AMS002/T

PRODUCT BRIEF Bluetooth® SMART AMS001/AMS002 ‘Bobcat’ Bluetooth Low-Energy: The ‘Smart’ Solution Add ultra-low power wireless connectivity to your application in a heartbeat 17.6 x 11.4 mm FEATURES  Bluetooth Low Energy (Bluetooth SMART) modules fully certified for Bluetooth 4.1 with on-board support for profiles including Battery Status, Blood pressure monitor, Proximity, Thermometer, Glucose and many more.  Small size enables integration into most sensor products and applications  ARM® Cortex™ M3-based microprocessor core  Programmable RF transmit power control and on-board PCB-style antenna  Powered directly from a battery or mains supply  Secure Over-the-Air (OTA) software update using industry-standard AES-128 security  Easily integrated into existing or new products using TruConnect, ACKme’s configurable Bluetooth Low Energy application (pre-installed on every module)  Custom application development on the module with the Broadcom WICED® Smart Software Development Kit GET TO MARKET, FAST! The ‘Bobcat’ family of Bluetooth SMART modules from ACKme Networks HIGHLIGHTS vastly reduces development effort and fast-tracks your latest wireless product to market. HIGHLIGHTS The AMS001/AMS002 ‘Bobcat’ family of modules are fully certified small HIGHLIGHTS form factor, ultra-low power and low-cost Bluetooth Low Energy (Bluetooth SMART) modules perfectly suited to battery and powered operation for medium to high-volume applications. Both modules have identical specifications, with the AMS001 offering ultra-low power, and the AMS002 offering the lowest cost. All modules provides an integrated Bluetooth Low Energy stack, support over the air (OTA) upgrade in conjunction with the integrated serial Flash, and include an on-board PCB-style antenna all in a physical footprint of just 17.6 x 11.4 x 2.4 mm. ACKme TruConnect firmware is pre-installed and licensed to run on all Bobcat modules. TruConnect is an easy-to-use application enabling module control and configuration via a UART-serial interface. TruConnect virtually eliminates difficult and time-consuming software development effort and vastly reduces product development cycles. For customers that prefer to write a custom application replacing TruConnect, ACKme provides support for on-module development using the WICED Smart Software Development Kit from Broadcom®. SYSTEM ARCHITECTURE APPLICATIONS  Wireless serial cable replacement  Health & Fitness equipment including heart rate monitors, blood pressure, thermometers, pedometers, weight scales  Retail advertising and beaconing, proximity detection, point-of-sale  Control, automation, security and monitoring of environmental data  Consumer : Toys, robots, remote controls APB-MS00x-107R | Product Brief November 26, 2014 © 2014 by ACKme Networks, Inc. All rights reserved. ACKme Networks and the ACKme Networks logo are trademarks of ACKme Networks. WICED™ is a trademark of Broadcom Corporation. PRODUCT BRIEF Bluetooth SMART AMS001/AMS002 SPECIFICATIONS Wireless Standard Bluetooth version 4.1 Frequency Band 2400 – 2500 MHz Bluetooth Smart Use Cases Wireless cable replacement, Battery status, Blood pressure monitor, Proximity, Thermometer, Glucose meter, plus many more Communications Interfaces UART, SPI, I2C, SWD Peripherals GPIO, ADC, PWM Data Throughput 270 kbit/s over-the air; 85 kbit/s wireless UART Microprocessor & Memory ARM Cortex-M3 with 60kB RAM (when used with the WICED Smart SDK) Max. RF Transmit Power +4 dBm (max) Receive Sensitivity -94 dBm Communications Range >50m (150ft) line of sight Antenna Integrated PCB-style Power Consumption @ 3.0V, 25°C Deep Sleep : 0.65 µA Sleep : 12 µA Active Rx (mA) AMS001 AMS002 Active Tx (mA) Lowest Power 12.8 26.6 Lowest Cost 10.8 22.0 Supply Voltage 1.8V – 3.6V Operating Temperature -30°C to +85°C Size 17.6 x 11.4 x 2.4 mm (0.70 x 0.45 x 0.10 inches) Certifications FCC, CE, IC Software ACKme TruConnect serial Bluetooth Application is pre-installed on all modules EVALUATION BOARDS Evaluating the Bobcat family of modules using ACKme’s TruConnect serial Bluetooth software is easy. Simply plug the board into a PC using a standard USB cable, open a terminal and start typing! The evaluation board includes:       USB-serial interface for simplified UART communications Four different power supply options including 3V lithium coin cell, Li-Po battery (with integrated charging circuit), external 3.3V and USB Peripheral interface including two buttons, five LEDs for I/O control and status indication, speaker for audio output and a thermistor for temperature measurement Expansion headers to break out every pin on the module Reset button Works with yACKme iOS App Wahoo Evaluation Board Contact us at http://ack.me/contact or +1 (408) 402 5708 AMS001 (Bobcat LP) AMS001 Ultra-low power surface mount module Or for more information, visit us online at http://ack.me AMS002 (Bobcat LC) AMS002 Low power, lowest cost surface mount module AMS001-E01 (Wahoo) AMS001 Surface-mounted on Wahoo Evaluation Board ABOUT ACKme NETWORKS, INC. APB-MS00x-107R | Product Brief November 26, 2014 ACKme Networks offers a range of industry leading cloud-connected wireless communication modules including Wi-Fi, Bluetooth, Bluetooth Low Energy and GPRS cellular. ACKme is headquartered in Silicon Valley, USA with a design centre in Sydney, Australia and a range of international distributors.