S-89230/89240 Series
www.ablic.com
www.ablicinc.com
MINI ANALOG SERIES
CMOS COMPARATOR
© ABLIC Inc., 2009-2010
Rev.3.0_02
The mini-analog series is a group of ICs that incorporate a general purpose analog circuit in a small package.
The S-89230/89240 Series is a CMOS type comparator works on a lower voltage and lower current consumption. These
features make this product the ideal solution for small battery-powered portable equipment.
This product is a dual comparator (with 2 circuits).
Features
Lower operating voltage than the conventional general-purpose:
VDD = 1.8 V to 5.5 V
Low current consumption (per circuit):
IDD = 23 A Typ. (S-89230 Series)
IDD = 5 A Typ. (S-89240 Series)
Low input offset voltage:
4.0 mV Max.
Output full swing
A dual comparator (with 2 circuits)
Lead-free, Sn 100%, halogen-free*1
*1. Refer to “ Product Name Structure” for details.
Applications
Mobile phones
Notebook PCs
Digital cameras
Digital video cameras
Packages
SNT-8A
TMSOP-8
1
MINI ANALOG SERIES
S-89230/89240 Series
CMOS COMPARATOR
Rev.3.0_02
Block Diagram
VDD
IN1()
IN1()
OUT1
IN2()
IN2()
OUT2
VSS
Figure 1
2
MINI ANALOG SERIES
Rev.3.0_02
CMOS COMPARATOR
S-89230/89240 Series
Product Name Structure
Users can select the product type and package for the S-89230/89240 Series. Refer to “1. Product name” regarding
the contents of product name, “2. Package” regarding the package drawings and “3. Product name list” regarding
the product type.
1.
Product name
S-892
x
0
B
C
xxxx
U
Environmental code
U:
Lead-free (Sn 100%), halogen-free
Package abbreviation and IC packing specifications*1
I8T1 : SNT-8A, Tape
K8T2 : TMSOP-8, Tape
Number of circuits
B
:2
Current consumption (per circuit)
3
: IDD = 23 µA
4
: IDD = 5 µA
*1. Refer to the tape specifications.
2.
Package
Package Name
SNT-8A
TMSOP-8
3.
Package
PH008-A-P-SD
FM008-A-P-SD
Drawing Code
Tape
Reel
PH008-A-C-SD
PH008-A-R-SD
FM008-A-C-SD
FM008-A-R-SD
Land
PH008-A-L-SD
Product name list
Table 1
Product name
S-89230BC-I8T1U
S-89230BC-K8T2U
S-89240BC-I8T1U
S-89240BC-K8T2U
*1.
Current consumption
(per circuit)
Rise propagation
delay time*1
Fall propagation
delay time*1
Number of
circuits
23 A
23 A
5 A
5 A
26 s
26 s
100 s
100 s
4 s
4 s
18 s
18 s
2 circuits
2 circuits
2 circuits
2 circuits
Package
SNT-8A
TMSOP-8
SNT-8A
TMSOP-8
The value when VDD = 3.0 V
Remark Please select products of environmental code = U for Sn 100%, halogen-free products.
3
MINI ANALOG SERIES
S-89230/89240 Series
CMOS COMPARATOR
Rev.3.0_02
Pin Configurations
Table 2
SNT-8A
Top view
1
8
2
7
3
6
4
5
Pin No.
1
2
3
4
5
6
7
8
Symbol
OUT1
IN1()
IN1()
VSS
IN2()
IN2()
OUT2
VDD
Description
Output pin 1
Inverted input pin 1
Non-inverted input pin 1
GND pin
Non-inverted input pin 2
Inverted input pin 2
Output pin 2
Positive power supply pin
Figure 2
Table 3
TMSOP-8
Top view
1
8
2
7
3
6
4
5
Figure 3
4
Pin No.
1
2
3
4
5
6
7
8
Symbol
OUT1
IN1()
IN1()
VSS
IN2()
IN2()
OUT2
VDD
Description
Output pin 1
Inverted input pin 1
Non-inverted input pin 1
GND pin
Non-inverted input pin 2
Inverted input pin 2
Output pin 2
Positive power supply pin
MINI ANALOG SERIES
Rev.3.0_02
CMOS COMPARATOR
S-89230/89240 Series
Absolute Maximum Ratings
Table 4
Parameter
Power supply voltage
Input voltage
Output voltage
Differential input voltage
Output pin current
SNT-8A
Power dissipation
TMSOP-8
Operating ambient temperature
Storage temperature
PD
Topr
Tstg
When mounted on board
[Mounted board]
(1) Board size:
114.3 mm 76.2 mm t1.6 mm
(2) Board name: JEDEC STANDARD51-7
Caution
The absolute maximum ratings are rated values exceeding which the product could suffer
physical damage. These values must therefore not be exceeded under any conditions.
700
Power Dissipation (PD) [mW]
*1.
(Ta =25°C unless otherwise specified)
Absolute maximum ratings
Unit
VSS0.3 to VSS7.0
V
VSS0.3 to VSS7.0
V
VSS0.3 to VDD0.3
V
7.0
V
20
mA
*1
450
mW
650*1
mW
40 to 85
°C
55 to 125
°C
Symbol
VDD
VIN
VOUT
VIND
ISINK
600
TMSOP-8
500
400
SNT-8A
300
200
100
0
0
50
100
150
Ambient Temperature (Ta) [C]
Figure 4
Power Dissipation of Package (When Mounted on Board)
5
MINI ANALOG SERIES
S-89230/89240 Series
CMOS COMPARATOR
Rev.3.0_02
Electrical Characteristics
Table 5
Parameter
Range of operating power
supply voltage
1.
Symbol
Conditions
(Ta = 25°C unless otherwise specified)
Test
Min.
Typ.
Max.
Unit
Circuit
VDD
1.8
5.5
V
VDD = 5.0 V
Table 6
(Ta = 25°C unless otherwise specified)
DC Electrical Characteristics (VDD = 5.0 V)
Parameter
Current consumption
(per circuit)
Input offset voltage drift
Input offset voltage
Input offset current
Input bias current
Common-mode input voltage
range
Maximum output
swing voltage
Common-mode input signal
rejection ratio
Power supply voltage
rejection ratio
Symbol
IDD
VIO
VIO
Ta
Conditions
Min.
Typ.
Max.
Unit
Test
Circuit
4
23
5
3
40
9
4
A
A
mV
5
5
1
10
V/°C
1
S-89230 Series
S-89240 Series
Ta = 40°C to 85°C
IIO
IBIAS
1
1
pA
pA
VCMR
0
4.3
V
2
4.9
0.01
V
V
3
4
VOH
VOL
RL = 1.0 M
RL = 1.0 M
CMRR
60
70
dB
2
PSRR
60
70
dB
1
120
25
5
3.5
A
A
mA
mA
6
6
7
7
Source current
ISOURCE VOUT = 0 V
Sink current
ISINK
VOUT = 0.5 V
S-89230 Series
S-89240 Series
S-89230 Series
S-89240 Series
Table 7
AC Electrical Characteristics (VDD = 5.0 V)
Parameter
Symbol
Rise propagation
delay time
tPLH
Fall propagation
delay time
tPHL
Rise response time
tTLH
Fall response time
tTHL
6
Conditions
S-89230 Series
S-89240 Series
S-89230 Series
Overdrive = 100 mV
S-89240 Series
CL = 15 pF
S-89230 Series
(Refer to Figure 12)
S-89240 Series
S-89230 Series
S-89240 Series
(Ta = 25°C unless otherwise specified)
Min.
Typ.
26
100
5
22
3
15
3
15
Max.
Unit
s
s
s
s
s
s
s
s
MINI ANALOG SERIES
Rev.3.0_02
2.
CMOS COMPARATOR
S-89230/89240 Series
VDD = 3.0 V
Table 8
(Ta = 25°C unless otherwise specified)
DC Electrical Characteristics (VDD = 3.0 V)
Parameter
Current consumption
(per circuit)
Input offset voltage drift
Input offset voltage
Input offset current
Input bias current
Common-mode input voltage
range
Maximum output
swing voltage
Common-mode input signal
rejection ratio
Power supply voltage
rejection ratio
Symbol
IDD
VIO
VIO
Ta
Conditions
Min.
Typ.
Max.
Unit
Test
Circuit
4
23
5
3
40
9
4
A
A
mV
5
5
1
10
V/°C
1
S-89230 Series
S-89240 Series
Ta = 40°C to 85°C
IIO
IBIAS
1
1
pA
pA
VCMR
0
2.3
V
2
2.9
0.01
V
V
3
4
VOH
VOL
RL = 1.0 M
RL = 1.0 M
CMRR
60
70
dB
2
PSRR
60
70
dB
1
120
25
5
3.5
A
A
mA
mA
6
6
7
7
Source current
ISOURCE VOUT = 0 V
Sink current
ISINK
VOUT = 0.5 V
S-89230 Series
S-89240 Series
S-89230 Series
S-89240 Series
Table 9
AC Electrical Characteristics (VDD = 3.0 V)
Parameter
Symbol
Rise propagation
delay time
tPLH
Fall propagation
delay time
tPHL
Rise response time
tTLH
Fall response time
tTHL
Conditions
S-89230 Series
S-89240 Series
S-89230 Series
Overdrive = 100 mV
S-89240 Series
CL = 15 pF
S-89230 Series
(Refer to Figure 12)
S-89240 Series
S-89230 Series
S-89240 Series
(Ta = 25°C unless otherwise specified)
Min.
Typ.
26
100
4
18
2
10
2
10
Max.
Unit
s
s
s
s
s
s
s
s
7
MINI ANALOG SERIES
S-89230/89240 Series
3.
CMOS COMPARATOR
Rev.3.0_02
VDD = 1.8 V
Table 10
(Ta = 25°C unless otherwise specified)
DC Electrical Characteristics (VDD = 1.8 V)
Parameter
Current consumption
(per circuit)
Input offset voltage drift
Input offset voltage
Input offset current
Input bias current
Common-mode input voltage
range
Maximum output
swing voltage
Common-mode input signal
rejection ratio
Power supply voltage
rejection ratio
Symbol
IDD
VIO
VIO
Ta
Conditions
Min.
Typ.
Max.
Unit
Test
Circuit
4
23
5
3
40
9
4
A
A
mV
5
5
1
10
V/°C
1
S-89230 Series
S-89240 Series
Ta = 40°C to 85°C
IIO
IBIAS
1
1
pA
pA
VCMR
0
1.1
V
2
1.7
0.01
V
V
3
4
VOH
VOL
RL = 1.0 M
RL = 1.0 M
CMRR
60
70
dB
2
PSRR
60
70
dB
1
100
20
5
3.5
A
A
mA
mA
6
6
7
7
Source current
ISOURCE VOUT = 0 V
Sink current
ISINK
VOUT = 0.5 V
S-89230 Series
S-89240 Series
S-89230 Series
S-89240 Series
Table 11
AC Electrical Characteristics (VDD = 1.8 V)
Parameter
Symbol
Rise propagation
delay time
tPLH
Fall propagation
delay time
tPHL
Rise response time
tTLH
Fall response time
tTHL
8
Conditions
S-89230 Series
S-89240 Series
S-89230 Series
Overdrive = 100 mV
S-89240 Series
CL = 15 pF
S-89230 Series
(Refer to Figure 12)
S-89240 Series
S-89230 Series
S-89240 Series
(Ta = 25°C unless otherwise specified)
Min.
Typ.
18
87
3.5
15
1.2
6
1.2
6
Max.
Unit
s
s
s
s
s
s
s
s
MINI ANALOG SERIES
Rev.3.0_02
CMOS COMPARATOR
S-89230/89240 Series
Test Circuit (Per Circuit)
1.
Power supply voltage rejection ratio, input offset voltage
Power supply voltage rejection ratio (PSRR)
Input offset voltage (VIO)
VDD
VOUT
VIN
The input offset voltage (VIO) is defined as VIN − VDD / 2 when
VOUT is changed by changing VIN to VDD / 2 level. The power
supply voltage rejection ratio (PSRR) can be calculated by
following expression, with the value of VIO measured at each
VDD.
Measurement conditions:
When VDD = 1.8 V: VDD = VDD1, VIO = VIO1
When VDD = 5.0 V: VDD = VDD2, VIO = VIO2
VDD / 2
PSRR = 20 log
VDD1 VDD2
VIO1 VIO2
Figure 5
2.
Common-mode input signal rejection ratio, common-mode input voltage range
Common-mode input signal rejection ratio (CMRR)
The common-mode input signal rejection ratio (CMRR) can
be calculated by the following expression, with the offset
voltage (VIO) set as VIN1 − VIN2 after VOUT is changed by
changing VIN1.
VDD
VIN1
VIN2
Figure 6
VOUT
Measurement conditions:
When VIN2 = VCMR Max.: VIN2 = VINH, VIO = VIO1
When VIN2 = VDD/2: VIN2 = VINL, VIO = VIO2
CMRR = 20 log
VINH VINL
VIO1 VIO2
Common-mode input voltage range (VCMR)
Varying VIN2, the range of VIN2 that satisfies the
common-mode input signal rejection ratio (CMRR) is the
common-mode input voltage range (VCMR).
9
MINI ANALOG SERIES
S-89230/89240 Series
3.
CMOS COMPARATOR
Rev.3.0_02
Maximum output swing voltage (VOH)
VDD
Maximum output swing voltage (VOH)
Test conditions:
VDD
0.1 V
2
VDD
VIN2 =
0.1 V
2
VIN1 =
VOH
RL = 1 M
RL
VIN1
VIN2
Figure 7
4.
Maximum output swing voltage (VOL)
VDD
Maximum output swing voltage (VOL)
Test conditions:
RL
VIN1
VIN2
Figure 8
10
VDD
0.1 V
2
VDD
VIN2 =
0.1 V
2
VIN1 =
VOL
RL = 1 M
MINI ANALOG SERIES
Rev.3.0_02
5.
CMOS COMPARATOR
S-89230/89240 Series
Current consumption
VDD
Current consumption (IDD)
Test conditions:
VIN = VSS
VIN = VCMR Max.
A
VOUT
VIN1
VIN2
Figure 9
6.
Source current
Source current (ISOURCE)
VDD
Test conditions:
VOUT = 0 V
VDD
0.5 V
2
VDD
VIN2 =
0.5 V
2
VIN1 =
VIN1
A
VOUT
VIN2
Figure 10
7.
Sink current
VDD
VOUT
Sink current (ISINK)
Test conditions:
VOUT = 0.5 V
A
VIN1
VDD
0.5 V
2
VDD
VIN2 =
0.5 V
2
VIN1 =
VIN2
Figure 11
11
MINI ANALOG SERIES
S-89230/89240 Series
8.
CMOS COMPARATOR
Rev.3.0_02
Propagation time, response time
tR = tF = 20 ns
VCMR Max.
tPHL
100 mV Overdrive
VIN () = VDD / 2
VIN ()
100 mV Overdrive
VSS
( = 0 V)
tPLH
tTHL
VOUT
VDD 0.9
VDD / 2
VDD 0.1
tTLH
Figure 12
12
MINI ANALOG SERIES
Rev.3.0_02
CMOS COMPARATOR
S-89230/89240 Series
Precautions
Do not apply an electrostatic discharge to this IC that exceeds performance ratings of the built-in electrostatic
protection circuit.
ABLIC Inc. claims no responsibility for any disputes arising out of or in connection with any infringement by
products including this IC of patents owned by a third party.
13
MINI ANALOG SERIES
S-89230/89240 Series
CMOS COMPARATOR
Rev.3.0_02
Characteristics (Typical Data)
1.
Current consumption (per circuit, IDD) vs. Power supply voltage (VDD)
(1) S-89230 Series
(2) S-89240 Series
IDDVDD, VSS = 0 V
6
20
5
15
Ta = −40°C
25°C
85°C
IDD [μA]
IDD [μA]
IDDVDD, VSS = 0 V
25
10
5
4
3
25°C
2
1
0
0
0
1
2
3
4
5
0
6
1
2
VDD [V]
2.
85°C
Ta = −40°C
3
VDD [V]
4
5
6
Output current characteristics
Source current (ISOURCE) vs. Power supply voltage (VDD)
2. 1
(1) S-89230 Series
(2) S-89240 Series
ISOURCEVDD, VOUT = 0 V, VSS = 0 V
400
80
300
60
200
Ta = −40°C
25°C
ISOURCE [μA]
ISOURCE [μA]
ISOURCEVDD, VOUT = 0 V, VSS = 0 V
85°C
100
0
Ta = −40°C
40
25°C
85°C
20
0
0
1
2
3
4
5
0
6
1
2
VDD [V]
3
VDD [V]
4
5
6
2. 2 Sink current (ISINK) vs. Power supply voltage (VDD)
(1) S-89230 Series
(2) S-89240 Series
ISINKVDD, VOUT = 0.5 V, VSS = 0 V
ISINKVDD, VOUT = 0.5 V, VSS = 0 V
15.0
15.0
Ta = −40°C
10.0
12.5
25°C
ISINK [mA]
ISINK [mA]
12.5
7.5
5.0
85°C
2.5
5.0
85°C
0
0
1
2
3
VDD [V]
4
5
6
25°C
Ta = −40°C
7.5
2.5
0
14
10.0
0
1
2
3
VDD [V]
4
5
6
MINI ANALOG SERIES
Rev.3.0_02
CMOS COMPARATOR
S-89230/89240 Series
Output voltage (VOUT) vs. Source current (ISOURCE)
2. 3
(1) S-89230 Series
VOUTISOURCE, VDD = 1.8 V, VSS = 0 V
VOUTISOURCE, VDD = 3.0 V, VSS = 0 V
2.0
3.0
25°C
VOUT [V]
VOUT [V]
1.5
85°C
1.0
25°C
2.5
0.5
85°C
2.0
1.5
1.0
0.5
Ta = −40°C
0
Ta = −40°C
0
0
50
100
150
200
ISOURCE [μA]
250
300
0
350
50
100
150
200
ISOURCE [μA]
250
300
350
VOUTISOURCE, VDD = 5.0 V, VSS = 0 V
5.0
25°C
VOUT [V]
4.0
85°C
3.0
2.0
1.0
Ta = −40°C
0
0
50
100
150 200
ISOURCE [μA]
250
300
350
85°C
1.0
VOUTISOURCE, VDD = 3.0 V, VSS = 0 V
3.0
0.5
25°C
2.5
VOUT [V]
VOUT [V]
(2) S-89240 Series
VOUTISOURCE, VDD = 1.8 V, VSS = 0 V
2.0
25°C
1.5
2.0
85°C
1.5
1.0
0.5
Ta = −40°C
0
Ta = −40°C
0
0
10
20
30
40
ISOURCE [μA]
50
60
70
0
10
20
30
40
ISOURCE [μA]
50
60
70
VOUTISOURCE, VDD = 5.0 V, VSS = 0 V
5.0
VOUT [V]
4.0
25°C
3.0
2.0
85°C
1.0
Ta = −40°C
0
0
10
20
30
40
ISOURCE [μA]
50
60
70
15
MINI ANALOG SERIES
S-89230/89240 Series
CMOS COMPARATOR
Rev.3.0_02
Output voltage (VOUT) vs. Sink current (ISINK)
2. 4
(1) S-89230 Series
VOUTISINK, VDD = 1.8 V, VSS = 0 V
VOUTISINK, VDD = 3.0 V, VSS = 0 V
2.0
3.0
25°C
25°C
2.5
85°C
VOUT [V]
VOUT [V]
1.5
1.0
0.5
2.0
85°C
1.5
1.0
Ta = −40°C
0.5
Ta = −40°C
0
0
0
5
10
15
20
ISINK [mA]
25
0
30
5
10
15
20
ISINK [mA]
25
30
VOUTISINK, VDD = 5.0 V, VSS = 0 V
5.0
25°C
VOUT [V]
4.0
3.0
85°C
2.0
1.0
Ta = −40°C
0
0
5
10
15
20
ISINK [mA]
25
30
(2) S-89240 Series
VOUTISINK, VDD = 1.8 V, VSS = 0 V
VOUTISINK, VDD = 3.0 V, VSS = 0 V
2.0
3.0
25°C
85°C
1.0
0.5
0
85°C
1.5
1.0
Ta = −40°C
0
0
5
10
15
20
ISINK [mA]
25
30
VOUTISINK, VDD = 5.0 V, VSS = 0 V
5.0
25°C
4.0
VOUT [V]
2.0
0.5
Ta = −40°C
3.0
85°C
2.0
1.0
Ta = −40°C
0
0
16
25°C
2.5
VOUT [V]
VOUT [V]
1.5
5
10
15
20
ISINK [mA]
25
30
0
5
10
15
20
ISINK [mA]
25
30
1.97±0.03
8
7
6
5
3
4
+0.05
1
0.5
2
0.08 -0.02
0.48±0.02
0.2±0.05
No. PH008-A-P-SD-2.1
TITLE
SNT-8A-A-PKG Dimensions
No.
PH008-A-P-SD-2.1
ANGLE
UNIT
mm
ABLIC Inc.
+0.1
ø1.5 -0
2.25±0.05
4.0±0.1
2.0±0.05
ø0.5±0.1
0.25±0.05
0.65±0.05
4.0±0.1
4 321
5 6 78
Feed direction
No. PH008-A-C-SD-2.0
TITLE
SNT-8A-A-Carrier Tape
No.
PH008-A-C-SD-2.0
ANGLE
UNIT
mm
ABLIC Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. PH008-A-R-SD-1.0
TITLE
SNT-8A-A-Reel
No.
PH008-A-R-SD-1.0
QTY.
ANGLE
UNIT
mm
ABLIC Inc.
5,000
0.52
2.01
2
0.52
0.2 0.3
1.
2.
1
(0.25 mm min. / 0.30 mm typ.)
(1.96 mm ~ 2.06 mm)
1.
2.
3.
4.
0.03 mm
SNT
1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.).
2. Do not widen the land pattern to the center of the package (1.96 mm to 2.06mm).
Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package.
2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm
or less from the land pattern surface.
3. Match the mask aperture size and aperture position with the land pattern.
4. Refer to "SNT Package User's Guide" for details.
1.
2.
(0.25 mm min. / 0.30 mm typ.)
(1.96 mm ~ 2.06 mm)
TITLE
No. PH008-A-L-SD-4.1
SNT-8A-A
-Land Recommendation
PH008-A-L-SD-4.1
No.
ANGLE
UNIT
mm
ABLIC Inc.
2.90±0.2
8
5
1
4
0.13±0.1
0.2±0.1
0.65±0.1
No. FM008-A-P-SD-1.2
TITLE
TMSOP8-A-PKG Dimensions
No.
FM008-A-P-SD-1.2
ANGLE
UNIT
mm
ABLIC Inc.
2.00±0.05
4.00±0.1
4.00±0.1
1.00±0.1
+0.1
1.5 -0
1.05±0.05
0.30±0.05
3.25±0.05
4
1
5
8
Feed direction
No. FM008-A-C-SD-2.0
TITLE
TMSOP8-A-Carrier Tape
FM008-A-C-SD-2.0
No.
ANGLE
UNIT
mm
ABLIC Inc.
16.5max.
13.0±0.3
Enlarged drawing in the central part
13±0.2
(60°)
(60°)
No. FM008-A-R-SD-1.0
TITLE
TMSOP8-A-Reel
No.
FM008-A-R-SD-1.0
QTY.
ANGLE
UNIT
mm
ABLIC Inc.
4,000
Disclaimers (Handling Precautions)
1.
All the information described herein (product data, specifications, figures, tables, programs, algorithms and
application circuit examples, etc.) is current as of publishing date of this document and is subject to change without
notice.
2.
The circuit examples and the usages described herein are for reference only, and do not guarantee the success of
any specific mass-production design.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the reasons other than the products
described herein (hereinafter "the products") or infringement of third-party intellectual property right and any other
right due to the use of the information described herein.
3.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the incorrect information described
herein.
4.
Be careful to use the products within their ranges described herein. Pay special attention for use to the absolute
maximum ratings, operation voltage range and electrical characteristics, etc.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by failures and / or accidents, etc. due to
the use of the products outside their specified ranges.
5.
Before using the products, confirm their applications, and the laws and regulations of the region or country where they
are used and verify suitability, safety and other factors for the intended use.
6.
When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related
laws, and follow the required procedures.
7.
The products are strictly prohibited from using, providing or exporting for the purposes of the development of
weapons of mass destruction or military use. ABLIC Inc. is not liable for any losses, damages, claims or demands
caused by any provision or export to the person or entity who intends to develop, manufacture, use or store nuclear,
biological or chemical weapons or missiles, or use any other military purposes.
8.
The products are not designed to be used as part of any device or equipment that may affect the human body, human
life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control
systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment,
aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses by
ABLIC, Inc. Do not apply the products to the above listed devices and equipments.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by unauthorized or unspecified use of
the products.
9.
In general, semiconductor products may fail or malfunction with some probability. The user of the products should
therefore take responsibility to give thorough consideration to safety design including redundancy, fire spread
prevention measures, and malfunction prevention to prevent accidents causing injury or death, fires and social
damage, etc. that may ensue from the products' failure or malfunction.
The entire system in which the products are used must be sufficiently evaluated and judged whether the products are
allowed to apply for the system on customer's own responsibility.
10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the
product design by the customer depending on the intended use.
11. The products do not affect human health under normal use. However, they contain chemical substances and heavy
metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be
careful when handling these with the bare hands to prevent injuries, etc.
12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used.
13. The information described herein contains copyright information and know-how of ABLIC Inc. The information
described herein does not convey any license under any intellectual property rights or any other rights belonging to
ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any part of this
document described herein for the purpose of disclosing it to a third-party is strictly prohibited without the express
permission of ABLIC Inc.
14. For more details on the information described herein or any other questions, please contact ABLIC Inc.'s sales
representative.
15. This Disclaimers have been delivered in a text using the Japanese language, which text, despite any translations into
the English language and the Chinese language, shall be controlling.
2.4-2019.07
www.ablic.com
工商网监
湘ICP备2023018690号
