DKBLE113

BLE113 DATA SHEET Wednesday, 27 November 2013 Version 1.2 Copyright © 2000-2013 Bluegiga Technologies All rights reserved. Bluegiga Technologies assumes no responsibility for any errors which may appear in this manual. Furthermore, Bluegiga Technologies reserves the right to alter the hardware, software, and/or specifications detailed here at any time without notice and does not make any commitment to update the information contained here. Bluegiga’s products are not authorized for use as critical components in life support devices or systems. The WRAP is a registered trademark of Bluegiga Technologies The Bluetooth trademark is owned by the Bluetooth SIG Inc., USA and is licensed to Bluegiga Technologies. All other trademarks listed herein are owned by their respective owners. Bluegiga Technologies Oy VERSION HISTORY Version Comment 0.1 Draft 0.2 Confidential watermark added 0.3 Marketing information updated 0.4 Current consumption, recommended land pattern, layout guide, example schematic, antenna characteristics 0.5 Minor changes 0.51 Absolute maximum ratings: all supply nets must have the same voltage 0.52 Pin dimensions and recommended land pattern 0.53 FCC and IC statements 0.54 TXP vs HW config setting 0.55 Dimensions 0.56 CE, MIC Japan, KCC 0.57 Chapter 2.1 rephrased 0.58 Missing dimensions added to Figure 7 1.0 Preliminary datasheet -> production datasheet. No changes 1.1 Pull-up resistors added to P1_0 and P1_1 in the example schematic 1.2 5 mm restriction removed from the FCC statement Bluegiga Technologies Oy TABLE OF CONTENTS 1 BLE113 Product numbering ..........................................................................................................................6 2 Pinout and Terminal Description ...................................................................................................................7 2.1 I/O Ports .............................................................................................................................................. 10 2.2 UART ................................................................................................................................................... 10 2.3 Electrical Characteristics ..................................................................................................................... 11 2.4 Absolute Maximum Ratings ................................................................................................................ 11 2.5 Recommended Operating Conditions ................................................................................................. 11 2.6 DC Characteristics .............................................................................................................................. 11 2.7 Current Consumption .......................................................................................................................... 12 2.8 Antenna characteristics ....................................................................................................................... 13 3 Physical Dimensions .................................................................................................................................. 16 4 Power-On Reset and Brownout Detector ................................................................................................... 18 5 Design Guidelines ...................................................................................................................................... 19 5.1 General Design Guidelines ................................................................................................................. 19 5.2 Layout Guide Lines ............................................................................................................................. 19 5.3 BLE113-A Layout Guide ..................................................................................................................... 20 6 Soldering Recommendations ..................................................................................................................... 22 7 Block diagram ............................................................................................................................................. 23 8 Certifications ............................................................................................................................................... 26 9 8.1 Bluetooth ............................................................................................................................................. 26 8.2 FCC and IC ......................................................................................................................................... 26 8.3 CE ....................................................................................................................................................... 29 8.4 MIC Japan ........................................................................................................................................... 29 8.5 KCC (Korea) ........................................................................................................................................ 29 Contact Information .................................................................................................................................... 30 Bluegiga Technologies Oy BLE113 Bluetooth® Smart Module DESCRIPTION BLE113 is a Bluetooth Smart module targeted for small and low power sensors and accessories. It integrates all features required for a Bluetooth Smart application: Bluetooth radio, software stack and GATT based profiles. BLE113 Bluetooth Smart module can also host end user applications, which means no external micro controller is required in size or price constrained devices. BLE113 module has flexible hardware interfaces to connect to different peripherals and sensors. BLE113 can be powered directly from a standard 3V coin cell battery or pair of AAA batteries. KEY FEATURES:     In lowest power sleep mode it consumes only 500nA and will wake up in few hundred microseconds.  APPLICATIONS:          Health and fitness sensors Medical sensors iPhone and iPad accessories Security and proximity tags Key fobs Smart home sensors and collectors Wireless keys HID keyboards and mice    Bluetooth v. 4.0, single mode compliant o Supports master and slave modes o Up to eight connections Integrated Bluetooth Smart stack o GAP, GATT, L2CAP and SMP o Bluetooth Smart profiles Radio performance o TX power : 0 dBm to -23 dBm o Receiver sensitivity: -93 dBm Ultra low current consumption o Transmit: 18.2 mA (0dBm) o Transmit: 14.3 mA (0dBm + DC/DC) o Receive: 14.3 mA o Sleep mode 3: 0.4 uA Flexible peripheral interfaces o UART and SPI o I2C, PWM and GPIO o 12-bit ADC Host interfaces: o UART Programmable 8051 processor for standalone operation Dimensions: 9.15 x 15.75 x 2.1 mm Bluetooth, CE, FCC, IC, South Korea and Japan qualified Bluegiga Technologies Oy 1 BLE113 Product numbering Antenna: A = Internal E = External N = RF pin BLE113-A-X Firmware revision Available products and product codes Product code Description BLE113-A-v1 BLE113 with integrated chip antenna Bluegiga Technologies Oy Page 6 of 30 1 GND 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 GND GND GND GND GND GND AVDD P2_2 P2_1 P2_0 P1_7 P1_6 SCL SDA NC DVDD GND P1_5 P1_4 P1_3 P1_2 P1_1 P1_0 Pinout and Terminal Description GND NC Reset# P0_0 P0_1 P0_2 P0_3 P0_4 P0_5 P0_6 P0_7 GND 36 35 34 33 32 31 30 29 28 27 26 25 19 20 21 22 23 24 2 Figure 1: BLE113 RESET PIN NUMBER 34 PAD TYPE DESCRIPTION Active low reset. GND 1 - 7, 18, 25, 36 GND DVDD AVDD 17 8 Supply voltage Supply voltage GND Supply voltage 2V - 3.6V Supply voltage 2V - 3.6V Table 1: Supply and RF Terminal Descriptions Bluegiga Technologies Oy Page 7 of 30 PIN PIN NAME PIN TYPE NUMBER DESCRIPTION 9 P2_2 10 P2_1 11 12 13 19 20 21 22 26 27 28 29 30 31 32 33 P2_0 P1_7 P1_6 P1_5 P1_4 P1_3 P1_2 P0_7 P0_6 P0_5 P0_4 P0_3 P0_2 P0_1 P0_0 23 P1_1 24 P1_0 14 SCL I2C clock or digital I/O Can be used as I2C clock pin or digital I/O. Leave floating if not used. If grounded disable pull up. 15 SDA I2C data or digital I/O Can be used as I2C data pin or digital I/O. Leave floating if not used. If grounded disable pull up. Digital I/O Configurable I/O port, See table 3 Digital I/O Configurable I/O port with 20mA driving capability, See table 3 Table 2: Terminal Descriptions *)BLE113 is configurable as either SPI master or SPI slave Bluegiga Technologies Oy Page 8 of 30 PERIPHERAL / FUNCTION ADC USART 0 SPI (** USART 0 UART USART 1 SPI (** USART 1 UART TIMER 1 TIMER 3 TIMER 4 P0 7 6 5 4 3 2 1 0 A7 A6 A5 A4 A3 A2 A1 A0 C Alt.1 P1 7 6 4 3 2 MO MI C SS 0 2 P2 1 HARDWARE.XML Example (* 0