0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
S-89431ACNC-HBVTFG

S-89431ACNC-HBVTFG

  • 厂商:

    SII(精工半导体)

  • 封装:

    SC70-5

  • 描述:

    IC OPAMP GP 4.8KHZ RRO SC88A

  • 数据手册
  • 价格&库存
S-89431ACNC-HBVTFG 数据手册
S-89430/89431 Series www.ablic.com www.ablicinc.com MINI ANALOG SERIES 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER © ABLIC Inc., 2009-2015 Rev.2.1_02 The mini-analog series is a group of ICs that incorporate a general purpose analog circuit in a small package. *1 The S-89430/89431 Series is a CMOS type operational amplifier that feature Rail-to-Rail I/O and an internal phase compensation circuit, and operates at a lower voltage with lower current consumption. These features make this product the ideal solution for small battery-powered portable equipment. These features enable driving at a lower voltage (from 0.9 V) and with lower current consumption (0.5 A). The S-89430A/89431A Series is a single operational amplifier (one circuit). The S-89430B/89431B Series is a dual operational amplifier (two circuits). *1. Rail-to-Rail is a trademark of Motorola, Inc.  Features  Lower operating voltage than the conventional general-purpose: VDD = 0.9 V to 5.5 V  Low current consumption (per circuit): IDD = 0.5 A Typ.  Wide I/O voltage range (Rail-to-Rail): VCMR = VSS to VDD  Low input offset voltage: VIO = 10.0 mV Max. (S-89430 Series) VIO = 5.0 mV Max. (S-89431 Series)  No external capacitors required for internal phase compensation  Lead-free, Sn 100%, halogen-free*1 *1. Refer to “ Product Name Structure” for details.  Applications     Mobile phone Notebook PC Digital camera Digital video camera  Packages     SC-88A SOT-23-5 SNT-8A TMSOP-8 1 MINI ANALOG SERIES 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER Rev.2.1_02 S-89430/89431 Series  Block Diagrams 1. S-89430A/89431A Series single operational amplifier (one circuit) VDD IN() + OUT IN() - VSS Figure 1 2. S-89430B/89431B Series dual operational amplifier (two circuits) VDD IN1() + IN1() - OUT1 IN2() + IN2() - OUT2 VSS Figure 2 2 MINI ANALOG SERIES Rev.2.1_02 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER S-89430/89431 Series  Product Name Structure Users can select the product type for the S-89430/89431 Series. Refer to “1. Product name” regarding the contents of product name, “2. Packages” regarding the package drawings and “3. Product name list” regarding the product type. 1. Product name (1) SC-88A S-8943 x A C NC - xxx TF x Environmental code S: Lead-free, halogen-free G: Lead-free (for details, please contact our sales office) IC direction in tape specifications*1 Product code (abbreviation)*2 Package name (abbreviation) NC: SC-88A Number of circuits A: 1 Input offset voltage 0: VIO = 10.0 mV Max. 1: VIO = 5.0 mV Max. *1. *2. Refer to the tape drawing. Refer to “3. Product name list”. 3 MINI ANALOG SERIES 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER Rev.2.1_02 S-89430/89431 Series (2) SOT-23-5 S-8943 x A C MC - xxx T2 x Environmental code U: Lead-free (Sn 100%), halogen-free G: Lead-free (for details, please contact our sales office) IC direction in tape specifications*1 Product code (abbreviation)*2 Package name (abbreviation) MC: SOT-23-5 Number of circuits A: 1 Input offset voltage 0: VIO = 10.0 mV Max. 1: VIO = 5.0 mV Max. *1. *2. Refer to the tape drawing. Refer to “3. Product name list”. (3) SNT-8A, TMSOP-8 S-8943 x B C xx - xxx TF U Environmental code U: Lead-free (Sn 100%), halogen-free IC direction in tape specifications*1 Product code (abbreviation)*2 Package name (abbreviation) PH: SNT-8A FM: TMSOP-8 Number of circuits B: 2 Input offset voltage 0: VIO = 10.0 mV Max. 1: VIO = 5.0 mV Max. *1. *2. 4 Refer to the tape drawing. Refer to “3. Product name list”. MINI ANALOG SERIES Rev.2.1_02 2. Packages Package Name SC-88A SOT-23-5 SNT-8A TMSOP-8 3. 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER S-89430/89431 Series Package NP005-B-P-SD MP005-A-P-SD PH008-A-P-SD FM008-A-P-SD Drawing Code Tape Reel NP005-B-C-SD NP005-B-R-SD MP005-A-C-SD MP005-A-R-SD PH008-A-C-SD PH008-A-R-SD FM008-A-C-SD FM008-A-R-SD Land   PH008-A-L-SD  Product name list Table 1 Input offset voltage Number of circuits S-89430ACNC-HBUTFz S-89430ACMC-HBUT2x Product name 10 mV Max. 10 mV Max. 1 1 SC-88A SOT-23-5 Package S-89430BCPH-H4CTFU S-89430BCFM-H4CTFU S-89431ACNC-HBVTFz S-89431ACMC-HBVT2x S-89431BCPH-H4DTFU S-89431BCFM-H4DTFU 10 mV Max. 10 mV Max. 5 mV Max. 5 mV Max. 5 mV Max. 5 mV Max. 2 2 1 1 2 2 SNT-8A TMSOP-8 SC-88A SOT-23-5 SNT-8A TMSOP-8 Remark 1. x: G or U 2. z: G or S 3. Please select products of environmental code = U for Sn 100%, halogen-free products. 5 MINI ANALOG SERIES 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER Rev.2.1_02 S-89430/89431 Series  Pin Configurations 1. SC-88A Top view 5 Table 2 4 1 2 3 Figure 3 2. Pin No. Symbol 1 2 3 4 5 IN() VSS IN() OUT VDD (Product with 1 circuit) Description Non-inverted input pin GND pin Inverted input pin Output pin Positive power supply pin SOT-23-5 Top view 5 Table 3 4 1 2 3 Pin No. Symbol 1 2 3 4 5 IN() VSS IN() OUT VDD (Product with 1 circuit) Description Non-inverted input pin GND pin Inverted input pin Output pin Positive power supply pin Figure 4 3. SNT-8A Top view 1 2 3 4 Table 4 8 7 6 5 Pin No. 1 2 3 4 5 6 7 8 Figure 5 Symbol OUT1 IN1() IN1() VSS IN2() IN2() OUT2 VDD (Product with 2 circuits) Description Output pin 1 Inverted input pin 1 Non-inverted input pin 1 GND pin Non-inverted input pin 2 Inverted input pin 2 Output pin 2 Positive power supply pin 4. TMSOP-8 Top view 1 2 3 4 8 7 6 5 Figure 6 6 Table 5 Pin No. 1 2 3 4 5 6 7 8 Symbol OUT1 IN1() IN1() VSS IN2() IN2() OUT2 VDD (Product with 2 circuits) Description Output pin 1 Inverted input pin 1 Non-inverted input pin 1 GND pin Non-inverted input pin 2 Inverted input pin 2 Output pin 2 Positive power supply pin MINI ANALOG SERIES Rev.2.1_02 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER S-89430/89431 Series  Absolute Maximum Ratings Table 6 Parameter Power supply voltage Input voltage Output voltage Differential input voltage Output pin current SC-88A SOT-23-5 Power dissipation SNT-8A TMSOP-8 Operating ambient temperature Storage temperature PD Topr Tstg When mounted on board [Mounted board] (1) Board size: 114.3 mm  76.2 mm  t1.6 mm (2) Board name: JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. 700 Power Dissipation (PD) [mW] *1. (Ta = 25°C unless otherwise specified) Absolute Maximum Rating Unit VSS  0.3 to VSS  7.0 V VSS  0.3 to VSS  7.0 (7.0 Max.) V VSS  0.3 to VDD  0.3 (7.0 Max.) V 5.5 V 7.0 mA 7.0 mA 350*1 mW 600*1 mW 450*1 mW 650*1 mW 40 to 85 °C 55 to 125 °C Symbol VDD VIN VOUT VIND ISOURCE ISINK 600 TMSOP-8 500 SOT-23-5 400 SNT-8A 300 200 SC-88A 100 0 0 50 100 150 Ambient Temperature (Ta) [C] Figure 7 Power Dissipation of Package (When Mounted on Board) 7 MINI ANALOG SERIES 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER Rev.2.1_02 S-89430/89431 Series  Electrical Characteristics Table 7 Parameter Range of operating power supply voltage 1. Symbol Conditions  VDD (Ta = 25°C unless otherwise specified) Test Min. Typ. Max. Unit Circuit 0.9  5.5 V  VDD = 3.0 V Table 8 (Ta = 25°C unless otherwise specified) DC Electrical Characteristics (VDD = 3.0 V) Parameter Symbol Conditions Current consumption *1 (per circuit) IDD VCMR = VOUT = 1.5 V Input offset voltage VIO VCMR = 1.5 V S-89430 Series S-89431 Series   Input offset current IIO Input bias current IBIAS Common-mode input voltage VCMR range  Min. Typ. Max. Unit Test Circuit  0.50 0.75 A 6 10 5   5 3 1 1 10 5   mV mV pA pA 2 2   0  3 V 3 70 80  dB 9 2.95     0.05 V V 4 5 Voltage gain (open loop) AVOL Maximum output swing voltage Common-mode input signal rejection ratio Power supply voltage rejection ratio VOH VOL VSS  0.1 V  VOUT  VDD  0.1 V, VCMR = 1.5 V, RL = 1.0 M RL = 100 k RL = 100 k CMRR VSS  VCMR  VDD 45 65  dB 3 PSRR VDD = 0.9 V to 5.5 V 70 80  dB 1 Source current ISOURCE Sink current ISINK VOUT = VDD  0.1 V VOUT = 0 V VOUT = 0.1 V VOUT = VDD 400 4800 400 4800 500 6000 550 6000     A A A A 7 7 8 8 *1. When the output is saturated on the VDD side, a current consumption of up to 3 A to 5 A may flow. Refer to “4. Current consumption (per circuit) vs. Common-mode input voltage range characteristics (voltage follower configuration)” in “ Characteristics (Typical Data)”. Table 9 AC Electrical Characteristics (VDD = 3.0 V) Parameter Slew rate Gain-bandwidth product Maximum load capacitance 8 (Ta = 25°C unless otherwise specified) Symbol Conditions RL = 1.0 M, CL = 15 pF (Refer to Figure 17) SR GBP CL = 0 pF CL  Min.    Typ. 5 4.8 47 Max.    Unit V/ms kHz pF MINI ANALOG SERIES Rev.2.1_02 2. 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER S-89430/89431 Series VDD = 1.8 V Table 10 (Ta = 25°C unless otherwise specified) DC Electrical Characteristics (VDD = 1.8 V) Parameter Min. Typ. Max. Unit Test Circuit  0.50 0.75 A 6 10 5   5 3 1 1 10 5   mV mV pA pA 2 2   0  1.8 V 3 66 75  dB 9 1.75  35 45   55 60  0.05   V V dB dB 4 5 3 3 VDD = 0.9 V to 5.5 V 70 80  dB 1 VOUT = VDD  0.1 V VOUT = 0 V VOUT = 0.1 V VOUT = VDD 220 1200 220 1200 300 1800 300 1800     A A A A 7 7 8 8 Symbol Conditions Current consumption *1 (per circuit) IDD VCMR = VOUT = 0.9 V Input offset voltage VIO VCMR = 0.9 V Input offset current IIO Input bias current IBIAS Common-mode input voltage VCMR range Voltage gain (open loop) AVOL Maximum output swing voltage VOH VOL Common-mode input signal rejection ratio Power supply voltage rejection ratio CMRR PSRR Source current ISOURCE Sink current ISINK *1. S-89430 Series S-89431 Series    VSS  0.1 V  VOUT  VDD  0.1 V, VCMR = 0.9 V, RL = 1.0 M RL = 100 k RL = 100 k VSS  VCMR  VDD VSS  VCMR  VDD  0.3 V When the output is saturated on the VDD side, a current consumption of up to 3 A to 5 A may flow. Refer to “4. Current consumption (per circuit) vs. Common-mode input voltage range characteristics (voltage follower configuration)” in “ Characteristics (Typical Data)”. Table 11 AC Electrical Characteristics (VDD = 1.8 V) Parameter Slew rate Gain-bandwidth product Maximum load capacitance (Ta = 25°C unless otherwise specified) Symbol Conditions RL = 1.0 M, CL = 15 pF (Refer to Figure 17) SR GBP CL = 0 pF CL  Min.    Typ. 4.5 5 47 Max.    Unit V/ms kHz pF 9 MINI ANALOG SERIES 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER Rev.2.1_02 S-89430/89431 Series 3. VDD = 0.9 V Table 12 (Ta = 25°C unless otherwise specified) DC Electrical Characteristics (VDD = 0.9 V) Parameter Min. Typ. Max. Unit Test Circuit  0.50 0.75 A 6 10 5   5 3 1 1 10 5   mV mV pA pA 2 2   0  0.9 V 3 60 75  dB 9 0.85  25 40   55 60  0.05   V V dB dB 4 5 3 3 VDD = 0.9 V to 5.5 V 70 80  dB 1 VOUT = VDD  0.1 V VOUT = 0 V VOUT = 0.1 V VOUT = VDD 25 40 10 12 65 140 65 120     A A A A 7 7 8 8 Symbol Conditions Current consumption *1 (per circuit) IDD VCMR = VOUT = 0.45 V Input offset voltage VIO VCMR = 0.45 V Input offset current IIO Input bias current IBIAS Common-mode input voltage VCMR range Voltage gain (open loop) AVOL Maximum output swing voltage VOH VOL Common-mode input signal rejection ratio Power supply voltage rejection ratio CMRR PSRR Source current ISOURCE Sink current ISINK *1. S-89430 Series S-89431 Series    VSS  0.1 V  VOUT  VDD  0.1 V, VCMR = 0.45 V, RL = 1.0 M RL = 100 k RL = 100 k VSS  VCMR  VDD VSS  VCMR  VDD  0.35 V When the output is saturated on the VDD side, a current consumption of up to 3 A to 5 A may flow. Refer to “4. Current consumption (per circuit) vs. Common-mode input voltage range characteristics (voltage follower configuration)” in “ Characteristics (Typical Data)”. Table 13 AC Electrical Characteristics (VDD = 0.9 V) Parameter Slew rate Gain-bandwidth product Maximum load capacitance 10 (Ta = 25°C unless otherwise specified) Symbol Conditions RL = 1.0 M, CL = 15 pF (Refer to Figure 17) SR GBP CL = 0 pF CL  Min.    Typ. 4 5 47 Max.    Unit V/ms kHz pF MINI ANALOG SERIES Rev.2.1_02 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER S-89430/89431 Series  Test Circuit (Per Circuit) 1. Power supply voltage rejection ratio  Power supply voltage rejection ratio (PSRR) The power supply voltage rejection ratio (PSRR) can be calculated by the following expression, with VOUT measured at each VDD. VDD RF RS  VOUT  Test conditions: When VDD = 0.9 V: VDD = VDD1, VOUT = VOUT1, When VDD = 5.5 V: VDD = VDD2, VOUT = VOUT2 RS RF PSRR = 20 log    RFRS VDD1  VDD2  R  VOUT1  VOUT2 S  0.45 V Figure 8 2. Input offset voltage  Input offset voltage (VIO) VDD   RS VIO = VOUT  2  RFRS  VDD RF RS   VOUT RS RF VCMR = VDD / 2 Figure 9 11 MINI ANALOG SERIES 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER Rev.2.1_02 S-89430/89431 Series 3. Common-mode input signal rejection ratio, common-mode input voltage range  Common-mode input signal rejection ratio (CMRR) The common-mode input signal rejection ratio (CMRR) can be calculated by the following expression, with VOUT measured at each VIN. VDD RF RS  VOUT  RS RF VIN CMRR = 20 log VDD / 2    RFRS VIN1  VIN2  RS  VOUT1  VOUT2   Common-mode input voltage range (VCMR) The common-mode input voltage range is the range of VIN in which VOUT satisfies the common-mode input signal rejection ratio specifications. Figure 10 4. Test conditions: When VIN = VCMR Max.: VIN = VIN1, VOUT = VOUT1, When VIN = VCMR Min.: VIN = VIN2, VOUT = VOUT2 Maximum output swing voltage (VOH)  Maximum output swing voltage (VOH) VDD  VOH  Test conditions: VDD VIN1 = 2  0.1 V VDD VIN2 = 2  0.1 V RL = 100 k RL VIN1 VDD / 2 VIN2 Figure 11 5. Maximum output swing voltage (VOL) VDD  Maximum output swing voltage (VOL) VDD / 2 RL   VIN1 VIN2 Figure 12 12 VOL Test conditions: VDD VIN1 = 2  0.1 V VDD VIN2 = 2  0.1 V RL = 100 k MINI ANALOG SERIES Rev.2.1_02 6. 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER S-89430/89431 Series Current consumption  Current consumption (IDD) VDD A   VCMR = VDD / 2 Figure 13 7. Source current VDD VOUT A   VIN1  Source current (ISOURCE) Test conditions: VOUT = VDD  0.1 V or VOUT = 0 V VDD VIN1 = 2  0.1 V VDD VIN2 = 2  0.1 V VIN2 Figure 14 8. Sink current  Sink current (ISINK) VDD Test conditions: VOUT = 0.1 V or VOUT = VDD VDD VIN1 = 2  0.1 V VDD VIN2 = 2  0.1 V   VIN1 VIN2 A VOUT Figure 15 13 MINI ANALOG SERIES 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER Rev.2.1_02 S-89430/89431 Series 9. Voltage gain (open loop) VDD RS RF  D.U.T   NULL  RS RF VDDN RL VCMR = VDD / 2 VOUT VSSN VM VDD / 2 Figure 16  Voltage gain (open loop) (AVOL) The voltage gain (AVOL) can be calculated by the following expression, with VOUT measured at each VM. Test conditions: When VM = VDD  0.1 V: VM = VM1, VOUT = VOUT1, When VM = VSS  0.1 V: VM = VM2, VOUT = VOUT2 RL = 1 M  AVOL = 20 log 10.    RFRS VM1  VM2  RS  VOUT1  VOUT2  Slew rate (SR) Measured by the voltage follower circuit. tR = tF = 1 s (VSS to VDD) VDD VIN() VSS (= 0 V) At fall tTHL SR = VDD  0.9 VOUT (= VIN(-)) tTLH Figure 17 14 VDD  0.1 VDD  0.8 tTHL At rise VDD  0.8 SR = tTLH MINI ANALOG SERIES Rev.2.1_02 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER S-89430/89431 Series  Precautions  When the output is saturated on the VDD side, a current consumption of up to 3 A to 5 A may flow. Refer to “4. Current consumption (per circuit) vs. Common-mode input voltage range characteristics (voltage follower configuration)” in “ Characteristics (Typical Data)”.  Do not apply an electrostatic discharge to this IC that exceeds performance ratings of the built-in electrostatic protection circuit.  Use this IC with the output current 7 mA or less.  ABLIC Inc. claims no responsibility for any disputes arising out of or in connection with any infringement by products including this IC of patents owned by a third party. 15 MINI ANALOG SERIES 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER Rev.2.1_02 S-89430/89431 Series  Characteristics (Typical Data) 1. Current consumption (per circuit) vs. Power supply voltage IDDVDD, VSS = 0 V, VCMR = VOUT = VDD 2 1.0 IDD [μA] 0.8 85°C 25°C 0.6 0.4 Ta = −40°C 0.2 0.0 0 2. 1 2 3 VDD [V] 4 5 6 Voltage gain vs. Frequency AVOLf, VDD = 3.0 V, VSS = 0 V 100 Ta = −40°C 25°C 60 85°C 20 0 0.01 0.1 1 10 f [Hz] 100 1000 10000 AVOLf, VDD = 0.9 V, VSS = 0 V Ta = −40°C AVOL [dB] 80 60 85°C 25°C 20 0 0.01 16 60 40 25°C 85°C 20 100 40 Ta = −40°C 80 AVOL [dB] AVOL [dB] 80 40 AVOLf, VDD = 1.8 V, VSS = 0 V 100 0.1 1 10 f [Hz] 100 1000 10000 0 0.01 0.1 1 10 f [Hz] 100 1000 10000 MINI ANALOG SERIES Rev.2.1_02 3. 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER S-89430/89431 Series Output current 3. 1 ISOURCE vs. Power supply voltage ISOURCEVDD, VOUT = VDD  0.1 V, VSS = 0 V 1500 ISOURCE [A] Ta = 40°C 1000 25°C 500 85°C 0 0 3. 2 1 2 3 VDD [V] 4 5 6 ISINK vs. Power supply voltage ISINKVDD, VOUT = 0.1 V, VSS = 0 V 1500 ISINK [A] Ta = 40°C 1000 25°C 500 85°C 0 0 1 2 3 VDD [V] 4 5 6 17 MINI ANALOG SERIES 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER Rev.2.1_02 S-89430/89431 Series 3. 3 Output voltage (VOUT) vs. ISOURCE VOUTISOURCE, VDD = 3.0 V, VSS = 0 V VOUTISOURCE, VDD = 1.8 V, VSS = 0 V 3.0 Ta = 40°C 2.0 VOUT [V] VOUT [V] 2.5 85°C 1.5 25°C 1.0 0.5 0.0 0 500 1000 ISOURCE [A] 1500 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 Ta = 40°C 25°C 85°C 0 2000 500 1000 ISOURCE [A] 1500 2000 VOUT [V] VOUTISOURCE, VDD = 0.9 V, VSS = 0 V 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 85°C Ta = 40°C 25°C 0 3. 4 50 100 ISOURCE [A] 150 200 Output voltage (VOUT) vs. ISINK VOUTISINK, VDD = 3.0 V, VSS = 0 V VOUTISINK, VDD = 1.8 V, VSS = 0 V 3.0 2.0 85°C 1.5 25°C 1.0 Ta = 40°C 0.5 0.0 0 500 1000 ISINK [A] 1500 2000 VOUT [V] VOUTISINK, VDD = 0.9 V, VSS = 0 V 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 Ta = 40°C 25°C 0 18 50 100 ISINK [A] 85°C 150 200 VOUT [V] VOUT [V] 2.5 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 85°C 25°C Ta = 40°C 0 500 1000 ISINK [A] 1500 2000 MINI ANALOG SERIES Rev.2.1_02 Current consumption (per circuit) vs. Common-mode input voltage range (voltage follower configuration) IDD [A] 4. 0.5 A Rail-to-Rail CMOS OPERATIONAL AMPLIFIER S-89430/89431 Series IDDVCMR, VDD = 3.0 V, VSS = 0 V 20 18 16 14 12 10 8 6 4 2 0 25°C Ta = 40°C -0.5 0 0.5 1 1.5 2 VCMR [V] 2.5 85°C 3 3.5 19 2.0±0.2 1.3±0.1 5 1 4 2 0.65 3 +0.1 0.15 -0.05 0.65 0.2 +0.1 -0.05 No. NP005-B-P-SD-1.2 TITLE SC88A-B-PKG Dimensions No. NP005-B-P-SD-1.2 ANGLE UNIT mm ABLIC Inc. 4.0±0.1 2.0±0.1 1.1±0.1 ø1.55±0.05 0.2±0.05 0.3 4.0±0.1 ø1.05±0.1 (2.25) 2.05±0.1 3 2 1 4 5 Feed direction No. NP005-B-C-SD-2.0 TITLE SC88A-B-Carrier Tape No. NP005-B-C-SD-2.0 ANGLE UNIT mm ABLIC Inc. 12.5max. 9.0±0.3 Enlarged drawing in the central part ø13±0.2 (60°) (60°) No. NP005-B-R-SD-2.1 TITLE SC88A-B-Reel No. NP005-B-R-SD-2.1 QTY. ANGLE UNIT mm ABLIC Inc. 3,000 2.9±0.2 1.9±0.2 4 5 1 2 +0.1 0.16 -0.06 3 0.95±0.1 0.4±0.1 No. MP005-A-P-SD-1.3 TITLE SOT235-A-PKG Dimensions No. MP005-A-P-SD-1.3 ANGLE UNIT mm ABLIC Inc. 4.0±0.1(10 pitches:40.0±0.2) +0.1 ø1.5 -0 +0.2 ø1.0 -0 2.0±0.05 0.25±0.1 4.0±0.1 1.4±0.2 3.2±0.2 3 2 1 4 5 Feed direction No. MP005-A-C-SD-2.1 TITLE SOT235-A-Carrier Tape No. MP005-A-C-SD-2.1 ANGLE UNIT mm ABLIC Inc. 12.5max. 9.0±0.3 Enlarged drawing in the central part ø13±0.2 (60°) (60°) No. MP005-A-R-SD-1.1 SOT235-A-Reel TITLE No. MP005-A-R-SD-1.1 ANGLE QTY. UNIT mm ABLIC Inc. 3,000 1.97±0.03 8 7 6 5 3 4 +0.05 1 0.5 2 0.08 -0.02 0.48±0.02 0.2±0.05 No. PH008-A-P-SD-2.1 TITLE SNT-8A-A-PKG Dimensions No. PH008-A-P-SD-2.1 ANGLE UNIT mm ABLIC Inc. +0.1 ø1.5 -0 2.25±0.05 4.0±0.1 2.0±0.05 ø0.5±0.1 0.25±0.05 0.65±0.05 4.0±0.1 4 321 5 6 78 Feed direction No. PH008-A-C-SD-2.0 TITLE SNT-8A-A-Carrier Tape No. PH008-A-C-SD-2.0 ANGLE UNIT mm ABLIC Inc. 12.5max. 9.0±0.3 Enlarged drawing in the central part ø13±0.2 (60°) (60°) No. PH008-A-R-SD-1.0 TITLE SNT-8A-A-Reel No. PH008-A-R-SD-1.0 QTY. ANGLE UNIT mm ABLIC Inc. 5,000 0.52 2.01 2 0.52 0.2 0.3 1. 2. 1 (0.25 mm min. / 0.30 mm typ.) (1.96 mm ~ 2.06 mm) 1. 2. 3. 4. 0.03 mm SNT 1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.). 2. Do not widen the land pattern to the center of the package (1.96 mm to 2.06mm). Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package. 2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm or less from the land pattern surface. 3. Match the mask aperture size and aperture position with the land pattern. 4. Refer to "SNT Package User's Guide" for details. 1. 2. (0.25 mm min. / 0.30 mm typ.) (1.96 mm ~ 2.06 mm) TITLE No. PH008-A-L-SD-4.1 SNT-8A-A -Land Recommendation PH008-A-L-SD-4.1 No. ANGLE UNIT mm ABLIC Inc. 2.90±0.2 8 5 1 4 0.13±0.1 0.2±0.1 0.65±0.1 No. FM008-A-P-SD-1.2 TITLE TMSOP8-A-PKG Dimensions No. FM008-A-P-SD-1.2 ANGLE UNIT mm ABLIC Inc. 2.00±0.05 4.00±0.1 4.00±0.1 1.00±0.1 +0.1 1.5 -0 1.05±0.05 0.30±0.05 3.25±0.05 4 1 5 8 Feed direction No. FM008-A-C-SD-2.0 TITLE TMSOP8-A-Carrier Tape FM008-A-C-SD-2.0 No. ANGLE UNIT mm ABLIC Inc. 16.5max. 13.0±0.3 Enlarged drawing in the central part 13±0.2 (60°) (60°) No. FM008-A-R-SD-1.0 TITLE TMSOP8-A-Reel No. FM008-A-R-SD-1.0 QTY. ANGLE UNIT mm ABLIC Inc. 4,000 Disclaimers (Handling Precautions) 1. All the information described herein (product data, specifications, figures, tables, programs, algorithms and application circuit examples, etc.) is current as of publishing date of this document and is subject to change without notice. 2. The circuit examples and the usages described herein are for reference only, and do not guarantee the success of any specific mass-production design. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the reasons other than the products described herein (hereinafter "the products") or infringement of third-party intellectual property right and any other right due to the use of the information described herein. 3. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the incorrect information described herein. 4. Be careful to use the products within their ranges described herein. Pay special attention for use to the absolute maximum ratings, operation voltage range and electrical characteristics, etc. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by failures and / or accidents, etc. due to the use of the products outside their specified ranges. 5. Before using the products, confirm their applications, and the laws and regulations of the region or country where they are used and verify suitability, safety and other factors for the intended use. 6. When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related laws, and follow the required procedures. 7. The products are strictly prohibited from using, providing or exporting for the purposes of the development of weapons of mass destruction or military use. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by any provision or export to the person or entity who intends to develop, manufacture, use or store nuclear, biological or chemical weapons or missiles, or use any other military purposes. 8. The products are not designed to be used as part of any device or equipment that may affect the human body, human life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment, aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses by ABLIC, Inc. Do not apply the products to the above listed devices and equipments. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by unauthorized or unspecified use of the products. 9. In general, semiconductor products may fail or malfunction with some probability. The user of the products should therefore take responsibility to give thorough consideration to safety design including redundancy, fire spread prevention measures, and malfunction prevention to prevent accidents causing injury or death, fires and social damage, etc. that may ensue from the products' failure or malfunction. The entire system in which the products are used must be sufficiently evaluated and judged whether the products are allowed to apply for the system on customer's own responsibility. 10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the product design by the customer depending on the intended use. 11. The products do not affect human health under normal use. However, they contain chemical substances and heavy metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be careful when handling these with the bare hands to prevent injuries, etc. 12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used. 13. The information described herein contains copyright information and know-how of ABLIC Inc. The information described herein does not convey any license under any intellectual property rights or any other rights belonging to ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any part of this document described herein for the purpose of disclosing it to a third-party is strictly prohibited without the express permission of ABLIC Inc. 14. For more details on the information described herein or any other questions, please contact ABLIC Inc.'s sales representative. 15. This Disclaimers have been delivered in a text using the Japanese language, which text, despite any translations into the English language and the Chinese language, shall be controlling. 2.4-2019.07 www.ablic.com
S-89431ACNC-HBVTFG 价格&库存

很抱歉,暂时无法提供与“S-89431ACNC-HBVTFG”相匹配的价格&库存,您可以联系我们找货

免费人工找货