S-8750B0CUP-ACGT2G

S-87x Series www.sii-ic.com HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 © Seiko Instruments Inc., 1997-2010 The S-87x Series is a low-power high withstand-voltage regulators with a reset function, which integrates highprecision voltage detection and voltage regulation circuits on a single chip. The S-87x Series has lineups for lithium-ion battery packs. „ Features • Accuracy of output voltage: • • • • • • • • ±2.4 % 2.5 V to 5.8 V (0.1 V step) Accuracy of detection voltage: ±2.4 % (For the F type, the release voltage is ±1.1 %) 2.1 V to 11.3 V (0.1 V step) Low I/O voltage difference: 0.15 V typ. (at IOUT=30 mA, VOUT=5.0 V) 0.45 V typ. (at IOUT=30 mA, VOUT=3.0 V) Low current consumption: At Operation mode: 8 μA max. At Shutdown mode: 3.5 μA max. (Available for the C/E/G type) Wide operating voltage range: 24 V max. Wide operating temperature range: −40°C to +85°C Built-in delay circuit or shutdown circuit Built-in short-circuit protection circuit Lead-free, Sn 100%, halogen-free*1 *1. Refer to “„ Product Name Structure” for details. „ Applications • Constant voltage power supply or reset circuit of battery-powered equipment, VTR, camera, communications equipment and others. • Lithium-ion secondary battery pack „ Package • SOT-89-5 Seiko Instruments Inc. 1 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series „ Block Diagrams 1. A/F type Short-circuit protection circuit VIN Voltage regulator VOUT Voltage detection circuit VOR Delay circuit VSS CD Figure 1 2. B type Short-circuit protection circuit VIN Voltage regulator Voltage detection circuit VSS Delay circuit CD Figure 2 2 Seiko Instruments Inc. VOUT VOR HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 3. C type Short-circuit protection circuit VIN Voltage regulator VOUT VOR Voltage detection circuit VSS Shutdown circuit VPF Figure 3 4. E type Short-circuit protection circuit VIN Voltage regulator VOUT Power on/off SENSE VOR Voltage detection circuit VSS Figure 4 Seiko Instruments Inc. 3 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 5. G type Short-circuit protection circuit VIN Voltage regulator VOUT Voltage detection circuit VSS VOR Shutdown circuit VPF Figure 5 4 Seiko Instruments Inc. HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series „ Product Name Structure 1. Function list Table 1 Type name Voltage detector (VD) A type B type C type E type F type G type Detects VIN Detects VOUT Detects VIN Detects VSENSE Detects VIN Detects VOUT Detection voltage (−VDET) accuracy [%] ±2.4 ±2.4 ±2.4 ±2.4 ⎯ ±2.4 Release voltage (+VDET) accuracy [%] ⎯ ⎯ ⎯ ⎯ ±1.1 ⎯ Built-in delay circuit Yes Yes No No Yes No Shutdown function VD VR No No No No Yes No Yes No No No Yes No 2. Product name selection guide S-87 xx xx x UP - xxx T2 x Environmental code U: Lead-free (Sn 100%), halogen-free G: Lead-free (for details, please contact our sales office) IC direction in the tape sepecifications*1 Product name (Abbreviation)*2 Package name (Abbreviation) UP: SOT-89-5 Product type A: Built-in delay circuit, VIN detection (−VDET detection) B: Built-in delay circuit, VOUT detection C: Built-in shudown circuit for regulator, VIN detection E: Built-in shudown circuit for regulator, VSENSE detection F: Built-in delay circuit, VIN detection (+VDET detection) G: Built-in shudown circuit for regulator, VOUT detection Detection voltage of voltage detector 21 to 94, A0, B0, B3 (Ex. When the detection voltage of voltage detector is 2.1 V, it is expressed as 21.*3) Output voltage of voltage regulator 25 to 56 (Ex. When the output voltage of voltage regulator is *1. Refer to the tape specifications at the end of this document. *2. Refer to the Table 2 to Table 3 in the “4. Product name list”. *3. A0 for 10.0 V, B0 for 11.0 V, B3 for 11.3 V. 3. Package Package Name SOT-89-5 Package UP005-A-P-SD Drawing Code Tape UP005-A-C-SD Seiko Instruments Inc. Reel UP005-A-R-SD 5 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 4. Product name list Table 2 (1/2) VR output voltage [V] 5.6 5.2 5.0 3.3 3.0 2.6 6 VD detection voltage [V] 3.5 9.4 7.1 5.5 11.0 7.7 6.1 4.5 4.3 4.1 3.9 3.7 3.4 2.9 2.1 7.7 6.1 4.1 2.8 2.5 6.9 5.9 2.5 2.4 2.3 2.2 2.1 2.2 S-87xxxxA Series S-87xxxxB Series ⎯ ⎯ ⎯ ⎯ ⎯ S-875077AUP-AAFT2x ⎯ S-875045AUP-AAAT2x S-875043AUP-AABT2x S-875041AUP-AACT2x S-875039AUP-AADT2x S-875037AUP-AAET2x ⎯ ⎯ ⎯ S-873377AUP-0AAT2x ⎯ ⎯ S-873328AUP-0ABT2x ⎯ ⎯ ⎯ S-873025AUP-ADAT2x S-873024AUP-ADBT2x S-873023AUP-ADCT2x S-873022AUP-ADDT2x S-873021AUP-ADET2x ⎯ S-875635BUP-AGAT2x ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ S-875045BUP-ABAT2x S-875043BUP-ABBT2x S-875041BUP-ABCT2x S-875039BUP-ABDT2x S-875037BUP-ABET2x S-875034BUP-ABFT2x S-875029BUP-ABHT2x S-875021BUP-ABGT2x ⎯ ⎯ ⎯ ⎯ S-873325BUP-ALAT2x ⎯ ⎯ S-873025BUP-AEAT2x S-873024BUP-AEBT2x S-873023BUP-AECT2x S-873022BUP-AEDT2x S-873021BUP-AEET2x S-872622BUP-OLAT2x Seiko Instruments Inc. S-87xxxxC Series ⎯ S-875294CUP-AHCT2x S-875271CUP-AHAT2x S-875255CUP-AHBT2x S-8750B0CUP-ACGT2x S-875077CUP-ACFT2x S-875061CUP-ACHT2x S-875045CUP-ACAT2x S-875043CUP-ACBT2x S-875041CUP-ACCT2x S-875039CUP-ACDT2x S-875037CUP-ACET2x ⎯ ⎯ ⎯ ⎯ S-873361CUP-AOHT2x S-873341CUP-AOCT2x ⎯ ⎯ S-873069CUP-AFFT2x S-873059CUP-AFGT2x S-873025CUP-AFAT2x S-873024CUP-AFBT2x S-873023CUP-AFCT2x S-873022CUP-AFDT2x S-873021CUP-AFET2x ⎯ HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series Table 2 (2/2) VR output voltage [V] 5.0 VD detection S-87xxxxE Series S-87xxxxG Series voltage [V] S-8750B0EUP-AJIT2x 11.0 ⎯ S-875087EUP-AJGT2x 8.7 ⎯ 7.7 S-875077EUP-AJFT2x ⎯ 6.1 S-875061EUP-AJHT2x ⎯ S-875042GUP-ANCT2x 4.2 ⎯ S-875037GUP-ANET2x 3.7 ⎯ S-875033EUP-AJAT2x 3.3 ⎯ S-875030EUP-AJBT2x 3.0 ⎯ S-8733B0EUP-APCT2x 3.3 11.0 ⎯ S-8733A0EUP-APFT2x 10.0 ⎯ S-873382EUP-APHT2x 8.2 ⎯ S-873372EUP-APET2x 7.2 ⎯ S-873364EUP-APGT2x 6.4 ⎯ S-873348EUP-APDT2x 4.8 ⎯ 3.0 S-873330EUP-APBT2x ⎯ 3.0 11.3 S-8730B3EUP-AMFT2x ⎯ 8.2 S-873082EUP-AMCT2x ⎯ 6.2 S-873062EUP-AMBT2x ⎯ S-873050EUP-AMET2x 5.0 ⎯ S-873042EUP-AMDT2x 4.2 ⎯ S-872548EUP-AZBT2x 2.5 4.8 ⎯ S-872530EUP-AZCT2x 3.0 ⎯ S-872526EUP-AZAT2x 2.6 ⎯ Caution In the S-87xxxxB/S-87xxxxG Series, when the output voltage of the voltage regulator is close to the detection voltage of the voltage detector, the transient response of the voltage regulator may cause false detection. Please take transient response into account when deciding voltages. Remark 1. 2. x: G or U Please select products of environmental code = U for Sn 100%, halogen-free products. Table 3 VR output VD release S-87xxxxF Series voltage [V] voltage [V] S-875087FUP-AKAT2x 5.0 8.7 Remark 1. x: G or U 2. Please select products of environmental code = U for Sn 100%, halogen-free products. Seiko Instruments Inc. 7 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series „ Pin Configuration SOT-89-5 Top view 5 4 Table 4 Pin No. 1 2 3 1 2 3 Symbol VOUT VSS CD (A/B/F type) VPF (C/G type) SENSE (E type) 4 VOR 5 VIN Figure 6 8 Seiko Instruments Inc. Description Voltage output pin of voltage regulator Ground pin Connection pin of external capacitor for delay of voltage detector Input pin of shutdown circuit Voltage monitoring pin of voltage detector Output pin of voltage detector, Nch opendrain output Positive power-supply HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series „ Absolute Maximum Ratings Table 5 Input voltage*1 Item (Unless otherwise specified: Ta=25°C) Absolute maximum rating Unit V VSS−0.3 to VSS+26 VSS−0.3 to VIN+0.3 Symbol VIN VCD (A/B/F type) VSS−0.3 to VSS+26 VPF (C/G type) VSENSE (E type) VOUT VOR PD VSS−0.3 to VIN+0.3 VSS−0.3 to VSS+26 500 (When not mounted on board) mW 1000*2 °C Operating ambient temperature Topr −40 to +85 Storage temperature Tstg −40 to +125 *1. Even pulse (μs) noise exceeding the above input voltage (VSS+26 V) may damage the IC. Observe the rated input voltage (VSS+26 V). *2. When mounted on board [Mounted board] (1) Board size: 114.3 mm × 76.2 mm × t1.6 mm (2) Board name: JEDEC STANDARD51-7 Output voltage Output voltage of voltage detector Power dissipation Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. (2) When not mounted on board 600 Power Dissipation PD (mW) Power Dissipation PD (mW) (1) When mounted on board 1200 1000 800 600 400 200 0 0 50 100 150 500 400 300 200 100 0 0 Ambient Temperature Ta (°C) 50 100 150 Ambient Temperature Ta (°C) Figure 7 Power dissipation of package Seiko Instruments Inc. 9 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series „ Electrical Characteristics 1. S-8750xxA Series/S-8750xxB Series Table 6 Item Voltage Regulator Output voltage I/O voltage difference Symbol VOUT Vdif Line regulation ΔVOUT1 Load regulation ΔVOUT2 Input voltage VIN ΔVOUT ΔTa Temperature coefficient of VOUT Voltage Detector Operating voltage Delay time*1 Tempertue characteristic of −VDET Detection voltage Vopr tpd Δ − VDET ΔTa −VDET Sink current IDOUT Leakage current ILEAK Hysteresis width VHYS Condition VIN=7 V, IOUT=30 mA IOUT=30 mA VIN=6 to 24 V, IOUT=30 mA VIN=7 V, IOUT=50 μA to 40 mA ⎯ VIN=7 V, IOUT=30 mA, Ta=−40°C to +85°C CD=4.7 nF ⎯ Ta=−40°C to +85°C S-875045A/B S-875043A/B S-875041A/B S-875039A/B S-875037A/B S-875021B Nch, VIN=1.3 V VDS=0.5 V VIN=2.4 V VIN=3.6 V Nch, VDS=24 V, VIN=10 V S-875045A/B S-875043A/B to S-875021A/B Total Current consumption*2 ISS VIN=7 V, Unloaded *1. tpd (ms)=(3.18 min., 5.74 typ., 8.73 max.)×CD (nF) *2. Excluding the charging current of CD 10 Seiko Instruments Inc. (Unless otherwise specified: Ta=25°C) Test Min. Typ. Max. Unit circuit 4.88 ⎯ 5.00 0.15 5.12 0.40 V ⎯ 15 50 mV ⎯ 15 50 ⎯ ⎯ 24 V ⎯ ±0.38 ±1.52 mV /°C 1.3 15 ⎯ 27 24 41 2 3 ⎯ ±0.5 ±2.0 4.392 4.196 4.001 3.806 3.611 2.049 0.25 1.50 3.00 4.50 4.30 4.10 3.90 3.70 2.10 0.60 2.60 4.50 4.608 4.404 4.199 3.994 3.789 2.151 ⎯ ⎯ ⎯ V ms mV /°C V mA 4 ⎯ ⎯ 0.1 −VDET ×0.01 −VDET ×0.03 ⎯ ⎯ ⎯ 3 −VDET ×0.025 −VDET ×0.08 8 1 2 μA V 2 μA 5 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 2. S-8730xxA Series/S-8730xxB Series Table 7 Item Voltage Regulator Output voltage I/O voltage difference Symbol VOUT Vdif Line regulation ΔVOUT1 Load regulation ΔVOUT2 Input voltage VIN ΔVOUT ΔTa Temperature coefficient of VOUT Voltage Detector Operating voltage Delay time*1 Temperature characteristic of −VDET Detection voltage Sink current Vopr tpd Δ − VDET ΔTa −VDET IDOUT Leakage current ILEAK Hysteresis width VHYS Total Current consumption*2 ISS Condition VIN=5 V, IOUT=30 mA IOUT=30 mA VIN=4 to 24 V, IOUT=30 mA VIN=5 V, IOUT=50 μA to 40 mA ⎯ VIN=5 V, IOUT=30 mA, Ta=−40°C to +85°C CD=4.7 nF ⎯ Ta=−40°C to +85°C S-873025A/B S-873024A/B S-873023A/B S-873022A/B S-873021A/B Nch, VIN=1.3 V VDS=0.5 V Other than below VIN=2.4 V S-873025A/B Nch, VDS=24 V, VIN=10 V ⎯ VIN=5 V, Unloaded (Unless otherwise specified: Ta=25°C) Test Min. Typ. Max. Unit circuit 2.928 ⎯ 3.000 0.45 3.072 0.70 V 1 ⎯ 15 50 mV ⎯ 15 50 ⎯ ⎯ 24 V ⎯ ±0.23 ±0.92 mV /°C 1.3 15 ⎯ 27 24 41 2 3 ⎯ ±0.3 ±1.2 2.440 2.342 2.244 2.147 2.049 2.500 2.400 2.300 2.200 2.100 2.560 2.458 2.356 2.253 2.151 V ms mV /°C V 0.25 0.60 ⎯ mA 4 1.50 2.60 ⎯ ⎯ ⎯ 0.1 μA −VDET ×0.03 ⎯ −VDET ×0.08 V 2 ⎯ 3 8 μA 5 2 *1. tpd (ms)=(3.18 min., 5.74 typ., 8.73 max.)×CD (nF) *2. Excluding the charging current of CD Seiko Instruments Inc. 11 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 3. S-875635B Table 8 Item Voltage Regulator Output voltage I/O voltage difference Symbol Condition VOUT Vdif VIN=7.6 V, IOUT=30 mA IOUT=30 mA VIN=6.6 to 24 V, IOUT=30 mA VIN=7.6 V, IOUT=50 μA to 40 mA ⎯ Line regulation ΔVOUT1 Load regulation ΔVOUT2 Input voltage VIN ΔVOUT ΔTa Temperature coefficient of VOUT Voltage Detector Operating voltage Delay time*1 Temperature characteristic of −VDET Detection voltage Sink current Vopr tpd Δ − VDET ΔTa −VDET IDOUT Leakage current ILEAK Hysteresis width VHYS Total Current consumption*2 ISS VIN=7.6 V, IOUT=30 mA, Ta=−40°C to +85°C CD=4.7 nF ⎯ Ta=−40°C to +85°C ⎯ Nch, VIN=1.3 V VDS=0.5 V VIN=2.4 V Nch, VDS=24 V, VIN=10 V ⎯ VIN=7.6 V, Unloaded *1. tpd (ms)=(3.18 min., 5.74 typ., 8.73 max.)×CD (nF) *2. Excluding the charging current of CD 12 Seiko Instruments Inc. (Unless otherwise specified: Ta=25°C) Test Min. Typ. Max. Unit circuit 5.465 ⎯ 5.60 0.15 5.735 0.40 V ⎯ 15 50 mV ⎯ 15 50 ⎯ ⎯ 24 V ⎯ ±0.43 ±1.72 mV /°C 1.3 15 ⎯ 27 24 41 ⎯ ±0.3 ±1.2 3.416 0.25 1.50 3.50 0.60 2.60 3.584 ⎯ ⎯ V ms mV /°C V mA ⎯ ⎯ 0.1 μA −VDET ×0.03 ⎯ −VDET ×0.08 V 2 ⎯ 4 8 μA 5 1 2 3 2 4 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 4. S-873325B Table 9 Item Voltage Regulator Output voltage I/O voltage difference Symbol Condition VOUT Vdif VIN=5.3 V, IOUT=30 mA IOUT=30 mA VIN=4.3 to 24 V, IOUT=30 mA VIN=5.3 V, IOUT=50 μA to 40 mA ⎯ Line regulation ΔVOUT1 Load regulation ΔVOUT2 Input voltage VIN ΔVOUT ΔTa Temperature coefficient of VOUT Voltage Detector Operating voltage Delay time*1 Temperature characteristic of −VDET Detection voltage Vopr tpd Δ − VDET ΔTa −VDET Sink current IDOUT Leakage current ILEAK Hysteresis width VHYS Total Current consumption*2 ISS (Unless otherwise specified: Ta=25°C) Test Min. Typ. Max. Unit circuit 3.220 ⎯ 3.300 0.45 3.380 0.70 V ⎯ 15 50 mV ⎯ 15 50 ⎯ ⎯ 24 V ⎯ ±0.25 ±1.00 mV /°C 1.3 15 ⎯ 27 24 41 2 3 Ta=−40°C to +85°C ⎯ ±0.2 ±0.8 ⎯ Nch, VDS=0.5 V, VIN=1.3 V Nch, VDS=24 V, VIN=10 V 2.440 2.500 2.560 V ms mV /°C V 0.25 0.60 ⎯ mA 4 ⎯ ⎯ 0.1 μA −VDET ×0.03 ⎯ −VDET ×0.08 V 2 ⎯ 4 8 μA 5 VIN=5.3 V, IOUT=30 mA, Ta=−40°C to +85°C CD=4.7 nF ⎯ ⎯ VIN=5.3 V, Unloaded 1 2 *1. tpd (ms)=(3.18 min., 5.74 typ., 8.73 max.)×CD (nF) *2. Excluding the charging current of CD Seiko Instruments Inc. 13 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 5. S-8750xxC Series/S-875037G Table 10 (1/2) Item Voltage Regulator Output voltage I/O voltage difference Symbol VOUT Vdif Line regulation ΔVOUT1 Load regulation ΔVOUT2 Input voltage VIN ΔVOUT ΔTa Temperature coefficient of VOUT Shutdown output voltage Voltage Detector Operating voltage Temperature characteristic of −VDET VOUT/OFF Vopr Δ − VDET ΔTa Detection voltage −VDET Sink current IDOUT Leakage current ILEAK Hysteresis width VHYS 14 (Unless otherwise specified: Ta=25°C) Test Min. Typ. Max. Unit circuit Condition VIN=7 V, IOUT=30 mA IOUT=30 mA VIN=6 to 24 V, IOUT=30 mA VIN=7 V, IOUT=50 μA to 40 mA ⎯ 4.88 ⎯ 5.00 0.15 5.12 0.40 V ⎯ 15 50 mV ⎯ 15 50 ⎯ ⎯ 24 V VIN=7 V, IOUT=30 mA, Ta=−40°C to +85°C ⎯ ±0.38 ±1.52 mV /°C VIN=7 V, VPF =”L”, RL=1 MΩ ⎯ ⎯ 0.1 V 6 ⎯ Ta=−40°C S-8750B0C to +85°C S-875077C S-875061C to S-875037C, S-875037G S-8750B0C S-875077C S-875061C S-875045C S-875043C S-875041C S-875039C S-875037C/S-875037G Nch, VIN=1.3 V VDS=0.5 V VIN=2.4 V VIN=3.6 V VIN=10 V Nch, S-875077C to VDS=24 V S-875037C, S-875037G VIN=15 V S-8750B0C 1.3 ⎯ 24 2 ⎯ ±0.8 ±3.2 V mV /°C ⎯ ±0.6 ±2.4 ⎯ ±0.5 ±2.0 10.736 7.515 5.953 4.392 4.196 4.001 3.806 3.611 0.25 1.50 3.00 11.00 7.70 6.10 4.50 4.30 4.10 3.90 3.70 0.60 2.60 4.50 11.264 7.885 6.247 4.608 4.404 4.199 3.994 3.789 ⎯ ⎯ ⎯ ⎯ ⎯ 0.1 μA S-875045C −VDET ×0.01 ⎯ −VDET ×0.025 V S-8750B0C to S-875061C, S-875043C to S-875037C, S-875037G −VDET ×0.03 ⎯ −VDET ×0.08 Seiko Instruments Inc. 1 2 V mA 4 2 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series Table 10 (2/2) Item Symbol Condition (Unless otherwise specified: Ta=25°C) Test Min. Typ. Max. Unit circuit Total Current consumption Shutdown input voltage ISS VIN=7 V, Unloaded S-8750B0C to S-875061C S-875045C to S-875037C, S-875037G ⎯ 4 8 ⎯ 3 8 lof VPF =”L”, Shutdown, VIN=7 V ⎯ 1.5 3.5 VIL VPF =”L”, Shutdown, VIN=7 V ⎯ ⎯ 0.4 VIH VPF =”H”, Power on, VIN=7 V 2.0 ⎯ ⎯ Seiko Instruments Inc. μA 5 V 6 15 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 6. S-8730xxC Series Table 11 Item Voltage Regulator Output voltage I/O voltage difference Symbol VOUT Vdif Line regulation ΔVOUT1 Load regulation ΔVOUT2 Input voltage VIN ΔVOUT ΔTa Temperature coefficient of VOUT Shutdown output voltage Voltage Detector Operating voltage Temperature characteristic of −VDET VOUTOFF Condition VIN=5 V, IOUT=30 mA IOUT=30 mA VIN=4 to 24 V, IOUT=30 mA VIN=5 V, IOUT=50 μA to 40 mA ⎯ VIN=5 V, IOUT=30 mA, Ta=−40°C to +85°C VIN=5V, VPF =”L”, RL=1 MΩ Vopr Δ − VDET ΔTa Detection voltage −VDET Sink current IDOUT Ta=−40°C to +85°C ⎯ S-873069C S-873025C to S-873021C Leakage current ILEAK S-873069C S-873025C S-873024C S-873023C S-873022C S-873021C Nch, VIN=1.3 V VDS=0.5 V Other than below VIN=2.4 V S-873069C, S-873025C VIN=3.6 V S-873069C Nch, VDS=24 V, VIN=10 V Hysteresis width VHYS ⎯ Total Current consumption Shutdown input voltage 16 (Unless otherwise specified: Ta=25°C) Test Min. Typ. Max. Unit circuit 2.928 ⎯ 3.000 0.45 3.072 0.70 V ⎯ 15 50 mV ⎯ 15 50 ⎯ ⎯ 24 V ⎯ ±0.23 ±0.92 mV /°C ⎯ ⎯ 0.1 V 6 1.3 ⎯ ⎯ ±0.5 24 ±2.0 V 2 ⎯ ±0.3 ±1.2 6.734 2.440 2.342 2.244 2.147 2.049 6.900 2.500 2.400 2.300 2.200 2.100 7.066 2.560 2.458 2.356 2.253 2.151 V 0.25 0.60 ⎯ mA 1.50 2.60 ⎯ 3.00 4.50 ⎯ ⎯ −VDET ×0.03 ⎯ 0.1 −VDET ×0.08 μA V 2 3 1.5 8 3.5 μA 5 V 6 ⎯ ISS lof VIN=5 V, Unloaded VPF =”L”, Shutdown, VIN=5 V ⎯ ⎯ VIL VPF =”L”, Shutdown, VIN=5 V ⎯ ⎯ 0.4 VIH VPF =”H”, Power on, VIN=5 V 2.0 ⎯ ⎯ Seiko Instruments Inc. 1 mV /°C 4 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 7. S-875271C, S-875255C Table 12 Item Voltage Regulator Output voltage I/O voltage difference Symbol VOUT Vdif Line regulation ΔVOUT1 Load regulation ΔVOUT2 Input voltage VIN ΔVOUT ΔTa Temperature coefficient of VOUT Shutdown output voltage Voltage Detector Operating voltage Temperature characteristic of −VDET VOUTOFF Vopr Δ − VDET ΔTa Detection voltage −VDET Sink current IDOUT Leakage current ILEAK Hysteresis width VHYS Total Current consumption Shutdown input voltage Condition VIN=7.2 V, IOUT=30 mA IOUT=30 mA VIN=6.2 to 24 V, IOUT=30 mA VIN=7.2 V, IOUT=50 μA to 40 mA ⎯ VIN=7.2 V, IOUT=30 mA, Ta=−40°C to +85°C VIN=7.2V, VPF =”L”, RL=1 MΩ ⎯ Ta=−40°C S-875271C to +85°C S-875255C S-875271C S-875255C Nch, VIN=1.3V VDS=0.5 V VIN=2.4V VIN=3.6V Nch, VDS=24 V, VIN=10 V ⎯ (Unless otherwise specified: Ta=25°C) Test Min. Typ. Max. Unit circuit 5.075 ⎯ 5.20 0.15 5.325 0.40 V ⎯ 15 50 mV ⎯ 15 50 ⎯ ⎯ 24 V ⎯ ±0.40 ±1.60 mV /°C ⎯ ⎯ 0.1 V 6 1.3 ⎯ ⎯ 6.929 5.368 0.25 1.50 3.00 ⎯ −VDET ×0.03 ⎯ ±0.5 ±0.4 7.10 5.50 0.60 2.60 4.50 ⎯ 24 ±2.0 ±1.6 7.271 5.632 ⎯ ⎯ ⎯ 0.1 −VDET ×0.08 V mV /°C V 2 mA 4 V 2 μA 5 V 6 ⎯ ISS VIN=7.2 V, Unloaded ⎯ 4 8 lof VPF =”L”, Shutdown, VIN=7.2 V ⎯ 1.5 3.5 VIL VPF =”L”, Shutdown, VIN=7.2 V ⎯ ⎯ 0.4 VIH VPF =”H”, Power on, VIN=7.2 V 2.0 ⎯ ⎯ Seiko Instruments Inc. 1 μA 17 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 8. S-875294C Table 13 Item Voltage Regulator Output voltage I/O voltage difference Symbol VOUT Vdif Line regulation ΔVOUT1 Load regulation ΔVOUT2 Input voltage VIN ΔVOUT ΔTa Temperature coefficient of VOUT Shutdown output voltage Voltage Detector Operating voltage Temperature characteristic of −VDET VOUTOFF Vopr Δ − VDET ΔTa Detection voltage −VDET Sink current IDOUT Leakage current ILEAK Hysteresis width VHYS Total Current consumption Shutdown input voltage 18 Condition VIN=14.4 V, IOUT=30 mA IOUT=30 mA VIN=6.2 to 24 V, IOUT=30 mA VIN=14.4 V, IOUT=50 μA to 40 mA ⎯ VIN=14.4 V, IOUT=30 mA, Ta=−40°C to +85°C VIN=14.4 V, VPF =”L”, RL=1 MΩ ⎯ Ta=−40°C to +85°C ⎯ VIN=1.3 V VIN=2.4 V VIN=3.6 V Nch, VDS=24 V, VIN=10 V Nch, VDS=0.5 V ⎯ (Unless otherwise specified: Ta=25°C) Test Min. Typ. Max. Unit circuit 5.075 ⎯ 5.20 0.15 5.325 0.40 V ⎯ 15 50 mV ⎯ 15 50 ⎯ ⎯ 24 V ⎯ ±0.40 ±1.60 mV /°C ⎯ ⎯ 0.1 V 6 1.3 ⎯ 24 2 ⎯ ±0.7 ±2.8 V mV /°C 9.174 9.40 9.626 V 0.25 1.50 3.00 ⎯ −VDET ×0.03 0.60 2.60 4.50 ⎯ ⎯ ⎯ ⎯ 0.1 −VDET ×0.08 mA V 2 μA 5 V 6 ⎯ ISS VIN=14.4 V, Unloaded ⎯ 4 9 lof VPF =”L”, Shutdown,, VIN=14.4 V ⎯ 2.1 4.7 VIL VPF =”L”, Shutdown, VIN=14.4 V ⎯ ⎯ 0.4 VIH VPF =”H”, Power on, VIN=14.4 V 2.6 ⎯ ⎯ Seiko Instruments Inc. 1 4 μA HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 9. S-873361C Table 14 Item Voltage Regulator Output voltage I/O voltage difference Symbol VOUT Vdif Line regulation ΔVOUT1 Load regulation ΔVOUT2 Input voltage VIN ΔVOUT ΔTa Temperature coefficient of VOUT Shutdown output voltage Voltage Detector Operating voltage Temperature characteristic of −VDET VOUTOFF Vopr Δ − VDET ΔTa Detection voltage −VDET Sink current IDOUT Leakage current ILEAK Hysteresis width VHYS Total Current consumption Shutdown input voltage Condition VIN=5.3 V, IOUT=30 mA IOUT=30 mA VIN=4.3 to 24 V, IOUT=30 mA VIN=5.3 V, IOUT=50 μA to 40 mA ⎯ (Unless otherwise specified: Ta=25°C) Test Min. Typ. Max. Unit circuit 3.220 ⎯ 3.300 0.45 3.380 0.70 V ⎯ 15 50 mV ⎯ 15 50 ⎯ ⎯ 24 V VIN=5.3 V, IOUT=30 mA, Ta=−40°C to +85°C ⎯ ±0.25 ±1.00 mV /°C VIN=5.3 V, VPF =”L”, RL=1 MΩ ⎯ ⎯ 0.1 V 6 1.3 ⎯ 24 2 ⎯ ±0.5 ±2.0 V mV /°C 5.953 6.100 6.247 V 0.25 1.50 3.00 ⎯ −VDET ×0.03 0.60 2.60 4.50 ⎯ ⎯ ⎯ ⎯ 0.1 −VDET ×0.08 mA V 2 μA 5 V 6 ⎯ Ta=−40°C to +85°C ⎯ VIN=1.3 V VIN=2.4 V VIN=3.6 V Nch, VDS=24 V, VIN=10 V Nch, VDS=0.5 V ⎯ ⎯ ISS VIN=5.3 V, Unloaded ⎯ 4 8 lof VPF =”L”, Shutdown, VIN=5.3 V ⎯ 1.5 3.5 VIL VPF =”L”, Shutdown, VIN=5.3 V ⎯ ⎯ 0.4 VIH VPF =”H”, Power on, VIN=5.3 V 2.0 ⎯ ⎯ Seiko Instruments Inc. 1 4 μA 19 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 10. S-8750xxE Series Item Table 15 (Unless otherwise specified: Ta=25°C, Connect the SENSE pin to the VIN pin.) Test Symbol Condition Min. Typ. Max. Unit circuit Voltage Regulator Output voltage I/O voltage difference VOUT Vdif Line regulation ΔVOUT1 Load regulation ΔVOUT2 Input voltage Temperature coefficient of VOUT Output voltage during voltage detection Voltage Detector Operating voltage Temperature characteristic of −VDET VIN ΔVOUT ΔTa VOUTOFF Vopr Δ − VDET ΔTa Detection voltage −VDET Sink current IDOUT Leakage current ILEAK SENSE pin input current lSENSE Hysteresis width Total Current consumption VIN=−VDET (Typ.)−1V, RL=1 MΩ ⎯ Ta=−40°C to +85°C S-875077E S-875061E S-875077E S-875061E Nch, VDS=0.5 V VIN=1.3 V VIN=2.4 V VIN=3.6 V Nch, VDS=24 V, VIN=−VDET (Typ.) +2 V VIN=7 V, S-875077E VSENSE=−VDET (Typ.) S-875061E +2 V 4.88 5.00 5.12 ⎯ 0.15 0.40 ⎯ 15 50 ⎯ 15 50 ⎯ ⎯ 24 V ⎯ ±0.38 ±1.52 mV /°C ⎯ ⎯ 0.1 V 6 1.3 ⎯ 24 ±2.4 ±2.0 7.885 6.247 ⎯ ⎯ ⎯ V mV /°C 2 7.515 5.953 0.25 1.50 3.00 ⎯ ±0.6 ±0.5 7.70 6.10 0.60 2.60 4.50 ⎯ ⎯ 0.1 ⎯ 0.6 1.7 ⎯ 0.7 1.8 −VDET ×0.03 ⎯ −VDET ×0.08 V 2 μA 5 VHYS ⎯ ISS VIN=−VDET (Typ.)+2 V, S-875077E Unloaded S-875061E ⎯ 4 8 ⎯ 4 9 VIN=−VDET (Typ.)−1 V, Shutdown ⎯ 1.5 3.5 lof 20 VIN=7 V, IOUT=30 mA, VSENSE=−VDET (Typ.)+2 V IOUT=30 mA, VSENSE=−VDET (Typ.)+2 V VIN=6 to 24 V, IOUT=30 mA, VSENSE=−VDET (Typ.)+2 V VIN=7 V, IOUT=50 μA to 40 mA, VSENSE=−VDET (Typ.)+2 V ⎯ VIN=7 V, IOUT=30 mA, Ta=−40°C to +85°C, VSENSE=−VDET (Typ.)+2 V Seiko Instruments Inc. V 1 mV V mA 4 μA 7 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 11. S-8730xxE Series Item Table 16 (Unless otherwise specified: Ta=25°C, Connect the SENSE pin to the VIN pin.) Test Symbol Condition Min. Typ. Max. Unit circuit Voltage Regulator Output voltage I/O voltage difference VOUT Vdif Line regulation ΔVOUT1 Load regulation ΔVOUT2 Input voltage Temperature coefficient of VOUT Output voltage during voltage detection Voltage Detector Operating voltage Temperature characteristic of −VDET Detection voltage VIN ΔVOUT ΔTa VOUTOFF Vopr Δ − VDET ΔTa −VDET VIN=5 V, IOUT=30 mA, VSENSE=−VDET (Typ.)+2 V IOUT=30 mA, VSENSE=−VDET (Typ.)+2 V VIN=4 to 24 V, IOUT=30 mA, VSENSE=−VDET (Typ.)+2 V VIN=5 V, IOUT=50 μA to 40 mA, VSENSE=−VDET (Typ.)+2 V ⎯ VIN=5 V, IOUT=30 mA, Ta=−40°C to +85°C, VSENSE=−VDET (Typ.)+2 V VIN=−VDET (Typ.)−1 V, RL=1 MΩ ⎯ Ta=−40°C to +85°C S-873082E S-873062E S-873082E S-873062E VIN=1.3 V VIN=2.4 V VIN=3.6 V 2.928 3.000 3.072 ⎯ 0.45 0.70 ⎯ 15 50 ⎯ 15 50 ⎯ ⎯ 24 V ⎯ ±0.23 ±0.92 mV /°C ⎯ ⎯ 0.1 V 6 1.3 ⎯ ⎯ 8.003 6.051 0.25 1.50 3.00 ⎯ ±0.6 ±0.5 8.200 6.200 0.60 2.60 4.50 24 ±2.4 ±2.0 8.397 6.349 ⎯ ⎯ ⎯ V mV /°C 2 ⎯ ⎯ 0.1 ⎯ 0.6 1.7 ⎯ 0.6 1.8 Sink current IDOUT Leakage current ILEAK SENSE pin input current lSENSE Hysteresis width VHYS ⎯ −VDET ×0.03 ⎯ −VDET ×0.08 ISS lof VIN=−VDET (Typ.)+2 V, Unloaded VIN=−VDET (Typ.)−1 V, Shutdown ⎯ ⎯ 4 1.5 8 3.5 Total Current consumption Nch, VDS=0.5 V Nch, VDS=24 V, VIN=−VDET (Typ.)+2 V VIN=5 V, S-873082E VSENSE=−VDET (Typ.)+ S-873062E 2V Seiko Instruments Inc. V 1 mV V mA 4 μA 7 V 2 μA 5 21 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 12. S-873330E Item Table 17 (Unless otherwise specified: Ta=25°C, Connect the SENSE pin to the VIN pin.) Test Symbol Condition Min. Typ. Max. Unit circuit Voltage Regulator Output voltage I/O voltage difference VOUT Vdif Line regulation ΔVOUT1 Load regulation ΔVOUT2 Input voltage Temperature coefficient of VOUT Output voltage during voltage detection Voltage Detector Operating voltage Temperature characteristic of −VDET VIN ΔVOUT ΔTa VOUTOFF Vopr Δ − VDET ΔTa VIN=5.3 V, IOUT=30 mA, VSENSE=−VDET (Typ.)+2 V IOUT=30 mA, VSENSE=−VDET (Typ.)+2 V VIN=4.3 to 24 V, IOUT=30 mA, VSENSE=−VDET (Typ.)+2 V VIN=5.3 V, IOUT=50 μA to 40 mA, VSENSE=−VDET (Typ.)+2 V ⎯ VIN=5.3 V, IOUT=30 mA, Ta=−40°C to +85°C, VSENSE=−VDET (Typ.)+2 V VIN=−VDET (Typ.)−1 V, RL=1 MΩ ⎯ Ta=−40°C to +85°C 3.220 3.300 3.380 ⎯ 0.45 0.70 ⎯ 15 50 ⎯ 15 50 ⎯ ⎯ 24 V ⎯ ±0.25 ±1.00 mV /°C ⎯ ⎯ 0.1 V 6 1.3 ⎯ 24 V 2 ⎯ ±0.2 ±0.8 mV /°C 2.928 3.000 3.072 V 0.25 1.50 0.60 2.60 ⎯ ⎯ mA ⎯ ⎯ 0.1 ⎯ 0.5 1.3 Detection voltage −VDET Sink current IDOUT Leakage current ILEAK SENSE pin input current lSENSE Hysteresis width VHYS ⎯ −VDET ×0.03 ⎯ −VDET ×0.08 ISS lof VIN=−VDET (Typ.)+2 V, Unloaded VIN=−VDET (Typ.)−1 V, Shutdown ⎯ ⎯ 4 1.5 8 3.5 Total Current consumption 22 ⎯ Nch, VIN=1.3 V VDS=0.5 V VIN=2.4 V Nch, VDS=24 V, VIN=−VDET (Typ.)+2 V VIN=5.3 V, VSENSE=−VDET (Typ.)+2 V Seiko Instruments Inc. V 1 mV 4 μA 7 V 2 μA 5 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 13. S-8725xxE Series Item Table 18 (Unless otherwise specified: Ta=25°C, Connect the SENSE pin to the VIN pin.) Test Symbol Condition Min. Typ. Max. Unit circuit Voltage Regulator Output voltage I/O voltage difference VOUT Vdif Line regulation ΔVOUT1 Load regulation ΔVOUT2 Input voltage Temperature coefficient of VOUT Output voltage during voltage detection Voltage Detector Operating voltage Temperature characteristic of −VDET Detection voltage VIN ΔVOUT ΔTa VOUTOFF VIN=4.5 V, IOUT=30 mA, VSENSE=−VDET (Typ.)+2 V IOUT=30 mA, VSENSE=−VDET (Typ.)+2 V VIN=4.5 to 24 V, IOUT=30 mA, VSENSE=−VDET (Typ.)+2 V VIN=4.5 V, IOUT=50 μA to 40 mA, VSENSE=−VDET (Typ.)+2 V ⎯ VIN=4.5 V, IOUT=30 mA, Ta=−40°C to +85°C, VSENSE=−VDET (Typ.)+2 V VIN=−VDET (Typ.)−1 V, RL=1 MΩ ⎯ Vopr Δ − VDET ΔTa −VDET Sink current IDOUT Leakage current ILEAK SENSE pin input current lSENSE Hysteresis width Ta=−40°C to +85°C S-872548E S-872530E to S-872526E S-872548E S-872530E S-872526E Nch, VDS=0.5 V VIN=1.3 V VIN=2.4 V VIN=3.6 V Nch, VDS=24 V, VIN=−VDET (Typ.)+2 V VIN=4.5V, S-872548E to VSENSE=−VDET (Typ.) S-872526E +2 V S-872548E to S-872530E VHYS S-872526E Total Current consumption ISS lof VIN=−VDET (Typ.)+2 V, Unloaded VIN=−VDET (Typ.)−1 V, Shutdown Seiko Instruments Inc. 2.440 2.500 2.560 ⎯ 0.65 1.00 ⎯ 15 50 ⎯ 15 50 ⎯ ⎯ 24 V ⎯ ±0.23 ±0.92 mV /°C ⎯ ⎯ 0.1 V 6 1.3 ⎯ ⎯ ±0.5 24 ±2.0 V 2 ⎯ ±0.2 ±0.8 4.685 2.928 2.538 0.25 1.50 3.00 4.800 3.000 2.600 0.60 2.60 4.50 4.915 3.072 2.662 ⎯ ⎯ ⎯ ⎯ ⎯ 0.1 ⎯ 0.5 1.3 −VDET ×0.03 −VDET ×0.02 ⎯ ⎯ ⎯ ⎯ 4 1.5 −VDET ×0.08 −VDET ×0.05 8 3.5 V 1 mV mV /°C V mA 4 μA 7 V 2 μA 5 23 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 14. S-875087F Table 19 Item Symbol Condition Voltage Regulator Output voltage I/O voltage difference Line regulation VOUT Vdif ΔVOUT1 Load regulation ΔVOUT2 Input voltage VIN ΔVOUT ΔTa VIN=7 V, IOUT=30 mA IOUT=30 mA VIN=6 to 24 V, IOUT=30 mA VIN=7 V, IOUT=50 μA to 40 mA ⎯ Temperature coefficient of VOUT (Unless otherwise specified: Ta=25°C) Test Min. Typ. Max. Unit circuit 4.88 ⎯ ⎯ 5.00 0.15 15 5.12 0.40 50 ⎯ 15 50 ⎯ ⎯ 24 V ⎯ ±0.38 ±1.52 mV /°C 1.3 ⎯ 24 V CD=4.7 nF 15 27 41 Ta=−40°C to +85°C ⎯ ±0.7 ±2.8 ms mV /°C 8.600 8.700 8.800 V VIN=1.3 V VIN=2.4 V 0.25 1.50 0.60 2.60 ⎯ ⎯ mA 4 VIN=3.6 V 3.00 4.50 ⎯ ⎯ 0.085 ⎯ ⎯ 0.1 0.215 μA V 2 ⎯ 4 8 μA 5 VIN=7 V, IOUT=30 mA, Ta=−40°C to +85°C V 1 mV Voltage Detector Operating voltage Delay time*1 Release voltage vs Temperature Release voltage (Overcharge detection voltage) Sink current Leakage current Hysteresis width Total Current consumption*2 ⎯ Vopr tpd Δ + VDET ΔTa +VDET IDOUT ILEAK VHYS ISS ⎯ Nch, VDS=0.5 V Nch, VDS=24 V, VIN=15 V ⎯ VIN=7 V, Unloaded *1. tpd (ms)=(3.18min., 5.74typ., 8.73max.)×CD(nF) *2. Excluding the charging current of CD. 24 Seiko Instruments Inc. 2 3 2 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series „ Measurement Circuits 2. 1. VIN VOUT (SENSE) VIN (SENSE) CL ( VPF) VSS A ( VPF) V VOUT 100 kΩ VOR VSS Figure 8 V Figure 9 4. 3. VOUT VIN VOUT 100 kΩ VIN (SENSE) VOR VSS ( VPF) CD CD VOR A VSS Figure 10 V Figure 11 6. 5. A VIN VIN (SENSE) VSS VOUT RL=1 MΩ (SENSE) ( VPF) ( VPF ) VSS Figure 12 V Figure 13 7. VIN A SENSE VSS Figure 14 Seiko Instruments Inc. 25 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series „ Operation Timing Charts 1. Voltage regulator (C/G type) VIN [V] VSS t [s] VOUT [V] *2 VSS *1 *1 t1 t [s] t2 VPF [V] H L t [s] VSS *1. Indicates shutdown state. When the load current (IOUT) is less than 1 μA, the output voltage (VOUT) is not always VSS level. *2. When the VOUT is shorted at t1, VOUT becomes VSS level. When the short of VOUT is removed at t2, VOUT returns to normal output. Figure 15 2. Voltage detector (A/B/F type) VIN or VOUT [V] VHYS +VDET −VDET t [s] VOR [V] tpd*1 tpd*1 tpd*1 t [s] *1. Output delay time (tpd) of the voltage detector can be changed with an external capacitance value to CD pin. Delay circuit is not included in C/E/G type. Remark Pull up VOR through a resistor to VIN or VOUT. Figure 16 26 Seiko Instruments Inc. HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series 3. When using the SENSE pin (E type) VIN=VSENSE*1 [V] +VDET −VDET t [s] VOUT [V] t [s] VOR [V] t [s] *1. The SENSE pin is connected to VIN pin. Remark Pull up VOR through a resistor to VOUT. Figure 17 „ Explanation of Terms 1. I/O voltage difference (Vdif) Vdif=VIN1−VOUT1 VOUT1: Initial output voltage VIN1: Input voltage which generates an output voltage (VOUT2) decreased by 5 % from VOUT1 2. Load regulation (ΔVOUT2) ΔVOUT2=VOUT1−VOUT2 VOUT1: Output voltage when IOUT is 50 μA VOUT2: Output voltage when IOUT is 40 mA 3. Line regulation (ΔVOUT1) ΔVOUT1=VOUT1−VOUT2 VOUT1: Output voltage when VIN is 24 V VOUT2: Output voltage when VIN is (VOUT+1) V 4. Hysteresis width (VHYS) VHYS=(+VDET)−(−VDET) +VDET: Release voltage −VDET: Detection voltage Seiko Instruments Inc. 27 HIGH WITHSTAND-VOLTAGE VOLTAGE REGULATOR WITH RESET FUNCTION Rev.8.0_00 S-87x Series „ Operation 1. Reference voltage circuit The reference voltage circuit operates all the time when the voltage is applied to VIN pin and is not affected by the VPF signal. 2. Voltage regulator Figure 18 shows the voltage regulator circuit. The S-87x Series has a Pch MOS transistor as the output control transistor. Reverse current may break IC if VOUT potential is higher than VIN, because a parasitic diode is formed between VIN and VOUT due to the structure of the control transistor. Therefore, keep VOUT lower than VIN+0.3 V. The output voltage of the voltage regulator can be selected as follows: 2.5 V to 5.8 V±2.4 % (0.1 V step) VIN VREF − M1 *1 + VOUT R1 R2 *1. Parasitic diode Figure 18 Voltage regulator circuit Caution For an application with a load current of less than 1 μA, the leakage current of the control transistor M1 increases the output voltage. 3. Short-circuit protection circuit The S-87x Series has a built-in short-circuit protection circuit to protect the element from break caused by a large current in case of a short circuit. The output short current is internally limited to approx. 70 mA. Short-circuit protection circuit has three kinds characteristics according to input voltage (VIN) as shown in Figure 19 to 21. At 5 V Output: (a) VIN/VOUT≥2.0 (b) 1.5≤VIN/VOUT