S-89110/89120 Series
www.ablic.com
www.ablicinc.com
MINI ANALOG SERIES
CMOS OPERATIONAL AMPLIFIER
© ABLIC Inc., 2009-2018
Rev.3.1_03
The mini-analog series is a group of ICs that incorporate a general purpose analog circuit in a small package.
The S-89110/89120 Series is a CMOS type operational amplifier that has a phase compensation circuit, and operates at a
low voltage with low current consumption. These features make this product the ideal solution for small battery-powered
portable equipment.
The S-89110A/89120A Series is a single operational amplifier (one circuit).
The S-89110B/89120B Series is a dual operational amplifier (two circuits).
Features
• Lower operating voltage than the conventional general-purpose:
VDD = 1.8 V to 5.5 V
• Low current consumption (per circuit):
IDD = 50 μA (S-89110 Series)
IDD = 10 μA (S-89120 Series)
• Low input offset voltage:
4.0 mV max.
• No external capacitors required for internal phase compensation
• Output full swing
• Lead-free, Sn 100%, halogen-free*1
*1. Refer to " Product Name Structure" for details.
Applications
•
•
•
•
Mobile phone
Notebook PC
Digital camera
Digital video camera
Packages
•
•
•
•
SC-88A
SOT-23-5
SNT-8A
TMSOP-8
1
MINI ANALOG SERIES
S-89110/89120 Series
CMOS OPERATIONAL AMPLIFIER
Rev.3.1_03
Block Diagrams
1.
S-89110A/89120A Series single operational amplifier (one circuit)
VDD
IN(+)
+
OUT
IN(−)
−
VSS
Figure 1
2.
S-89110B/89120B Series dual operational amplifier (two circuits)
VDD
IN1(+)
+
OUT1
IN1(−)
IN2(+)
−
+
OUT2
IN2(−)
−
VSS
Figure 2
2
MINI ANALOG SERIES
Rev.3.1_03
CMOS OPERATIONAL AMPLIFIER
S-89110/89120 Series
Product Name Structure
Users can select the product type for the S-89110/89120 Series. Refer to "1. Product name" regarding the contents
of product name, "2. Packages" regarding the package drawings and "3. Product name list" regarding the product
type.
1.
Product name
1. 1
SC-88A
S-891
x
0
A NC
-
xxx
-
TF
x
Environmental code
S: Lead-free, halogen-free
G: Lead-free (for details, please contact our sales office)
IC direction in tape specifications*1
Product code (abbreviation)*2
Package name (abbreviation)
NC: SC-88A
Number of circuits
A: 1
Current consumption (per circuit)
1: IDD = 50 μA
2: IDD = 10 μA
*1. Refer to the tape drawing.
*2. Refer to "3. Product name list".
1. 2
SOT-23-5
S-891
x
0
A MC
-
xxx
-
TF
U
Environmental code
U: Lead-free (Sn 100%), halogen-free
IC direction in tape specifications*1
Product code (abbreviation)*2
Package name (abbreviation)
MC: SOT-23-5
Number of circuits
A: 1
Current consumption (per circuit)
1: IDD = 50 μA
2: IDD = 10 μA
*1. Refer to the tape drawing.
*2. Refer to "3. Product name list".
3
MINI ANALOG SERIES
S-89110/89120 Series
1. 3
CMOS OPERATIONAL AMPLIFIER
Rev.3.1_03
SNT-8A, TMSOP-8
S-891
x
0
B
xx
-
xxx
-
TF
U
Environmental code
U: Lead-free (Sn 100%), halogen-free
IC direction in tape specifications*1
Product code (abbreviation)*2
Package name (abbreviation)
PH: SNT-8A
FM: TMSOP-8
Number of circuits
B: 2
Current consumption (per circuit)
1: IDD = 50 μA
2: IDD = 10 μA
*1. Refer to the tape drawing.
*2. Refer to "3. Product name list".
2.
Packages
Table 1
Dimension
Tape
Reel
Land
NP005-B-P-SD
MP005-A-P-SD
PH008-A-P-SD
FM008-A-P-SD
NP005-B-C-SD
MP005-A-C-SD
PH008-A-C-SD
FM008-A-C-SD
NP005-B-R-SD
MP005-A-R-SD
PH008-A-R-SD
FM008-A-R-SD
－
－
PH008-A-L-SD
－
Number of Circuit
Package
Package Name
SC-88A
SOT-23-5
SNT-8A
TMSOP-8
3.
Package Drawing Codes
Product name list
Table 2
Product Name
Current
Consumption
(per circuit)
S-89110ANC-1A1-TFz
S-89110AMC-1A1-TFU
S-89110BPH-H4A-TFU
S-89110BFM-H4A-TFU
S-89120ANC-1A2-TFz
S-89120AMC-1A2-TFU
S-89120BPH-H4B-TFU
S-89120BFM-H4B-TFU
*1.
50 μA
50 μA
50 μA
50 μA
10 μA
10 μA
10 μA
10 μA
Gain-bandwidth
175 kHz
175 kHz
175 kHz
175 kHz
35 kHz
35 kHz
35 kHz
35 kHz
*1
1
1
2
2
1
1
2
2
SC-88A
SOT-23-5
SNT-8A
TMSOP-8
SC-88A
SOT-23-5
SNT-8A
TMSOP-8
The value when VDD = 3.0 V
Remark 1. z: G or S
2. Please select products of environmental code = U for Sn 100%, halogen-free products.
4
MINI ANALOG SERIES
Rev.3.1_03
CMOS OPERATIONAL AMPLIFIER
S-89110/89120 Series
Pin Configurations
1.
SC-88A
Top view
5
Table 3
4
1 2 3
Figure 3
2.
Pin No.
Symbol
1
2
3
4
5
IN(+)
VSS
IN(−)
OUT
VDD
(Product with 1 circuit)
Description
Non-inverted input pin
GND pin
Inverted input pin
Output pin
Positive power supply pin
SOT-23-5
Top view
5
Table 4
4
1 2 3
Pin No.
Symbol
1
2
3
4
5
IN(+)
VSS
IN(−)
OUT
VDD
(Product with 1 circuit)
Description
Non-inverted input pin
GND pin
Inverted input pin
Output pin
Positive power supply pin
Figure 4
3.
SNT-8A
Top view
1
2
3
4
Table 5
8
7
6
5
Figure 5
Pin No.
Symbol
1
2
3
4
5
6
7
8
OUT1
IN1(−)
IN1(+)
VSS
IN2(+)
IN2(−)
OUT2
VDD
(Product with 2 circuits)
Description
Output pin 1
Inverted input pin 1
Non-inverted input pin 1
GND pin
Non-inverted input pin 2
Inverted input pin 2
Output pin 2
Positive power supply pin
4. TMSOP-8
Top view
1
2
3
4
Table 6
8
7
6
5
Figure 6
Pin No.
1
2
3
4
5
6
7
8
Symbol
OUT1
IN1(−)
IN1(+)
VSS
IN2(+)
IN2(−)
OUT2
VDD
(Product with 2 circuits)
Description
Output pin 1
Inverted input pin 1
Non-inverted input pin 1
GND pin
Non-inverted input pin 2
Inverted input pin 2
Output pin 2
Positive power supply pin
5
MINI ANALOG SERIES
S-89110/89120 Series
CMOS OPERATIONAL AMPLIFIER
Rev.3.1_03
Absolute Maximum Ratings
Table 7
Item
Power supply voltage
Input voltage
Output voltage
Differential input voltage
Output pin current
SC-88A
SOT-23-5
Power dissipation
SNT-8A
TMSOP-8
Operating ambient temperature
Storage temperature
*1.
(Ta = +25°C unless otherwise specified)
Absolute Maximum Rating
Unit
VSS − 0.3 to VSS + 10.0
V
VSS − 0.3 to VSS + 7.0 (7.0 max.)
V
VSS − 0.3 to VDD + 0.3 (7.0 max.)
V
±7.0
V
13
mA
9
mA
*1
350
mW
600*1
mW
450*1
mW
650*1
mW
−40 to +85
°C
−55 to +125
°C
Symbol
VDD
VIN
VOUT
VIND
ISINK
ISOURCE
PD
Topr
Tstg
When mounted on board
[Mounted board]
(1) Board size:
114.3 mm × 76.2 mm × t1.6 mm
(2) Board name: JEDEC STANDARD51-7
Caution
The absolute maximum ratings are rated values exceeding which the product could suffer
physical damage. These values must therefore not be exceeded under any conditions.
Power Dissipation (PD) [mW]
700
600
TMSOP-8
500
SOT-23-5
400
SNT-8A
300
200
SC-88A
100
0
0
50
100
150
Ambient Temperature (Ta) [°C]
Figure 7
6
Power Dissipation of Package (When Mounted on Board)
MINI ANALOG SERIES
Rev.3.1_03
CMOS OPERATIONAL AMPLIFIER
S-89110/89120 Series
Electrical Characteristics
Table 8
Item
Range of operating power supply
voltage
1.
Symbol
Condition
−
VDD
(Ta = +25°C unless otherwise specified)
Test
Min.
Typ. Max. Unit
Circuit
1.8
−
5.5
V
−
VDD = 5.0 V
Table 9
(Ta = +25°C unless otherwise specified)
DC Electrical Characteristics (VDD = 5.0 V)
Item
Symbol
Current consumption (per circuit)
IDD
Input offset voltage
VIO
ΔVIO
ΔTa
Input offset voltage drift
Input offset current
Input bias current
Common-mode input voltage range
IIO
IBIAS
VCMR
Voltage gain (open loop)
AVOL
Maximum output swing voltage
VOH
VOL
Condition
S-89110 Series
S-89120 Series
−
Ta = −40°C to +85°C
−
−
−
VSS + 0.5 V ≤ VOUT ≤ VDD − 0.5 V,
VCMR = 2.5 V
RL = 1.0 MΩ
RL = 1.0 MΩ
Min.
Typ.
Max.
Unit
Test
Circuit
−
−
−4
50
10
±3
120
30
+4
μA
μA
mV
5
5
1
−
±10
−
μV/°C
1
−
−
0
1
1
−
−
−
4.3
pA
pA
V
−
−
2
70
80
−
dB
8
4.9
−
−
−
−
0.1
V
V
3
4
Common-mode input signal
rejection ratio
Power supply voltage rejection ratio
CMRR
−
60
70
−
dB
2
PSRR
Source current
ISOURCE VOUT = 0 V
−
S-89110 Series
S-89120 Series
Sink current
ISINK
60
120
25
9
70
−
−
−
−
−
−
−
dB
μA
μA
mA
1
6
6
7
VOUT = 0.5 V
Table 10
(Ta = +25°C unless otherwise specified)
AC Electrical Characteristics (VDD = 5.0 V)
Item
Symbol
Slew rate
SR
Gain-bandwidth product
GBP
Condition
Min.
Typ.
Max.
Unit
RL = 1.0 MΩ, CL = 15 pF S-89110 Series
(Refer to Figure 16)
S-89120 Series
S-89110 Series
S-89120 Series
−
−
−
−
0.07
0.015
180
40
−
−
−
−
V/μs
V/μs
kHz
kHz
7
MINI ANALOG SERIES
S-89110/89120 Series
2.
CMOS OPERATIONAL AMPLIFIER
Rev.3.1_03
VDD = 3.0 V
Table 11
(Ta = +25°C unless otherwise specified)
DC Electrical Characteristics (VDD = 3.0 V)
Item
Symbol
Current consumption (per circuit)
IDD
Input offset voltage
VIO
ΔVIO
ΔTa
Input offset voltage drift
Input offset current
Input bias current
Common-mode input voltage range
IIO
IBIAS
VCMR
Voltage gain (open loop)
AVOL
Maximum output swing voltage
VOH
VOL
Condition
S-89110 Series
S-89120 Series
−
Ta = −40°C to +85°C
−
−
−
VSS + 0.5 V ≤ VOUT ≤ VDD − 0.5 V,
VCMR = 1.5 V
RL = 1.0 MΩ
RL = 1.0 MΩ
Min.
Typ.
Max.
Unit
Test
Circuit
−
−
−4
50
10
±3
120
30
+4
μA
μA
mV
5
5
1
−
±10
−
μV/°C
1
−
−
0
1
1
−
−
−
2.3
pA
pA
V
−
−
2
70
80
−
dB
8
2.9
−
−
−
−
0.1
V
V
3
4
Common-mode input signal
rejection ratio
Power supply voltage rejection ratio
CMRR
−
60
70
−
dB
2
PSRR
Source current
ISOURCE VOUT = 0 V
−
S-89110 Series
S-89120 Series
Sink current
ISINK
60
120
25
8
70
−
−
−
−
−
−
−
dB
μA
μA
mA
1
6
6
7
VOUT = 0.5 V
Table 12
AC Electrical Characteristics (VDD = 3.0 V)
Item
Symbol
Slew rate
SR
Gain-bandwidth product
GBP
8
(Ta = +25°C unless otherwise specified)
Condition
RL = 1.0 MΩ, CL = 15 pF S-89110 Series
(Refer to Figure 16)
S-89120 Series
S-89110 Series
S-89120 Series
Min.
−
−
−
−
Typ.
0.07
0.015
175
35
Max.
−
−
−
−
Unit
V/μs
V/μs
kHz
kHz
MINI ANALOG SERIES
Rev.3.1_03
3.
CMOS OPERATIONAL AMPLIFIER
S-89110/89120 Series
VDD = 1.8 V
Table 13
(Ta = +25°C unless otherwise specified)
DC Electrical Characteristics (VDD = 1.8 V)
Item
Symbol
Current consumption (per circuit)
IDD
Input offset voltage
VIO
ΔVIO
ΔTa
Input offset voltage drift
Input offset current
Input bias current
Common-mode input voltage range
IIO
IBIAS
VCMR
Voltage gain (open loop)
AVOL
Maximum output swing voltage
VOH
VOL
Condition
S-89110 Series
S-89120 Series
−
Ta = −40°C to +85°C
−
−
−
VSS + 0.5 V ≤ VOUT ≤ VDD − 0.5 V,
VCMR = 0.9 V
RL = 1.0 MΩ
RL = 1.0 MΩ
Min.
Typ.
Max.
Unit
Test
Circuit
−
−
−4
50
10
±3
120
30
+4
μA
μA
mV
5
5
1
−
±10
−
μV/°C
1
−
−
0
1
1
−
−
−
1.1
pA
pA
V
−
−
2
70
80
−
dB
8
1.7
−
−
−
−
0.1
V
V
3
4
Common-mode input signal
rejection ratio
Power supply voltage rejection ratio
CMRR
−
60
70
−
dB
2
PSRR
Source current
ISOURCE VOUT = 0 V
−
S-89110 Series
S-89120 Series
Sink current
ISINK
60
100
20
5
70
−
−
−
−
−
−
−
dB
μA
μA
mA
1
6
6
7
VOUT = 0.5 V
Table 14
AC Electrical Characteristics (VDD = 1.8 V)
Item
Symbol
Slew rate
SR
Gain-bandwidth product
GBP
(Ta = +25°C unless otherwise specified)
Condition
RL = 1.0 MΩ, CL = 15 pF S-89110 Series
(Refer to Figure 16)
S-89120 Series
S-89110 Series
S-89120 Series
Min.
−
−
−
−
Typ.
0.07
0.015
160
30
Max.
−
−
−
−
Unit
V/μs
V/μs
kHz
kHz
9
MINI ANALOG SERIES
S-89110/89120 Series
CMOS OPERATIONAL AMPLIFIER
Rev.3.1_03
Test Circuit (Per Circuit)
1.
Power supply voltage rejection ratio, input offset voltage
VDD
• Power supply voltage rejection ratio (PSRR)
The power supply voltage rejection ratio (PSRR) can be
calculated by the following expression, with VOUT measured at
each VDD.
RF
RS
Test conditions:
−
VOUT
+
RS
When VDD = 1.8 V: VDD = VDD1, VOUT = VOUT1,
When VDD = 5.0 V: VDD = VDD2, VOUT = VOUT2
RF
PSRR = 20 log
VCMR = VDD / 2
×
RF + RS
RS
• Input offset voltage (VIO)
VDD
× RS
VIO = VOUT −
2
RF + RS
Figure 8
2.
VDD1 − VDD2
VDD1
VDD2
VOUT1 − 2 − VOUT2 − 2
Common-mode input signal rejection ratio, common-mode input voltage range
VDD
• Common-mode input signal rejection ratio (CMRR)
The common-mode input signal rejection ratio (CMRR) can be
calculated by the following expression, with VOUT measured at
each VIN.
RF
RS
−
+
RS
Test conditions:
VOUT
When VIN = VCMR Max.: VIN = VIN1, VOUT = VOUT1,
When VIN = VDD / 2: VIN = VIN2, VOUT = VOUT2
RF
CMRR = 20 log
VIN
VIN1 − VIN2
RF + RS
×
RS
VOUT1 − VOUT2
VDD / 2
• Common-mode input voltage range (VCMR)
Figure 9
10
The common-mode input voltage range is the range of VIN in
which VOUT satisfies the common-mode input signal rejection
ratio specifications.
MINI ANALOG SERIES
Rev.3.1_03
3.
CMOS OPERATIONAL AMPLIFIER
S-89110/89120 Series
Maximum output swing voltage (VOH)
VDD
• Maximum output swing voltage (VOH)
−
VOH
+
Test conditions:
VDD
VIN1 = 2 − 0.1 V
VDD
VIN2 = 2 + 0.1 V
RL = 1 MΩ
RL
VIN1
VIN2
Figure 10
4.
Maximum output swing voltage (VOL)
VDD
• Maximum output swing voltage (VOL)
RL
−
+
VIN1
VOL
Test conditions:
VDD
VIN1 = 2 + 0.1 V
VDD
VIN2 = 2 − 0.1 V
RL = 1 MΩ
VIN2
Figure 11
5.
Current consumption
VDD
• Current consumption (IDD)
A
−
+
VCMR = VDD / 2
Figure 12
11
MINI ANALOG SERIES
S-89110/89120 Series
6.
CMOS OPERATIONAL AMPLIFIER
Rev.3.1_03
Source current
VDD
• Source current (ISOURCE)
Test conditions:
VDD
VIN1 = 2 − 0.5 V
VDD
VIN2 = 2 + 0.5 V
−
+
VIN1
A
VIN2
Figure 13
7.
Sink current
VDD
VOUT
• Sink current (ISINK)
Test conditions:
A
−
+
VIN1
VIN2
Figure 14
12
VOUT = VSS + 0.5 V
VDD
VIN1 = 2 + 0.5 V
VDD
VIN2 = 2 − 0.5 V
MINI ANALOG SERIES
Rev.3.1_03
8.
CMOS OPERATIONAL AMPLIFIER
S-89110/89120 Series
Voltage gain (open loop)
RF
VDD
VDDN
RS
−
+
D.U.T
+
RS
VOUT
NULL
−
RF
VCMR = VDD / 2
VM
VSSN
Figure 15
• Voltage-gain (open loop) (AVOL)
The voltage gain (AVOL) can be calculated by the following expression, with VOUT measured at each VM.
Test conditions:
When VM = VDD − 0.5 V: VM = VM1, VOUT = VOUT1,
When VM = VSS + 0.5 V: VM = VM2, VOUT = VOUT2
AVOL = 20 log
9.
RF + RS
VM1 − VM2
×
RS
VOUT1 − VOUT2
Slew rate (SR)
Measured by the voltage follower circuit.
tR = tF = 20 ns (VSS to VCMR Max.)
VCMR Max.
VIN(+)
VSS
(= 0 V)
tTHL
VCMR Max. × 0.9
VOUT
(= VIN(−))
tTLH
VCMR Max. × 0.1
VCMR Max. × 0.8
tTLH
VCMR Max. × 0.8
SR =
tTHL
SR =
Figure 16
13
MINI ANALOG SERIES
S-89110/89120 Series
CMOS OPERATIONAL AMPLIFIER
Rev.3.1_03
Precautions
• Generally an operational amplifier may cause oscillation, depending on the selection of external parts. Perform
thorough evaluation using the actual application to set the constant.
• Do not apply an electrostatic discharge to this IC that exceeds performance ratings of the built-in electrostatic
protection circuit.
• ABLIC Inc. claims no responsibility for any disputes arising out of or in connection with any infringement by
products including this IC of patents owned by a third party.
14
MINI ANALOG SERIES
Rev.3.1_03
CMOS OPERATIONAL AMPLIFIER
S-89110/89120 Series
Characteristics (Typical Data)
1.
Current consumption (per circuit) vs. Power supply voltage
1. 1
S-89110 Series
1. 2
S-89120 Series
IDD − VDD, VSS = 0 V
IDD − VDD, VSS = 0 V
100
20
85°C
25°C
15
60
IDD [μA]
IDD [μA]
80
40
Ta = −40°C
20
0
0
1
2
3
25°C
10
Ta = −40°C
5
4
5
0
6
0
1
2
VDD [V]
3
VDD [V]
4
5
6
Voltage gain vs. Frequency
2. 1
S-89110 Series
2. 2
S-89120 Series
AVOL − f, VDD = 3.0 V, VSS = 0 V
100
AVOL − f, VDD = 3.0 V, VSS = 0 V
100
25°C
60
25°C
80
85°C
Ta = −40°C
40
20
0
0.001 0.01
AVOL[dB]
80
AVOL [dB]
2.
85°C
60
85°C
Ta = −40°C
40
20
0.1
1
f [kHz]
10
100
1000
0
0.001 0.01
0.1
1
f [kHz]
10
100
1000
15
MINI ANALOG SERIES
S-89110/89120 Series
3.
CMOS OPERATIONAL AMPLIFIER
Rev.3.1_03
Output current
3. 1
ISOURCE vs. Power supply voltage
3. 1. 1
S-89110 Series
3. 1. 2
S-89120 Series
ISOURCE − VDD, VOUT = 0 V, VSS = 0 V
ISOURCE − VDD, VOUT = 0 V, VSS = 0 V
500
100
85°C
25°C
300
200
Ta = −40°C
100
60
40
Ta = −40°C
20
0
0
0
1
2
3
4
5
6
0
1
2
VDD [V]
3. 2
3
VDD [V]
4
S-89110 Series
3. 2. 2
6
S-89120 Series
ISINK − VDD, VOUT = 0.5 V, VSS = 0 V
ISINK − VDD, VOUT = 0.5 V, VSS = 0 V
40
30
30
ISINK [mA]
40
Ta = −40°C
20
25°C
10
Ta = −40°C
20
25°C
10
85°C
85°C
0
0
0
1
2
3
VDD [V]
16
5
ISINK vs. Power supply voltage
3. 2. 1
ISINK [mA]
85°C
25°C
80
ISOURCE [μA]
ISOURCE [μA]
400
4
5
6
0
1
2
3
VDD [V]
4
5
6
MINI ANALOG SERIES
Rev.3.1_03
3. 3
CMOS OPERATIONAL AMPLIFIER
S-89110/89120 Series
Output voltage (VOUT) vs. ISOURCE
3. 3. 1
S-89110 Series
VOUT − ISOURCE, VDD = 1.8 V, VSS = 0 V
VOUT − ISOURCE, VDD = 3.0 V, VSS = 0 V
2.0
3.0
2.5
25°C
2.0
VOUT [V]
1.5
1.0
VOUT [V]
Ta = −40°C
85°C
0.5
25°C
85°C
1.5
1.0
Ta = −40°C
0.5
0.0
0.0
0
50
100 150 200 250 300 350
ISOURCE [μA]
0
50
100 150 200 250 300 350
ISOURCE [μA]
VOUT − ISOURCE, VDD = 5.0 V, VSS = 0 V
5.0
25°C
VOUT [V]
4.0
85°C
3.0
2.0
Ta = −40°C
1.0
0.0
0
3. 3. 2
50
100 150 200 250 300 350
ISOURCE [μA]
S-89120 Series
VOUT − ISOURCE, VDD = 1.8 V, VSS = 0 V
VOUT − ISOURCE, VDD = 3.0 V, VSS = 0 V
2.0
3.0
85°C
VOUT [V]
VOUT [V]
1.5
1.0
0.5
25°C
2.5
25°C
Ta = −40°C
2.0
85°C
1.5
1.0
Ta = −40°C
0.5
0.0
0.0
0
10
20
30
40
50
ISOURCE [μA]
60
70
0
10
20
30
40
50
ISOURCE [μA]
60
70
VOUT − ISOURCE, VDD = 5.0 V, VSS = 0 V
5.0
VOUT [V]
4.0
85°C
25°C
3.0
2.0
Ta = −40°C
1.0
0.0
0
10
20
30
40
50
ISOURCE [μA]
60
70
17
MINI ANALOG SERIES
S-89110/89120 Series
3. 4
CMOS OPERATIONAL AMPLIFIER
Rev.3.1_03
Output voltage (VOUT) vs. ISINK
3. 4. 1
S-89110 Series
VOUT − ISINK, VDD = 1.8 V, VSS = 0 V
VOUT − ISINK, VDD = 3.0 V, VSS = 0 V
2.0
3.0
1.0
VOUT [V]
VOUT [V]
2.5
25°C
1.5
85°C
0.5
Ta = −40°C
25°C
2.0
1.5
85°C
1.0
Ta = −40°C
0.5
0.0
0.0
0
5
10
ISINK [mA]
15
20
0
10
20
ISINK [mA]
30
40
VOUT − ISINK, VDD = 5.0 V, VSS = 0 V
5.0
VOUT [V]
4.0
25°C
3.0
2.0
85°C
Ta = −40°C
1.0
0.0
0
3. 4. 2
20
40
ISINK [mA]
60
80
S-89120 Series
VOUT − ISINK, VDD = 1.8 V, VSS = 0 V
VOUT − ISINK, VDD = 3.0 V, VSS = 0 V
2.0
3.0
2.5
25°C
1.0
VOUT [V]
VOUT [V]
1.5
85°C
0.5
Ta = −40°C
85°C
1.0
Ta = −40°C
0.0
0
5
10
ISINK [mA]
15
20
VOUT − ISINK, VDD = 5.0 V, VSS = 0 V
5.0
4.0
VOUT [V]
1.5
0.5
0.0
25°C
3.0
85°C
2.0
Ta = −40°C
1.0
0.0
0
18
25°C
2.0
20
40
ISINK [mA]
60
80
0
10
20
ISINK [mA]
30
40
MINI ANALOG SERIES
Rev.3.1_03
CMOS OPERATIONAL AMPLIFIER
S-89110/89120 Series
Marking Specifications
1.
SC-88A
Top view
5
(1) to (3):
4
Product Code (refer to Product Name vs. Product Code)
(1) (2) (3)
1
2
3
Product Name vs. Product Code
Product Code
(1)
(2)
(3)
Product Name
S-89110ANC-1A1-TFz
1
A
1
S-89120ANC-1A2-TFz
1
A
2
Remark z: G or S
2.
SOT-23-5
Top view
5
4
(1) to (3):
Product Code (refer to Product Name vs. Product Code)
(4):
Lot number
(1) (2) (3) (4)
1
2
3
Product Name vs. Product Code
Product Name
Product Code
(1)
(2)
(3)
S-89110AMC-1A1-TFU
1
A
1
S-89120AMC-1A2-TFU
1
A
2
19
MINI ANALOG SERIES
S-89110/89120 Series
3.
CMOS OPERATIONAL AMPLIFIER
Rev.3.1_03
SNT-8A
8
Top view
7
6
5
(1):
(2) to (4):
(5), (6):
(7) to (11):
(1) (2) (3) (4)
Blank
Product Code (refer to Product Name vs. Product Code)
Blank
Lot number
(5) (6) (7) (8)
(9) (10) (11)
1
2
3
4
Product Name vs. Product Code
Product Code
(2)
(3)
(4)
Product Name
S-89110BPH-H4A-TFU
H
4
A
S-89120BPH-H4B-TFU
H
4
B
4.
TMSOP-8
8
Top view
7
6
5
(1):
(2) to (4):
(5):
(6) to (8):
(1) (2) (3) (4)
(5) (6) (7) (8)
1
2
3
4
Product Name vs. Product Code
Product Name
Product Code
(2)
(3)
(4)
S-89110BFM-H4A-TFU
H
4
A
S-89120BFM-H4B-TFU
H
4
B
20
Blank
Product Code (refer to Product Name vs. Product Code)
Blank
Lot number
2.0±0.2
1.3±0.1
5
1
4
2
0.65
3
+0.1
0.15 -0.05
0.65
0.2 +0.1
-0.05
No. NP005-B-P-SD-1.2
TITLE
SC88A-B-PKG Dimensions
No.
NP005-B-P-SD-1.2
ANGLE
UNIT
mm
ABLIC Inc.
4.0±0.1
2.0±0.1
1.1±0.1
ø1.55±0.05
0.2±0.05
0.3
4.0±0.1
ø1.05±0.1
(2.25)
2.05±0.1
3 2 1
4
5
Feed direction
No. NP005-B-C-SD-2.0
TITLE
SC88A-B-Carrier Tape
No.
NP005-B-C-SD-2.0
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. NP005-B-R-SD-2.1
TITLE
SC88A-B-Reel
No.
NP005-B-R-SD-2.1
QTY.
ANGLE
UNIT
mm
ABLIC Inc.
3,000
2.9±0.2
1.9±0.2
4
5
1
2
+0.1
0.16 -0.06
3
0.95±0.1
0.4±0.1
No. MP005-A-P-SD-1.3
TITLE
SOT235-A-PKG Dimensions
No.
MP005-A-P-SD-1.3
ANGLE
UNIT
mm
ABLIC Inc.
4.0±0.1(10 pitches:40.0±0.2)
+0.1
ø1.5 -0
+0.2
ø1.0 -0
2.0±0.05
0.25±0.1
4.0±0.1
1.4±0.2
3.2±0.2
3 2 1
4
5
Feed direction
No. MP005-A-C-SD-2.1
TITLE
SOT235-A-Carrier Tape
No.
MP005-A-C-SD-2.1
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. MP005-A-R-SD-1.1
SOT235-A-Reel
TITLE
No.
MP005-A-R-SD-1.1
ANGLE
QTY.
UNIT
mm
ABLIC Inc.
3,000
1.97±0.03
8
7
6
5
3
4
+0.05
1
0.5
2
0.08 -0.02
0.48±0.02
0.2±0.05
No. PH008-A-P-SD-2.1
TITLE
SNT-8A-A-PKG Dimensions
No.
PH008-A-P-SD-2.1
ANGLE
UNIT
mm
ABLIC Inc.
+0.1
ø1.5 -0
2.25±0.05
4.0±0.1
2.0±0.05
ø0.5±0.1
0.25±0.05
0.65±0.05
4.0±0.1
4 321
5 6 78
Feed direction
No. PH008-A-C-SD-2.0
TITLE
SNT-8A-A-Carrier Tape
No.
PH008-A-C-SD-2.0
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. PH008-A-R-SD-1.0
TITLE
SNT-8A-A-Reel
No.
PH008-A-R-SD-1.0
QTY.
ANGLE
UNIT
mm
ABLIC Inc.
5,000
0.52
2.01
2
0.52
0.2 0.3
1.
2.
1
(0.25 mm min. / 0.30 mm typ.)
(1.96 mm ~ 2.06 mm)
1.
2.
3.
4.
0.03 mm
SNT
1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.).
2. Do not widen the land pattern to the center of the package (1.96 mm to 2.06mm).
Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package.
2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm
or less from the land pattern surface.
3. Match the mask aperture size and aperture position with the land pattern.
4. Refer to "SNT Package User's Guide" for details.
1.
2.
(0.25 mm min. / 0.30 mm typ.)
(1.96 mm ~ 2.06 mm)
TITLE
No. PH008-A-L-SD-4.1
SNT-8A-A
-Land Recommendation
PH008-A-L-SD-4.1
No.
ANGLE
UNIT
mm
ABLIC Inc.
2.90±0.2
8
5
1
4
0.13±0.1
0.2±0.1
0.65±0.1
No. FM008-A-P-SD-1.2
TITLE
TMSOP8-A-PKG Dimensions
No.
FM008-A-P-SD-1.2
ANGLE
UNIT
mm
ABLIC Inc.
2.00±0.05
4.00±0.1
4.00±0.1
1.00±0.1
+0.1
1.5 -0
1.05±0.05
0.30±0.05
3.25±0.05
4
1
5
8
Feed direction
No. FM008-A-C-SD-2.0
TITLE
TMSOP8-A-Carrier Tape
FM008-A-C-SD-2.0
No.
ANGLE
UNIT
mm
ABLIC Inc.
16.5max.
13.0±0.3
Enlarged drawing in the central part
13±0.2
(60°)
(60°)
No. FM008-A-R-SD-1.0
TITLE
TMSOP8-A-Reel
No.
FM008-A-R-SD-1.0
QTY.
ANGLE
UNIT
mm
ABLIC Inc.
4,000
Disclaimers (Handling Precautions)
1.
All the information described herein (product data, specifications, figures, tables, programs, algorithms and
application circuit examples, etc.) is current as of publishing date of this document and is subject to change without
notice.
2.
The circuit examples and the usages described herein are for reference only, and do not guarantee the success of
any specific mass-production design.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the reasons other than the products
described herein (hereinafter "the products") or infringement of third-party intellectual property right and any other
right due to the use of the information described herein.
3.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the incorrect information described
herein.
4.
Be careful to use the products within their ranges described herein. Pay special attention for use to the absolute
maximum ratings, operation voltage range and electrical characteristics, etc.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by failures and / or accidents, etc. due to
the use of the products outside their specified ranges.
5.
Before using the products, confirm their applications, and the laws and regulations of the region or country where they
are used and verify suitability, safety and other factors for the intended use.
6.
When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related
laws, and follow the required procedures.
7.
The products are strictly prohibited from using, providing or exporting for the purposes of the development of
weapons of mass destruction or military use. ABLIC Inc. is not liable for any losses, damages, claims or demands
caused by any provision or export to the person or entity who intends to develop, manufacture, use or store nuclear,
biological or chemical weapons or missiles, or use any other military purposes.
8.
The products are not designed to be used as part of any device or equipment that may affect the human body, human
life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control
systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment,
aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses by
ABLIC, Inc. Do not apply the products to the above listed devices and equipments.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by unauthorized or unspecified use of
the products.
9.
In general, semiconductor products may fail or malfunction with some probability. The user of the products should
therefore take responsibility to give thorough consideration to safety design including redundancy, fire spread
prevention measures, and malfunction prevention to prevent accidents causing injury or death, fires and social
damage, etc. that may ensue from the products' failure or malfunction.
The entire system in which the products are used must be sufficiently evaluated and judged whether the products are
allowed to apply for the system on customer's own responsibility.
10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the
product design by the customer depending on the intended use.
11. The products do not affect human health under normal use. However, they contain chemical substances and heavy
metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be
careful when handling these with the bare hands to prevent injuries, etc.
12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used.
13. The information described herein contains copyright information and know-how of ABLIC Inc. The information
described herein does not convey any license under any intellectual property rights or any other rights belonging to
ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any part of this
document described herein for the purpose of disclosing it to a third-party is strictly prohibited without the express
permission of ABLIC Inc.
14. For more details on the information described herein or any other questions, please contact ABLIC Inc.'s sales
representative.
15. This Disclaimers have been delivered in a text using the Japanese language, which text, despite any translations into
the English language and the Chinese language, shall be controlling.
2.4-2019.07
www.ablic.com
工商网监
湘ICP备2023018690号
