21-A4T2U3
S-1313D22-A4T2U3
S-1313D23-A4T2U3
S-1313D24-A4T2U3
S-1313D25-A4T2U3
S-1313D26-A4T2U3
S-1313D27-A4T2U3
S-1313D28-A4T2U3
S-1313D2J-A4T2U3
S-1313D29-A4T2U3
S-1313D30-A4T2U3
S-1313D31-A4T2U3
S-1313D32-A4T2U3
S-1313D33-A4T2U3
S-1313D34-A4T2U3
S-1313D35-A4T2U3
Please contact our sales office for products other than the above.
HSNT-4 (0808)
S-1313D10-A4T1U3
S-1313D11-A4T1U3
S-1313D12-A4T1U3
S-1313D13-A4T1U3
S-1313D14-A4T1U3
S-1313D15-A4T1U3
S-1313D16-A4T1U3
S-1313D17-A4T1U3
S-1313D18-A4T1U3
S-1313D1J-A4T1U3
S-1313D19-A4T1U3
S-1313D20-A4T1U3
S-1313D21-A4T1U3
S-1313D22-A4T1U3
S-1313D23-A4T1U3
S-1313D24-A4T1U3
S-1313D25-A4T1U3
S-1313D26-A4T1U3
S-1313D27-A4T1U3
S-1313D28-A4T1U3
S-1313D2J-A4T1U3
S-1313D29-A4T1U3
S-1313D30-A4T1U3
S-1313D31-A4T1U3
S-1313D32-A4T1U3
S-1313D33-A4T1U3
S-1313D34-A4T1U3
S-1313D35-A4T1U3
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Pin Configurations
1.
SOT-23-5
Top view
5
4
1 2 3
Table 7
Pin No.
1
2
3
4
5
Symbol
VIN
VSS
ON / OFF
NC*1
VOUT
Description
Input voltage pin
GND pin
ON / OFF pin
No connection
Output voltage pin
Figure 5
*1.
2.
The NC pin is electrically open.
The NC pin can be connected to the VIN pin or the VSS pin.
SC-82AB
Top view
4
3
1
2
Table 8
Pin No.
1
2
3
4
Symbol
ON / OFF
VSS
VOUT
VIN
Description
ON / OFF pin
GND pin
Output voltage pin
Input voltage pin
Figure 6
9
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
3.
Rev.2.2_00
HSNT-4 (1010)
Top view
1
2
4
3
Bottom view
4
3
Table 9
Pin No.
1
2
3
4
Symbol
VOUT
VSS
ON / OFF
VIN
Description
Output voltage pin
GND pin
ON / OFF pin
Input voltage pin
1
2
*1
Figure 7
*1.
4.
Connect the heatsink of backside at shadowed area to the board, and set electric potential GND.
However, do not use it as the function of electrode.
HSNT-4 (0808)
Top view
1
2
4
3
Bottom view
4
3
Table 10
Pin No.
1
2
3
4
Symbol
VOUT
VSS
ON / OFF
VIN
Description
Output voltage pin
GND pin
ON / OFF pin
Input voltage pin
1
2
*1
Figure 8
*1.
10
Connect the heat sink of backside at shadowed area to the board, and set electric potential GND.
However, do not use it as the function of electrode.
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Absolute Maximum Ratings
Table 11
Item
Symbol
VIN
VON / OFF
VOUT
IOUT
Input voltage
Output voltage
Output current
SOT-23-5
SC-82AB
Power dissipation
PD
HSNT-4 (1010)
HSNT-4 (0808)
Operation ambient temperature
Topr
Storage temperature
Tstg
*1. When mounted on board
[Mounted board]
(1) Board size:
114.3 mm × 76.2 mm × t1.6 mm
(2) Name:
JEDEC STANDARD51-7
VSS − 0.3 to VSS + 6.0
VSS − 0.3 to VSS + 6.0
VSS − 0.3 to VIN + 0.3
240
600*1
400*1
340*1
335*1
−40 to +85
−40 to +125
V
V
V
mA
mW
mW
mW
mW
°C
°C
The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
1200
Power Dissipation (PD) [mW]
Caution
(Ta = +25°C unless otherwise specified)
Absolute Maximum Rating
Unit
800
600
400
200
0
Figure 9
HSNT-4 (1010)
HSNT-4 (0808)
SC-82AB
SOT-23-5
1000
0
150
100
50
Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
11
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Power Dissipation of HSNT-4 (1010) and HSNT-4 (0808) (Reference)
Power dissipation of package differs depending on the mounting conditions.
Consider the power dissipation characteristics under the following conditions as reference.
[Mounted board]
(1) Board size:
40 mm × 40 mm × t0.8 mm
(2) Board material:
Glass epoxy resin (four layers)
(3) Wiring ratio:
50%
(4) Test conditions:
When mounted on board (wind speed: 0 m/s)
(5) Land pattern:
Refer to the recommended land pattern
Drawing code: PL004-A-L-SD (HSNT-4 (1010)), PK004-A-L-SD (HSNT-4 (0808))
Power Dissipation (PD) [mW]
1200
HSNT-4 (1010)
1000
800
600
400
200
0
Figure 10
HSNT-4 (0808)
0
150
100
50
Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
Table 12
Condition
HSNT-4 (1010) (When mounted on board)
HSNT-4 (0808) (When mounted on board)
12
Power Dissipation (Reference)
870 mW
850 mW
Thermal Resistance Value (θj − a)
115°C/W
117°C/W
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Electrical Characteristics
Table 13
Item
Symbol
(Ta = +25°C unless otherwise specified)
Test
Condition
Min.
Typ.
Max.
Unit
Circuit
VOUT(S)
VOUT(S)
1.0 V ≤ VOUT(S) < 1.5 V
VOUT(S)
V
1
− 0.015
+ 0.015
VIN = VOUT(S) + 1.0 V,
IOUT = 30 mA
VOUT(S)
VOUT(S)
1.5 V ≤ VOUT(S) ≤ 3.5 V
VOUT(S)
V
1
× 0.99
× 1.01
mA
3
1.0 V ≤ VOUT(S) < 1.1 V 100*5
−
−
mA
3
1.1 V ≤ VOUT(S) < 1.2 V 125*5
−
−
mA
3
1.2 V ≤ VOUT(S) < 1.3 V 150*5
−
−
VIN ≥ VOUT(S) + 1.0 V
mA
3
1.3 V ≤ VOUT(S) < 1.4 V 175*5
−
−
mA
3
1.4 V ≤ VOUT(S) ≤ 3.5 V 200*5
−
−
0.76
1.55
V
1
1.0 V ≤ VOUT(S) < 1.1 V 0.50
0.67
1.39
V
1
1.1 V ≤ VOUT(S) < 1.2 V
−
0.58
1.25
V
1
1.2 V ≤ VOUT(S) < 1.3 V
−
0.49
1.11
V
1
1.3 V ≤ VOUT(S) < 1.4 V
−
0.43
0.99
V
1
1.4 V ≤ VOUT(S) < 1.5 V
−
0.37
0.85
V
1
1.5 V ≤ VOUT(S) < 1.7 V
−
IOUT = 100 mA
0.31
0.68
V
1
1.7 V ≤ VOUT(S) < 1.8 V
−
0.27
0.58
V
1
1.8 V ≤ VOUT(S) < 2.0 V
−
0.23
0.49
V
1
2.0 V ≤ VOUT(S) < 2.5 V
−
0.18
0.38
V
1
2.5 V ≤ VOUT(S) < 2.8 V
−
0.17
0.33
V
1
2.8 V ≤ VOUT(S) < 3.0 V
−
0.16
0.32
V
1
3.0 V ≤ VOUT(S) ≤ 3.5 V
−
VOUT(S) + 0.5 V ≤ VIN ≤ 5.5 V,
0.05
0.2
%/V
1
−
1.0 V ≤ VOUT(S) ≤ 3.5 V
IOUT = 1 μA
0.07
2.0
%/V
1
−
1.0 V ≤ VOUT(S) < 1.1 V
VOUT(S) + 0.5 V ≤ VIN ≤ 5.5 V,
0.06
1.0
%/V
1
1.1 V ≤ VOUT(S) < 1.2 V
−
IOUT = 30 mA
0.05
0.2
%/V
1
1.2 V ≤ VOUT(S) ≤ 3.5 V
−
VIN = VOUT(S) + 1.0 V,
20
40
mV
1
−
1.0 V ≤ VOUT(S) ≤ 3.5 V
1 μA ≤ IOUT ≤ 100 mA
40
640
mV
1
−
1.0 V ≤ VOUT(S) < 1.1 V
40
400
mV
1
1.1 V ≤ VOUT(S) < 1.2 V
−
VIN = VOUT(S) + 1.0 V,
40
160
mV
1
1.2 V ≤ VOUT(S) < 1.3 V
−
100 μA ≤ IOUT ≤ 200 mA
40
80
mV
1
1.3 V ≤ VOUT(S) < 1.4 V
−
40
80
mV
1
1.4 V ≤ VOUT(S) ≤ 3.5 V
−
Output voltage*1
VOUT(E)
Output current*2
IOUT
Dropout voltage*3
Vdrop
Line regulation
ΔVOUT1
ΔVIN• VOUT
Load regulation
ΔVOUT2
Output voltage temperature coefficient*4
ΔVOUT
ΔTa • VOUT
VIN = VOUT(S) + 1.0 V, IOUT = 30 mA,
−40°C ≤ Ta ≤ +85°C
Current consumption during operation
Current consumption during power-off
Input voltage
ISS1
ISS2
VIN
ON / OFF pin input voltage "H"
VSH
ON / OFF pin input voltage "L"
VSL
ON / OFF pin input current "H"
ISH
ON / OFF pin input current "L"
Short-circuit current
Thermal shutdown detection
temperature
Thermal shutdown release temperature
Discharge shunt resistance during
power-off
ISL
Ishort
VIN = VOUT(S) + 1.0 V, ON / OFF pin = ON, no load
VIN = VOUT(S) + 1.0 V, ON / OFF pin = OFF, no load
−
VIN = VOUT(S) + 1.0 V, RL = 1.0 kΩ,
determined by VOUT output level
VIN = VOUT(S) + 1.0 V, RL = 1.0 kΩ,
determined by VOUT output level
B / D type (without constant current source pull-down)
VIN = 5.5 V,
VON / OFF = 5.5 V A / C type (with constant current source pull-down)
VIN = 5.5 V, VON / OFF = 0 V
VIN = VOUT(S) + 1.0 V, ON / OFF pin = ON, VOUT = 0 V
TSD
TSR
RLOW
−
±130
−
ppm/°C
1
−
−
1.5
0.9
0.01
−
1.35
0.1
5.5
μA
μA
V
2
2
−
1.0
−
−
V
4
−
−
0.25
V
4
−0.1
0.05
−0.1
−
−
0.1
−
50
0.1
0.2
0.1
−
μA
μA
μA
mA
4
4
4
3
Junction temperature
−
150
−
°C
−
Junction temperature
VOUT = 0.1 V, A / B type
(with discharge shunt function)
VIN = 5.5 V
−
120
−
°C
−
−
35
−
Ω
3
13
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
*1. VOUT(S): Set output voltage
VOUT(E): Actual output voltage
Output voltage when fixing IOUT (= 30 mA) and inputting VOUT(S) + 1.0 V
*2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current.
*3. Vdrop = VIN1 − (VOUT3 × 0.98)
VOUT3 is the output voltage when VIN = VOUT(S) + 1.0 V and IOUT = 100 mA.
VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input
voltage.
*4. A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.
ΔVOUT
ΔVOUT
[mV/°C]*1 = VOUT(S) [V]*2 × ΔTa•VOUT [ppm/°C]*3 ÷ 1000
ΔTa
*1. Change in temperature of output voltage
*2. Set output voltage
*3. Output voltage temperature coefficient
*5. The output current can be at least this value.
Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the
power dissipation of the package when the output current is large.
This specification is guaranteed by design.
14
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Test Circuits
+
VOUT
VIN
ON / OFF
VSS
V
A
+
Set to ON
Figure 11
+
A
Test Circuit 1
VOUT
VIN
ON / OFF
VSS
Set to VIN or GND
Figure 12
Test Circuit 2
VOUT
VIN
ON / OFF
A
V
+
VSS
Set to VIN or GND
Figure 13
Test Circuit 3
VOUT
VIN
+
A
ON / OFF
V
VSS
Figure 14
+
RL
Test Circuit 4
15
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Standard Circuit
Input
Output
VOUT
VIN
CIN
*1
ON / OFF
VSS
Single GND
*1.
*2.
CL
*2
GND
CIN is a capacitor for stabilizing the input.
A ceramic capacitor of 0.1 μF or more can be used as CL.
Figure 15
Caution
The above connection diagram and constants will not guarantee successful operation. Perform
thorough evaluation using the actual application to set the constansts.
Condition of Application
Input capacitor (CIN):
Output capacitor (CL):
0.1 μF or more
0.1 μF or more
Caution Generally a series regulator may cause oscillation, depending on the selection of external parts.
Confirm that no oscillation occurs in the application for which the above capacitors are used.
Selection of Input and Output Capacitors (CIN, CL)
The S-1313 Series requires an output capacitor between the VOUT pin and the VSS pin for phase compensation.
Operation is stabilized by a ceramic capacitor with an output capacitance of 0.1 μF or more over the entire temperature
range. When using an OS capacitor, a tantalum capacitor, or an aluminum electrolytic capacitor, the capacitance must
be 0.1 μF or more.
The value of the output overshoot or undershoot transient response varies depending on the value of the output
capacitor. The required capacitance of the input capacitor differs depending on the application.
The recommended capacitance for an application is CIN ≥ 0.1 μF, CL ≥ 0.1 μF; however, when selecting the output
capacitor, perform sufficient evaluation, including evaluation of temperature characteristics, on the actual device.
16
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Explanation of Terms
1.
Low dropout voltage regulator
This voltage regulator has the low dropout voltage due to its built-in low on-resistance transistor.
2.
Output voltage (VOUT)
The accuracy of the output voltage is ensured at ±1.0% or ±15 mV*1 under the specified conditions of fixed input
voltage*2, fixed output current, and fixed temperature.
*1.
*2.
When VOUT < 1.5 V: ±15 mV, when VOUT ≥ 1.5 V: ±1.0%
Differs depending on the product.
Caution
3.
If the above conditions change, the output voltage value may vary and exceed the accuracy range
of the output voltage. Refer to " Electrical Characteristics" and " Characteristics (Typical
Data)" for details.
ΔVOUT1
ΔVIN • VOUT
Line regulation
Indicates the dependency of the output voltage on the input voltage. That is, the values show how much the output
voltage changes due to a change in the input voltage with the output current remaining unchanged.
4.
Load regulation (ΔVOUT2)
Indicates the dependency of the output voltage on the output current. That is, the values show how much the output
voltage changes due to a change in the output current with the input voltage remaining unchanged.
5.
Dropout voltage (Vdrop)
Indicates the difference between input voltage (VIN1) and the output voltage when; decreasing input voltage (VIN)
gradually until the output voltage has dropped out to the value of 98% of output voltage (VOUT3), which is at VIN =
VOUT(S) + 1.0 V.
Vdrop = VIN1 − (VOUT3 × 0.98)
17
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
6.
Rev.2.2_00
ΔVOUT
ΔTa • VOUT
Output voltage temperature coefficient
The shaded area in Figure 16 is the range where VOUT varies in the operation temperature range when the output
voltage temperature coefficient is ±130 ppm/°C.
Example of S-1313A10 typ. product
VOUT
[V]
+0.13 mV/°C
*1
VOUT(E)
−0.13 mV/°C
−40
*1.
+25
+85
Ta [°C]
VOUT(E) is the value of the output voltage measured at Ta = +25°C.
Figure 16
A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.
ΔVOUT
ΔVOUT
[mV/°C]*1 = VOUT(S) [V]*2 × ΔTa • VOUT [ppm/°C]*3 ÷ 1000
ΔTa
*1. Change in temperature of output voltage
*2. Set output voltage
*3. Output voltage temperature coefficient
18
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Operation
1.
Basic operation
Figure 17 shows the block diagram of the S-1313 Series.
The error amplifier compares the reference voltage (Vref) with feedback voltage (Vfb), which is the output voltage
resistance-divided by feedback resistors (Rs and Rf). It supplies the gate voltage necessary to maintain the constant
output voltage which is not influenced by the input voltage and temperature change, to the output transistor.
VIN
*1
Current
supply
Error
amplifier
Vref
VOUT
−
Rf
+
Vfb
Reference voltage
circuit
Rs
VSS
*1.
Parasitic diode
Figure 17
2.
Output transistor
In the S-1313 Series, a low on-resistance P-channel MOS FET is used as the output transistor.
Be sure that VOUT does not exceed VIN + 0.3 V to prevent the voltage regulator from being damaged due to reverse
current flowing from the VOUT pin through a parasitic diode to the VIN pin, when the potential of VOUT became higher
than VIN.
19
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
3.
Rev.2.2_00
ON / OFF pin
This pin starts and stops the regulator.
When the ON / OFF pin is set to OFF level, the entire internal circuit stops operating, and the built-in P-channel MOS
FET output transistor between the VIN pin and the VOUT pin is turned off, reducing current consumption significantly.
Note that the current consumption increases when a voltage of 0.25 V to VIN − 0.3 V is applied to the ON / OFF pin.
The ON / OFF pin is configured as shown in Figure 18 and Figure 19.
3. 1 S-1313 Series A / C type
The ON / OFF pin is internally pulled down to the VSS pin in the floating status, so the VOUT pin is set to the VSS
level.
3. 2 S-1313 Series B / D type
The ON / OFF pin is not internally pulled down to the VSS pin, so do not use this pin in the floating status. When not
using the ON / OFF pin, connect the pin to the VIN pin.
Table 14
Product Type
ON / OFF Pin
Internal Circuit
VOUT Pin Voltage
Current Consumption
ISS1*1
A/B/C/D
"H": ON
Operate
Set value
A/B/C/D
"L": OFF
Stop
VSS level
ISS2
*1. Note that the IC's current consumption increases as much as current flows into the constant current of 0.1
μA typ. when the ON / OFF pin is connected to the VIN pin and the S-1313 Series A / C type is operating
(refer to Figure 18).
VIN
ON / OFF
VIN
ON / OFF
VSS
Figure 18
20
S-1313 Series A / C type
VSS
Figure 19
S-1313 Series B / D type
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
4.
Discharge shunt function (S-1313 Series A / B type)
The S-1313 Series A / B type has a built-in discharge shunt circuit to discharge the output capacitance.
The output capacitance is discharged as follows so that the VOUT pin reaches the VSS level.
(1) The ON / OFF pin is set to OFF level.
(2) The output transistor is turned off.
(3) The discharge shunt circuit is turned on.
(4) The output capacitor discharges.
Since the S-1313 Series C / D type does not have a discharge shunt circuit, the VOUT pin is set to VSS level through
several MΩ internal divided resistors between the VOUT pin and the VSS pin. The S-1313 Series A / B type allows the
VOUT pin to reach the VSS level rapidly due to the discharge shunt circuit.
S-1313 Series
Output transistor: OFF
*1
VOUT
VIN
Discharge shunt circuit
: ON
*1
ON / OFF
ON / OFF circuit
Output
capacitor
(CL)
ON / OFF Pin: OFF
Current flow
GND
VSS
*1. Parasitic diode
Figure 20
5.
Constant current source pull-down (S-1313 Series A / C type)
The ON / OFF pin is internally pulled down to the VSS pin in the floating status, so the VOUT pin is set to the VSS level.
Note that the IC's current consumption increases as much as current flows into the constant current of 0.1 μA typ. when
the ON / OFF pin is connected to the VIN pin and the S-1313 Series A / C type is operating.
21
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
6.
Rev.2.2_00
Overcurrent protection circuit
The S-1313 Series includes an overcurrent protection circuit which has the characteristics shown in "1. Output
voltage vs. Output current (When load current increases) (Ta = +25°C)" in " Characteristics (Typical Data)", in
order to protect the output transistor against an excessive output current and short circuiting between the VOUT pin
and the VSS pin. The current when the output pin is short-circuited (Ishort) is internally set at approx. 50 mA typ., and the
normal value is restored for the output voltage, if releasing a short circuit once.
Caution This overcurrent protection circuit does not work as for thermal protection. If this IC long keeps short
circuiting inside, pay attention to the conditions of input voltage and load current so that, under the
usage conditions including short circuit, the loss of the IC will not exceed power dissipation of the
package.
7.
Thermal shutdown circuit
The S-1313 Series has a thermal shutdown circuit to protect the device from damage due to overheat. When the
junction temperature rises to 150°C typ., the thermal shutdown circuit operates to stop regulating. When the junction
temperature drops to 120°C typ., the thermal shutdown circuit is released to restart regulating.
Due to self-heating of the S-1313 Series, if the thermal shutdown circuit starts operating, it stops regulating so that the
output voltage drops. When regulation stops, the S-1313 Series does not itself generate heat and the IC's
temperature drops. When the temperature drops, the thermal shutdown circuit is released to restart regulating, thus
this IC generates heat again. Repeating this procedure makes the waveform of the output voltage into a pulse-like
form. Stop or restart of regulation continues unless decreasing either or both of the input voltage and the output
current in order to reduce the internal power consumption, or decreasing the ambient temperature.
Table 15
Thermal Shutdown Circuit
Operate: 150°C typ.*1
Release: 120°C typ.*1
*1. Junction temperature
8.
VOUT Pin Voltage
VSS level
Set value
Thermal shutdown circuit stop function
The S-1313 Series has a thermal shutdown circuit stop function during low load current.
When the load current is approx. 0.2 mA or less, the current that flows in the thermal shutdown circuit is stopped and
the thermal shutdown circuit stops operating. This makes the super low current consumption operation possible.
When the load current is approx. 0.5 mA or more, a current is applied to the thermal shutdown circuit, thus making the
protection operation possible.
7.0
6.0
Operation at super low current consumption
ISS1 [μA]
5.0
4.0
3.0
2.0
Thermal shutdown circuit operating
1.0
0
0
0.5
1.0
1.5
IOUT [mA]
Figure 21
22
2.0
2.5
3.0
Rev.2.2_00
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Precautions
• Wiring patterns for the VIN pin, the VOUT pin and GND should be designed so that the impedance is low. When
mounting an output capacitor between the VOUT pin and the VSS pin (CL) and a capacitor for stabilizing the input
between the VIN pin and the VSS pin (CIN), the distance from the capacitors to these pins should be as short as
possible.
• Note that generally the output voltage may increase when a series regulator is used at low load current (10 μA or less).
• Note that generally the output voltage may increase due to the leakage current from an output driver when a series
regulator is used at high temperature.
• Note that the output voltage may increase due to the leakage current from an output driver even if the ON / OFF pin is
at OFF level when a series regulator is used at high temperature.
• Generally a series regulator may cause oscillation, depending on the selection of external parts. The following
conditions are recommended for the S-1313 Series. However, be sure to perform sufficient evaluation under the actual
usage conditions for selection, including evaluation of temperature characteristics. Refer to "6. Example of
equivalent series resistance vs. Output current characteristics (Ta = +25°C)" in " Reference Data" for the
equivalent series resistance (RESR) of the output capacitor.
Input capacitor (CIN):
Output capacitor (CL):
0.1 μF or more
0.1 μF or more
• The voltage regulator may oscillate when the impedance of the power supply is high and the input capacitance is small
or an input capacitor is not connected.
• Ringing may occur when these three conditions below are satisfied. Before selecting an input capacitor, be sure to
evaluate sufficiently under the actual usage conditions, including the temperature characteristics.
The power supply inductance is high.
The load current is 100 mA or more.
The difference between the input voltage and the output voltage is close to the value of dropout voltage.
• If the output capacitance is small, power supply's fluctuation and the characteristics of load fluctuation become worse.
Sufficiently evaluate the output voltage's fluctuation with the actual device.
• Overshoot may occur in the output voltage momentarily if the voltage is rapidly raised at power-on or when the power
supply fluctuates. Sufficiently evaluate the output voltage at power-on with the actual device.
• The application conditions for the input voltage, the output voltage, and the load current should not exceed the
package power dissipation.
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
• In determining the output current, attention should be paid to the output current value specified in Table 13 in
" Electrical Characteristics" and footnote *5 of the table.
• ABLIC Inc. claims no responsibility for any disputes arising out of or in connection with any infringement by products
including this IC of patents owned by a third party.
23
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Characteristics (Typical Data)
Output voltage vs. Output current (When load current increases) (Ta = +25°C)
1. 1
VOUT = 1.0 V
1.2
VIN = 2.0 V
1.0
VOUT [V]
VIN = 1.3 V
0.6
0.4
0
1. 3
100
400
VIN = 3.0 V
1.0
VIN = 5.5 V
0.5
VIN = 3.5 V
0
0
100
200
300
IOUT [mA]
400
500
Remark
100
200
300
IOUT [mA]
In determining the output current, attention should
be paid to the following.
1. The minimum output current value and
footnote *5 in Table 13 in " Electrical
Characteristics"
400
2. The package power dissipation
500
Output voltage vs. Input voltage (Ta = +25°C)
2. 1
VOUT = 1.0 V
2. 2
1.2
1.0
VOUT [V]
VOUT [V]
1.1
IOUT = 1 mA
IOUT = 30 mA
IOUT = 50 mA
IOUT = 100 mA
0.9
0.8
0.7
0.6
0.6
2. 3
VOUT [V]
VIN = 2.8 V
1.5
500
VIN = 3.8 V
VIN = 4.0 V
VIN = 4.5 V
VIN = 5.5 V
0
1.0
1.4
1.8
VIN [V]
2.2
2.6
5.0
5.5
VOUT = 3.5 V
3.7
3.6
3.5
3.4
3.3
3.2
3.1
3.0
IOUT = 1 mA
IOUT = 30 mA
IOUT = 50 mA
IOUT = 100 mA
3.0
24
2.0
VOUT = 3.5 V
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
VOUT [V]
200
300
IOUT [mA]
VIN = 4.5 V
2.5
VIN = 1.5 V VIN = 5.5 V
0
VOUT = 2.5 V
3.0
VIN = 3.0 V
0.8
0.2
2.
1. 2
VOUT [V]
1.
3.5
4.0
4.5
VIN [V]
VOUT = 2.5 V
2.7
2.6
2.5
2.4
2.3
2.2
2.1
2.0
IOUT = 1 mA
IOUT = 30 mA
IOUT = 50 mA
IOUT = 100 mA
2.0
2.5
3.0
3.5
VIN [V]
4.0
4.5
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Dropout voltage vs. Output current
3. 1
VOUT = 1.0 V
Vdrop [V]
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Ta = +85°C
Ta = +25°C
Ta = −40°C
0
Vdrop [V]
3. 3
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
50
75 100 125 150 175 200
IOUT [mA]
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
Ta = +85°C
Ta = +25°C
Ta = −40°C
0
25
50
75 100 125 150 175 200
IOUT [mA]
Ta = +85°C
Ta = +25°C
Ta = −40°C
25
50
75 100 125 150 175 200
IOUT [mA]
Dropout voltage vs. Set output voltage
1.2
IOUT = 200 mA
IOUT = 100 mA
IOUT = 50 mA
IOUT = 30 mA
IOUT = 10 mA
IOUT = 1 mA
IOUT = 0.1 mA
1.0
Vdrop [V]
25
VOUT = 2.5 V
VOUT = 3.5 V
0
4.
3. 2
Vdrop [V]
3.
0.8
0.6
0.4
0.2
0
1.0
1.5
2.0
2.5
VOUT(S) [V]
3.0
3.5
25
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Output voltage vs. Ambient temperature
VOUT [V]
5. 1
VOUT = 1.0 V
5. 2
2.7
1.05
2.6
1.00
0.95
0.90
5. 3
VOUT = 2.5 V
1.10
VOUT [V]
5.
Rev.2.2_00
2.5
2.4
−40 −25
2.3
0
25
Ta [°C]
50
75 85
0
25
Ta [°C]
50
75 85
−40 −25
0
25
Ta [°C]
75 85
50
VOUT = 3.5 V
3.8
3.7
VOUT [V]
3.6
3.5
3.4
3.3
3.2
Current consumption vs. Input voltage
ISS1 [μA]
6. 1
VOUT = 1.0 V
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Ta = +85°C
Ta = +25°C
Ta = −40°C
0
ISS1 [μA]
6. 3
1
2
3
VIN [V]
4
5
6
VOUT = 3.5 V
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Ta = +85°C
Ta = +25°C
Ta = −40°C
0
26
6. 2
ISS1 [μA]
6.
−40 −25
1
2
3
VIN [V]
4
5
6
VOUT = 2.5 V
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Ta = +85°C
Ta = +25°C
Ta = −40°C
0
1
2
3
VIN [V]
4
5
6
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Current consumption vs. Ambient temperature
7. 1
VOUT = 1.0 V
ISS1 [μA]
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
VIN = 5.5 V
VIN = 2.0 V
−40 −25
7. 3
ISS1 [μA]
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
25
Ta [°C]
50
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
VIN = 5.5 V
VIN = 3.5 V
−40 −25
75 85
0
25
Ta [°C]
50
75 85
5.5 V
VIN = 4.5 V
0
25
Ta [°C]
50
75 85
Current consumption vs. Output current
VOUT = 1.0 V
40
35
30
25
20
15
10
5
0
VIN = 2.0 V
VIN = 5.5 V
0
8. 3
8. 2
ISS1 [μA]
ISS1 [μA]
8. 1
ISS1 [μA]
0
VOUT = 2.5 V
VOUT = 3.5 V
−40 −25
8.
7. 2
ISS1 [μA]
7.
40
80
120
IOUT [mA]
160
200
VOUT = 2.5 V
40
35
30
25
20
15
10
5
0
VIN = 3.5 V
VIN = 5.5 V
0
40
80
120
IOUT [mA]
160
200
VOUT = 3.5 V
40
35
30
25
20
15
10
5
0
VIN = 4.5 V
VIN = 5.5 V
0
40
80
120
IOUT [mA]
160
200
27
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Reference Data
Transient response characteristics when input (Ta = +25°C)
VOUT = 1.0 V
1. 2
VIN
VOUT
−40 −20 0
20 40 60 80 100 120 140
t [μs]
VIN
VOUT
−40 −20 0
VOUT [V]
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
VOUT
−40 −20 0
20 40 60 80 100 120 140
t [μs]
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
VIN
VOUT
−40 −20 0
20 40 60 80 100 120 140
t [μs]
VOUT = 3.5 V
VIN
VOUT
−40 −20 0
20 40 60 80 100 120 140
t [μs]
VOUT [V]
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
IOUT = 100 mA, CIN = CL = 0.1 μF, VIN = 4.5 V ↔ 5.5 V, tr = tf = 5.0 μs
VIN [V]
VOUT [V]
28
3.1
3.0
2.9
2.8
2.7
2.6
2.5
2.4
2.3
20 40 60 80 100 120 140
t [μs]
IOUT = 1 mA, CIN = CL = 0.1 μF, VIN = 4.5 V ↔ 5.5 V, tr = tf = 5.0 μs
4.1
4.0
3.9
3.8
3.7
3.6
3.5
3.4
3.3
VIN
IOUT = 100 mA, CIN = CL = 0.1 μF, VIN = 3.5 V ↔ 4.5 V, tr = tf = 5.0 μs
VIN [V]
VOUT [V]
1. 3
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
VOUT = 2.5 V
IOUT = 1 mA, CIN = CL = 0.1 μF, VIN = 3.5 V ↔ 4.5 V, tr = tf = 5.0 μs
3.1
3.0
2.9
2.8
2.7
2.6
2.5
2.4
2.3
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
VIN [V]
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
VOUT [V]
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
IOUT = 100 mA, CIN = CL = 0.1 μF, VIN = 2.0 V ↔ 3.0 V, tr = tf = 5.0 μs
VIN [V]
VOUT [V]
IOUT = 1 mA, CIN = CL = 0.1 μF, VIN = 2.0 V ↔ 3.0 V, tr = tf = 5.0 μs
VIN [V]
1. 1
4.1
4.0
3.9
3.8
3.7
3.6
3.5
3.4
3.3
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
VIN
VOUT
−40 −20 0
20 40 60 80 100 120 140
t [μs]
VIN [V]
1.
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Transient response characteristics of load (Ta = +25°C)
VOUT = 1.0 V
VIN = 2.0 V, CIN = CL = 0.1 μF, IOUT = 50 mA ↔ 100 mA
2.6
50
2.2
1.8
1.4
1.0
IOUT
0
−50
VOUT
−100
0.6
0.2
−200 −100 0
2. 2
100 200 300 400 500 600
t [μs]
1.0
0.2
−100 −50
0
50 100 150 200 250 300
t [μs]
−150
VIN = 3.5 V, CIN = CL = 0.1 μF, IOUT = 50 mA ↔ 100 mA
3.7
50
3.4
IOUT
0
−50
VOUT
−100
VOUT [V]
100
2.5
−50
VOUT = 2.5 V
4.3
3.1
0
−100
−200
4.9
3.7
50
VOUT
−150
IOUT [mA]
VOUT [V]
1.4
100
IOUT
0.6
VIN = 3.5 V, CIN = CL = 0.1 μF, IOUT = 1 mA ↔ 50 mA
3.1
2.8
2.5
150
IOUT
VOUT
100
50
0
−50
−100
1.9
−150
2.2
1.3
−200
−150
1.9
−200−100 0 100 200 300 400 500 600 700
t [μs]
2. 3
−0.4 −0.2 0 0.2 0.4 0.6 0.8
t [ms]
1 1.2 1.4
VOUT = 3.5 V
VIN = 4.5 V, CIN = CL = 0.1 μF, IOUT = 1 mA ↔ 50 mA
VIN = 4.5 V, CIN = CL = 0.1 μF, IOUT = 50 mA ↔ 100 mA
100
4.7
5.6
50
4.4
4.9
4.2
3.5
IOUT
0
−50
VOUT
−100
2.8
2.1
−0.4 −0.2 0 0.2 0.4 0.6 0.8
t [ms]
1 1.2 1.4
VOUT [V]
6.3
IOUT [mA]
VOUT [V]
1.8
150
IOUT [mA]
100
2.2
VOUT [V]
2.6
IOUT [mA]
VOUT [V]
VIN = 2.0 V, CIN = CL = 0.1 μF, IOUT = 1 mA ↔ 50 mA
IOUT [mA]
2. 1
4.1
3.8
3.5
150
IOUT
VOUT
100
50
0
−50
IOUT [mA]
2.
−100
−150
3.2
−200
−150
2.9
−200−100 0 100 200 300 400 500 600 700
t [μs]
29
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Transient response characteristics of ON / OFF pin (Ta = +25°C)
VOUT = 1.0 V
2.0
0
VOUT
1.0
2.5
2
−2
0.5
−4
0
3. 2
−100
0
100
200
t [μs]
300
400
0
−6
−8
−0.5
100
200
t [μs]
300
400
−8
2
4
0
VOUT
2
−2
−200
0
200
400
t [μs]
600
800
1000
6
VON / OFF
8
4
6
−6
−2
0
VOUT
2
0
4
2
4
−4
−2
−4
−200
0
200
400
t [μs]
600
800
1000
−6
VOUT = 3.5 V
VIN = 4.5 V, CIN = CL = 0.1 μF, IOUT = 100 mA, VON / OFF = 0 V → 4.5 V, tr = 1.0 μs
VON / OFF
VOUT
−200
0
200
400
t [μs]
600
800
1000
8
6
4
2
0
−2
−4
−6
−8
VON / OFF [V]
VIN = 4.5 V, CIN = CL = 0.1 μF, IOUT = 1 mA, VON / OFF = 0 V → 4.5 V, tr = 1.0 μs
VOUT [V]
0
10
VON / OFF [V]
VOUT [V]
6
0
30
−100
VIN = 3.5 V, CIN = CL = 0.1 μF, IOUT = 100 mA, VON / OFF = 0 V → 3.5 V, tr = 1.0 μs
6
VON / OFF
8
14
12
10
8
6
4
2
0
−2
−2
VOUT = 2.5 V
10
3. 3
0
VOUT
1.0
−6
VIN = 3.5 V, CIN = CL = 0.1 μF, IOUT = 1 mA, VON / OFF = 0 V → 3.5 V, tr = 1.0 μs
−2
1.5
2
−4
VOUT [V]
−0.5
4
VON / OFF
0.5
VOUT [V]
VOUT [V]
1.5
4
VOUT [V]
VON / OFF
2.0
VON / OFF [V]
2.5
VIN = 2.0 V, CIN = CL = 0.1 μF, IOUT = 100 mA, VON / OFF = 0 V → 2 V, tr = 1.0 μs
VON / OFF [V]
VIN = 2.0 V, CIN = CL = 0.1 μF, IOUT = 1 mA, VON / OFF = 0 V → 2 V, tr = 1.0 μs
VON / OFF [V]
3. 1
14
12
10
8
6
4
2
0
−2
VON / OFF
VOUT
−200
0
200
400
t [μs]
600
800
1000
8
6
4
2
0
−2
−4
−6
−8
VON / OFF [V]
3.
Rev.2.2_00
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Output capacitance vs. Characteristics of discharge time (Ta = +25°C)
4.
tDSC [ms]
VIN = VOUT + 1.0 V, IOUT = no load,
VON / OFF = VOUT + 1.0 V → VSS, tf = 1 μs
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
1 μs
VON / OFF
VOUT(S) = 1.0 V
VOUT(S) = 2.5 V
VOUT(S) = 3.5 V
VSS
tDSC
VOUT
0
2
4
6
CL [μF]
8
10
12
VOUT × 10%
VIN = VOUT + 1.0 V
VON / OFF = VOUT + 1.0 V → VSS
Figure 22 S-1313 Series A / B type
(with discharge shunt function)
5.
Figure 23
Measurement Condition of Discharge Time
Ripple rejection (Ta = +25°C)
5. 1
VOUT = 1.0 V
5. 2
VOUT = 2.5 V
100
90
80
70
60
50
40
30
20
10
0
IOUT = 1 mA
IOUT = 30 mA
IOUT = 100 mA
10
5. 3
100
1k
10k
100k
Frequency [Hz]
VIN = 3.5 V, CL = 0.1 μF
Ripple Rejection [dB]
Ripple Rejection [dB]
VIN = 2.0 V, CL = 0.1 μF
1M
100
90
80
70
60
50
40
30
20
10
0
IOUT = 1 mA
IOUT = 30 mA
IOUT = 100 mA
IOUT = 200 mA
10
100
1k
10k
100k
Frequency [Hz]
1M
VOUT = 3.5 V
Ripple Rejection [dB]
VIN = 4.5 V, CL = 0.1 μF
100
90
80
70
60
50
40
30
20
10
0
IOUT = 1 mA
IOUT = 30 mA
IOUT = 100 mA
IOUT = 200 mA
10
100
1k
10k
100k
Frequency [Hz]
1M
31
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
6.
Rev.2.2_00
Example of equivalent series resistance vs. Output current characteristics (Ta = +25°C)
CIN = CL = 0.1 μF
100
RESR [Ω]
VIN
VOUT
CIN
Stable
ON / OFF
0
0.01
S-1313 Series
VSS
240
CL
*1
RESR
IOUT [mA]
*1.
Figure 24
32
CL: Murata Manufacturing Co., Ltd. GRM31CR72E104K (0.1 μF)
Figure 25
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
Marking Specifications
1.
SOT-23-5
Top view
5
(1) to (3):
(4):
4
Product code (Refer to Product name vs. Product code)
Lot number
(1) (2) (3) (4)
1
2
3
Product name vs. Product code
1. 1
S-1313 Series A type
Product Name
S-1313A10-M5T1U3
S-1313A11-M5T1U3
S-1313A12-M5T1U3
S-1313A13-M5T1U3
S-1313A14-M5T1U3
S-1313A15-M5T1U3
S-1313A16-M5T1U3
S-1313A17-M5T1U3
S-1313A18-M5T1U3
S-1313A1J-M5T1U3
S-1313A19-M5T1U3
S-1313A20-M5T1U3
S-1313A21-M5T1U3
S-1313A22-M5T1U3
S-1313A23-M5T1U3
S-1313A24-M5T1U3
S-1313A25-M5T1U3
S-1313A26-M5T1U3
S-1313A27-M5T1U3
S-1313A28-M5T1U3
S-1313A2J-M5T1U3
S-1313A29-M5T1U3
S-1313A30-M5T1U3
S-1313A31-M5T1U3
S-1313A32-M5T1U3
S-1313A33-M5T1U3
S-1313A34-M5T1U3
S-1313A35-M5T1U3
1. 2
Product Code
(1)
(2)
(3)
1
L
A
1
L
B
1
L
C
1
L
D
1
L
E
1
L
F
1
L
G
1
L
H
1
L
J
1
L
K
1
L
L
1
L
N
1
L
O
1
L
P
1
L
Q
1
L
R
1
L
S
1
L
T
1
L
V
1
L
U
1
L
X
1
L
Y
1
L
Z
1
L
1
1
L
2
1
L
3
1
L
4
1
L
5
S-1313 Series B type
Product Name
S-1313B10-M5T1U3
S-1313B11-M5T1U3
S-1313B12-M5T1U3
S-1313B13-M5T1U3
S-1313B14-M5T1U3
S-1313B15-M5T1U3
S-1313B16-M5T1U3
S-1313B17-M5T1U3
S-1313B18-M5T1U3
S-1313B1J-M5T1U3
S-1313B19-M5T1U3
S-1313B20-M5T1U3
S-1313B21-M5T1U3
S-1313B22-M5T1U3
S-1313B23-M5T1U3
S-1313B24-M5T1U3
S-1313B25-M5T1U3
S-1313B26-M5T1U3
S-1313B27-M5T1U3
S-1313B28-M5T1U3
S-1313B2J-M5T1U3
S-1313B29-M5T1U3
S-1313B30-M5T1U3
S-1313B31-M5T1U3
S-1313B32-M5T1U3
S-1313B33-M5T1U3
S-1313B34-M5T1U3
S-1313B35-M5T1U3
Product Code
(1)
(2)
(3)
1
N
A
1
N
B
1
N
C
1
N
D
1
N
E
1
N
F
1
N
G
1
N
H
1
N
J
1
N
K
1
N
L
1
N
N
1
N
O
1
N
P
1
N
Q
1
N
R
1
N
S
1
N
T
1
N
U
1
N
V
1
N
X
1
N
Y
1
N
Z
1
N
1
1
N
2
1
N
3
1
N
4
1
N
5
33
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
1. 3
S-1313 Series C type
Product Name
S-1313C10-M5T1U3
S-1313C11-M5T1U3
S-1313C12-M5T1U3
S-1313C13-M5T1U3
S-1313C14-M5T1U3
S-1313C15-M5T1U3
S-1313C16-M5T1U3
S-1313C17-M5T1U3
S-1313C18-M5T1U3
S-1313C1J-M5T1U3
S-1313C19-M5T1U3
S-1313C20-M5T1U3
S-1313C21-M5T1U3
S-1313C22-M5T1U3
S-1313C23-M5T1U3
S-1313C24-M5T1U3
S-1313C25-M5T1U3
S-1313C26-M5T1U3
S-1313C27-M5T1U3
S-1313C28-M5T1U3
S-1313C2J-M5T1U3
S-1313C29-M5T1U3
S-1313C30-M5T1U3
S-1313C31-M5T1U3
S-1313C32-M5T1U3
S-1313C33-M5T1U3
S-1313C34-M5T1U3
S-1313C35-M5T1U3
34
Rev.2.2_00
1. 4
Product Code
(1)
(2)
(3)
1
O
A
1
O
B
1
O
C
1
O
D
1
O
E
1
O
F
1
O
G
1
O
H
1
O
J
1
O
K
1
O
L
1
O
N
1
O
O
1
O
P
1
O
Q
1
O
R
1
O
S
1
O
T
1
O
U
1
O
V
1
O
X
1
O
Y
1
O
Z
1
O
1
1
O
2
1
O
3
1
O
4
1
O
5
S-1313 Series D type
Product Name
S-1313D10-M5T1U3
S-1313D11-M5T1U3
S-1313D12-M5T1U3
S-1313D13-M5T1U3
S-1313D14-M5T1U3
S-1313D15-M5T1U3
S-1313D16-M5T1U3
S-1313D17-M5T1U3
S-1313D18-M5T1U3
S-1313D1J-M5T1U3
S-1313D19-M5T1U3
S-1313D20-M5T1U3
S-1313D21-M5T1U3
S-1313D22-M5T1U3
S-1313D23-M5T1U3
S-1313D24-M5T1U3
S-1313D25-M5T1U3
S-1313D26-M5T1U3
S-1313D27-M5T1U3
S-1313D28-M5T1U3
S-1313D2J-M5T1U3
S-1313D29-M5T1U3
S-1313D30-M5T1U3
S-1313D31-M5T1U3
S-1313D32-M5T1U3
S-1313D33-M5T1U3
S-1313D34-M5T1U3
S-1313D35-M5T1U3
Product Code
(1)
(2)
(3)
1
P
A
1
P
B
1
P
C
1
P
D
1
P
E
1
P
F
1
P
G
1
P
H
1
P
J
1
P
K
1
P
L
1
P
N
1
P
O
1
P
P
1
P
Q
1
P
R
1
P
S
1
P
T
1
P
U
1
P
V
1
P
X
1
P
Y
1
P
Z
1
P
1
1
P
2
1
P
3
1
P
4
1
P
5
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
2.
SC-82AB
Top view
4
(1) to (3):
3
Product code (Refer to Product name vs. Product code)
(1) (2) (3)
1
2
Product name vs. Product code
2. 1
S-1313 Series A type
Product Name
S-1313A10-N4T1U3
S-1313A11-N4T1U3
S-1313A12-N4T1U3
S-1313A13-N4T1U3
S-1313A14-N4T1U3
S-1313A15-N4T1U3
S-1313A16-N4T1U3
S-1313A17-N4T1U3
S-1313A18-N4T1U3
S-1313A1J-N4T1U3
S-1313A19-N4T1U3
S-1313A20-N4T1U3
S-1313A21-N4T1U3
S-1313A22-N4T1U3
S-1313A23-N4T1U3
S-1313A24-N4T1U3
S-1313A25-N4T1U3
S-1313A26-N4T1U3
S-1313A27-N4T1U3
S-1313A28-N4T1U3
S-1313A2J-N4T1U3
S-1313A29-N4T1U3
S-1313A30-N4T1U3
S-1313A31-N4T1U3
S-1313A32-N4T1U3
S-1313A33-N4T1U3
S-1313A34-N4T1U3
S-1313A35-N4T1U3
2. 2
Product Code
(1)
(2)
(3)
1
L
A
1
L
B
1
L
C
1
L
D
1
L
E
1
L
F
1
L
G
1
L
H
1
L
J
1
L
K
1
L
L
1
L
N
1
L
O
1
L
P
1
L
Q
1
L
R
1
L
S
1
L
T
1
L
V
1
L
U
1
L
X
1
L
Y
1
L
Z
1
L
1
1
L
2
1
L
3
1
L
4
1
L
5
S-1313 Series B type
Product Name
S-1313B10-N4T1U3
S-1313B11-N4T1U3
S-1313B12-N4T1U3
S-1313B13-N4T1U3
S-1313B14-N4T1U3
S-1313B15-N4T1U3
S-1313B16-N4T1U3
S-1313B17-N4T1U3
S-1313B18-N4T1U3
S-1313B1J-N4T1U3
S-1313B19-N4T1U3
S-1313B20-N4T1U3
S-1313B21-N4T1U3
S-1313B22-N4T1U3
S-1313B23-N4T1U3
S-1313B24-N4T1U3
S-1313B25-N4T1U3
S-1313B26-N4T1U3
S-1313B27-N4T1U3
S-1313B28-N4T1U3
S-1313B2J-N4T1U3
S-1313B29-N4T1U3
S-1313B30-N4T1U3
S-1313B31-N4T1U3
S-1313B32-N4T1U3
S-1313B33-N4T1U3
S-1313B34-N4T1U3
S-1313B35-N4T1U3
Product Code
(1)
(2)
(3)
1
N
A
1
N
B
1
N
C
1
N
D
1
N
E
1
N
F
1
N
G
1
N
H
1
N
J
1
N
K
1
N
L
1
N
N
1
N
O
1
N
P
1
N
Q
1
N
R
1
N
S
1
N
T
1
N
U
1
N
V
1
N
X
1
N
Y
1
N
Z
1
N
1
1
N
2
1
N
3
1
N
4
1
N
5
35
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
2. 3
S-1313 Series C type
Product Name
S-1313C10-N4T1U3
S-1313C11-N4T1U3
S-1313C12-N4T1U3
S-1313C13-N4T1U3
S-1313C14-N4T1U3
S-1313C15-N4T1U3
S-1313C16-N4T1U3
S-1313C17-N4T1U3
S-1313C18-N4T1U3
S-1313C1J-N4T1U3
S-1313C19-N4T1U3
S-1313C20-N4T1U3
S-1313C21-N4T1U3
S-1313C22-N4T1U3
S-1313C23-N4T1U3
S-1313C24-N4T1U3
S-1313C25-N4T1U3
S-1313C26-N4T1U3
S-1313C27-N4T1U3
S-1313C28-N4T1U3
S-1313C2J-N4T1U3
S-1313C29-N4T1U3
S-1313C30-N4T1U3
S-1313C31-N4T1U3
S-1313C32-N4T1U3
S-1313C33-N4T1U3
S-1313C34-N4T1U3
S-1313C35-N4T1U3
36
Rev.2.2_00
2. 4
Product Code
(1)
(2)
(3)
1
O
A
1
O
B
1
O
C
1
O
D
1
O
E
1
O
F
1
O
G
1
O
H
1
O
J
1
O
K
1
O
L
1
O
N
1
O
O
1
O
P
1
O
Q
1
O
R
1
O
S
1
O
T
1
O
U
1
O
V
1
O
X
1
O
Y
1
O
Z
1
O
1
1
O
2
1
O
3
1
O
4
1
O
5
S-1313 Series D type
Product Name
S-1313D10-N4T1U3
S-1313D11-N4T1U3
S-1313D12-N4T1U3
S-1313D13-N4T1U3
S-1313D14-N4T1U3
S-1313D15-N4T1U3
S-1313D16-N4T1U3
S-1313D17-N4T1U3
S-1313D18-N4T1U3
S-1313D1J-N4T1U3
S-1313D19-N4T1U3
S-1313D20-N4T1U3
S-1313D21-N4T1U3
S-1313D22-N4T1U3
S-1313D23-N4T1U3
S-1313D24-N4T1U3
S-1313D25-N4T1U3
S-1313D26-N4T1U3
S-1313D27-N4T1U3
S-1313D28-N4T1U3
S-1313D2J-N4T1U3
S-1313D29-N4T1U3
S-1313D30-N4T1U3
S-1313D31-N4T1U3
S-1313D32-N4T1U3
S-1313D33-N4T1U3
S-1313D34-N4T1U3
S-1313D35-N4T1U3
Product Code
(1)
(2)
(3)
1
P
A
1
P
B
1
P
C
1
P
D
1
P
E
1
P
F
1
P
G
1
P
H
1
P
J
1
P
K
1
P
L
1
P
N
1
P
O
1
P
P
1
P
Q
1
P
R
1
P
S
1
P
T
1
P
U
1
P
V
1
P
X
1
P
Y
1
P
Z
1
P
1
1
P
2
1
P
3
1
P
4
1
P
5
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
3.
HSNT-4 (1010)
Top view
4
(1) to (3):
(4), (5):
3
Product code (Refer to Product name vs. Product code)
Lot number
(1) (2) (3)
(4) (5)
1
2
Product name vs. Product code
3. 1
S-1313 Series A type
Product Name
S-1313A10-A4T2U3
S-1313A11-A4T2U3
S-1313A12-A4T2U3
S-1313A13-A4T2U3
S-1313A14-A4T2U3
S-1313A15-A4T2U3
S-1313A16-A4T2U3
S-1313A17-A4T2U3
S-1313A18-A4T2U3
S-1313A1J-A4T2U3
S-1313A19-A4T2U3
S-1313A20-A4T2U3
S-1313A21-A4T2U3
S-1313A22-A4T2U3
S-1313A23-A4T2U3
S-1313A24-A4T2U3
S-1313A25-A4T2U3
S-1313A26-A4T2U3
S-1313A27-A4T2U3
S-1313A28-A4T2U3
S-1313A2J-A4T2U3
S-1313A29-A4T2U3
S-1313A30-A4T2U3
S-1313A31-A4T2U3
S-1313A32-A4T2U3
S-1313A33-A4T2U3
S-1313A34-A4T2U3
S-1313A35-A4T2U3
3. 2
Product Code
(1)
(2)
(3)
1
L
A
1
L
B
1
L
C
1
L
D
1
L
E
1
L
F
1
L
G
1
L
H
1
L
J
1
L
K
1
L
L
1
L
N
1
L
O
1
L
P
1
L
Q
1
L
R
1
L
S
1
L
T
1
L
V
1
L
U
1
L
X
1
L
Y
1
L
Z
1
L
1
1
L
2
1
L
3
1
L
4
1
L
5
S-1313 Series B type
Product Name
S-1313B10-A4T2U3
S-1313B11-A4T2U3
S-1313B12-A4T2U3
S-1313B13-A4T2U3
S-1313B14-A4T2U3
S-1313B15-A4T2U3
S-1313B16-A4T2U3
S-1313B17-A4T2U3
S-1313B18-A4T2U3
S-1313B1J-A4T2U3
S-1313B19-A4T2U3
S-1313B20-A4T2U3
S-1313B21-A4T2U3
S-1313B22-A4T2U3
S-1313B23-A4T2U3
S-1313B24-A4T2U3
S-1313B25-A4T2U3
S-1313B26-A4T2U3
S-1313B27-A4T2U3
S-1313B28-A4T2U3
S-1313B2J-A4T2U3
S-1313B29-A4T2U3
S-1313B30-A4T2U3
S-1313B31-A4T2U3
S-1313B32-A4T2U3
S-1313B33-A4T2U3
S-1313B34-A4T2U3
S-1313B35-A4T2U3
Product Code
(1)
(2)
(3)
1
N
A
1
N
B
1
N
C
1
N
D
1
N
E
1
N
F
1
N
G
1
N
H
1
N
J
1
N
K
1
N
L
1
N
N
1
N
O
1
N
P
1
N
Q
1
N
R
1
N
S
1
N
T
1
N
U
1
N
V
1
N
X
1
N
Y
1
N
Z
1
N
1
1
N
2
1
N
3
1
N
4
1
N
5
37
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
3. 3
S-1313 Series C type
Product Name
S-1313C10-A4T2U3
S-1313C11-A4T2U3
S-1313C12-A4T2U3
S-1313C13-A4T2U3
S-1313C14-A4T2U3
S-1313C15-A4T2U3
S-1313C16-A4T2U3
S-1313C17-A4T2U3
S-1313C18-A4T2U3
S-1313C1J-A4T2U3
S-1313C19-A4T2U3
S-1313C20-A4T2U3
S-1313C21-A4T2U3
S-1313C22-A4T2U3
S-1313C23-A4T2U3
S-1313C24-A4T2U3
S-1313C25-A4T2U3
S-1313C26-A4T2U3
S-1313C27-A4T2U3
S-1313C28-A4T2U3
S-1313C2J-A4T2U3
S-1313C29-A4T2U3
S-1313C30-A4T2U3
S-1313C31-A4T2U3
S-1313C32-A4T2U3
S-1313C33-A4T2U3
S-1313C34-A4T2U3
S-1313C35-A4T2U3
38
Rev.2.2_00
3. 4
Product Code
(1)
(2)
(3)
1
O
A
1
O
B
1
O
C
1
O
D
1
O
E
1
O
F
1
O
G
1
O
H
1
O
J
1
O
K
1
O
L
1
O
N
1
O
O
1
O
P
1
O
Q
1
O
R
1
O
S
1
O
T
1
O
U
1
O
V
1
O
X
1
O
Y
1
O
Z
1
O
1
1
O
2
1
O
3
1
O
4
1
O
5
S-1313 Series D type
Product Name
S-1313D10-A4T2U3
S-1313D11-A4T2U3
S-1313D12-A4T2U3
S-1313D13-A4T2U3
S-1313D14-A4T2U3
S-1313D15-A4T2U3
S-1313D16-A4T2U3
S-1313D17-A4T2U3
S-1313D18-A4T2U3
S-1313D1J-A4T2U3
S-1313D19-A4T2U3
S-1313D20-A4T2U3
S-1313D21-A4T2U3
S-1313D22-A4T2U3
S-1313D23-A4T2U3
S-1313D24-A4T2U3
S-1313D25-A4T2U3
S-1313D26-A4T2U3
S-1313D27-A4T2U3
S-1313D28-A4T2U3
S-1313D2J-A4T2U3
S-1313D29-A4T2U3
S-1313D30-A4T2U3
S-1313D31-A4T2U3
S-1313D32-A4T2U3
S-1313D33-A4T2U3
S-1313D34-A4T2U3
S-1313D35-A4T2U3
Product Code
(1)
(2)
(3)
1
P
A
1
P
B
1
P
C
1
P
D
1
P
E
1
P
F
1
P
G
1
P
H
1
P
J
1
P
K
1
P
L
1
P
N
1
P
O
1
P
P
1
P
Q
1
P
R
1
P
S
1
P
T
1
P
U
1
P
V
1
P
X
1
P
Y
1
P
Z
1
P
1
1
P
2
1
P
3
1
P
4
1
P
5
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
Rev.2.2_00
4.
HSNT-4 (0808)
Top view
4
(1) to (3):
3
Product code (Refer to Product name vs. Product code)
(1) (2) (3)
1
2
Product name vs. Product code
4. 1
S-1313 Series A type
Product Name
S-1313A10-A4T1U3
S-1313A11-A4T1U3
S-1313A12-A4T1U3
S-1313A13-A4T1U3
S-1313A14-A4T1U3
S-1313A15-A4T1U3
S-1313A16-A4T1U3
S-1313A17-A4T1U3
S-1313A18-A4T1U3
S-1313A1J-A4T1U3
S-1313A19-A4T1U3
S-1313A20-A4T1U3
S-1313A21-A4T1U3
S-1313A22-A4T1U3
S-1313A23-A4T1U3
S-1313A24-A4T1U3
S-1313A25-A4T1U3
S-1313A26-A4T1U3
S-1313A27-A4T1U3
S-1313A28-A4T1U3
S-1313A2J-A4T1U3
S-1313A29-A4T1U3
S-1313A30-A4T1U3
S-1313A31-A4T1U3
S-1313A32-A4T1U3
S-1313A33-A4T1U3
S-1313A34-A4T1U3
S-1313A35-A4T1U3
4. 2
Product Code
(1)
(2)
(3)
1
L
A
1
L
B
1
L
C
1
L
D
1
L
E
1
L
F
1
L
G
1
L
H
1
L
J
1
L
K
1
L
L
1
L
N
1
L
O
1
L
P
1
L
Q
1
L
R
1
L
S
1
L
T
1
L
V
1
L
U
1
L
X
1
L
Y
1
L
Z
1
L
1
1
L
2
1
L
3
1
L
4
1
L
5
S-1313 Series B type
Product Name
S-1313B10-A4T1U3
S-1313B11-A4T1U3
S-1313B12-A4T1U3
S-1313B13-A4T1U3
S-1313B14-A4T1U3
S-1313B15-A4T1U3
S-1313B16-A4T1U3
S-1313B17-A4T1U3
S-1313B18-A4T1U3
S-1313B1J-A4T1U3
S-1313B19-A4T1U3
S-1313B20-A4T1U3
S-1313B21-A4T1U3
S-1313B22-A4T1U3
S-1313B23-A4T1U3
S-1313B24-A4T1U3
S-1313B25-A4T1U3
S-1313B26-A4T1U3
S-1313B27-A4T1U3
S-1313B28-A4T1U3
S-1313B2J-A4T1U3
S-1313B29-A4T1U3
S-1313B30-A4T1U3
S-1313B31-A4T1U3
S-1313B32-A4T1U3
S-1313B33-A4T1U3
S-1313B34-A4T1U3
S-1313B35-A4T1U3
Product Code
(1)
(2)
(3)
1
N
A
1
N
B
1
N
C
1
N
D
1
N
E
1
N
F
1
N
G
1
N
H
1
N
J
1
N
K
1
N
L
1
N
N
1
N
O
1
N
P
1
N
Q
1
N
R
1
N
S
1
N
T
1
N
U
1
N
V
1
N
X
1
N
Y
1
N
Z
1
N
1
1
N
2
1
N
3
1
N
4
1
N
5
39
5.5 V INPUT, 200 mA VOLTAGE REGULATOR
S-1313 Series
4. 3
S-1313 Series C type
Product Name
S-1313C10-A4T1U3
S-1313C11-A4T1U3
S-1313C12-A4T1U3
S-1313C13-A4T1U3
S-1313C14-A4T1U3
S-1313C15-A4T1U3
S-1313C16-A4T1U3
S-1313C17-A4T1U3
S-1313C18-A4T1U3
S-1313C1J-A4T1U3
S-1313C19-A4T1U3
S-1313C20-A4T1U3
S-1313C21-A4T1U3
S-1313C22-A4T1U3
S-1313C23-A4T1U3
S-1313C24-A4T1U3
S-1313C25-A4T1U3
S-1313C26-A4T1U3
S-1313C27-A4T1U3
S-1313C28-A4T1U3
S-1313C2J-A4T1U3
S-1313C29-A4T1U3
S-1313C30-A4T1U3
S-1313C31-A4T1U3
S-1313C32-A4T1U3
S-1313C33-A4T1U3
S-1313C34-A4T1U3
S-1313C35-A4T1U3
40
Rev.2.2_00
4. 4
Product Code
(1)
(2)
(3)
1
O
A
1
O
B
1
O
C
1
O
D
1
O
E
1
O
F
1
O
G
1
O
H
1
O
J
1
O
K
1
O
L
1
O
N
1
O
O
1
O
P
1
O
Q
1
O
R
1
O
S
1
O
T
1
O
U
1
O
V
1
O
X
1
O
Y
1
O
Z
1
O
1
1
O
2
1
O
3
1
O
4
1
O
5
S-1313 Series D type
Product Name
S-1313D10-A4T1U3
S-1313D11-A4T1U3
S-1313D12-A4T1U3
S-1313D13-A4T1U3
S-1313D14-A4T1U3
S-1313D15-A4T1U3
S-1313D16-A4T1U3
S-1313D17-A4T1U3
S-1313D18-A4T1U3
S-1313D1J-A4T1U3
S-1313D19-A4T1U3
S-1313D20-A4T1U3
S-1313D21-A4T1U3
S-1313D22-A4T1U3
S-1313D23-A4T1U3
S-1313D24-A4T1U3
S-1313D25-A4T1U3
S-1313D26-A4T1U3
S-1313D27-A4T1U3
S-1313D28-A4T1U3
S-1313D2J-A4T1U3
S-1313D29-A4T1U3
S-1313D30-A4T1U3
S-1313D31-A4T1U3
S-1313D32-A4T1U3
S-1313D33-A4T1U3
S-1313D34-A4T1U3
S-1313D35-A4T1U3
Product Code
(1)
(2)
(3)
1
P
A
1
P
B
1
P
C
1
P
D
1
P
E
1
P
F
1
P
G
1
P
H
1
P
J
1
P
K
1
P
L
1
P
N
1
P
O
1
P
P
1
P
Q
1
P
R
1
P
S
1
P
T
1
P
U
1
P
V
1
P
X
1
P
Y
1
P
Z
1
P
1
1
P
2
1
P
3
1
P
4
1
P
5
2.9±0.2
1.9±0.2
4
5
1
2
+0.1
0.16 -0.06
3
0.95±0.1
0.4±0.1
No. MP005-A-P-SD-1.3
TITLE
SOT235-A-PKG Dimensions
No.
MP005-A-P-SD-1.3
ANGLE
UNIT
mm
ABLIC Inc.
4.0±0.1(10 pitches:40.0±0.2)
+0.1
ø1.5 -0
+0.2
ø1.0 -0
2.0±0.05
0.25±0.1
4.0±0.1
1.4±0.2
3.2±0.2
3 2 1
4
5
Feed direction
No. MP005-A-C-SD-2.1
TITLE
SOT235-A-Carrier Tape
No.
MP005-A-C-SD-2.1
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. MP005-A-R-SD-1.1
SOT235-A-Reel
TITLE
No.
MP005-A-R-SD-1.1
ANGLE
QTY.
UNIT
mm
ABLIC Inc.
3,000
2.0±0.2
1.3±0.2
4
3
0.05
0.3
+0.1
-0.05
+0.1
0.16 -0.06
2
1
+0.1
0.4 -0.05
No. NP004-A-P-SD-2.0
TITLE
SC82AB-A-PKG Dimensions
NP004-A-P-SD-2.0
No.
ANGLE
UNIT
mm
ABLIC Inc.
+0.1
ø1.5 -0
4.0±0.1
2.0±0.05
1.1±0.1
4.0±0.1
0.2±0.05
ø1.05±0.1
(0.7)
2.2±0.2
2
1
3
4
Feed direction
No. NP004-A-C-SD-3.0
TITLE
SC82AB-A-Carrier Tape
No.
NP004-A-C-SD-3.0
ANGLE
UNIT
mm
ABLIC Inc.
4.0±0.1
2.0±0.1
ø1.5
1.1±0.1
+0.1
-0
4.0±0.1
0.2±0.05
ø1.05±0.1
2.3±0.15
2
1
3
4
Feed direction
No. NP004-A-C-S1-2.0
TITLE
SC82AB-A-Carrier Tape
No.
NP004-A-C-S1-2.0
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. NP004-A-R-SD-1.1
TITLE
SC82AB-A-Reel
No.
NP004-A-R-SD-1.1
QTY.
ANGLE
UNIT
mm
ABLIC Inc.
3,000
0.38±0.02
0.65
3
4
1
2
1.00±0.04
0.20±0.05
+0.05
0.08 -0.02
The heat sink of back side has different electric
potential depending on the product.
Confirm specifications of each product.
Do not use it as the function of electrode.
No. PL004-A-P-SD-1.1
TITLE
HSNT-4-B-PKG Dimensions
No.
PL004-A-P-SD-1.1
ANGLE
UNIT
mm
ABLIC Inc.
2.0±0.05
+0.1
ø1.5 -0
4.0±0.05
0.25±0.05
+0.1
1.12±0.05
2
1
3
4
ø0.5 -0
2.0±0.05
0.5±0.05
Feed direction
No. PL004-A-C-SD-2.0
TITLE
HSNT-4-B-C a r r i e r Tape
No.
PL004-A-C-SD-2.0
ANGLE
UNIT
mm
ABLIC Inc.
+1.0
9.0 - 0.0
11.4±1.0
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. PL004-A-R-SD-1.0
HSNT-4-B-Reel
TITLE
PL004-A-R-SD-1.0
No.
QTY.
ANGLE
UNIT
mm
ABLIC Inc.
10,000
Land Pattern
0.30min.
0.38~0.48
0.38~0.48
0.07
0.65±0.02
(1.02)
Caution It is recommended to solder the heat sink to a board
in order to ensure the heat radiation.
PKG
Metal Mask Pattern
Aperture ratio
Aperture ratio
Caution
Mask aperture ratio of the lead mounting part is 100%.
Mask aperture ratio of the heat sink mounting part is 40%.
Mask thickness: t0.10mm to 0.12 mm
100%
40%
t0.10mm ~ 0.12 mm
TITLE
No. PL004-A-L-SD-2.0
HSNT-4-B
-Land Recommendation
PL004-A-L-SD-2.0
No.
ANGLE
UNIT
mm
ABLIC Inc.
0.38±0.02
0.40
3
4
1
2
0.80±0.04
0.20±0.05
+0.05
0.08 -0.02
The heat sink of back side has different electric
potential depending on the product.
Confirm specifications of each product.
Do not use it as the function of electrode.
No. PK004-A-P-SD-2.1
TITLE
HSNT-4-A-PKG Dimensions
No.
PK004-A-P-SD-2.1
ANGLE
UNIT
mm
ABLIC Inc.
2.0±0.05
+0.1
ø1.5 -0
4.0±0.05
ø0.5 +0.1
-0
0.25±0.05
2.0±0.05
0.5±0.05
0.93±0.05
2
1
3
4
Feed direction
No. PK004-A-C-SD-3.0
TITLE
HSNT-4-A-C a r r i e r Tape
No.
PK004-A-C-SD-3.0
ANGLE
UNIT
mm
ABLIC Inc.
+1.0
9.0 - 0.0
11.4±1.0
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. PK004-A-R-SD-2.0
TITLE
HSNT-4-A-Reel
No.
PK004-A-R-SD-2.0
ANGLE
UNIT
QTY.
mm
ABLIC Inc.
10,000
Land Pattern
0.22min.
0.27~0.32
0.27~0.32
0.05
0.40±0.02
(0.82)
Caution It is recommended to solder the heat sink to a board
in order to ensure the heat radiation.
PKG
Metal Mask Pattern
Aperture ratio
Aperture ratio
Caution
Mask aperture ratio of the lead mounting part is 100%.
Mask aperture ratio of the heat sink mounting part is 40%.
Mask thickness: t0.10mm to 0.12 mm
100%
40%
t0.10mm ~ 0.12 mm
TITLE
HSNT-4-A
-Land Recommendation
PK004-A-L-SD-3.0
No.
No. PK004-A-L-SD-3.0
ANGLE
UNIT
mm
ABLIC Inc.
Disclaimers (Handling Precautions)
1.
All the information described herein (product data, specifications, figures, tables, programs, algorithms and
application circuit examples, etc.) is current as of publishing date of this document and is subject to change without
notice.
2.
The circuit examples and the usages described herein are for reference only, and do not guarantee the success of
any specific mass-production design.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the reasons other than the products
described herein (hereinafter "the products") or infringement of third-party intellectual property right and any other
right due to the use of the information described herein.
3.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the incorrect information described
herein.
4.
Be careful to use the products within their ranges described herein. Pay special attention for use to the absolute
maximum ratings, operation voltage range and electrical characteristics, etc.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by failures and / or accidents, etc. due to
the use of the products outside their specified ranges.
5.
Before using the products, confirm their applications, and the laws and regulations of the region or country where they
are used and verify suitability, safety and other factors for the intended use.
6.
When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related
laws, and follow the required procedures.
7.
The products are strictly prohibited from using, providing or exporting for the purposes of the development of
weapons of mass destruction or military use. ABLIC Inc. is not liable for any losses, damages, claims or demands
caused by any provision or export to the person or entity who intends to develop, manufacture, use or store nuclear,
biological or chemical weapons or missiles, or use any other military purposes.
8.
The products are not designed to be used as part of any device or equipment that may affect the human body, human
life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control
systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment,
aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses by
ABLIC, Inc. Do not apply the products to the above listed devices and equipments.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by unauthorized or unspecified use of
the products.
9.
In general, semiconductor products may fail or malfunction with some probability. The user of the products should
therefore take responsibility to give thorough consideration to safety design including redundancy, fire spread
prevention measures, and malfunction prevention to prevent accidents causing injury or death, fires and social
damage, etc. that may ensue from the products' failure or malfunction.
The entire system in which the products are used must be sufficiently evaluated and judged whether the products are
allowed to apply for the system on customer's own responsibility.
10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the
product design by the customer depending on the intended use.
11. The products do not affect human health under normal use. However, they contain chemical substances and heavy
metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be
careful when handling these with the bare hands to prevent injuries, etc.
12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used.
13. The information described herein contains copyright information and know-how of ABLIC Inc. The information
described herein does not convey any license under any intellectual property rights or any other rights belonging to
ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any part of this
document described herein for the purpose of disclosing it to a third-party is strictly prohibited without the express
permission of ABLIC Inc.
14. For more details on the information described herein or any other questions, please contact ABLIC Inc.'s sales
representative.
15. This Disclaimers have been delivered in a text using the Japanese language, which text, despite any translations into
the English language and the Chinese language, shall be controlling.
2.4-2019.07
www.ablic.com
工商网监
湘ICP备2023018690号
