500DAAE-ACF

Si500D D I F F E R E N T I A L O U TP U T S I L I C O N O S C I L L ATO R Features         Quartz-free, MEMS-free, and PLL-free allsilicon oscillator Any output frequencies from 0.9 to 200 MHz Short lead times Excellent temperature stability (±20 ppm) Highly reliable startup and operation High immunity to shock and vibration Low jitter: 80 MHz Mid-level Diff swing Mid-level — — — — 34.0 19.3 14.9 25.3 36.0 22.2 16.5 29.3 mA mA mA mA — 33 36 mA — 16 — mA — — — — — 46 – 13 ns/TCLK — — — VDD – 1.5 .720 — 24.5 24.3 22.2 9.7 1.0 — — — 1.1 — — N/A 27.7 26.7 25 10.7 1.9 54 + 13 ns/TCLK 460 800 1.6 VDD – 1.34 .880 — mA mA mA mA mA % ps ps ns V VPK V Diff swing .68 — .95 VPK Mid-level Diff swing Mid-level Diff swing Mid-level Diff swing DC termination per pad VOH, sourcing 9 mA VOL, sinking 9 mA VOH VOL VOH VOL VOH VOL From time VDD crosses min spec supply 1.15 0.25 0.85 0.25 0.35 0.65 45 VDD – 0.6 — VTT + 0.375 — VTT + 0.48 — VTT + 0.48 — — — — — — — — — — — — — — — — 1.26 0.45 0.96 0.45 0.425 0.82 55 — 0.6 — VTT – 0.375 — VTT – 0.48 — VTT – 0.48 V VPK V VPK V VPK  V V — — 2 ms — — 250 + 3 x TCLK ns — — 250 + 3 x TCLK ns — — 12 + 3 x TCLK µs V V V Notes: 1. Inclusive of 25 °C initial frequency accuracy, operating temperature range, supply voltage change, output load change, first-year aging at 25 °C, shock, vibration, and one solder reflow. 2. Inclusive of 25 °C initial frequency accuracy, operating temperature range, supply voltage change, output load change, ten-year aging at 85 °C, shock, vibration, and one solder reflow. 3. See “AN409: Output Termination Options for the Si500S and Si500D Silicon Oscillators” for further details regarding output clock termination recommendations. 4. VTT = .5 x VDD. 5. VTT = .45 x VDD. 2 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 27, 2021 Si500D Parameters Condition Min Typ Max Units — — 2 Non-CMOS — 1 2 CMOS, CL = 7 pF — 1 3 — 0.6 1 — 0.7 1.5 ms ps RMS ps RMS ps RMS ps RMS Return From Powerdown Time Period Jitter (1-sigma) Integrated Phase Jitter 1.0 MHz – min(20 MHz, 0.4 x FOUT),non-CMOS 1.0 MHz – min(20 MHz, 0.4 x FOUT),CMOS format Notes: 1. Inclusive of 25 °C initial frequency accuracy, operating temperature range, supply voltage change, output load change, first-year aging at 25 °C, shock, vibration, and one solder reflow. 2. Inclusive of 25 °C initial frequency accuracy, operating temperature range, supply voltage change, output load change, ten-year aging at 85 °C, shock, vibration, and one solder reflow. 3. See “AN409: Output Termination Options for the Si500S and Si500D Silicon Oscillators” for further details regarding output clock termination recommendations. 4. VTT = .5 x VDD. 5. VTT = .45 x VDD. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 3 Rev. 1.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 27, 2021 Si500D Package Specifications Table 1. Package Diagram Dimensions (mm) Dimension A A1 b D Min 0.80 0.00 0.59 3.20 BSC. e Nom 0.85 0.03 0.64 Dimension L1 aaa bbb ccc Min 0.00 — — — Nom 0.05 — — — Max 0.10 0.10 0.10 0.08 1.27 BSC. ddd — — 0.10 E 4.00 BSC. eee — — 0.05 L 0.95 1.00 Max 0.90 0.05 0.69 1.05 Table 2. Pad Connections Table 3. Tri-State/Powerdown/Driver Stopped Function on OE (3rd Option Code) 1 OE 2 NC—Make no external connection to this pin 3 GND 4 Output 5 Complementary Output 6 VDD A B C D Open Active Active Active Active 1 TriPowerActive Active Level State down E F Active Active Active Driver Stopped 0 TriPowerDriver Active Active Level State down Stopped Active 0 C CC CC T TTT TT Dimension C1 E X1 Y1 (mm) 2.70 1.27 0.75 1.55 Figure 1. Recommended Land Pattern 4 Y Y WW 0 = Si500 CCCCC = mark code TTTTTT = assembly manufacturing code YY = year WW = work week Figure 2. Top Mark Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 27, 2021 Si500D Environmental Compliance Parameter Conditions/Test Method Mechanical Shock MIL-STD-883, Method 2002.4 Mechanical Vibration MIL-STD-883, Method 2007.3 A Resistance to Soldering Heat MIL-STD-202, 260 C° for 8 seconds Solderability MIL-STD-883, Method 2003.8 Damp Heat IEC 68-2-3 Moisture Sensitivity Level J-STD-020, MSL 3 Ordering Information The Si500D supports a variety of options including frequency, output format, supply voltage, and tristate/powerdown. Specific device configurations are programmed into the Si500D at time of shipment. Configurations are specified using the figure below. Skyworks Solutions provides a web-based part number utility that can be used to simplify part number configuration. Refer to https://www.skyworksinc.com/support-ia to access this tool. The Si500D XO series is supplied in a ROHS-compliant, Pb-free, 6-pad, 3.2 x 4.0 mm package. Tape and reel packaging is available as an ordering option. 500D X Si500 Differential Oscillator 1st Option Code A B C D E F G H J K L M N P Q R S T U V W X VDD Format 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1.8 1.8 1.8 1.8 1.8 1.8 LVPECL Low Power LVPECL LVDS HCSL Dual Output CMOS Differential CMOS Dual Output SSTL Differential SSTL LVPECL Low Power LVPECL LVDS HCSL Dual Output CMOS Differential CMOS Dual Output SSTL Differential SSTL LVDS HCSL Dual Output CMOS Differential CMOS Dual Output SSTL Differential SSTL X X XXMXXXX A C X R Frequency R = Tape & Reel Blank = Cut-Tape xMxxxxx: fOUT < 10 MHz xxMxxxx: 10 MHz < fOUT < 100 MHz xxxMxxx: fOUT > 100 MHz 3rd Option Code Tri-State/Powerdown/ Output Driver Stopped A OE active high/tristate B OE active low/tristate C OE active high/powerdown D OE active low/powerdown E OE active high/driver stopped F OE active low/driver stopped 2nd Option Code A B Stability (ppm, max) ±150 ±250 Oper. Temp Range F 0 to 70 °C *H 0 to 85 °C Product Revision = C Package A 3.2 x 4.0 mm SMD *Note: Only +250 ppm is supported. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 5 Rev. 1.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 27, 2021 Si500D DOCUMENT CHANGE LIST Revision 0.2 to Revision 0.3 Revision B to Revision C updated in Ordering Information  0 to 85 C° Operating Temperature Range option added  Revision 0.3 to Revision 1.0 Clarified SSTL specifications.  Revised Differential CMOS supply current values.  Clarified Differential CMOS supply current loading conditions.  Revision 1.0 to Revision 1.1 Updated Ordering information for ±250 ppm from 0 to +85 °C.  Updated jitter from 1.5 ps to 1.5 ps rms.  Updated operating temperature to include extended commercial at 0 to +85 °C.  Updated features to include LVPECL, LVDS, and HCSL.  6 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 27, 2021 Si500D NOTES: Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 7 Rev. 1.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 27, 2021 ClockBuilder Pro Customize Skyworks clock generators, jitter attenuators and network synchronizers with a single tool. With CBPro you can control evaluation boards, access documentation, request a custom part number, export for in-system programming and more! www.skyworksinc.com/CBPro Portfolio SW/HW Quality Support & Resources www.skyworksinc.com/ia/timing www.skyworksinc.com/CBPro www.skyworksinc.com/quality www.skyworksinc.com/support Copyright © 2021 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks’ Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of Skyworks’ published specifications or parameters. Skyworks, the Skyworks symbol, Sky5®, SkyOne®, SkyBlue™, Skyworks Green™, Clockbuilder®, DSPLL®, ISOmodem®, ProSLIC®, and SiPHY® are trademarks or registered trademarks of Skyworks Solutions, Inc. or its subsidiaries in the United States and other countries. Third-party brands and names are for identification purposes only and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. | Nasdaq: SWKS | sales@skyworksinc.com | www.skyworksinc.com USA: 781-376-3000 | Asia: 886-2-2735 0399 | Europe: 33 (0)1 43548540 |