500SAAA-ACF

Si500S S I N G L E - E N D ED O UTPUT S I L I C O N O S C I L L ATO R Features         Quartz-free, MEMS-free, and PLL-free all-silicon oscillator Any output frequencies from 0.9 to 200 MHz Short lead times Excellent temperature stability (±20 ppm) Highly reliable startup and operation High immunity to shock and vibration Low jitter: 2.5 MHz — 0.7 1.5 ps RMS Notes: 1. Inclusive of 25 °C initial frequency accuracy, operating temperature range, supply voltage change, output load change, first-year aging at 25 °C, shock, vibration, and one solder reflow. 2. Inclusive of 25 °C initial frequency accuracy, operating temperature range, supply voltage change, output load change, ten-year aging at 85 °C, shock, vibration, and one solder reflow. 3. See “AN409: Output Termination Options for the Si500S and Si500D Silicon Oscillators” for further details regarding output clock termination recommendations. 4. VTT = .5 x VDD. 5. VTT = .45 x VDD. 2 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 27, 2021 Si500S Package Specifications Table 1. Package Diagram Dimensions (mm) Dimension Min Nom Max Dimension Min Nom Max A 0.80 0.85 0.90 L1 0.00 0.05 0.10 A1 0.00 0.03 0.05 aaa 0.10 b 1.15 1.20 1.25 bbb 0.10 D 3.20 BSC ccc 0.08 e 2.54 BSC ddd 0.10 E 4.00 BSC eee 0.05 L 0.95 1.00 1.05 Table 2. Pad Connections 1 OE 2 GND 3 Output 4 VDD Dimension C1 E X1 Y1 Table 3. Tri-State/Powerdown/Driver Stopped Function on OE (3rd Option Code) A (mm) 2.90 2.40 1.40 1.70 C D E F Open Active Active B Active Active Active Active 1 Active Level TriState Active Powerdown Active Driver Stopped 0 Level Active PowerDriver Active down Stopped TriState Active 0 C CC CC T TTT TT Y Y WW 0 = Si500 CCCCC = mark code TTTTTT = assembly manufacturing code YY = year WW = work week Figure 1. Recommended Land Pattern Figure 2. Top Mark Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 3 Rev. 1.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 27, 2021 Si500S Environmental Compliance Parameter Conditions/Test Method Mechanical Shock MIL-STD-883, Method 2002.4 Mechanical Vibration MIL-STD-883, Method 2007.3 A Resistance to Soldering Heat MIL-STD-202, 260 C° for 8 seconds Solderability MIL-STD-883, Method 2003.8 Damp Heat IEC 68-2-3 Moisture Sensitivity Level J-STD-020, MSL 3 Ordering Information The Si500S supports a variety of options including frequency, output format, supply voltage, and tristate/powerdown/output driver stopped mode. Specific device configurations are programmed into the Si500S at time of shipment. Configurations are specified using the figure below. Skyworks Solutions provides a web-based part number utility that can be used to simplify part number configuration. Refer to www.skyworksinc.com to access this tool. The Si500S silicon oscillator is supplied in a ROHS-compliant, 4-pad, 3.2 x 4.0 mm package. Tape and reel packaging is available as an ordering option. 500S X Si500 Oscillator 1 st Option Code A D E H J M V DD Format 3.3 3.3 2.5 2.5 1.8 1.8 CMOS SSTL CMOS SSTL CMOS SSTL X X XXMXXXX A C X R Frequency R = Tape & Reel Blank = Cut-Tape xMxxxxx: fOUT < 10 MHz xxMxxxx: 10 MHz < f OUT < 100 MHz xxxMxxx: fOUT > 100 MHz 3 rd Option Code Tri-State/Powerdown/ Output Driver Stopped OE active high/tristate A OE active low/tristate B OE active high/powerdown C OE active low/powerdown D OE active high/driver stopped E OE active low/driver stopped F 2 nd Option Code A B Stability (ppm, max) ±150 ±250 Oper. Temp Range F 0 to 70 °C *H 0 to 85 °C Product Revision = C Package A 3.2 x 4.0 mm SMD *Note: Only +250 ppm is supported. 4 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 27, 2021 Si500S DOCUMENT CHANGE LIST Revision 0.3 to Revision 0.4 Revision B to Revision C updated in Ordering Information  0 to 85 C° Operating Temperature Range option added  Multiple CMOS output format codes removed  Revision 0.4 to Revision 1.0   Clarified SSTL specifications. Revised CMOS supply current max values . Revision 1.0 to Revision 1.1 Updated Ordering information for ±250 ppm from 0 to +85 °C.  Updated jitter from 1.5 ps to 1.5 ps rms.  Updated operating temperature to include extended commercial at 0 to +85 °C.  Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 5 Rev. 1.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 27, 2021 ClockBuilder Pro Customize Skyworks clock generators, jitter attenuators and network synchronizers with a single tool. With CBPro you can control evaluation boards, access documentation, request a custom part number, export for in-system programming and more! www.skyworksinc.com/CBPro Portfolio SW/HW Quality Support & Resources www.skyworksinc.com/ia/timing www.skyworksinc.com/CBPro www.skyworksinc.com/quality www.skyworksinc.com/support Copyright © 2021 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks’ Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of Skyworks’ published specifications or parameters. Skyworks, the Skyworks symbol, Sky5®, SkyOne®, SkyBlue™, Skyworks Green™, Clockbuilder®, DSPLL®, ISOmodem®, ProSLIC®, and SiPHY® are trademarks or registered trademarks of Skyworks Solutions, Inc. or its subsidiaries in the United States and other countries. Third-party brands and names are for identification purposes only and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. | Nasdaq: SWKS | sales@skyworksinc.com | www.skyworksinc.com USA: 781-376-3000 | Asia: 886-2-2735 0399 | Europe: 33 (0)1 43548540 |