Rev.2.2_00
MINI LOGIC SERIES 2 INPUT NAND GATE
S-75V00ANC
The S-75V00ANC is a single 2-Input NAND Gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC’s. All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications.
Features
• • • • • • • Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 2 V to 5.5 V 1.0 µA max. (at 5.5 V, 25°C) tPD = 3.7 ns (at 5 V) VNIH=VNIL=28% VCC min. All pins SC-88A
Applications
• • • • Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
IN B 1 2 3 (Top view) 4 OUT Y 5 VCC
Marking Specification
5 4 Product code
IN A GND
5V1
1 2 (Top view) 3
Logic Diagram
True Values
IN B IN A
OUT Y
A L L H H
B L H L H
Y H H H L
Seiko Instruments Inc.
1
MINI LOGIC SERIES 2 INPUT NAND GATE S-75V00ANC Ordering
Delivery form: Model name: Taping only S-75V00ANC-5V1-TFG
Rev.2.2_00
Absolute Maximum Ratings
Ta=25°C Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +7.0 -0.5 to +7.0 -0.5 to VCC+0.5 -20 ±20 ±25 ±50 200 (When not mounted on board) 350*1 -40 to +85 -65 to +150 260 Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
2
Seiko Instruments Inc.
Rev.2.2_00 Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Input Rise and Fall Time Symbol VCC VIN VOUT dt/dv
MINI LOGIC SERIES 2 INPUT NAND GATE S-75V00ANC
Standard 2 to 5.5 0 to 5.5 0 to VCC 0 to 100 (VCC=3.3±0.3 V) 0 to 20 (VCC=5±0. 5 V)
Unit V V V ns/V
DC Characteristics
Parameter Symbol Conditions VCC Input Voltage "H" level "L" level VIH VIL 2.0 3 to 5.5 2.0 3 to 5.5 2.0 VIN=VIL "H" level Output Voltage IOL=50 µA "L" level VOL VIN=VIH IOL=4 mA IOL=8 mA Input Current Current Consump. IIN ICC VIN=5.5 V or GND VIN=VCC or GND VOH or VIH IOH=-4 mA IOH=-8 mA IOH=-50 µA 3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 MIN. 1.5 VCCX0.7 1.9 2.9 4.4 2.58 3.94 Ta=25°C TYP. 2.0 3.0 4.5 0 0 0 MAX. 0.5 VCCX0.3 0.1 0.1 0.1 0.36 0.36 ±0.1 1.0 Ta=-40 to 85°C MIN. 1.5 VCCX0.7 1.9 2.9 4.4 2.48 3.80 MAX. 0.5 VCCX0.3 0.1 0.1 0.1 0.44 0.44 ±1.0 10.0 µA µA V V Unit
Seiko Instruments Inc.
3
MINI LOGIC SERIES 2 INPUT NAND GATE S-75V00ANC AC Characteristics
Rev.2.2_00
Input tr = tf = 3 ns (unless otherwise specified)
Parameter Symbol Measurement Conditions VCC(V) 3.3±0.3 CL(pF) 15 50 15 50 MIN.
Ta=25°C TYP. 5.5 10.0 3.7 6.1 4 14 MAX. 7.9 14.0 5.5 8.5 10
Ta=-40 to 85°C MIN. 1.0 1.0 1.0 1.0 MAX. 9.5 15.0 6.5 9.0 10
Unit
Propagation Delay Time
tPLH, tPHL
5.0±0.5
ns
Input Capacitance CIN pF Equiv. Int. Capacitance CPD*1 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit
3 ns 90%
3 ns VCC
VIN
50% GND tPLH
PG
VIN
VOUT tPHL
10%
50 Ω
CL VOUT 50%
VOH
50% VOL
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Input pin
4
Seiko Instruments Inc.
Rev.2.2_00
MINI LOGIC SERIES 2 INPUT NOR GATE
S-75V02ANC
The S-75V02ANC is a single 2-intput NOR gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC’s. All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications.
Features
• • • • • • •
Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 2 V to 5.5 V 1.0 µA max. (at 5.5 V, 25°C) tPD = 3.6 ns (at 5 V) VNIH=VNIL=28% VCC min. All pins SC-88A
Applications
• • • •
Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
IN B IN A GND 1 2 3 4 OUT Y 5 VCC
Marking Specification
5 4 Product code
5V3
1 (Top view) 2 (Top view) 3
Logic Diagram
True Values
IN B IN A OUT Y
A L L H H
B L H L H
Y H L L L
Seiko Instruments Inc.
5
MINI LOGIC SERIES 2 INPUT NOR GATE S-75V02ANC Ordering
Delivery form: Model name: Taping only S-75V02ANC-5V3-TFG
Rev.2.2_00
Absolute Maximum Ratings
Ta=25°C Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +7.0 -0.5 to +7.0 -0.5 to VCC+0.5 -20 ±20 ±25 ±50 200 (When not mounted on board) 350*1 -40 to +85 -65 to +150 260 Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
6
Seiko Instruments Inc.
Rev.2.2_00 Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Input Rise and Fall Time Symbol VCC VIN VOUT dt/dv
MINI LOGIC SERIES 2 INPUT NOR GATE S-75V02ANC
Standard 2 to 5.5 0 to 5.5 0 to VCC 0 to 100 (VCC=3.3±0.3 V) 0 to 20 (VCC=5±0. 5 V)
Unit V V V ns/V
DC Characteristics
Parameter Symbol Conditions VCC Input Voltage "H" level "L" level VIH VIL 2.0 3 to 5.5 2.0 3 to 5.5 2.0 IOH=-50 µA "H" level Output Voltage VIN=VIH "L" level VOL or VIL IOL=4 mA IOL=8 mA Input Current Current Consump. IIN ICC VIN=5.5 V or GND VIN=VCC or GND IOL=50 µA VOH VIN=VIL IOH=-4 mA IOH=-8 mA 3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 MIN. 1.5 VCCX0.7 1.9 2.9 4.4 2.58 3.94 Ta=25°C TYP. 2.0 3.0 4.5 0 0 0 MAX. 0.5 VCCX0.3 0.1 0.1 0.1 0.36 0.36 ±0.1 1.0 Ta=-40 to 85°C MIN. 1.5 VCCX0.7 1.9 2.9 4.4 2.48 3.80 MAX. 0.5 VCCX0.3 0.1 0.1 0.1 0.44 0.44 ±1.0 10.0 µA µA V V Unit
Seiko Instruments Inc.
7
MINI LOGIC SERIES 2 INPUT NOR GATE S-75V02ANC AC Characteristics
Rev.2.2_00
Input tr = tf = 3 ns (unless otherwise specified)
Parameter Symbol Measurement Conditions VCC(V) 3.3±0.3 CL(pF) 15 50 15 50 MIN.
Ta=25°C TYP. 5.6 10.0 3.6 5.7 4 15 MAX. 7.9 14.0 5.5 8.0 10
Ta=-40 to 85°C MIN. 1.0 1.0 1.0 1.0 MAX. 9.5 15.0 6.5 9.0 10
Unit
Propagation Delay Time
tPLH, tPHL
5.0±0.5
ns
Input Capacitance CIN pF Equiv. Int. Capacitance CPD*1 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit
3 ns
3 ns VCC 50% GND tPLH
VIN
VOUT
PG
50 Ω CL
VIN tPHL
90% 10%
VOH
VOUT
50%
50% VOL
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Input pin
8
Seiko Instruments Inc.
Rev.2.2_00
MINI LOGIC SERIES INVERTER
S-75V04ANC
The S-75V04ANC is a INVERTER fabricated by utilizing advanced silicongate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC’s. The special purpose unbuffered circuit design is suitable for a wide veriety of linear circuits. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications.
Features
• • • • • • • Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 2 V to 5.5 V 1.0 µA max. (at 5.5 V, 25°C) tPD = 3.8 ns (at 5 V) VNIH=VNIL=28% VCC min. All pins SC-88A
Applications
• • • • Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
NC IN A GND 1 2 3 4 OUT Y 5 VCC 5
Marking Specification
4 Product code
5V5
1 2 (Top view) 3
(Top view)
Logic Diagram
True Values A L H Y H L
IN A
OUT Y
Seiko Instruments Inc.
9
MINI LOGIC SERIES INVERTER S-75V04ANC Ordering
Delivery form: Model name: Taping only S-75V04ANC-5V5-TFG
Rev.2.2_00
Absolute Maximum Ratings
Ta=25°C Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +7.0 -0.5 to +7.0 -0.5 to VCC+0.5 -20 ±20 ±25 ±50 200 (When not mounted on board) *1 350 -40 to +85 -65 to +150 260 Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
10
Seiko Instruments Inc.
Rev.2.2_00 Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Input Rise and Fall Time Symbol VCC VIN VOUT dt/dv
MINI LOGIC SERIES INVERTER S-75V04ANC
Standard 2 to 5.5 0 to 5.5 0 to VCC 0 to 100 (VCC=3.3±0.3 V) 0 to 20 (VCC=5±0.5 V)
Unit V V V ns/V
DC Characteristics
Parameter Symbol Conditions VCC Input Voltage "H" level "L" level VIH VIL 2.0 3 to 5.5 2.0 3 to 5.5 2.0 IOH=-50 µA "H" level Output Voltage IOL=50 µA "L" level VOL VIN=VIH IOL=4 mA IOL=8 mA Input Current Current Consump. IIN ICC VIN=5.5 V or GND VIN=VCC or GND VOH VIN=VIL IOH=-4 mA IOH=-8 mA 3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 MIN. 1.5 VCCX0.7 1.9 2.9 4.4 2.58 3.94 Ta=25°C TYP. 2.0 3.0 4.5 0 0 0 MAX. 0.5 VCCX0.3 0.1 0.1 0.1 0.36 0.36 ±0.1 1.0 Ta=-40 to 85°C MIN. 1.5 VCCX0.7 1.9 2.9 4.4 2.48 3.80 MAX. 0.5 VCCX0.3 0.1 0.1 0.1 0.44 0.44 ±1.0 10.0 µA µA V V Unit
Seiko Instruments Inc.
11
MINI LOGIC SERIES INVERTER S-75V04ANC AC Characteristics
Rev.2.2_00
Input tr = tf = 3 ns (unless otherwise specified)
Parameter Symbol Measurement Conditions VCC(V) 3.3±0.3 CL(pF) 15 50 15 50 MIN.
Ta=25°C TYP. 5.0 9.6 3.8 5.7 4 13 MAX. 7.1 13.5 5.5 8.0 10
Ta=-40 to 85°C MIN. 1.0 1.0 1.0 1.0 MAX. 8.5 14.5 6.5 9.0 10
Unit
Propagation Delay Time
tPLH, tPHL
5.0±0.5
ns
Input Capacitance CIN pF Equiv. Int. Capacitance CPD*1 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit 3 ns 3 ns VCC 50% GND tPLH VOUT 50% 50% VOL
Remark No-load output during measurement of current consumption.
PG
VIN
VOUT
VIN tPHL
90% 10%
50 Ω
CL
VOH
Input pin Equivalent Circuit
Input pin
12
Seiko Instruments Inc.
Rev.2.2_00
MINI LOGIC SERIES INVERTER (unbuffer)
S-75VU04ANC
The S-75VU04ANC is a inverter fabricated by utilizing advanced silicongate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC’s. The special purpose unbuffered circuit design is suitable for a wide variety of linear circuits. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications.
Features
• • • • • • • Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 2 V to 5.5 V 1.0 µA max. (at 5.5 V, 25°C) tPD = 3.5 ns (at 5 V) VNIH=VNIL=10% VCC min. All pins SC-88A
Applications
• • • • Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
5
Marking Specification
4 Product code
NC IN A GND
1 2 3
5
VCC
5V6
4 OUT Y 1 2 (Top view) 3
(Top view)
Logic Diagram
True Values A L H Y H L
IN A
OUT Y
Seiko Instruments Inc.
13
MINI LOGIC SERIES INVERTER (unbuffer) S-75VU04ANC Ordering
Delivery form: Model name: Taping only S-75VU04ANC-5V6TFG
Rev.2.2_00
Absolute Maximum Ratings
Ta=25°C Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +7.0 -0.5 to +7.0 -0.5 to VCC+0.5 -20 ±20 ±25 ±50 200 (When not mounted on board) 350*1 -40 to +85 -65 to +150 260 Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
14
Seiko Instruments Inc.
Rev.2.2_00 Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Symbol VCC VIN VOUT
MINI LOGIC SERIES INVERTER (unbuffer) S-75VU04ANC
Standard 2 to 5.5 0 to 5.5 0 to VCC
Unit V V V
DC Characteristics
Parameter Symbol Conditions VCC Input Voltage "H" level "L" level VIH VIL VOUT=VOL VOUT=VOH 2.0 3 to 5.5 2.0 3 to 5.5 2.0 VIN=VIL "H" level Output Voltage VIN=VIH "L" level VOL VIN= VCC Input Current Current Consump. IIN ICC IOL=4 mA IOL=8 mA VIN=5.5 V or GND VIN=VCC or GND IOL=50 µA VOH VIN= GND IOH=-4 mA IOH=-8 mA IOH=-50 µA 3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 MIN. 1.7 VCCX0.8 1.8 2.7 4.0 2.58 3.94 Ta=25°C TYP. 2.0 3.0 4.5 0 0 0 MAX. 0.3 VCCX0.2 0.2 0.3 0.5 0.36 0.36 ±0.1 1.0 Ta=-40 to 85°C MIN. 1.7 VCCX0.8 1.8 2.7 4.0 2.48 3.80 MAX. 0.3 VCCX0.2 0.2 0.3 0.5 0.44 0.44 ±1.0 10.0 µA µA V V Unit
Seiko Instruments Inc.
15
MINI LOGIC SERIES INVERTER (unbuffer) S-75VU04ANC AC Characteristics
Rev.2.2_00
Input tr = tf = 3 ns (unless otherwise specified)
Parameter Symbol Measurement Conditions VCC(V) 3.3±0.3 CL(pF) 15 50 15 50 MIN.
Ta=25°C TYP. 5.0 8.9 3.5 5.4 5 6 MAX. 8.9 12.5 5.5 7.5 10
Ta=-40 to 85°C MIN. 1.0 1.0 1.0 1.0 MAX. 10.5 13.5 6.5 8.0 10
Unit
Propagation Delay Time
tPLH, tPHL
5.0±0.5
ns
Input Capacitance CIN pF Equiv. Int. Capacitance CPD*1 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit
3 ns 3 ns VCC 50% GND tPLH VOUT 50% 50% VOL
Remark No-load output during measurement of current consumption.
90%
PG
VIN
VOUT
VIN tPHL
10%
50 Ω
CL
VOH
Input Pin Equivalent Circuit
Input pin
16
Seiko Instruments Inc.
Rev.2.2_00
MINI LOGIC SERIES 2 INPUT AND GATE
S-75V08ANC
The S-75V08ANC is a Single 2-Input AND Gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC’s. All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications.
Features
• • • • • • • Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 2 V to 5.5 V 1.0 µA max. (at 5.5 V, 25°C) tPD = 4.3 ns (at 5 V) VNIH=VNIL=28% VCC min. All pins SC-88A
Applications
• • • • Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
IN B 1 2 3 4 OUT Y 5 VCC 5
Marking Specification
4 Product code
IN A GND
5V2
1 2 (Top view) 3
(Top view)
Logic Diagram
True Values
IN B IN A
OUT Y
A L L H H
B L H L H
Y L L L H
Seiko Instruments Inc.
17
MINI LOGIC SERIES 2 INPUT AND GATE S-75V08ANC Ordering
Delivery form: Model name: Taping only S-75V08ANC-5V2-TFG
Rev.2.2_00
Absolute Maximum Ratings
Ta=25°C Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +7.0 -0.5 to +7.0 -0.5 to VCC+0.5 -20 ±20 ±25 ±50 200 (When not mounted on board) *1 350 -40 to +85 -65 to +150 260 Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
18
Seiko Instruments Inc.
Rev.2.2_00 Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Input Rise and Fall Time Symbol VCC VIN VOUT dt/dv
MINI LOGIC SERIES 2 INPUT AND GATE S-75V08ANC
Standard 2 to 5.5 0 to 5.5 0 to VCC 0 to 100 (VCC=3.3±0.3 V) 0 to 20 (VCC=5±0. 5 V)
Unit V V V ns/V
DC Characteristics
Parameter Symbol Conditions VCC Input Voltage "H" level "L" level VIH VIL 2.0 3 to 5.5 2.0 3 to 5.5 2.0 IOH=-50 µA "H" level Output Voltage IOL=50 µA "L" level VOL VIN=VIH or VIL Input Current Current Consump. IIN ICC IOL=4 mA IOL=8 mA VIN=5.5 V or GND VIN=VCC or GND VOH VIN=VIH IOH=-4 mA IOH=-8 mA 3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 MIN. 1.5 VCCX0.7 1.9 2.9 4.4 2.58 3.94 Ta=25°C TYP. 2.0 3.0 4.5 0 0 0 MAX. 0.5 VCCX0.3 0.1 0.1 0.1 0.36 0.36 ±0.1 1.0 Ta=-40 to 85°C MIN. 1.5 VCCX0.7 1.9 2.9 4.4 2.48 3.80 MAX. 0.5 VCCX0.3 0.1 0.1 0.1 0.44 0.44 ±1.0 10.0 µA µA V V Unit
Seiko Instruments Inc.
19
MINI LOGIC SERIES 2 INPUT AND GATE S-75V08ANC AC Characteristics
Rev.2.2_00
Input tr = tf = 3 ns (unless otherwise specified)
Parameter Symbol Measurement Conditions VCC(V) 3.3±0.3 CL(pF) 15 50 15 50 MIN.
Ta=25°C TYP. 6.2 9.6 4.3 5.7 4 14 MAX. 8.8 13.5 5.9 7.9 10
Ta=-40 to 85°C MIN. 1.0 1.0 1.0 1.0 MAX. 10.5 14.5 7.0 9.0 10
Unit
Propagation Delay Time
tPLH, tPHL
5.0±0.5
ns
Input Capacitance CIN pF Equiv. Int. Capacitance CPD*1 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit 3 ns 90% VIN 3 ns VCC 50% GND tPHL VOH VOUT 50% 50% VOL
Remark No-load output during measurement of current consumption.
PG
50 Ω
VIN
VOUT tPLH CL
10%
Input Pin Equivalent Circuit
Input pin
20
Seiko Instruments Inc.
Rev.2.2_00
MINI LOGIC SERIES SCHMITT INVERTER
S-75V14ANC
The S-75V14ANC is a SCHMITT INVERTER fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC’s. All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications.
Features
• • • • • • • Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 2 V to 5.5 V 1.0 µA max. (at 5.5 V, 25°C) tPD = 5.5 ns (at 5 V) VNIH=VNIL=28% VCC min. All pins SC-88A
Applications
• • • • Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
Marking Specification
5 4 Product code
NC IN A GND
1 2 3
5
VCC
5VA
4 OUT Y 1 2 (Top view) 3
(Top view)
Logic Diagram
True Values A L H B H L
IN A
OUT Y
Seiko Instruments Inc.
21
MINI LOGIC SERIES SCHMITT INVERTER S-75V14ANC Ordering
Delivery form: Model name: Taping only S-75V14ANC-5VA-TFG
Rev.2.2_00
Absolute Maximum Ratings
Ta=25°C Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +7.0 -0.5 to +7.0 -0.5 to VCC+0.5 -20 ±20 ±25 ±50 200(When not mounted on board) *1 350 -40 to +85 -65 to +150 260 Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
22
Seiko Instruments Inc.
Rev.2.2_00 Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Symbol VCC VIN VOUT
MINI LOGIC SERIES SCHMITT INVERTER S-75V14ANC
Standard 2 to 5.5 0 to 5.5 0 to VCC
Unit V V V
DC Characteristics
Parameter Symbol Conditions VCC 3.0 "H" level Threshold Voltage "L" level VN VP 4.5 5.5 3.0 4.5 5.5 3.0 Hysteresis VH 4.5 5.5 2.0 IOH=-50 µA "H" level Output Voltage IOL=50 µA "L" level VOL VIN=VIH IOL=4 mA IOL=8 mA Input Current Current Consump. IIN ICC VIN=5.5 V or GND VIN=VCC or GND VOH VIN=VIL IOH=-4 mA IOH=-8 mA 3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 MIN. 0.90 1.35 1.65 0.30 0.40 0.5 1.9 2.9 4.4 2.58 3.94 Ta=25°C TYP. 2.0 3.0 4.5 0 0 0 MAX. 2.20 3.15 3.85 1.20 1.40 1.60 0.1 0.1 0.1 0.36 0.36 ±0.1 1.0 Ta=-40 to 85°C MIN. 0.90 1.35 1.65 0.30 0.40 0.5 1.9 2.9 4.4 2.48 3.80 MAX. 2.20 3.15 3.85 1.20 1.40 1.60 0.1 0.1 0.1 0.44 0.44 ±1.0 10.0 µA µA V V V Unit
Seiko Instruments Inc.
23
MINI LOGIC SERIES SCHMITT INVERTER S-75V14ANC AC Characteristics
Rev.2.2_00
Input tr = tf = 3 ns (unless otherwise specified)
Parameter Symbol Measurement Conditions VCC(V) 3.3±0.3 CL(pF) 15 50 15 50 MIN.
Ta=25°C TYP. 8.3 10.8 5.5 7.0 4 14 MAX. 12.8 16.3 8.6 10.6 10
Ta=-40 to 85°C MIN. 1.0 1.0 1.0 1.0 MAX. 15.0 18.5 10.0 12.0 10
Unit
Propagation Delay Time
tPLH, tPHL
5.0±0.5
ns
Input Capacitance CIN pF Equiv. Int. Capacitance CPD*1 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit
3 ns
3 ns VCC
VIN
90% 10% tPHL
50% GND tPLH
PG
50 Ω
VIN
VOUT
CL VOUT 50%
VOH
50% VOL
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Input pin
24
Seiko Instruments Inc.
Rev.2.2_00
MINI LOGIC SERIES 2 INPUT OR GATE
S-75V32ANC
The S-75V32ANC is a single 2-intput OR gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC’s. All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications.
Features
• • • • • • • Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 2 V to 5.5 V 1.0 µA max. (at 5.5 V, 25°C) tPD = 3.8 ns (at 5 V) VNIH=VNIL=28% VCC min. All pins SC-88A
Applications
• • • • Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
IN B IN A 1 2 3 4 OUT Y 1 (Top view) 5 VCC 5
Marking Specification
4 Product code
5V4
2 (Top view) 3
GND
Logic Diagram
True Values A L L H H B L H L H Y L H H H
IN B IN A
OUT Y
Seiko Instruments Inc.
25
MINI LOGIC SERIES 2 INPUT OR GATE S-75V32ANC Ordering
Delivery form: Model name: Taping only S-75V32ANC-5V4-TFG
Rev.2.2_00
Absolute Maximum Ratings
Ta=25°C Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +7.0 -0.5 to +7.0 -0.5 to VCC+0.5 -20 ±20 ±25 ±50 200 (When not mounted on board) 350*1 -40 to +85 -65 to +150 260 Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
26
Seiko Instruments Inc.
Rev.2.2_00 Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Input Rise and Fall Time Symbol VCC VIN VOUT dt/dv
MINI LOGIC SERIES 2 INPUT OR GATE S-75V32ANC
Standard 2 to 5.5 0 to 5.5 0 to VCC 0 to 100 (VCC=3.3±0.3 V) 0 to 20 (VCC=5±0. 5 V)
Unit V V V ns/V
DC Characteristics
Parameter Symbol Conditions VCC Input Voltage "H" level "L" level VIH VIL 2.0 3 to 5.5 2.0 3 to 5.5 2.0 VIN=VIL "H" level Output Voltage IOL=50 µA "L" level VOL VIN=VIL IOL=4 mA IOL=8 mA Input Current Current Consump. IIN ICC VIN=5.5 V or GND VIN=VCC or GND VOH or VIH IOH=-4 mA IOH=-8 mA IOH=-50 µA 3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 MIN. 1.5 VCCX0.7 1.9 2.9 4.4 2.58 3.94 Ta=25°C TYP. 2.0 3.0 4.5 0 0 0 MAX. 0.5 VCCX0.3 0.1 0.1 0.1 0.36 0.36 ±0.1 1.0 Ta=-40 to 85°C MIN. 1.5 VCCX0.7 1.9 2.9 4.4 2.48 3.80 MAX. 0.5 VCCX0.3 0.1 0.1 0.1 0.44 0.44 ±1.0 10.0 µA µA V V Unit
Seiko Instruments Inc.
27
MINI LOGIC SERIES 2 INPUT OR GATE S-75V32ANC AC Characteristics
Rev.2.2_00
Input tr = tf = 3 ns (unless otherwise specified)
Parameter Symbol Measurement Conditions VCC(V) 3.3±0.3 CL(pF) 15 50 15 50 MIN.
Ta=25°C TYP. 5.5 10.0 3.8 6.1 4 15 MAX. 7.9 14.0 5.5 8.5 10
Ta=-40 to 85°C MIN. 1.0 1.0 1.0 1.0 MAX. 9.5 15.0 6.5 9.0 10
Unit
Propagation Delay Time
tPLH, tPHL
5.0±0.5
ns
Input Capacitance CIN pF Equiv. Int. Capacitance CPD*1 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit
3 ns 90% VIN VOUT tPLH 50 Ω tPHL CL VOUT 50% 50% VOL
Remark No-load output during measurement of current consumption.
3 ns VCC
VIN
50% GND
PG
10%
VOH
Input Pin Equivalent Circuit
Input pin
28
Seiko Instruments Inc.
Rev.2.2_00
MINI LOGIC SERIES EXCLUSIVE OR GATE
S-75V86ANC
The S-75V86ANC is a EXCLUSIVE OR GATE fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC’s. All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications.
Features
• • • • • • •
Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 2 V to 5.5 V 1.0 µA max. (at 5.5 V, 25°C) tPD = 4.8 ns (at 5 V) VNIH=VNIL=28% VCC min. All pins SC-88A
Applications
• • • •
Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
Marking Specification
IN B IN A GND
5 1 2 3 4 OUT Y 5 VCC
4 Product code
5V8
1 2 (Top view) 3
(Top view)
Logic Diagram
True Values A L L H H B L H L H Y L H H L
IN B IN A
OUT Y
Seiko Instruments Inc.
29
MINI LOGIC SERIES EXCLUSIVE OR GATE S-75V86ANC Ordering
Delivery form: Model name: Taping only S-75V86ANC-5V8-TFG
Rev.2.2_00
Absolute Maximum Ratings
Ta=25°C Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +7.0 -0.5 to +7.0 -0.5 to VCC+0.5 -20 ±20 ±25 ±50 200 (When not mounted on board) *1 350 -40 to +85 -65 to +150 260 Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
30
Seiko Instruments Inc.
Rev.2.2_00 Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Symbol VCC VIN VOUT
MINI LOGIC SERIES EXCLUSIVE OR GATE S-75V86ANC
Standard 2 to 5.5 0 to 5.5 0 to VCC 0 to 100 (VCC=3.3±0.3 V) 0 to 20 (VCC=5±0. 5 V)
Unit V V V
Input Rise and Fall Time
dt/dv
ns/V
DC Characteristics
Parameter Symbol Conditions VCC Input Voltage "H" level "L" level VIH VIL 2.0 3 to 5.5 2.0 3 to 5.5 2.0 VIN=VIL "H" level Output Voltage VIN=VIL "L" level VOL or VIH IOL=4 mA IOL=8 mA Input Current Current Consump. IIN ICC VIN=5.5 V or GND VIN=VCC or GND IOL=50 µA VOH or VIH IOH=-4 mA IOH=-8 mA IOH=-50 µA 3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5 MIN. 1.5 VCCX0.7 1.9 2.9 4.4 2.58 3.94 Ta=25°C TYP. 2.0 3.0 4.5 0 0 0 MAX. 0.5 VCCX0.3 0.1 0.1 0.1 0.36 0.36 ±0.1 1.0 Ta=-40 to 85°C MIN. 1.5 VCCX0.7 1.9 2.9 4.4 2.48 3.80 MAX. 0.5 VCCX0.3 0.1 0.1 0.1 0.44 0.44 ±1.0 10.0 µA µA V V Unit
Seiko Instruments Inc.
31
MINI LOGIC SERIES EXCLUSIVE OR GATE S-75V86ANC AC Characteristics
Rev.2.2_00
Input tr = tf = 3 ns (unless otherwise specified)
Parameter Symbol Measurement Conditions VCC(V) 3.3±0.3 CL(pF) 15 50 15 50 MIN.
Ta=25°C TYP. 7.0 10.4 4.8 6.5 4 18 MAX. 11.0 14.5 6.8 9.0 10
Ta=-40 to 85°C MIN. 1.0 1.0 1.0 1.0 MAX. 13.0 16.5 8.0 10.0 10
Unit
Propagation Delay Time
tPLH, tPHL
5.0±0.5
ns
Input Capacitance CIN pF Equiv. Int. Capacitance CPD*1 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit
3 ns 90% 10% tPLH
3 ns VCC
VIN
VIN VOUT
50% GND tPHL
PG
50 Ω
CL VOUT 50% 50%
VOH
VOL
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Input pin
32
Seiko Instruments Inc.
Rev.2.2_00
MINI LOGIC SERIES 2 INPUT NAND GATE
S-75L00ANC
The S-75L00ANC is a single 2-intput NAND gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The internal circuitry has buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications.
Features
• • • • • • • Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 1 V to 3.6 V 1.0 µA max. (at 3.6 V, 25°C) tPD = 7 ns (at 3 V) VNIH=VNIL=28% VCC min. All pins SC-88A
Applications
• • • • Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
IN B 1 2 3 (Top view) 4 OUT Y 5 VCC
Marking Specification
5 4 Product code
IN A GND
5L1
1 2 (Top view) 3
Logic Diagram
True Values
IN B IN A
OUT Y
A L L H H
B L H L H
Y H H H L
Seiko Instruments Inc.
33
MINI LOGIC SERIES 2 INPUT NAND GATE S-75L00ANC Ordering
Delivery form: Model name: Taping only S-75L00ANC-5L1-TFG
Rev.2.2_00
Absolute Maximum Ratings
Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +5.0 -0.5 to +5.0 -0.5 to VCC+0.5 -20 ±20 ±12.5 ±25 200 (When not mounted on board) 350*1 -40 to +85 -65 to +150 260
Ta=25°C Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
34
Seiko Instruments Inc.
Rev.2.2_00 Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Input Rise and Fall Time Symbol VCC VIN VOUT dt/dv
MINI LOGIC SERIES 2 INPUT NAND GATE S-75L00ANC
Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC=1.0 V) 0 to 500 (VCC=2.0 V) 0 to 400 (VCC=3.0 V)
Unit V V V ns
DC Characteristics
Parameter Symbol Conditions VCC 1.0 "H" level Input Voltage "L" level VIL VIH 1.5 3.0 1.0 1.5 3.0 1.0 VIN=VIH "H" level Output Voltage IOL=20 µA "L" level VOL VIN=VIH IOL=1 mA IOL=2.6 mA Input Current Current Consump. IIN ICC VIN=VCC or GND VIN=VCC or GND VOH or VIL IOH=-1 mA IOH=-2.6 mA IOH=-20 µA 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 3.6 3.6 MIN. 0.75 1.05 2.10 0.9 1.4 2.9 1.07 2.61 Ta=25°C TYP. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 MAX. 0.25 0.45 0.90 0.1 0.1 0.1 0.31 0.31 ±0.1 1.0 Ta=-40 to 85°C MIN. 0.75 1.05 2.10 0.9 1.4 2.9 0.99 2.55 MAX. 0.25 0.45 0.90 0.1 0.1 0.1 0.37 0.33 ±1.0 10.0 µA µA V V Unit
Seiko Instruments Inc.
35
MINI LOGIC SERIES 2 INPUT NAND GATE S-75L00ANC AC Characteristics
Rev.2.2_00
CL=15 pf, Input tr=tf=6 ns, VCC=3.3±0.3 V, Ta=25°C (unless otherwise specified) Parameter Symbol tTLH, tTHL tPLH, tPHL Measurement Conditions
MIN.
TYP. 4.0 6.0
MAX. 8.5 9.0
Unit
Output Rise/Fall Time Propagation Delay Time
ns
CL=25 pf, Input tr=tf=6 ns (unless otherwise specified) Parameter Symbol Measurement Conditions VCC(V) 1.0 1.5 3.0 1.0 1.5 3.0 Min. Ta=25°C Typ. 35 15 7 30 15 7 5 10 Max. 70 25 10 60 25 10 10 Ta=-40 to 85°C Min. Max. 90 30 14 75 30 14 10 Unit
Output Rise/Fall Time
tTLH, tTHL tPLH, tPHL
ns
Propagation Delay Time
Input Capacitance CIN pF Equiv.Int. Capacitance CPD*1 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown
below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit 6 ns 90% 10% tPHL 50 Ω CL VOUT 50% tPLH 50% VOL
Remark No-load output during measurement of current consumption.
6 ns VCC
VIN
50% GND
PG
VIN
VOUT
VOH
Input Pin Equivalent Circuit
Input pin
36
Seiko Instruments Inc.
Rev.2.2_00
MINI LOGIC SERIES 2 INPUT NOR GATE
S-75L02ANC
The S-75L02ANC is a single 2-intput NOR gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The internal circuitry has buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications.
Features
• • • • • • • Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 1 V to 3.6 V 1.0 µA max. (at 3.6 V, 25°C) tPD = 7 ns (at 3 V) VNIH=VNIL=28% VCC min. All pins SC-88A
Applications
• • • • Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
IN B IN A GND 1 2 3 4 OUT Y 5 VCC
Marking Specification
5 4 Product code
5L3
1 (Top view) 2 (Top view) 3
Logic Diagram
True Values
IN B IN A OUT Y
A L L H H
B L H L H
Y H L L L
Seiko Instruments Inc.
37
MINI LOGIC SERIES 2 INPUT NOR GATE S-75L02ANC Ordering
Delivery form: Model name: Taping only S-75L02ANC-5L3-TFG
Rev.2.2_00
Absolute Maximum Ratings
Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +5.0 -0.5 to +5.0 -0.5 to VCC+0.5 -20 ±20 ±12.5 ±25 200 (When not mounted on board) 350*1 -40 to +85 -65 to +150 260
Ta=25°C Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
38
Seiko Instruments Inc.
Rev.2.2_00 Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Input Rise and Fall Time Symbol VCC VIN VOUT dt/dv
MINI LOGIC SERIES 2 INPUT NOR GATE S-75L02ANC
Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC=1.0 V) 0 to 500 (VCC=2.0 V) 0 to 400 (VCC=3.0 V)
Unit V V V ns
DC Characteristics
Parameter Symbol Conditions VCC 1.0 "H" level Input Voltage "L" level VIL VIH 1.5 3.0 1.0 1.5 3.0 1.0 VIN=VIL "H" level Output Voltage IOL=20 µA "L" level VOL VIN=VIL or VIH Input Current Current Consump. IIN ICC IOL=1 mA IOL=2.6 mA VIN=VCC or GND VIN=VCC or GND VOH IOH=-1 mA IOH=-2.6 mA IOH=-20 µA 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 3.6 3.6 MIN. 0.75 1.05 2.10 0.9 1.4 2.9 1.07 2.61 Ta=25°C TYP. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 MAX. 0.25 0.45 0.90 0.1 0.1 0.1 0.31 0.31 ±0.1 1.0 Ta=-40 to 85°C MIN. 0.75 1.05 2.10 0.9 1.4 2.9 0.99 2.55 MAX. 0.25 0.45 0.90 0.1 0.1 0.1 0.37 0.33 ±1.0 10.0 µA µA V V Unit
Seiko Instruments Inc.
39
MINI LOGIC SERIES 2 INPUT NOR GATE S-75L02ANC AC Characteristics
Rev.2.2_00
CL=15 pf, Input tr=tf=6 ns, VCC=3.3±0.3 V, Ta=25°C (unless otherwise specified) Parameter Symbol tTLH, tTHL tPLH, tPHL Measurement Conditions
MIN.
TYP. 4.0 6.0
MAX. 8.0 9.0
Unit ns
Output Rise/Fall Time Propagation Delay Time
CL=25 pf, Input tr=tf=6 ns (unless otherwise specified) Parameter Symbol Measurement Conditions VCC(V) 1.0 1.5 3.0 1.0 1.5 3.0 Min. Ta=25°C Typ. 35 15 7 30 15 7 5 10 Max. 70 25 10 60 25 10 10 Ta=-40 to 85°C Min. Max. 90 30 14 75 30 14 10 Unit
Output Rise/Fall Time
tTLH, tTHL tPLH, tPHL
ns
Propagation Delay Time
Input Capacitance CIN pF Equiv. Int. Capacitance CPD*1 pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown
below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit 6 ns 6 ns VCC 50% GND tPLH VOUT 50% 50% VOL
Remark No-load output during measurement of current consumption.
VIN
VOUT
PG
50 Ω CL
VIN tPHL
90% 10%
VOH
Input Pin Equivalent Circuit
Input pin
40
Seiko Instruments Inc.
Rev.2.2_00
MINI LOGIC SERIES INVERTER
S-75L04ANC
The S-75L04ANC is an inverter fabricated by utilizing advanced silicongate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The internal circuitry has buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications.
Features
• • • • • • • Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 1 V to 3.6 V 1.0 µA max. (at 3.6 V, 25°C) tPD = 7 ns (at 3 V) VNIH=VNIL=28% VCC min. All pins SC-88A
Applications
• • • • Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
Marking Specification
5
NC
1
5
VCC
4 Product code
IN A
2
5L5
4 (Top view) (Top view) OUT Y 1 2 3
GND
3
Logic Diagram
True Values A L H Y H L
IN A
OUT Y
Seiko Instruments Inc.
41
MINI LOGIC SERIES INVERTER S-75L04ANC Ordering
Delivery form: Model name: Taping only S-75L04ANC-5L5-TFG
Rev.2.2_00
Absolute Maximum Ratings
Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +5.0 -0.5 to +5.0 -0.5 to VCC+0.5 -20 ±20 ±12.5 ±25 200 (When not mounted on board) 350*1 -40 to +85 -65 to +150 260
Ta=25°C Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Input Rise and Fall Time Symbol VCC VIN VOUT dt/dv Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC=1.0 V) 0 to 500 (VCC=2.0 V) 0 to 400 (VCC=3.0 V) Unit V V V ns
42
Seiko Instruments Inc.
Rev.2.2_00 DC Characteristics
Parameter Symbol Conditions VCC 1.0 "H" level Input Voltage "L" level VIL VIH 1.5 3.0 1.0 1.5 3.0 1.0 VIN=VIL "H" level Output Voltage IOL=20 µA "L" level VOL VIN=VIH IOL=1 mA IOL=2.6 mA Input Current Current Consump. IIN ICC VIN=VCC or GND VIN=VCC or GND VOH IOH=-1 mA IOH=-2.6 mA IOH=-20 µA 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 3.6 3.6 MIN. 0.75 1.05 2.10 0.9 1.4 2.9 1.07 2.61
MINI LOGIC SERIES INVERTER S-75L04ANC
Ta=25°C TYP. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 MAX. 0.25 0.45 0.90 0.1 0.1 0.1 0.31 0.31 ±0.1 1.0
Ta=-40 to 85°C MIN. 0.75 1.05 2.10 0.9 1.4 2.9 0.99 2.55 MAX. 0.25 0.45 0.90 0.1 0.1 0.1 0.37 0.33 ±1.0 10.0
Unit
V
V
µA µA
Seiko Instruments Inc.
43
MINI LOGIC SERIES INVERTER S-75L04ANC AC Characteristics
Rev.2.2_00
CL=15 pf, Input tr=tf=6 ns, VCC=3.3±0.3 V, Ta=25°C (unless otherwise specified) Parameter Symbol tTLH, tTHL tPLH, tPHL Measurement Conditions
MIN.
TYP. 4.0 6.0
MAX. 8.0 9.0
Unit ns
Output Rise/Fall Time Propagation Delay Time
CL=25 pf, Input tr=tf=6 ns (unless otherwise specified) Parameter Symbol Measurement Conditions VCC(V) 1.0 1.5 3.0 1.0 1.5 3.0 Min. Ta=25°C Typ. 35 15 7 30 15 7 5 10 Max. 70 25 10 60 25 10 10 Ta=-40 to 85°C Min. Max. 90 30 14 75 30 14 10 Unit
Output Rise/Fall Time
tTLH, tTHL tPLH, tPHL
ns
Propagation Delay Time
Input Capacitance CIN pF *1 Equiv. Int. Capacitance CPD pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown
below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit 6 ns 6 ns VCC 50% GND tPLH VOUT 50% 50% VOL
Remark No-load output during measurement of current consumption.
PG
50 Ω
VIN
VOUT
VIN tPHL CL
90% 10%
VOH
Input pin Equivalent Circuit
Input pin
44
Seiko Instruments Inc.
Rev.2.2_00
MINI LOGIC SERIES INVERTER (unbuffer)
S-75LU04ANC
The S-75LU04ANC is a single packaged inverter without buffer fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The S-75LU04ANC is suitable for a wide variety of linear circuits. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications.
Features
• • • • • • • Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 1 V to 3.6 V 1.0 µA max. (at 3.6 V, 25°C) tPD = 6 ns (at 3 V) VNIH=VNIL=10% VCC min. All pins SC-88A
Applications
• • • • Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
5
Marking Specification
4 Product code
NC IN A GND
1 2 3
5
VCC
5L6
4 OUT Y 1 2 (Top view) 3
(Top view)
Logic Diagram
True Values A L H Y H L
IN A
OUT Y
Seiko Instruments Inc.
45
MINI LOGIC SERIES INVERTER (unbuffer) S-75LU04ANC Ordering
Delivery form: Model name: Taping only S-75LU04ANC-5L6TFG
Rev.2.2_00
Absolute Maximum Ratings
Ta=25°C Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +5.0 -0.5 to +5.0 -0.5 to VCC+0.5 -20 ±20 ±12.5 ±25 200 (When not mounted on board) *1 350 -40 to +85 -65 to +150 260 Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
46
Seiko Instruments Inc.
Rev.2.2_00 Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Input Rise and Fall Time Symbol VCC VIN VOUT dt/dv
MINI LOGIC SERIES INVERTER (unbuffer) S-75LU04ANC
Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC=1.0 V) 0 to 500 (VCC=2.0 V) 0 to 400 (VCC=3.0 V)
Unit V V V ns
DC Characteristics
Parameter Symbol Conditions VCC 1.0 "H" level Input Voltage "L" level VIL VIH 1.5 3.0 1.0 1.5 3.0 1.0 VIN=VIL "H" level Output Voltage IOL=20 µA "L" level VOL VIN=VIH IOL=1 mA IOL=2.6 mA Input Current Current Consump. IIN ICC VIN=VCC or GND VIN=VCC or GND VOH IOH=-1 mA IOH=-2.6 mA IOH=-20 µA 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 3.6 3.6 MIN. 0.75 1.05 2.10 0.9 1.4 2.9 1.07 2.61 Ta=25°C TYP. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 MAX. 0.25 0.45 0.90 0.1 0.1 0.1 0.31 0.31 ±0.1 1.0 Ta=-40 to 85°C MIN. 0.75 1.05 2.10 0.9 1.4 2.9 0.99 2.55 MAX. 0.25 0.45 0.90 0.1 0.1 0.1 0.37 0.33 ±1.0 10.0 µA µA V V Unit
Seiko Instruments Inc.
47
MINI LOGIC SERIES INVERTER (unbuffer) S-75LU04ANC AC Characteristics
Rev.2.2_00
CL=15 pf, Input tr=tf=6 ns, VCC=3.3±0.3 V, Ta=25°C (unless otherwise specified) Parameter Symbol tTLH, tTHL tPLH, tPHL Measurement Conditions
MIN.
TYP. 6.0 4.0
MAX. 9.0 10.0
Unit ns
Output Rise/Fall Time Propagation Delay Time
CL=25 pf, Input tr=tf=6 ns (unless otherwise specified) Parameter Symbol Measurement Conditions VCC(V) 1.0 1.5 3.0 1.0 1.5 3.0 Min. Ta=25°C Typ. 35 15 7 20 10 6 5 10 Max. 70 25 10 40 15 9 10 Ta=-40 to 85°C Min. Max. 90 30 14 50 20 12 10 Unit
Output Rise/Fall Time
tTLH, tTHL tPLH, tPHL
ns
Propagation Delay Time
Input Capacitance CIN pF *1 Equiv. Int. Capacitance CPD pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown
below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit 6 ns 6 ns VCC 50% GND tPLH VOUT 50% 50% VOL
Remark No-load output during measurement of current consumption.
90%
PG
VIN
VOUT
VIN tPHL
10%
50 Ω
CL
VOH
Input Pin Equivalent Circuit
Input pin
48
Seiko Instruments Inc.
Rev.2.2_00
MINI LOGIC SERIES 2 INPUT AND GATE
S-75L08ANC
The S-75L08ANC is a single 2-Input AND Gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The internal circuitry has buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications.
Features
• • • • • • • Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 1 V to 3.6 V 1.0 µA max. (at 3.6 V, 25°C) tPD = 7 ns (at 3 V) VNIH=VNIL=28% VCC min. All pins SC-88A
Applications
• • • • Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
5
Marking Specification
4 Product code
IN B
1 2 3
5
VCC
IN A GND
5L2
4 OUT Y 1 2 (Top view) 3
(Top view)
Logic Diagram
True Values
IN B IN A
OUT Y
A L L H H
B L H L H
Y L L L H
Seiko Instruments Inc.
49
MINI LOGIC SERIES 2 INPUT AND GATE S-75L08ANC Ordering
Delivery form: Model name: Taping only S-75L08ANC-5L2-TFG
Rev.2.2_00
Absolute Maximum Ratings
Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +5.0 -0.5 to +5.0 -0.5 to VCC+0.5 -20 ±20 ±12.5 ±25 200 (When not mounted on board) 350*1 -40 to +85 -65 to +150 260
Ta=25°C Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
50
Seiko Instruments Inc.
Rev.2.2_00 Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Input Rise and Fall Time Symbol VCC VIN VOUT dt/dv
MINI LOGIC SERIES 2 INPUT AND GATE S-75L08ANC
Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC=1.0 V) 0 to 500 (VCC=2.0 V) 0 to 400 (VCC=3.0 V)
Unit V V V ns
DC Characteristics
Parameter Symbol Conditions VCC 1.0 "H" level Input Voltage "L" level VIL VIH 1.5 3.0 1.0 1.5 3.0 1.0 VIN=VIH "H" level Output Voltage IOL=20 µA "L" level VOL VIN=VIL or VIH Input Current Current Consump. IIN ICC IOL=1 mA IOL=2.6 mA VIN=VCC or GND VIN=VCC or GND VOH IOH=-1 mA IOH=-2.6 mA IOH=-20 µA 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 3.6 3.6 MIN. 0.75 1.05 2.10 0.9 1.4 2.9 1.07 2.61 Ta=25°C TYP. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 MAX. 0.25 0.45 0.90 0.1 0.1 0.1 0.31 0.31 ±0.1 1.0 Ta=-40 to 85°C MIN. 0.75 1.05 2.10 0.9 1.4 2.9 0.99 2.55 MAX. 0.25 0.45 0.90 0.1 0.1 0.1 0.37 0.33 ±1.0 10.0 µA µA V V Unit
Seiko Instruments Inc.
51
MINI LOGIC SERIES 2 INPUT AND GATE S-75L08ANC AC Characteristics
Rev.2.2_00
CL=15 pf, Input tr=tf=6 ns, VCC=3.3±0.3 V, Ta=25°C (unless otherwise specified) Parameter Symbol tTLH, tTHL tPLH, tPHL Measurement Conditions
MIN.
TYP. 4.0 6.0
MAX. 8.0 9.0
Unit ns
Output Rise/Fall Time Propagation Delay Time
CL=25 pf, Input tr=tf=6 ns (unless otherwise specified) Parameter Symbol Measurement Conditions VCC(V) 1.0 1.5 3.0 1.0 1.5 3.0 Min. Ta=25°C Typ. 35 15 7 30 15 7 5 10 Max. 70 25 10 60 25 10 10 Ta=-40 to 85°C Min. Max. 90 30 14 75 30 14 10 Unit
Output Rise/Fall Time
tTLH, tTHL tPLH, tPHL
ns
Propagation Delay Time
Input Capacitance CIN pF *1 Equiv. Int. Capacitance CPD pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown
below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit 6 ns 90% VIN 6 ns VCC 50% GND tPHL VOH VOUT 50% 50% VOL
Remark No-load output during measurement of current consumption.
PG
50 Ω
VIN
VOUT tPLH CL
10%
Input Pin Equivalent Circuit
Input pin
52
Seiko Instruments Inc.
Rev.2.2_00
MINI LOGIC SERIES SCHMITT INVERTER
S-75L14ANC
The S-75L14ANC is a SCHMITT INVERTER fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The internal circuitry has buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications.
Features
• • • • • • • Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 1 V to 3.6 V 1.0 µA max. (at 3.6 V, 25°C) tPD = 8 ns (at 3 V) VNIH=VNIL=28% VCC min. All pins SC-88A
Applications
• • • • Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
Marking Specification
5 4 Product code
NC IN A GND
1 2 3
5
VCC
5LA
4 OUT Y 1 2 (Top view) 3
(Top view)
Logic Diagram
True Values
IN A
OUT Y
A L H
B H L
Seiko Instruments Inc.
53
MINI LOGIC SERIES SCHMITT INVERTER S-75L14ANC Ordering
Delivery form: Model name: Taping only S-75L14ANC-5LA-TFG
Rev.2.2_00
Absolute Maximum Ratings
Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +5.0 -0.5 to +5.0 -0.5 to VCC+0.5 -20 ±20 ±12.5 ±25 200 (When not mounted on board) 350*1 -40 to +85 -65 to +150 260
Ta=25°C Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
54
Seiko Instruments Inc.
Rev.2.2_00 Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Input Rise and Fall Time Symbol VCC VIN VOUT dt/dv
MINI LOGIC SERIES SCHMITT INVERTER S-75L14ANC
Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC=1.0 V) 0 to 500 (VCC=2.0 V) 0 to 400 (VCC=3.0 V)
Unit V V V ns
DC Characteristics
Parameter Symbol Conditions VCC 1.0 "H" level Input Voltage "L" level VIL VIH 1.5 3.0 1.0 1.5 3.0 1.0 IOH=-20 µA "H" level Output Voltage IOL=20 µA "L" level VOL VIN=VIH IOL=1 mA IOL=2.6 mA Hysteresis Voltage Input Current Current Consump. VH IIN ICC VIN=VCC or GND VIN=VCC or GND VOH VIN=VIL IOH=-1 mA IOH=-2.6 mA 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 1.0 1.5 3.0 3.6 3.6 MIN. 0.80 1.20 2.10 0.9 1.4 2.9 1.07 2.61 0.20 0.25 0.45 Ta=25°C TYP. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 MAX. 0.20 0.45 0.90 0.1 0.1 0.1 0.31 0.31 0.50 0.50 0.65 ±0.1 1.0 Ta=-40 to 85°C MIN. 0.80 1.20 2.10 0.9 1.4 2.9 0.99 2.55 MAX. 0.20 0.45 0.90 0.1 0.1 0.1 0.37 0.33 ±1.0 10.0 µA µA V V V Unit
Seiko Instruments Inc.
55
MINI LOGIC SERIES SCHMITT INVERTER S-75L14ANC AC Characteristics
Rev.2.2_00
CL=15 pf, Input tr=tf=6 ns, VCC=3.3±0.3 V, Ta=25°C (unless otherwise specified) Parameter Symbol tTLH, tTHL tPLH, tPHL Measurement Conditions
MIN.
TYP. 4.0 4.0
MAX. 8.0 10.5
Unit
Output Rise/Fall Time Propagation Delay Time
ns
CL=25 pf, Input tr=tf=6 ns (unless otherwise specified) Parameter Symbol Measurement Conditions VCC(V) 1.0 1.5 3.0 1.0 1.5 3.0 Min. Ta=25°C Typ. 35 15 7 35 15 8 5 10 Max. 70 25 10 70 25 12 10 Ta=-40 to 85°C Min. Max. 90 30 14 90 30 15 10 Unit
Output Rise/Fall Time
tTLH, tTHL tPLH, tPHL
ns
Propagation Delay Time
Input Capacitance CIN pF *1 Equiv.Int. Capacitance CPD pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown
below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit
6 ns 6 ns VCC VIN 90% 10% tPHL 50 Ω CL VOUT 50% tPLH 50% VOL VOH 50% GND VIN VOUT
PG
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Input pin
56
Seiko Instruments Inc.
Rev.2.2_00
MINI LOGIC SERIES 2 INPUT OR GATE
S-75L32ANC
The S-75L32ANC is a single 2-intput OR gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The internal circuitry has buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications.
Features
• • • • • • • Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 1 V to 3.6 V 1.0 µA max. (at 3.6 V, 25°C) tPD =7 ns (at 3 V) VNIH=VNIL=28% VCC min. All pins SC-88A
Applications
• • • • Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
IN B IN A 1 2 3 4 OUT Y 1 (Top view) 5 VCC 5
Marking Specification
4 Product code
5L4
2 (Top view) 3
GND
Logic Diagram
True Values A L L H H B L H L H Y L H H H
IN B IN A
OUT Y
Seiko Instruments Inc.
57
MINI LOGIC SERIES 2 INPUT OR GATE S-75L32ANC Ordering
Delivery form: Model name: Taping only S-75L32ANC-5L4-TFG
Rev.2.2_00
Absolute Maximum Ratings
Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +5.0 -0.5 to +5.0 -0.5 to VCC+0.5 -20 ±20 ±12.5 ±25 200 (When not mounted on board) 350*1 -40 to +85 -65 to +150 260
Ta=25°C Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
58
Seiko Instruments Inc.
Rev.2.2_00 Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Input Rise and Fall Time Symbol VCC VIN VOUT dt/dv
MINI LOGIC SERIES 2 INPUT OR GATE S-75L32ANC
Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC=1.0 V) 0 to 500 (VCC=2.0 V) 0 to 400 (VCC=3.0 V)
Unit V V V ns
DC Characteristics
Parameter Symbol Conditions VCC 1.0 "H" level Input Voltage "L" level VIL VIH 1.5 3.0 1.0 1.5 3.0 1.0 VIN=VIH "H" level Output Voltage IOL=20 µA "L" level VOL VIN=VIL IOL=1 mA IOL=2.6 mA Input Current Current Consump. IIN ICC VIN=VCC or GND VIN=VCC or GND VOH or VIL IOH=-1 mA IOH=-2.6 mA IOH=-20 µA 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 3.6 3.6 MIN. 0.75 1.05 2.10 0.9 1.4 2.9 1.07 2.61 Ta=25°C TYP. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 MAX. 0.25 0.45 0.90 0.1 0.1 0.1 0.31 0.31 ±0.1 1.0 Ta=-40 to 85°C MIN. 0.75 1.05 2.10 0.9 1.4 2.9 0.99 2.55 MAX. 0.25 0.45 0.90 0.1 0.1 0.1 0.37 0.33 ±1.0 10.0 µA µA V V Unit
Seiko Instruments Inc.
59
MINI LOGIC SERIES 2 INPUT OR GATE S-75L32ANC AC Characteristics
Rev.2.2_00
CL=15 pf, Input tr=tf=6 ns, VCC=3.3±0.3 V, Ta=25°C (unless otherwise specified) Parameter Symbol tTLH, tTHL tPLH, tPHL Measurement Conditions
MIN.
TYP. 4.0 6.0
MAX. 8.0 9.0
Unit ns
Output Rise/Fall Time Propagation Delay Time
CL=25 pf, Input tr=tf=6 ns (unless otherwise specified) Parameter Symbol Measurement Conditions VCC(V) 1.0 1.5 3.0 1.0 1.5 3.0 Min. Ta=25°C Typ. 35 15 7 30 15 7 5 10 Max. 70 25 10 60 25 10 10 Ta=-40 to 85°C Min. Max. 90 30 14 75 30 14 10 Unit
Output Rise/Fall Time
tTLH, tTHL tPLH, tPHL
ns
Propagation Delay Time
Input Capacitance CIN pF *1 Equiv. Int. Capacitance CPD pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown
below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit 6 ns 90% VIN VOUT tPLH 50 Ω tPHL CL VOUT 50% 50% VOL
Remark No-load output during measurement of current consumption.
6 ns VCC
VIN
50% GND
PG
10%
VOH
Input Pin Equivalent Circuit
Input pin
60
Seiko Instruments Inc.
Rev.2.2_00
MINI LOGIC SERIES EXCLUSIVE OR GATE
S-75L86ANC
The S-75L86ANC is an EXCLUSIVE OR GATE fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The internal circuitry has buffered outputs to ensure high noise immunity and output stability. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications.
Features
• • • • • • • Wide power supply range: Low current consumption: Typical propagation delay: High noise immunity: Power down protection: Very small plastic package: Lead-free products 1 V to 3.6 V 1.0 µA max. (at 3.6 V, 25°C) tPD = 7 ns (at 3 V) VNIH=VNIL=28% VCC min. All pins SC-88A
Applications
• • • • Personal computers, peripherals Cellular phones Cameras Games
Pin Assignment
IN B IN A GND
Marking Specification
5 4 Product code
1 2 3
5
VCC
5L8
4 OUT Y 1 2 (Top view) 3
(Top view)
Logic Diagram
True Values A L L H H B L H L H Y L H H L
IN B IN A
OUT Y
Seiko Instruments Inc.
61
MINI LOGIC SERIES EXCLUSIVE OR GATE S-75L86ANC Ordering
Delivery form: Model name: Taping only S-75L86ANC-5L8-TFG
Rev.2.2_00
Absolute Maximum Ratings
Item Power Supply Voltage Input Voltage Output Voltage Input Parasitic Diode Current Output Parasitic Diode Current Output Current VCC/GND Current Power Dissipation Operating Ambient Temperature Storage Temp. Range Lead Temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Topr Tstg TL Ratings -0.5 to +5.0 -0.5 to +5.0 -0.5 to VCC+0.5 -20 ±20 ±12.5 ±25 200 (When not mounted on board) 350*1 -40 to +85 -65 to +150 260
Ta=25°C Unit V V V mA mA mA mA mW mW °C °C °C
*1. When mounted on board [Mounted board] (1) Board size : 114.3 mm × 76.2 mm × t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
400 Power Dissipation (PD) [mW] 350 300 250 200 150 100 50 0 0 150 100 50 Ambient Temperature (Ta) [°C]
Power Dissipation of Package (When Mounted on Board)
62
Seiko Instruments Inc.
Rev.2.2_00 Recommended Operating Conditions
Parameter Power Voltage Input Voltage Output Voltage Input Rise and Fall Time Symbol VCC VIN VOUT dt/dv
MINI LOGIC SERIES EXCLUSIVE OR GATE S-75L86ANC
Standard 1 to 3.6 0 to 3.6 0 to VCC 0 to 1000 (VCC=1.0 V) 0 to 500 (VCC=2.0 V) 0 to 400 (VCC=3.0 V)
Unit V V V ns
DC Characteristics
Parameter Symbol Conditions VCC 1.0 "H" level Input Voltage "L" level VIL VIH 1.5 3.0 1.0 1.5 3.0 1.0 VIN=VIH "H" level Output Voltage VIN=VIH "L" level VOL or VIL IOL=1 mA IOL=2.6 mA Input Current Current Consump. IIN ICC VIN=VCC or GND VIN=VCC or GND IOL=20 µA VOH or VIL IOH=-1 mA IOH=-2.6 mA IOH=-20 µA 1.5 3.0 1.5 3.0 1.0 1.5 3.0 1.5 3.0 3.6 3.6 MIN. 0.75 1.05 2.10 0.9 1.4 2.9 1.07 2.61 Ta=25°C TYP. 1.0 1.5 3.0 1.23 2.68 0 0 0 0.23 0.23 MAX. 0.25 0.45 0.90 0.1 0.1 0.1 0.31 0.31 ±0.1 1.0 Ta=-40 to 85°C MIN. 0.75 1.05 2.10 0.9 1.4 2.9 0.99 2.55 MAX. 0.25 0.45 0.90 0.1 0.1 0.1 0.37 0.33 ±1.0 10.0 µA µA V V Unit
Seiko Instruments Inc.
63
MINI LOGIC SERIES EXCLUSIVE OR GATE S-75L86ANC AC Characteristics
Rev.2.2_00
CL=15 pf, Input tr=tf=6 ns, VCC=3.3±0.3 V, Ta=25°C (unless otherwise specified) Parameter Symbol tTLH, tTHL tPLH, tPHL Measurement Conditions
MIN.
TYP. 4.0 6.0
MAX. 8.0 9.0
Unit ns
Output Rise/Fall Time Propagation Delay Time
CL=25 pf, Input tr=tf=6 ns (unless otherwise specified) Parameter Symbol Measurement Conditions VCC(V) 1.0 1.5 3.0 1.0 1.5 3.0 Min. Ta=25°C Typ. 35 15 7 30 15 7 5 10 Max. 70 25 10 60 25 10 10 Ta=-40 to 85°C Min. Max. 90 30 14 75 30 14 10 Unit
Output Rise/Fall Time
tTLH, tTHL tPLH, tPHL
ns
Propagation Delay Time
Input Capacitance CIN pF *1 Equiv. Int. Capacitance CPD pF *1. CPD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown
below. Current consumption is averaged by the following equation. ICC(opr)=CPD VCC fin+ICC Measurement Circuit
6 ns 90% 10% tPLH tPHL 50 Ω CL VOUT 50% 50% VOL VOH 6 ns VCC VIN VIN VOUT 50% GND
PG
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Input pin
64
Seiko Instruments Inc.
2.0±0.2 1.3±0.1
5
4
1
2 0.65
3 0.65
0.15 -0.05
+0.1
0.2 +0.1 -0.05
No. NP005-B-P-SD-1.1
TITLE No. SCALE UNIT
SC88A-B-PKG Dimensions NP005-B-P-SD-1.1
mm
Seiko Instruments Inc.
4.0±0.1
2.0±0.1
1.1±0.1 ø1.55±0.05 0.2±0.05
0.3 4.0±0.1 (2.25) ø1.05±0.1
2.05±0.1
321
4
5
Feed direction
No. NP005-B-C-SD-2.0
TITLE No. SCALE UNIT
SC88A-B-Carrier Tape NP005-B-C-SD-2.0
mm
Seiko Instruments Inc.
12.5max.
Enlarged drawing in the central part ø13±0.2
9.0±0.3
(60°)
(60°)
No. NP005-B-R-SD-2.1
TITLE No. SCALE UNIT mm
SC88A-B-Reel NP005-B-R-SD-2.1
QTY. 3000
Seiko Instruments Inc.
• • • • • •
The information described herein is subject to change without notice. Seiko Instruments Inc. is not responsible for any problems caused by circuits or diagrams described herein whose related industrial properties, patents, or other rights belong to third parties. The application circuit examples explain typical applications of the products, and do not guarantee the success of any specific mass-production design. When the products described herein are regulated products subject to the Wassenaar Arrangement or other agreements, they may not be exported without authorization from the appropriate governmental authority. Use of the information described herein for other purposes and/or reproduction or copying without the express permission of Seiko Instruments Inc. is strictly prohibited. The products described herein cannot be used as part of any device or equipment affecting the human body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of Seiko Instruments Inc. Although Seiko Instruments Inc. exerts the greatest possible effort to ensure high quality and reliability, the failure or malfunction of semiconductor products may occur. The user of these products should therefore give thorough consideration to safety design, including redundancy, fire-prevention measures, and malfunction prevention, to prevent any accidents, fires, or community damage that may ensue.
工商网监
湘ICP备2023018690号
