EFR32FG1V132F64GM32-C0R

EFR32FG1 Flex Gecko Proprietary Protocol SoC Family Data Sheet The Flex Gecko proprietary protocol family of SoCs is part of the Wireless Gecko portfolio. Flex Gecko SoCs are ideal for enabling energy-friendly proprietary protocol networking for IoT devices. KEY FEATURES • 32-bit ARM® Cortex®-M4 core with 40 MHz maximum operating frequency The single-die solution provides industry-leading energy efficiency, ultra-fast wakeup times, a scalable power amplifier, an integrated balun and no-compromise MCU features. • Scalable Memory and Radio configuration options available in several footprint compatible QFN packages Flex Gecko applications include: • 12-channel Peripheral Reflex System enabling autonomous interaction of MCU peripherals • • • • • Commercial and Retail Home and Building Automation and Security Metering Electronic Shelf Labels Industrial Automation • Autonomous Hardware Crypto Accelerator and Random Number Generator • Integrated 2.4 GHz balun and PA with up to 19.5 dBm transmit power • Integrated DC-DC with RF noise mitigation Core / Memory ARM CortexTM M4 processor with DSP extensions and FPU Flash Program Memory Clock Management Memory Protection Unit RAM Memory Debug Interface DMA Controller Energy Management Other High Frequency Crystal Oscillator High Frequency RC Oscillator Voltage Regulator Voltage Monitor CRYPTO Low Frequency RC Oscillator Auxiliary High Frequency RC Oscillator DC-DC Converter Power-On Reset CRC Low Frequency Crystal Oscillator Ultra Low Frequency RC Oscillator Brown-Out Detector 32-bit bus Peripheral Reflex System RFSENSE Serial Interfaces FRC DEMOD LNA PGA IFADC I/O Ports Timers and Triggers External Interrupts Timer/Counter Protocol Timer ADC Low Energy UARTTM General Purpose I/O Low Energy Timer Watchdog Timer Analog Comparator I2C Pin Reset Pulse Counter Real Time Counter and Calendar IDAC AGC Frequency Synthesizer RAC Q Analog I/F USART RF Frontend PA CRC BALUN I BUFC Radio Transceiver MOD Pin Wakeup Cryotimer Lowest power mode with peripheral operational: EM0—Active EM1—Sleep EM2—Deep Sleep EM3—Stop silabs.com | Smart. Connected. Energy-friendly. This information applies to a product under development. Its characteristics and specifications are subject to change without notice. EM4—Hibernate EM4—Shutoff Preliminary Rev. 0.9 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Feature List 1. Feature List The EFR32FG1 highlighted features are listed below. • Low Power Wireless System-on-Chip. • High Performance 32-bit 40 MHz ARM Cortex®-M4 with DSP instruction and floating-point unit for efficient signal processing • Up to 256 kB flash program memory • Up to 32 kB RAM data memory • 2.4 GHz radio operation • TX power up to 19.5 dBm • Low Energy Consumption • 8.7 mA RX current at 2.4 GHz • 8.8 mA TX current @ 0 dBm output power at 2.4 GHz • 63 μA/MHz in Active Mode (EM0) • 1.4 μA EM2 DeepSleep current (full RAM retention and RTCC running from LFXO) • 1.1 μA EM3 Stop current (State/RAM retention) • Wake on Radio with signal strength detection, preamble pattern detection, frame detection and timeout • High Receiver Performance • -94 dBm sensitivity @ 1 Mbit/s GFSK (2.4GHz) • Supported Modulation Formats • 2-FSK / 4-FSK with fully configurable shaping • Shaped OQPSK / (G)MSK • Configurable DSSS and FEC • Supported Protocols: • 2.4 GHz Proprietary Protocols • Support for Internet Security • General Purpose CRC • Random Number Generator • Hardware Cryptographic Acceleration for AES 128/256, SHA-1, SHA-2 (SHA-224 and SHA-256) and ECC silabs.com | Smart. Connected. Energy-friendly. • Wide selection of MCU peripherals • 12-bit 1 Msps SAR Analog to Digital Converter (ADC) • 2× Analog Comparator (ACMP) • Digital to Analog Current Converter (IDAC) • Up to 31 pins connected to analog channels (APORT) shared between Analog Comparators, ADC, and IDAC • Up to 31 General Purpose I/O pins with output state retention and asynchronous interrupts • 8 Channel DMA Controller • 12 Channel Peripheral Reflex System (PRS) • 2×16-bit Timer/Counter • 3 + 4 Compare/Capture/PWM channels • 32-bit Real Time Counter and Calendar • 16-bit Low Energy Timer for waveform generation • 32-bit Ultra Low Energy Timer/Counter for periodic wake-up from any Energy Mode • 16-bit Pulse Counter with asynchronous operation • Watchdog Timer with dedicated RC oscillator @ 50nA • 2×Universal Synchronous/Asynchronous Receiver/Transmitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I2S) • Low Energy UART (LEUART™) • I2C interface with SMBus support and address recognition in EM3 Stop • Wide Operating Range • 1.85 V to 3.8 V single power supply • Integrated DC-DC, down to 1.8 V output with up to 200 mA load current for system • -40 °C to 85 °C • QFN32 5x5 mm Package • QFN48 7x7 mm Package Preliminary Rev. 0.9 | 1 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Ordering Information 2. Ordering Information Ordering Code Protocol Stack Frequency Band Max TX Power (dBm) EFR32FG1P132F256GM48-B0* Proprietary 2.4 GHz 19.5 EFR32FG1P132F256GM32-B0* Proprietary 2.4 GHz EFR32FG1P132F128GM48-B0* Proprietary EFR32FG1P132F128GM32-B0* Encryption Flash (KB) RAM (KB) GPIO Package Full 256 32 31 QFN48 19.5 Full 256 32 16 QFN32 2.4 GHz 19.5 Full 128 32 31 QFN48 Proprietary 2.4 GHz 19.5 Full 128 32 16 QFN32 EFR32FG1P132F64GM48-B0* Proprietary 2.4 GHz 19.5 Full 64 16 31 QFN48 EFR32FG1P132F64GM32-B0* Proprietary 2.4 GHz 19.5 Full 64 16 16 QFN32 EFR32FG1V132F256GM48-B0* Proprietary 2.4 GHz 16.5 AES only 256 32 31 QFN48 EFR32FG1V132F256GM32-B0* Proprietary 2.4 GHz 16.5 AES only 256 32 16 QFN32 EFR32FG1V132F128GM48-B0* Proprietary 2.4 GHz 16.5 AES only 128 16 31 QFN48 EFR32FG1V132F128GM32-B0* Proprietary 2.4 GHz 16.5 AES only 128 16 16 QFN32 EFR32FG1V132F64GM48-B0* Proprietary 2.4 GHz 16.5 AES only 64 16 31 QFN48 EFR32FG1V132F64GM32-B0* Proprietary 2.4 GHz 16.5 AES only 64 16 16 QFN32 EFR32FG1V132F32GM48-B0* Proprietary 2.4 GHz 16.5 AES only 32 8 31 QFN48 EFR32FG1V132F32GM32-B0* Proprietary 2.4 GHz 16.5 AES only 32 8 16 QFN32 * Engineering Samples EFR32 X G 1 P 132 F 256 G M 32 – B0 R Tape and Reel (Optional) Revision Pin Count Package – M (QFN), J (CSP) Temperature Grade – G (-40 to +85 °C), -I (-40 to +125 °C) Flash Memory Size in kB Memory Type (Flash) Feature Set Code – r2r1r0 r2: Reserved r1: RF Type – 3 (TRX), 2 (RX), 1 (TX) r0: Frequency Band – 1 (Sub-GHz), 2 (2.4 GHz), 3 (Dual-Band) Performance Grade – P (Performance), B (Basic), V (Value) Generation Gecko Family – M (Mighty), B (Blue), F (Flex) Wireless Gecko 32-bit Figure 2.1. OPN Decoder silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 2 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet System Overview 3. System Overview 3.1 Introduction The EFR32 product family combines an energy-friendly MCU with a highly integrated radio transceiver. The devices are well suited for any battery operated application as well as other systems requiring high performance and low energy consumption. This section gives a short introduction to the full radio and MCU system. The detailed functional description can be found in the EFR32 Reference Manual. A block diagram of the EFR32FG1 family is shown in Figure 3.1 Detailed EFR32FG1 Block Diagram on page 3. The diagram shows a superset of features available on the family, which vary by OPN. For more information about specific device features, consult Ordering Information. Radio Transciever RF Frontend I IFADC PGA FRC Digital Peripherals LETIMER LNA PA Frequency Synthesizer Q AGC MOD TIMER RAC BALUN CRC 2G4RF_IOP 2G4RF_ION IOVDD CRYOTIMER PCNT RTC / RTCC ARM Cortex-M4 Core USART RFVDD Up to 256 KB ISP Flash Program Memory LEUART IOVDD Up to 32 KB RAM Energy Management PAVDD Voltage Monitor Memory Protection Unit DVDD Floating Point Unit bypass VREGVDD VREGSW DC-DC Converter Serial Wire Debug / Programming DECOUPLE VSS VREGVSS RFVSS PAVSS RESETn Watchdog Timer Brown Out / Power-On Reset A A H P B B CRYPTO CRC Analog Peripherals Internal Reference VDD ULFRCO AUXHFRCO 12-bit ADC LFXTAL_P / N LFXO HFXO HFXTAL_N Port C Drivers PCn Port D Drivers PDn Port F Drivers PFn VDD Temp Sensor LFRCO HFRCO HFXTAL_P PBn IDAC VREF Clock Management Reset Management Unit Port B Drivers I2C DMA Controller Voltage Regulator PAn Port Mapper Input MUX AVDD Port A Drivers APORT RFSENSE BUFC Port I/O Configuration DEMOD + Analog Comparator Figure 3.1. Detailed EFR32FG1 Block Diagram 3.2 Radio The Flex Gecko family features a radio transceiver supporting proprietary wireless protocols. 3.2.1 Antenna Interface The 2.4 GHz antenna interface consists of two pins (2G4RF_IOP and 2G4RF_ION) that interface directly to the on-chip BALUN. The 2G4RF_ION pin should be grounded externally. The external components and power supply connections for the antenna interface typical applications are shown in the RF Matching Networks section. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 3 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet System Overview 3.2.2 Fractional-N Frequency Synthesizer The EFR32FG1 contains a high performance, low phase noise, fully integrated fractional-N frequency synthesizer. The synthesizer is used in receive mode to generate the LO frequency used by the down-conversion mixer. It is also used in transmit mode to directly generate the modulated RF carrier. The fractional-N architecture provides excellent phase noise performance combined with frequency resolution better than 100 Hz, with low energy consumption. The synthesizer has fast frequency settling which allows very short receiver and transmitter wake up times to optimize system energy consumption. 3.2.3 Receiver Architecture The EFR32FG1 uses a low-IF receiver architecture, consisting of a Low-Noise Amplifier (LNA) followed by an I/Q down-conversion mixer, employing a crystal reference. The I/Q signals are further filtered and amplified before being sampled by the IF analog-to-digital converter (IFADC). The IF frequency is configurable from 150 kHz to 1371 kHz. The IF can further be configured for high-side or low-side injection, providing flexibility with respect to known interferers at the image frequency. The Automatic Gain Control (AGC) module adjusts the receiver gain to optimize performance and avoid saturation for excellent selectivity and blocking performance. Devices are production-calibrated to improve image rejection performance. Demodulation is performed in the digital domain. The demodulator performs configurable decimation and channel filtering to allow receive bandwidths ranging from 0.1 to 2530 kHz. High carrier frequency and baud rate offsets are tolerated by active estimation and compensation. Advanced features supporting high quality communication under adverse conditions include forward error correction by block and convolutional coding as well as Direct Sequence Spread Spectrum (DSSS). A Received Signal Strength Indicator (RSSI) is available for signal quality metrics, for level-based proximity detection, and for RF channel access by Collision Avoidance (CA) or Listen Before Talk (LBT) algorithms. An RSSI capture value is associated with each received frame and the dynamic RSSI measurement can be monitored throughout reception. The EFR32FG1 features integrated support for antenna diversity to improve link budget, using complementary control outputs to an external switch. Internal configurable hardware controls automatic switching between antennae during RF receive detection operations. 3.2.4 Transmitter Architecture The EFR32FG1 uses a direct-conversion transmitter architecture. For constant envelope modulation formats, the modulator controls phase and frequency modulation in the frequency synthesizer. Transmit symbols or chips are optionally shaped by a digital shaping filter. The shaping filter is fully configurable, including the BT product, and can be used to implement Gaussian or Raised Cosine shaping. Carrier Sense Multiple Access - Collision Avoidance (CSMA-CA) or Listen Before Talk (LBT) algorithms can be automatically timed by the EFR32FG1. These algorithms are typically defined by regulatory standards to improve inter-operability in a given bandwidth between devices that otherwise lack synchronized RF channel access. 3.2.5 Wake on Radio The Wake on Radio feature allows flexible, autonomous RF sensing, qualification, and demodulation without required MCU activity, using a subsystem of the EFR32FG1 including the Radio Controller (RAC), Peripheral Reflex System (PRS), and Low Energy peripherals. 3.2.6 RFSENSE The RFSENSE module generates a system wakeup interrupt upon detection of wideband RF energy at the antenna interface, providing true RF wakeup capabilities from low energy modes including EM2, EM3 and EM4. RFSENSE triggers on a relatively strong RF signal and is available in the lowest energy modes, allowing exceptionally low energy consumption. RFSENSE does not demodulate or otherwise qualify the received signal, but software may respond to the wakeup event by enabling normal RF reception. Various strategies for optimizing power consumption and system response time in presence of false alarms may be employed using available timer peripherals. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 4 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet System Overview 3.2.7 Flexible Frame Handling EFR32FG1 has an extensive and flexible frame handling support for easy implementation of even complex communication protocols. The Frame Controller (FRC) supports all low level and timing critical tasks together with the Radio Controller and Modulator/Demodulator: • Highly adjustable preamble length • Up to 2 simultaneous synchronization words, each up to 32 bits and providing separate interrupts • Frame disassembly and address matching (filtering) to accept or reject frames • Automatic ACK frame assembly and transmission • Fully flexible CRC generation and verification: • Multiple CRC values can be embedded in a single frame • 8, 16, 24 or 32-bit CRC value • Configurable CRC bit and byte ordering • Selectable bit-ordering (least significant or most significant bit first) • Optional data whitening • Optional Forward Error Correction (FEC), including convolutional encoding / decoding and block encoding / decoding • Half rate convolutional encoder and decoder with constraint lengths from 2 to 7 and optional puncturing • Optional symbol interleaving, typically used in combination with FEC • Symbol coding, such as Manchester or DSSS, or biphase space encoding using FEC hardware • UART encoding over air, with start and stop bit insertion / removal • Test mode support, such as modulated or unmodulated carrier output • Received frame timestamping 3.2.8 Packet and State Trace The EFR32FG1 Frame Controller has a packet and state trace unit that provides valuable information during the development phase. It features: • Non-intrusive trace of transmit data, receive data and state information • Data observability on a single-pin UART data output, or on a two-pin SPI data output • Configurable data output bitrate / baudrate • Multiplexed transmitted data, received data and state / meta information in a single serial data stream 3.2.9 Data Buffering The EFR32FG1 features an advanced Radio Buffer Controller (BUFC) capable of handling up to 4 buffers of adjustable size from 64 bytes to 4096 bytes. Each buffer can be used for RX, TX or both. The buffer data is located in RAM, enabling zero-copy operations. 3.2.10 Radio Controller (RAC) The Radio Controller controls the top level state of the radio subsystem in the EFR32FG1. It performs the following tasks: • Precisely-timed control of enabling and disabling of the receiver and transmitter circuitry • Run-time calibration of receiver, transmitter and frequency synthesizer • Detailed frame transmission timing, including optional LBT or CSMA-CA 3.2.11 Random Number Generator The Frame Controller (FRC) implements a random number generator that uses entropy gathered from noise in the RF receive chain. The data is suitable for use in cryptographic applications. Output from the random number generator can be used either directly or as a seed or entropy source for software-based random number generator algorithms such as Fortuna. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 5 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet System Overview 3.3 Power The EFR32FG1 has an Energy Management Unit (EMU) and efficient integrated regulators to generate internal supply voltages. Only a single external supply voltage is required, from which all internal voltages are created. An optional integrated DC-DC buck regulator can be utilized to further reduce the current consumption. The DC-DC regulator requires one external inductor and one external capacitor. AVDD and VREGVDD need to be 1.85 V or higher for the MCU to operate across all conditions; however the rest of the system will operate down to 1.62 V, including the digital supply and I/O. This means that the device is fully compatible with 1.8 V components. Running from a sufficiently high supply, the device can use the DC-DC to regulate voltage not only for itself, but also for other PCB components, supplying up to a total of 200 mA. 3.3.1 Energy Management Unit (EMU) The Energy Management Unit manages transitions of energy modes in the device. Each energy mode defines which peripherals and features are available and the amount of current the device consumes. The EMU can also be used to turn off the power to unused RAM blocks, and it contains control registers for the dc-dc regulator and the Voltage Monitor (VMON). The VMON is used to monitor multiple supply voltages. It has multiple channels which can be programmed individually by the user to determine if a sensed supply has fallen below a chosen threshold. 3.3.2 DC-DC Converter The DC-DC buck converter covers a wide range of load currents and provides up to 90% efficiency in energy modes EM0, EM1, EM2 and EM3, and can supply up to 200 mA to the device and surrounding PCB components. Patented RF noise mitigation allows operation of the DC-DC converter without degrading sensitivity of radio components. Protection features include programmable current limiting, short-circuit protection, and dead-time protection. The DC-DC converter may also enter bypass mode when the input voltage is too low for efficient operation. In bypass mode, the DC-DC input supply is internally connected directly to its output through a low resistance switch. Bypass mode also supports in-rush current limiting to prevent input supply voltage droops due to excessive output current transients. 3.4 General Purpose Input/Output (GPIO) EFR32FG1 has up to 31 General Purpose Input/Output pins. Each GPIO pin can be individually configured as either an output or input. More advanced configurations including open-drain, open-source, and glitch-filtering can be configured for each individual GPIO pin. The GPIO pins can be overridden by peripheral connections, like SPI communication. Each peripheral connection can be routed to several GPIO pins on the device. The input value of a GPIO pin can be routed through the Peripheral Reflex System to other peripherals. The GPIO subsystem supports asynchronous external pin interrupts. 3.5 Clocking 3.5.1 Clock Management Unit (CMU) The Clock Management Unit controls oscillators and clocks in the EFR32FG1. Individual enabling and disabling of clocks to all peripheral modules is perfomed by the CMU. The CMU also controls enabling and configuration of the oscillators. A high degree of flexibility allows software to optimize energy consumption in any specific application by minimizing power dissipation in unused peripherals and oscillators. 3.5.2 Internal and External Oscillators The EFR32FG1 supports two crystal oscillators and fully integrates four RC oscillators, listed below. • A high frequency crystal oscillator (HFXO) with integrated load capacitors, tunable in small steps, provides a precise timing reference for the MCU. Crystal frequencies in the range from 38 to 40 MHz are supported. An external clock source such as a TCXO can also be applied to the HFXO input for improved accuracy over temperature. • A 32.768 kHz crystal oscillator (LFXO) provides an accurate timing reference for low energy modes. • An integrated high frequency RC oscillator (HFRCO) is available for the MCU system, when crystal accuracy is not required. The HFRCO employs fast startup at minimal energy consumption combined with a wide frequency range. • An integrated auxilliary high frequency RC oscillator (AUXHFRCO) is available for timing the general-purpose ADC and the Serial Wire debug port with a wide frequency range. • An integrated low frequency 32.768 kHz RC oscillator (LFRCO) can be used as a timing reference in low energy modes, when crystal accuracy is not required. • An integrated ultra-low frequency 1 kHz RC oscillator (ULFRCO) is available to provide a timing reference at the lowest energy consumption in low energy modes. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 6 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet System Overview 3.6 Counters/Timers and PWM 3.6.1 Timer/Counter (TIMER) TIMER peripherals keep track of timing, count events, generate PWM outputs and trigger timed actions in other peripherals through the PRS system. The core of each TIMER is a 16-bit counter with up to 4 compare/capture channels. Each channel is configurable in one of three modes. In capture mode, the counter state is stored in a buffer at a selected input event. In compare mode, the channel output reflects the comparison of the counter to a programmed threshold value. In PWM mode, the TIMER supports generation of pulse-width modulation (PWM) outputs of arbitrary waveforms defined by the sequence of values written to the compare registers, with optional dead-time insertion available in timer unit TIMER_0 only. 3.6.2 Real Time Counter and Calendar (RTCC) The Real Time Counter and Calendar (RTCC) is a 32-bit counter providing timekeeping in all energy modes. The RTCC includes a Binary Coded Decimal (BCD) calendar mode for easy time and date keeping. The RTCC can be clocked by any of the on-board oscillators with the exception of the AUXHFRCO, and it is capable of providing system wake-up at user defined instances. When receiving frames, the RTCC value can be used for timestamping. The RTCC includes 128 bytes of general purpose data retention, allowing easy and convenient data storage in all energy modes. 3.6.3 Low Energy Timer (LETIMER) The unique LETIMER is a 16-bit timer that is available in energy mode EM2 Deep Sleep in addition to EM1 Sleep and EM0 Active. This allows it to be used for timing and output generation when most of the device is powered down, allowing simple tasks to be performed while the power consumption of the system is kept at an absolute minimum. The LETIMER can be used to output a variety of waveforms with minimal software intervention. The LETIMER is connected to the Real Time Counter and Calendar (RTCC), and can be configured to start counting on compare matches from the RTCC. 3.6.4 Ultra Low Power Wake-up Timer (CRYOTIMER) The CRYOTIMER is a 32-bit counter that is capable of running in all energy modes. It can be clocked by either the 32.768 kHz crystal oscillator (LFXO), the 32.768 kHz RC oscillator (LFRCO), or the 1 kHz RC oscillator (ULFRCO). It can provide periodic Wakeup events and PRS signals which can be used to wake up peripherals from any energy mode. The CRYOTIMER provides a wide range of interrupt periods, facilitating flexible ultra-low energy operation. 3.6.5 Pulse Counter (PCNT) The Pulse Counter (PCNT) peripheral can be used for counting pulses on a single input or to decode quadrature encoded inputs. The clock for PCNT is selectable from either an external source on pin PCTNn_S0IN or from an internal timing reference, selectable from among any of the internal oscillators, except the AUXHFRCO. The module may operate in energy mode EM0 Active, EM1 Sleep, EM2 Deep Sleep, and EM3 Stop. 3.6.6 Watchdog Timer (WDOG) The watchdog timer can act both as an independent watchdog or as a watchdog synchronous with the CPU clock. It has windowed monitoring capabilities, and can generate a reset or different interrupts depending on the failure mode of the system. The watchdog can also monitor autonomous systems driven by PRS. 3.7 Communications and Other Digital Peripherals 3.7.1 Universal Synchronous/Asynchronous Receiver/Transmitter (USART) The Universal Synchronous/Asynchronous Receiver/Transmitter is a flexible serial I/O module. It supports full duplex asynchronous UART communication with hardware flow control as well as RS-485, SPI, MicroWire and 3-wire. It can also interface with devices supporting: • ISO7816 SmartCards • IrDA • I2S silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 7 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet System Overview 3.7.2 Low Energy Universal Asynchronous Receiver/Transmitter (LEUART) The unique LEUARTTM provides two-way UART communication on a strict power budget. Only a 32.768 kHz clock is needed to allow UART communication up to 9600 baud. The LEUART includes all necessary hardware to make asynchronous serial communication possible with a minimum of software intervention and energy consumption. 3.7.3 Inter-Integrated Circuit Interface (I2C) The I2C module provides an interface between the MCU and a serial I2C bus. It is capable of acting as both a master and a slave and supports multi-master buses. Standard-mode, fast-mode and fast-mode plus speeds are supported, allowing transmission rates from 10 kbit/s up to 1 Mbit/s. Slave arbitration and timeouts are also available, allowing implementation of an SMBus-compliant system. The interface provided to software by the I2C module allows precise timing control of the transmission process and highly automated transfers. Automatic recognition of slave addresses is provided in active and low energy modes. 3.7.4 Peripheral Reflex System (PRS) The Peripheral Reflex System provides a communication network between different peripheral modules without software involvement. Peripheral modules producing Reflex signals are called producers. The PRS routes Reflex signals from producers to consumer peripherals which in turn perform actions in response. Edge triggers and other functionality can be applied by the PRS. The PRS allows peripheral to act autonomously without waking the MCU core, saving power. 3.8 Security Features 3.8.1 GPCRC (General Purpose Cyclic Redundancy Check) The GPCRC module implements a Cyclic Redundancy Check (CRC) function. It supports both 32-bit and 16-bit polynomials. The supported 32-bit polynomial is 0x04C11DB7 (IEEE 802.3), while the 16-bit polynomial can be programmed to any value, depending on the needs of the application. 3.8.2 Crypto Accelerator (CRYPTO) The Crypto Accelerator is a fast and energy-efficient autonomous hardware encryption and decryption accelerator. EFR32 devices support various levels of hardware-accelerated encryption, depending on the part number. The Ordering Information Table specifies whether this part has full or AES-only crypto support. AES-only devices support AES encryption and decryption with 128- or 256-bit keys. Full crypto support adds ECC over both GF(P) and GF(2m), SHA-1 and SHA-2 (SHA-224 and SHA-256). Supported modes of operation for AES include: ECB, CTR, CBC, PCBC, CFB, OFB, CBC-MAC, GMAC and CCM. Supported ECC NIST recommended curves include P-192, P-224, P-256, K-163, K-233, B-163 and B-233. The CRYPTO is tightly linked to the Radio Buffer Controller (BUFC) enabling fast and efficient autonomous cipher operations on data buffer content. It allows fast processing of GCM (AES), ECC and SHA with little CPU intervention. CRYPTO also provides trigger signals for DMA read and write operations. 3.9 Analog 3.9.1 Analog Port (APORT) The Analog Port (APORT) is an analog interconnect matrix allowing access to analog modules ADC, ACMP, and IDAC on a flexible selection of pins. Each APORT bus consists of analog switches connected to a common wire. Since many clients can operate differentially, buses are grouped by X/Y pairs. 3.9.2 Analog Comparator (ACMP) The Analog Comparator is used to compare the voltage of two analog inputs, with a digital output indicating which input voltage is higher. Inputs are selected from among internal references and external pins. The tradeoff between response time and current consumption is configurable by software. Two 6-bit reference dividers allow for a wide range of internally-programmable reference sources. The ACMP can also be used to monitor the supply voltage. An interrupt can be generated when the supply falls below or rises above the programmable threshold. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 8 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet System Overview 3.9.3 Analog to Digital Converter (ADC) The ADC is a Successive Approximation Register (SAR) architecture, with a resolution of up to 12 bits at up to 1 MSamples/s. The output sample resolution is configurable and additional resolution is possible using integrated hardware for averaging over multiple samples. The ADC includes integrated voltage references and an integrated temperature sensor. Inputs are selectable from a wide range of sources, including pins configurable as either single-ended or differential. 3.9.4 Digital to Analog Current Converter (IDAC) The Digital to Analog Current Converter can source or sink a configurable constant current. This current can be driven on an output pin or routed to the selected ADC input pin for capacitive sensing. The current is programmable between 0.05 µA and 64 µA with several ranges with various step sizes. 3.10 Reset Management Unit (RMU) The RMU is responsible for handling reset of the EFR32FG1. A wide range of reset sources are available, including several power supply monitors, pin reset, software controlled reset, core lockup reset and watchdog reset. 3.11 Core and Memory 3.11.1 Processor Core The ARM Cortex-M processor includes a 32-bit RISC processor integrating the following features and tasks in the system: • ARM Cortex-M4 RISC processor achieving 1.25 Dhrystone MIPS/MHz • Memory Protection Unit (MPU) supporting up to 8 memory segments • Up to 256 KB flash program memory • Up to 32 KB RAM data memory • Configuration and event handling of all modules • 2-pin Serial-Wire debug interface 3.11.2 Memory System Controller (MSC) The Memory System Controller (MSC) is the program memory unit of the microcontroller. The flash memory is readable and writable from both the Cortex-M and DMA. The flash memory is divided into two blocks; the main block and the information block. Program code is normally written to the main block, whereas the information block is available for special user data and flash lock bits. There is also a read-only page in the information block containing system and device calibration data. Read and write operations are supported in energy modes EM0 Active and EM1 Sleep. 3.11.3 Linked Direct Memory Access Controller (LDMA) The Linked Direct Memory Access (LDMA) controller features 8 channels capable of performing memory operations independently of software. This reduces both energy consumption and software workload. The LDMA allows operations to be linked together and staged, enabling sophisticated operations to be implemented. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 9 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet System Overview 3.12 Memory Map The EFR32FG1 memory map is shown in the figures below. RAM and flash sizes are for the largest memory configuration. Figure 3.2. EFR32FG1 Memory Map — Core Peripherals and Code Space silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 10 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet System Overview Figure 3.3. EFR32FG1 Memory Map — Peripherals 3.13 Configuration Summary The features of the EFR32FG1 are a subset of the feature set described in the device reference manual. The table below describes device specific implementation of the features. Remaining modules support full configuration. Table 3.1. Configuration Summary Module Configuration Pin Connections USART0 IrDA SmartCard US0_TX, US0_RX, US0_CLK, US0_CS USART1 IrDA I2S SmartCard US1_TX, US1_RX, US1_CLK, US1_CS TIMER0 with DTI. TIM0_CC[2:0], TIM0_CDTI[2:0] TIMER1 silabs.com | Smart. Connected. Energy-friendly. TIM1_CC[3:0] Preliminary Rev. 0.9 | 11 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4. Electrical Specifications 4.1 Electrical Characteristics All electrical parameters in all tables are specified under the following conditions, unless stated otherwise: • Typical values are based on TAMB=25 °C and VDD= 3.3 V, by production test and/or technology characterization. • Radio performance numbers are measured in conducted mode, based on Silicon Laboratories reference designs using output power-specific external RF impedance-matching networks for interfacing to a 50 Ω antenna. • Minimum and maximum values represent the worst conditions across supply voltage, process variation, and an operating temperature of -40 to +85 °C, unless stated otherwise. Refer to Table 4.2 General Operating Conditions on page 14 for more details about operational supply and temperature limits. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 12 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.1 Absolute Maximum Ratings Stresses above those listed below may cause permanent damage to the device. This is a stress rating only and functional operation of the devices at those or any other conditions above those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. For more information on the available quality and reliability data, see the Quality and Reliability Monitor Report at http://www.silabs.com/support/quality/pages/default.aspx. Table 4.1. Absolute Maximum Ratings Parameter Symbol Storage temperature range TSTG Min Typ Max Unit -50 — 150 °C External main supply voltage VDDMAX 0 — 3.8 V External main supply voltage VDDRAMPMAX ramp rate — — 1 V / μs -0.3 — Min of 5.25 and IOVDD +2 V -0.3 — IOVDD+0.3 V -0.3 — 1.4 V Voltage on any 5V tolerant GPIO pin1 VDIGPIN Voltage on non-5V tolerant GPIO pins Test Condition Voltage on HFXO pins VHFXOPIN Input RF level on pins 2G4RF_IOP and 2G4RF_ION PRFMAX2G4 — — 10 dBm Voltage differential between RF pins (2G4RF_IOP 2G4RF_ION) VMAX2G4 -50 — 50 mV -0.3 — 3.3 V Total current into VSS ground IVSSMAX lines (sink) — — 200 mA Current per I/O pin (sink) — — 50 mA — — 50 mA — — 200 mA — — 200 mA — — 0.3 V Absolute Voltage on RF pins VMAXDIFF2G4 2G4RF_IOP and 2G4RF_ION IIOMAX Current per I/O pin (source) Current for all I/O pins (sink) IIOALLMAX Current for all I/O pins (source) Voltage difference between AVDD and VREGVDD ΔVDD Note: 1. When a GPIO pin is routed to the analog module through the APORT, the maximum voltage = IOVDD. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 13 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.2 Operating Conditions When assigning supply sources, the following requirements must be observed: • VREGVDD must be the highest voltage in the system • VREGVDD = AVDD • DVDD ≤ AVDD • IOVDD ≤ AVDD • RFVDD ≤ AVDD • PAVDD ≤ AVDD 4.1.2.1 General Operating Conditions Table 4.2. General Operating Conditions Parameter Symbol Test Condition Min Typ Max Unit -G temperature grade -40 25 85 °C 1.85 3.3 3.8 V 2.4 3.3 3.8 V DCDC in bypass 50mA load TBD 3.3 3.8 V DCDC not in use. DVDD externally shorted to VREGVDD 1.85 3.3 3.8 V 1.62 — VVREGVDD V DVDD Operating supply volt- VDVDD age 1.62 — VVREGVDD V PAVDD Operating supply voltage VPAVDD 1.62 — VVREGVDD V IOVDD Operating supply voltage VIOVDD 1.62 — VVREGVDD V — — 0.1 V 0 wait-states (MODE = WS0) 3 — — 26 MHz 1 wait-states (MODE = WS1) 3 — 38.4 40 MHz Operating temperature range TOP AVDD Supply voltage1 VAVDD VREGVDD Operating supply VVREGVDD voltage12 RFVDD Operating supply voltage DCDC in regulation VRFVDD Difference between AVDD dVDD and VREGVDD, ABS(AVDDVREGVDD) HFCLK frequency fCORE Note: 1. VREGVDD must be tied to AVDD. Both VREGVDD and AVDD minimum voltages must be satisfied for the part to operate. 2. The minimum voltage required in bypass mode is calculated using RBYP from the DCDC specification table. Requirements for other loads can be calculated as VDVDD_min+ILOAD * RBYP_max 3. in MSC_READCTRL register silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 14 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.3 Thermal Characteristics Table 4.3. Thermal Characteristics Parameter Symbol Test Condition Thermal Resistance THETAJA silabs.com | Smart. Connected. Energy-friendly. Min Typ Max Unit QFN32 Package, 2-Layer PCB, Air velocity = 0 m/s — 79 — °C/W QFN32 Package, 2-Layer PCB, Air velocity = 1 m/s — 62.2 — °C/W QFN32 Package, 2-Layer PCB, Air velocity = 2 m/s — 54.1 — °C/W QFN32 Package, 4-Layer PCB, Air velocity = 0 m/s — 32 — °C/W QFN32 Package, 4-Layer PCB, Air velocity = 1 m/s — 28.1 — °C/W QFN32 Package, 4-Layer PCB, Air velocity = 2 m/s — 26.9 — °C/W QFN48 Package, 2-Layer PCB, Air velocity = 0 m/s — 64.5 — °C/W QFN48 Package, 2-Layer PCB, Air velocity = 1 m/s — 51.6 — °C/W QFN48 Package, 2-Layer PCB, Air velocity = 2 m/s — 47.7 — °C/W QFN48 Package, 4-Layer PCB, Air velocity = 0 m/s — 26.2 — °C/W QFN48 Package, 4-Layer PCB, Air velocity = 1 m/s — 23.1 — °C/W QFN48 Package, 4-Layer PCB, Air velocity = 2 m/s — 22.1 — °C/W Preliminary Rev. 0.9 | 15 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.4 DC-DC Converter Test conditions: LDCDC=4.7 µH, CDCDC=1.0 µF (Murata GRM188R71A105KA61D), VDCDC_I=3.3 V, VDCDC_O=1.8 V, IDCDC_LOAD=50 mA, Heavy Drive configuration, FDCDC_LN=8 MHz, unless otherwise indicated. Table 4.4. DC-DC Converter Parameter Symbol Test Condition Min Typ Max Unit Input voltage range VDCDC_I Bypass mode, Strong Bypass with PMOS enabled, assumes inductor DCR of 140 mOhms, IDCDC_LOAD = 50 mA TBD — 3.8 V Low noise (LN) mode, 1.8 V output, IDCDC_LOAD = 100 mA, or Low power (LP) mode, 1.8 V output, IDCDC_LOAD = 10 mA 2.4 — 3.8 V Low noise (LN) mode, 1.8 V output, IDCDC_LOAD = 200 mA TBD — 3.8 V Output voltage programmable range VDCDC_O 1.8V configuration TBD 1.8 — V Regulation DC Accuracy ACCDC Low noise (LN) mode, 1.8 V target output TBD — TBD mV Low power (LP) mode, LPCMPBIAS1 = 0, 1.8 V target output, IDCDC_LOAD = 200 μA TBD — TBD mV Low power (LP) mode, LPCMPBIAS1 = 3, 1.8 V target output, IDCDC_LOAD = 10 mA TBD — TBD mV Steady-state output ripple VR Radio disabled. — 3 — mVpp Output voltage under/overshoot VOV CCM Mode (LNFORCECCM1 = 1), Load changes between 0 mA and 100 mA — — 150 mV DCM Mode (LNFORCECCM1 = 0), Load changes between 0 mA and 10 mA — — 150 mV DC line regulation VREG Input changes between 3.8 V and 2.4 V — 0.1 — % DC load regulation IREG Load changes between 0 mA and 100 mA in CCM mode — 0.1 — % Max load current ILOAD_MAX Low noise (LN) Heavy Drive2 — — 200 mA Low noise (LN) mode, Medium Drive2 — — 100 mA Low noise (LN) mode, Light Drive2 — — 50 mA Low power (LP) mode, LPCMPBIAS1 = 3 — — 10 mA DCDC output capacitor CDCDC 25% tolerance TBD 1 TBD μF DCDC output inductor LDCDC 20% tolerance — 4.7 — μH silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 16 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications Parameter Symbol Test Condition Min Typ Max Unit Resistance in Bypass mode RBYP BYPPFETEN = 0 TBD 1.2 TBD Ω BYPPFETEN = 1 TBD 0.8 TBD Ω Note: 1. In EMU_DCDCMISCCTRL register 2. Drive levels are defined by configuration of the PFETCNT and NFETCNT registers. Light Drive: PFETCNT=NFETCNT=3; Medium Drive: PFETCNT=NFETCNT=7; Heavy Drive: PFETCNT=NFETCNT=15. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 17 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.5 Current Consumption 4.1.5.1 Current Consumption 1.85 V without DC-DC Converter Unless otherwise indicated VREGVDD = AVDD = DVDD = RFVDD = PAVDD= 1.85 V. EMU_PWRCFG_PWRCG=NODCDC. EMU_DCDCCTRL_DCDCMODE=BYPASS. See Figure 5.1 EFR32FG1 Typical Application Circuit: Direct Supply Configuration without DC-DC converter on page 48. Table 4.5. Current Consumption 1.85V without DC/DC Parameter Symbol Min Typ Max Unit 38.4 MHz crystal, CPU running while loop from flash — 128 — μA/MHz 38 MHz HFRCO, CPU running Prime from flash — 87 — μA/MHz 38 MHz HFRCO, CPU running while loop from flash — 103 — μA/MHz 38 MHz HFRCO, CPU running CoreMark from flash — 112 — μA/MHz 26 MHz HFRCO, CPU running while loop from flash — 105 — μA/MHz 1 MHz HFRCO, CPU running while loop from flash — 235 — μA/MHz 38.4 MHz crystal — 61 — μA/MHz 38 MHz HFRCO — 35 — μA/MHz 26 MHz HFRCO — 37 — μA/MHz 1 MHz HFRCO — 167 — μA/MHz Full RAM retention and RTCC running from LFXO — 3.36 — μA 4 kB RAM retention and RTCC running from LFRCO — 3.13 — μA Current consumption in EM3 IEM3 Stop mode Full RAM retention and CRYOTIMER running from ULFRCO — 2.84 — μA Current consumption in EM4H Hibernate mode 128 byte RAM retention, RTCC running from LFXO — 1.08 — μA 128 byte RAM retention, CRYOTIMER running from ULFRCO — 0.64 — μA 128 byte RAM retention, no RTCC — 0.63 — μA No RAM retention, no RTCC — 0.02 — μA Current consumption in EM0 IACTIVE Active mode with radio disabled, All peripherals disabled Current consumption in EM1 IEM1 Sleep mode with radio disabled. All peripherals disabled Current consumption in EM2 IEM2 Deep Sleep mode. Current consumption in EM4S Shutoff mode IEM4 IEM4S silabs.com | Smart. Connected. Energy-friendly. Test Condition Preliminary Rev. 0.9 | 18 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.5.2 Current Consumption 3.3 V without DC-DC Converter Unless otherwise indicated VREGVDD = AVDD = DVDD = RFVDD = PAVDD= 3.3 V. EMU_PWRCFG_PWRCG=NODCDC. EMU_DCDCCTRL_DCDCMODE=BYPASS. See Figure 5.3 EFR32FG1 Typical Application Circuit: Configuration with DC-DC Coverter (PAVDD from VDD) on page 49. Table 4.6. Current Consumption 3.3V without DC/DC Parameter Symbol Min Typ Max Unit 38.4 MHz crystal, CPU running while loop from flash — 129 — μA/MHz 38 MHz HFRCO, CPU running Prime from flash — 87 — μA/MHz 38 MHz HFRCO, CPU running while loop from flash — 103 — μA/MHz 38 MHz HFRCO, CPU running CoreMark from flash — 112 — μA/MHz 26 MHz HFRCO, CPU running while loop from flash — 105 — μA/MHz 1 MHz HFRCO, CPU running while loop from flash — 237 — μA/MHz 38.4 MHz crystal — 61 — μA/MHz 38 MHz HFRCO — 35 — μA/MHz 26 MHz HFRCO — 37 — μA/MHz 1 MHz HFRCO — 170 — μA/MHz Full RAM retention and RTCC running from LFXO — 3.47 — μA 4 kB RAM retention and RTCC running from LFRCO — 3.35 — μA Current consumption in EM3 IEM3 Stop mode Full RAM retention and CRYOTIMER running from ULFRCO — 2.92 — μA Current consumption in EM4H Hibernate mode 128 byte RAM retention, RTCC running from LFXO — 1.13 — μA 128 byte RAM retention, CRYOTIMER running from ULFRCO — 0.67 — μA 128 byte RAM retention, no RTCC — 0.66 — μA no RAM retention, no RTCC — 0.04 — μA Current consumption in EM0 IACTIVE Active mode with radio disabled, All peripherals disabled Current consumption in EM1 IEM1 Sleep mode with radio disabled. All peripherals disabled Current consumption in EM2 IEM2 Deep Sleep mode. Current consumption in EM4S Shutoff mode IEM4 IEM4S silabs.com | Smart. Connected. Energy-friendly. Test Condition Preliminary Rev. 0.9 | 19 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.5.3 Current Consumption 3.3 V using DC-DC Converter Unless otherwise indicated VREGVDD = AVDD = IOVDD = 3.3 V, DVDD = RFVDD = PAVDD= 1.8 V DC-DC output. See Figure 5.2 EFR32FG1 Typical Application Circuit: Configuration with DC-DC Coverter (PAVDD from VDCDC) on page 48. Table 4.7. Current Consumption 3.3V with DC/DC Parameter Symbol Min Typ Max Unit 38.4 MHz crystal, CPU running while loop from flash. — 87 — μA/MHz 38 MHz HFRCO, CPU running Prime from flash — 63 — μA/MHz 38 MHz HFRCO, CPU running while loop from flash — 72 — μA/MHz 38 MHz HFRCO, CPU running CoreMark from flash — 78 — μA/MHz 26 MHz HFRCO, CPU running while loop from flash — 79 — μA/MHz 38.4 MHz crystal — 39 — μA/MHz 38 MHz HFRCO — 23 — μA/MHz 26 MHz HFRCO — 25 — μA/MHz 1 MHz HFRCO — 142 — μA/MHz Full RAM retention and RTCC running from LFXO — 1.4 — μA 4 kB RAM retention and RTCC running from LFRCO — 1.4 — μA Current consumption in EM3 IEM3 Stop mode Full RAM retention and CRYOTIMER running from ULFRCO — 1.1 — μA Current consumption in EM4H Hibernate mode 128 byte RAM retention, RTCC running from LFXO — 0.9 — μA 128 byte RAM retention, CRYOTIMER running from ULFRCO — 0.6 — μA 128 byte RAM retention, no RTCC — 0.6 — μA no RAM retention, no RTCC — 0.03 — μA Current consumption in EM0 IACTIVE Active mode with radio disabled. All peripherals disabled, DCDC in LowNoise mode Current consumption in EM1 IEM1 Sleep mode with radio disabled. All peripherals disabled, DCDC in LowPower mode. Current consumption in EM2 IEM2 Deep Sleep mode. Current consumption in EM4S Shutoff mode IEM4 IEM4S silabs.com | Smart. Connected. Energy-friendly. Test Condition Preliminary Rev. 0.9 | 20 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.5.4 Current Consumption Using Radio Unless otherwise indicated VREGVDD = AVDD = IOVDD = 3.3 V, DVDD = RFVDD = PAVDD. See Figure 5.2 EFR32FG1 Typical Application Circuit: Configuration with DC-DC Coverter (PAVDD from VDCDC) on page 48 or Figure 5.3 EFR32FG1 Typical Application Circuit: Configuration with DC-DC Coverter (PAVDD from VDD) on page 49. Table 4.8. Current Consumption Using Radio 3.3 V with DC-DC Parameter Symbol Test Condition Min Typ Max Unit Current consumption in receive mode, active packet reception (MCU in EM1 @ 38.4 MHz, peripheral clocks disabled) IRX 1 Mbit/s, 2GFSK, F = 2.4 GHz, Radio clock prescaled by 4 — 8.7 — mA Current consumption in transmit mode (MCU in EM1 @ 38.4 MHz, peripheral clocks disabled) ITX CW, 0 dBm, F = 2.4 GHz, Radio clock prescaled by 3 — 8.8 — mA CW, 3 dBm, F = 2.4 GHz — 17.6 — mA CW, 8 dBm, F = 2.4 GHz — 26.1 — mA CW, 10.5 dBm, F = 2.4 GHz — 34.1 — mA CW, 16.5 dBm, F = 2.4 GHz, PAVDD connected directly to external 3.3V supply — 88 — mA CW, 19.5 dBm, F = 2.4 GHz, PAVDD connected directly to external 3.3V supply — 133 — mA — 51 — nA Min Typ Max Unit RFSENSE current consump- IRFSENSE tion 4.1.6 Wake up times Table 4.9. Wake up times Parameter Symbol Test Condition Wake up from EM2 Deep Sleep tEM2_WU Code execution from flash — 10.7 — μs Code execution from RAM — 3 — μs Wakeup time from EM1 Sleep tEM1_WU Executing from flash — 3 — AHB Clocks Executing from RAM — 3 — AHB Clocks Executing from flash — 10.7 — μs Executing from RAM — 3 — μs Executing from flash — 60 — μs — 290 — μs Wake up from EM3 Stop tEM3_WU Wake up from EM4H Hibernate 1 tEM4H_WU Wake up from EM4S Shutoff1 tEM4S_WU Note: 1. Time from wakeup request until first instruction is executed. Wakeup results in device reset. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 21 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.7 Brown Out Detector Table 4.10. Brown Out Detector Parameter Symbol Test Condition Min Typ Max Unit DVDDBOD threshold VDVDDBOD DVDD rising — — TBD V DVDD falling TBD — — V DVDD BOD hysteresis VDVDDBOD_HYST — 24 — mV DVDD response time tDVDDBOD_DELAY Supply drops at 0.1V/μs rate — 2.4 — μs AVDD BOD threshold VAVDDBOD AVDD rising — — 1.85 V AVDD falling TBD — — V AVDD BOD hysteresis VAVDDBOD_HYST — 21 — mV AVDD response time tAVDDBOD_DELAY Supply drops at 0.1V/μs rate — 2.4 — μs EM4 BOD threshold VEM4DBOD AVDD rising — — TBD V AVDD falling TBD — — V — 46 — mV — 300 — μs EM4 BOD hysteresis VEM4BOD_HYST EM4 response time tEM4BOD_DELAY Supply drops at 0.1V/μs rate 4.1.8 Frequency Synthesizer Characteristics Table 4.11. Frequency Synthesizer Characteristics Parameter Symbol Test Condition Min Typ Max Unit RF Synthesizer Frequency range FRANGE_2400 2.4 GHz frequency range 2400 — 2483.5 MHz LO tuning frequency resolution with 38.4 MHz crystal FRES_2400 2400 - 2483.5 MHz — — 73 Hz Maximum frequency deviation with 38.4 MHz crystal ΔFMAX_2400 — — 1677 kHz silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 22 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.9 2.4 GHz RF Transceiver Characteristics 4.1.9.1 RF Transmitter General Characteristics for the 2.4 GHz Band Unless otherwise indicated T=25C,VREGVDD = AVDD = IOVDD = 3.3 V, DVDD = RFVDD = PAVDD. RFVDD and PAVDD path is filtered using ferrites. Crystal frequency=38.4MHz. RF center frequency 2.45 GHz. Test circuit according to Figure 5.2 EFR32FG1 Typical Application Circuit: Configuration with DC-DC Coverter (PAVDD from VDCDC) on page 48 and Figure 5.4 Typical 2.4 GHz RF impedance-matching network circuits on page 49. Table 4.12. RF Transmitter General Characteristics for 2.4 GHz Band Parameter Symbol Test Condition Min Typ Max Unit Maximum TX power1 POUTMAX 19.5 dBm-rated part numbers. PAVDD connected directly to external 3.3V supply — 19.5 — dBm 16.5 dBm-rated part numbers. PAVDD connected directly to external 3.3V supply — 16.5 — dBm -30 — dBm Minimum active TX Power POUTMIN CW Output power step size POUTSTEP -5 dBm< Output power < 0 dBm — 1 — dB 0 dBm < output power < POUTMAX — 0.5 — dB 1.85 V < VVREGVDD < 3.3 V without DC-DC converter, operation at higher than 10.5 dBm. — 4.5 — dB 1.85 V < VVREGVDD < 3.3 V using DC-DC converter — 2.1 — dB From -40 to +85 °C, PAVDD connected to DCDC output — 1.4 — dB From -40 to +85 °C, PAVDD connected to external supply — 1.4 — dB Over RF tuning frequency range — 0.5 — dB 2400 — 2483.5 MHz Output power variation vs supply at POUTMAX Output power variation vs temperature at POUTMAX POUTVAR_V POUTVAR_T Output power variation vs RF POUTVAR_F frequency at POUTMAX RF tuning frequency range FRANGE Note: 1. Supported transmit power levels are determined by the ordering part number (OPN). Transmit power ratings for all devices covered in this datasheet can be found in the Max TX Power column of 2. Ordering Information silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 23 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.9.2 RF Receiver General Characteristics for the 2.4 GHz Band Unless otherwise indicated T=25C,VREGVDD = AVDD = IOVDD = 3.3 V, DVDD = RFVDD = PAVDD. RFVDD and PAVDD path is filtered using ferrites. Crystal frequency=38.4MHz. RF center frequency 2.440 GHz. Test circuit according to Figure 5.2 EFR32FG1 Typical Application Circuit: Configuration with DC-DC Coverter (PAVDD from VDCDC) on page 48 and Figure 5.4 Typical 2.4 GHz RF impedance-matching network circuits on page 49. Table 4.13. RF Receiver General Characteristics for 2.4 GHz Band Parameter Symbol RF tuning frequency range FRANGE Receive mode maximum spurious emission SPURRX Level above which RFSENSE will trigger RFSENSETRIG Level below which RFSENSE will not trigger RFSENSETHRES 1% PER Sensitivity SENS2GFSK 0.1% BER Sensitivity silabs.com | Smart. Connected. Energy-friendly. Test Condition Min Typ Max Unit 2400 — 2483.5 MHz 30 MHz to 1 GHz — -57 — dBm 1 GHz to 12 GHz — -47 — dBm CW at 2.45 GHz — -24 — dBm — -50 — dBm 2 Mbps 2GFSK signal — -90.5 — dBm 250 kbps 2GFSK signal — -99.2 — dBm Preliminary Rev. 0.9 | 24 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.9.3 RF Transmitter Characteristics for 1Mbps 2GFSK in the 2.4 GHz Band Unless otherwise indicated T=25C,VREGVDD = AVDD = IOVDD = 3.3 V, DVDD = RFVDD = PAVDD. RFVDD and PAVDD path is filtered using ferrites. Crystal frequency=38.4MHz. RF center frequency 2.44 GHz. Test circuit according to Figure 5.2 EFR32FG1 Typical Application Circuit: Configuration with DC-DC Coverter (PAVDD from VDCDC) on page 48 and Figure 5.4 Typical 2.4 GHz RF impedance-matching network circuits on page 49. Table 4.14. RF Transmitter Characteristics for 1Mbps 2GFSK in the 2.4GHz Band Parameter Symbol Transmit 6dB bandwidth TXBW Power spectral density limit PSDLIMIT Min Typ Max Unit — 740 — kHz Per FCC part 15.247 — -6.5 — dBm/ 3kHz Per ETSI 300.328 at 10 dBm/1 MHz — 10 — dBm Occupied channel bandwidth OCPETSI328 per ETSI EN300.328 99% BW at highest and lowest channels in band — 1.1 — MHz Emissions of harmonics outof-band, per FCC part 15.247 2nd,3rd, 5, 6, 8, 9,10 harmonics; continuous transmission of modulated carrier — -47.3 — dBm Spurious emissions out-ofSPUROOB_FCC band, per FCC part 15.247, excluding harmonics captured in SPURHARM,FCC. Restricted Bands Above 2.483 GHz or below 2.4 GHz; continuous transmission of modulated carrier1 — -47 — dBm Spurious emissions out-ofband, per FCC part 15.247, excluding harmonics captured in SPURHARM,FCC. Non Restricted Bands Above 2.483 GHz or below 2.4 GHz; continuous transmission of modulated carrier — -26 — dBc [2400-BW to 2400] MHz, [2483.5 to 2483.5+BW] MHz — -16 — dBm [2400-2BW to 2400-BW] MHz, [2483.5+BW to 2483.5+2BW] MHz per ETSI 300.328 — -26 — dBm 47-74 MHz,87.5-108 MHz, 174-230 MHz, 470-862 MHz — -60 — dBm 25-1000 MHz — -42 — dBm 1-12 GHz — -36 — dBm Spurious emissions out-ofband; per ETSI 300.328 SPURHRM_FCC SPURETSI328 Spurious emissions per ETSI SPURETSI440 EN300.440 Test Condition Note: 1. For 2480 Mhz, a maximum duty cycle of 20% is used to achieve this value. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 25 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.9.4 RF Receiver Characteristics for 1Mbps 2GFSK in the 2.4 GHz Band Unless otherwise indicated T=25C,VREGVDD = AVDD = IOVDD = 3.3 V, DVDD = RFVDD = PAVDD. RFVDD and PAVDD path is filtered using ferrites. Crystal frequency=38.4MHz. RF center frequency 2.440 GHz. Test circuit according to Figure 5.2 EFR32FG1 Typical Application Circuit: Configuration with DC-DC Coverter (PAVDD from VDCDC) on page 48 and Figure 5.4 Typical 2.4 GHz RF impedance-matching network circuits on page 49. Table 4.15. RF Receiver Characteristics for 1Mbps 2GFSK in the 2.4GHz Band Parameter Symbol Test Condition Min Typ Max Unit Max usable receiver input level, 0.1% BER SAT Signal is reference signal1. Packet length is 20 bytes. — 10 — dBm Sensitivity, 0.1% BER SENS Signal is reference signal1. Using DC-DC converter — -94 — dBm Signal to co-channel interfer- C/ICC er, 0.1% BER Desired signal 3 dB above reference sensitivity — 8.3 — dB N+1 adjacent channel (1 C/I1+ MHz) selectivity, 0.1% BER, with allowable exceptions. Desired is reference signal at -67 dBm Interferer is reference signal at +1 MHz offset. Desired frequency 2402 MHz ≤ Fc ≤ 2480 MHz — -3 — dB N-1 adjacent channel (1 C/I1MHz) selectivity, 0.1% BER, with allowable exceptions. Desired is reference signal at -67 dBm Interferer is reference signal at -1 MHz offset. Desired frequency 2402 MHz ≤ Fc ≤ 2480 MHz — -0.5 — dB Alternate (2 MHz) selectivity, C/I2 0.1% BER, with allowable exceptions. Desired is reference signal at -67 dBm Interferer is reference signal at ± 2 MHz offset. Desired frequency 2402 MHz ≤ Fc ≤ 2480 MHz — -43 — dB Alternate (3 MHz) selectivity, C/I3 0.1% BER, with allowable exceptions. Desired is reference signal at -67 dBm Interferer is reference signal at ±3 MHz offset. Desired frequency 2404 MHz ≤ Fc ≤ 2480 MHz — -46.7 — dB Selectivity to image frequen- C/IIM cy, 0.1% BER. Desired is reference signal at -67 dBm Interferer is reference signal at image frequency with 1 MHz precision — -38.7 — dB Selectivity to image frequency +1 MHz, 0.1% BER. Desired is reference signal at -67 dBm Interferer is reference signal at image frequency +1 MHz with 1 MHz precision — -48.2 — dB Interferer frequency 30 MHz ≤ f ≤ 2000 MHz — -27 — dBm Interferer frequency 2003 MHz ≤ f ≤ 2399 MHz — -32 — dBm Interferer frequency 2484 MHz ≤ f ≤ 2997 MHz — -32 — dBm Interferer frequency 3 GHz ≤ f ≤ 12.75 GHz — -27 — dBm C/IIM+1 Blocking, 0.1% BER, Desired BLOCKOOB is reference signal at -67 dBm. Interferer is CW in OOB range. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 26 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications Parameter Min Typ Max Unit Upper limit of input power RSSIMAX range over which RSSI resolution is maintained 4 — — dBm Lower limit of input power RSSIMIN range over which RSSI resolution is maintained — — -101 dBm — — 0.5 dB RSSI resolution Symbol RSSIRES Test Condition Over RSSIMIN to RSSIMAX Note: 1. Reference signal is defined 2GFSK at -67 dBm, Modulation index = 0.5, BT = 0.5, Bit rate = 1 Mbps, desired data = PRBS9; interferer data = PRBS15; frequency accuracy better than 1 ppm silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 27 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.9.5 RF Transmitter Characteristics for 802.15.4 O-QPSK DSSS in the 2.4 GHz Band Unless otherwise indicated T=25 °C,VREGVDD = AVDD = IOVDD = 3.3 V, DVDD = RFVDD = PAVDD. RFVDD and PAVDD path is filtered using ferrites. Crystal frequency=38.4 MHz. RF center frequency 2.45 GHz. Test circuit according to Figure 5.2 EFR32FG1 Typical Application Circuit: Configuration with DC-DC Coverter (PAVDD from VDCDC) on page 48 and Figure 5.4 Typical 2.4 GHz RF impedance-matching network circuits on page 49 Table 4.16. RF Transmitter Characteristics for 802.15.4 DSSS-OQPSK in the 2.4GHz Band Parameter Symbol Test Condition Min Typ Max Unit Error vector magnitude (off- EVM set EVM), per 802.15.4-2011 Average across frequency. Signal is DSSS-OQPSK reference packet1 — 6.1 — % rms Power spectral density limit Relative, at carrier ±3.5 MHz — -26 — dBc Absolute, at carrier ±3.5 MHz2 — -36 — dBm Per FCC part 15.247 — -3.8 — dBm/ 3kHz Output power level which meets 10dBm/MHz ETSI 300.328 specification — 12 — dBm Occupied channel bandwidth OCPETSI328 per ETSI EN300.328 99% BW at highest and lowest channels in band — 2.25 — MHz Emissions of harmonics outof-band, per FCC part 15.247 SPURHRM_FCC 2nd,3rd, 5, 6,8,9,10 harmonics; continuous transmission of modulated carrier — -49.7 — dBm Spurious emissions out-ofband, per FCC part 15.247, excluding harmonics. Restricted Bands SPUROOB_FCC Above 2.483 GHz or below 2.4 GHz; continuous transmission of modulated carrier3 — -47 — dBm Above 2.483 GHz or below 2.4 GHz; continuous transmission of modulated carrier — -35.4 — dBc [2400-BW to 2400], [2483.5 to 2483.5+BW]; — -36.6 — dBm [2400-2BW to 2400-BW], [2483.5+BW to 2483.5+2BW]; per ETSI 300.328 — -41.7 — dBm 47-74 MHz,87.5-108 MHz, 174-230 MHz, 470-862 MHz — -60 — dBm 25-1000 MHz, — -42 — dBm 1G-24G — -36 — dBm PSDLIMIT Spurious emissions out-ofband, per FCC part 15.247, excluding harmonics, Non Restricted Bands Spurious emissions out-ofband; per ETSI 300.3284 SPURETSI328 Spurious emissions per ETSI SPURETSI440 EN300.4404 Note: 1. Reference packet is defined as 20 octet PSDU, modulated according to 802.15.4-2011 DSSS-OQPSK in the 2.4GHz band, with pseudo-random packet data content 2. For 2415 Mhz, a maximum duty cycle of 50% is used to achieve this value. 3. For 2480 Mhz, a maximum duty cycle of 20% is used to achieve this value. 4. Specified at maximum power output level of 10 dBm silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 28 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.9.6 RF Receiver Characteristics for 802.15.4 O-QPSK DSSS in the 2.4 GHz Band Unless otherwise indicated T=25 °C,VREGVDD = AVDD = IOVDD = 3.3 V, DVDD = RFVDD = PAVDD. RFVDD and PAVDD path is filtered using ferrites. Crystal frequency=38.4 MHz. RF center frequency 2.445 GHz. Test circuit according to Figure 5.2 EFR32FG1 Typical Application Circuit: Configuration with DC-DC Coverter (PAVDD from VDCDC) on page 48 and Figure 5.4 Typical 2.4 GHz RF impedance-matching network circuits on page 49 Table 4.17. RF Receiver Characteristics for 801.15.4 DSSS-OQPSK in the 2.4 GHz Band Parameter Symbol Test Condition Min Typ Max Unit Max usable receiver input level, 1% PER SAT Signal is reference signal1. Packet length is 20 octets. — 10 — dBm Sensitivity, 1% PER SENS Signal is reference signal. Packet length is 20 octets. Using DC-DC converter. — -101 — dBm Signal is reference signal. Packet length is 20 octets. Without DCDC converter. — -101 — dBm Co-channel interferer rejection, 1% PER CCR Desired signal 10 dB above sensitivity limit — -2.6 — dB High-side adjacent channel rejection, 1% PER. Desired is reference signal at 3dB above reference sensitivity level2 ACR+1 Interferer is reference signal at +1 channel-spacing. — 33.75 — dB Interferer is filtered reference signal3 at +1 channel-spacing. — 52.2 — dB Interferer is CW at +1 channelspacing.4 — 58.6 — dB Interferer is reference signal at -1 channel-spacing. — 35 — dB Interferer is filtered reference signal3 at -1 channel-spacing. — 54.7 — dB Interferer is CW at -1 channelspacing. — 60.1 — dB Interferer is reference signal at ±2 channel-spacing — 45.9 — dB Interferer is filtered reference signal3 at ±2 channel-spacing — 56.8 — dB Interferer is CW at ±2 channelspacing — 65.5 — dB Image rejection , 1% PER, IR Desired is reference signal at 3dB above reference sensitivity level2 Interferer is CW in image band4 — 49.3 — dB Blocking rejection of all other BLOCK channels. 1% PER, Desired is reference signal at 3dB above reference sensitivity level2. Interferer is reference signal. Interferer frequency < Desired frequency - 3 channel-spacing — 57.2 — dB Interferer frequency > Desired frequency + 3 channel-spacing — 57.9 — dB Blocking rejection of 802.11g BLOCK80211G signal centered at +12MHz or -13MHz Desired is reference signal at 6dB above reference sensitivity level2 — 51.6 — dB Low-side adjacent channel rejection, 1% PER. Desired is reference signal at 3dB above reference sensitivity level2 Alternate channel rejection, 1% PER. Desired is reference signal at 3dB above reference sensitivity level2 ACR-1 ACR2 silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 29 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications Parameter Symbol Min Typ Max Unit Upper limit of input power RSSIMAX range over which RSSI resolution is maintained 5 — — dBm Lower limit of input power RSSIMIN range over which RSSI resolution is maintained — — -98 dBm — 0.25 — dB — 0.5 — dB RSSI resolution RSSIRES RSSI linearity as defined by 802.15.4-2003 RSSILIN Test Condition over RSSIMIN to RSSIMAX Note: 1. Reference signal is defined as O-QPSK DSSS per 802.15.4, Frequency range = 2400-2483.5 MHz, Symbol rate = 62.5 ksymbols/s 2. Reference sensitivity level is -85 dBm 3. Filter is characterized as a symmetric bandpass centered on the adjacent channel having a 3dB bandwidth of 4.6 MHz and stopband rejection better than 26 dB beyond 3.15 MHz from the adjacent carrier. 4. Due to low-IF frequency, there is some overlap of adjacent channel and image channel bands. Adjacent channel CW blocker tests place the Interferer center frequency at the Desired frequency ±5 MHz on the channel raster, whereas the image rejection test places the CW interferer near the image frequency of the Desired signal carrier, regardless of the channel raster. 4.1.10 Modem Features Table 4.18. Modem Features Parameter Symbol Test Condition Min Typ Max Unit Receive Bandwidth RXBandwidth Configurable range with 38.4 MHz crystal 0.1 — 2530 kHz IF Frequency IFFreq Configurable range with 38.4 MHz crystal. Selected steps available. 150 — 1371 kHz silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 30 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.11 Oscillators 4.1.11.1 LFXO Table 4.19. LFXO Parameter Symbol Crystal frequency Test Condition Min Typ Max Unit fLFXO — 32.768 — kHz Supported crystal equivalent series resistance (ESR) ESRLFXO — — 70 kΩ Supported range of crystal load capacitance 1 CLFXO_CL 6 — 18 pF On-chip tuning cap range 2 CLFXO_T 8 — 40 pF On-chip tuning cap step size SSLFXO — 0.25 — pF Current consumption after startup 3 ILFXO ESR = 30 kΩ, CL=12.5 pF, GAIN4 = 3, AGC4 = 1 — 273 — nA Start- up time tLFXO ESR=30 kΩ, CL=12.5 pF, GAIN4 =2 — 308 — ms On each of LFXTAL_N and LFXTAL_P pins Note: 1. Total load capacitance as seen by the crystal 2. The effective load capacitance seen by the crystal will be CLFXO_T /2. This is because each XTAL pin has a tuning cap and the two caps will be seen in series by the crystal. 3. Block is supplied by AVDD if ANASW = 0, or DVDD if ANASW=1 in EMU_PWRCTRL register 4. In CMU_LFXOCTRL register silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 31 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.11.2 HFXO Table 4.20. HFXO Parameter Symbol Crystal Frequency fHFXO Supported crystal equivalent series resistance (ESR) ESRHFXO Supported range of crystal load capacitance 1 CHFXO_CL On-chip tuning cap range 2 CHFXO_T On-chip tuning capacitance step SSHFXO Startup time tHFXO Frequency Tolerance for the crystal FTHFXO Test Condition Min Typ Max Unit 38 38.4 40 MHz — — 60 Ω 6 — 12 pF 9 20 25 pF — 0.04 — pF 38.4 MHz: ESR=50 Ω, CL = 10 pF, BOOST3 = 2 — 300 — μs 38.4 MHz, ESR = 50 Ω, CL = 10 pF -40 — 40 ppm Crystal frequency 38.4 MHz On each of HFXTAL_N and HFXTAL_P pins Note: 1. Total load capacitance as seen by the crystal 2. The effective load capacitance seen by the crystal will be CHFXO_T /2. This is because each XTAL pin has a tuning cap and the two caps will be seen in series by the crystal. 3. In CMU_HFXOCTRL register 4.1.11.3 LFRCO Table 4.21. LFRCO Parameter Symbol Test Condition Min Typ Max Unit Oscillation frequency fLFRCO ENVREF = 1 in CMU_LFRCOCTRL TBD 32.768 TBD kHz ENVREF = 0 in CMU_LFRCOCTRL TBD 32.768 TBD kHz — 500 — μs ENVREF = 1 in CMU_LFRCOCTRL — 342 — nA ENVREF = 0 in CMU_LFRCOCTRL — 494 — nA Startup time tLFRCO Current consumption 1 ILFRCO Note: 1. Block is supplied by AVDD if ANASW = 0, or DVDD if ANASW=1 in EMU_PWRCTRL register silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 32 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications 4.1.11.4 HFRCO and AUXHFRCO Table 4.22. HFRCO and AUXHFRCO Parameter Symbol Test Condition Min Typ Max Unit Oscillation frequency fHFRCO 38 MHz frequency band TBD 38 TBD MHz 32 MHz frequency band TBD 32 TBD MHz 26 MHz frequency band TBD 26 TBD MHz 19 MHz frequency band TBD 19 TBD MHz 16 MHz frequency band TBD 16 TBD MHz 13 MHz frequency band TBD 13 TBD MHz 7 MHz frequency band TBD 7 TBD MHz 4 MHz frequency band TBD 4 TBD MHz 2 MHz frequency band TBD 2 TBD MHz 1 MHz frequency band TBD 1 TBD MHz fHFRCO ≥ 19 MHz — 300 — ns 4 < fHFRCO < 19 MHz — 1 — μs fHFRCO ≤ 4 MHz — 2.5 — μs fHFRCO = 38 MHz — 43 — μA fHFRCO = 32 MHz — 37 — μA fHFRCO = 26 MHz — 31 — μA fHFRCO = 19 MHz — 25 TBD μA fHFRCO = 16 MHz — 22 — μA fHFRCO = 13 MHz — 19 — μA fHFRCO = 7 MHz — 12 — μA fHFRCO = 4 MHz — 10 — μA fHFRCO = 2 MHz — 8 — μA fHFRCO = 1 MHz — 7 — μA fHFRCO = 38 MHz — 161 — μA fHFRCO = 32 MHz — 134 — μA fHFRCO = 26 MHz — 116 — μA fHFRCO = 19 MHz — 101 TBD μA fHFRCO = 16 MHz — 88 — μA fHFRCO = 13 MHz — 81 — μA fHFRCO = 7 MHz — 69 — μA fHFRCO = 4 MHz — 23 — μA fHFRCO = 2 MHz — 23 — μA fHFRCO = 1 MHz — 23 — μA Start-up time Current consumption on DVDD Current consumption on AVDD 1 tHFRCO IHFRCODIG IHFRCOANA silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 33 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Electrical Specifications Parameter Symbol Test Condition Step size SSHFRCO Period Jitter Min Typ Max Unit Coarse (% of period) — 0.8 — % Fine (% of period) — 0.1 — % — 0.2 — % RMS Min Typ Max Unit TBD 1 TBD kHz Min Typ Max Unit 10000 — — cycles 10 — — years PJHFRCO Note: 1. Current consumption on DVDD instead if ANASW=1 in EMU_PWRCTRL register 4.1.11.5 ULFRCO Table 4.23. ULFRCO Parameter Symbol Oscillation frequency fULFRCO Test Condition 4.1.12 Flash Memory Characteristics Table 4.24. Flash Memory Characteristics1 Parameter Symbol Flash erase cycles before failure ECFLASH Flash data retention RETFLASH Word (32-bit) programming time tW_PROG 20 26 40 μs Page erase time tPERASE 20 27 40 ms Mass erase time tMERASE 20 27 40 ms Device erase time2 tDERASE — 60 TBD ms Page erase current3 IERASE — — 3 mA — — 5 mA — — 3 mA Mass or Device erase current3 Write current3 IWRITE Test Condition TAMB 13dBm). 4-Element Match for 2.4GHz Band 2-Element Match for 2.4GHz Band PAVDD PAVDD PAVDD 2G4RF_IOP 2G4RF_ION PAVDD L0 50Ω C0 L0 L1 50Ω 2G4RF_IOP 2G4RF_ION C0 C1 Figure 5.4. Typical 2.4 GHz RF impedance-matching network circuits 5.3 Other Connections Other components or connections may be required to meet the system-level requirements. Application Note AN0002: "Hardware Design Considerations" contains detailed information on these connections. Application Notes can be accessed on the Silicon Labs website (www.silabs.com/32bit-appnotes). silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 49 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions 6. Pin Definitions 6.1 EFR32FG1 QFN48 2.4 GHz Definition Figure 6.1. EFR32FG1 QFN48 2.4 GHz Pinout silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 50 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions Table 6.1. Device Pinout QFN48 Pin# and Name Pin # Pin Name 0 VSS 1 2 3 PF0 PF1 PF2 Pin Alternate Functionality / Description Analog Timers Communication Radio Other TIM0_CC0 #24 TIM0_CC1 #23 TIM0_CC2 #22 TIM0_CDTI0 #21 TIM0_CDTI1 #20 TIM0_CDTI2 #19 TIM1_CC0 #24 TIM1_CC1 #23 TIM1_CC2 #22 TIM1_CC3 #21 LETIM0_OUT0 #24 LETIM0_OUT1 #23 PCNT0_S0IN #24 PCNT0_S1IN #23 US0_TX #24 US0_RX #23 US0_CLK #22 US0_CS #21 US0_CTS #20 US0_RTS #19 US1_TX #24 US1_RX #23 US1_CLK #22 US1_CS #21 US1_CTS #20 US1_RTS #19 LEU0_TX #24 LEU0_RX #23 I2C0_SDA #24 I2C0_SCL #23 FRC_DCLK #24 FRC_DOUT #23 FRC_DFRAME #22 MODEM_DCLK #24 MODEM_DIN #23 MODEM_DOUT #22 MODEM_ANT0 #21 MODEM_ANT1 #20 PRS_CH0 #0 PRS_CH1 #7 PRS_CH2 #6 PRS_CH3 #5 ACMP0_O #24 ACMP1_O #24 DBG_SWCLKTCK #0 TIM0_CC0 #25 TIM0_CC1 #24 TIM0_CC2 #23 TIM0_CDTI0 #22 TIM0_CDTI1 #21 TIM0_CDTI2 #20 TIM1_CC0 #25 TIM1_CC1 #24 TIM1_CC2 #23 TIM1_CC3 #22 LETIM0_OUT0 #25 LETIM0_OUT1 #24 PCNT0_S0IN #25 PCNT0_S1IN #24 US0_TX #25 US0_RX #24 US0_CLK #23 US0_CS #22 US0_CTS #21 US0_RTS #20 US1_TX #25 US1_RX #24 US1_CLK #23 US1_CS #22 US1_CTS #21 US1_RTS #20 LEU0_TX #25 LEU0_RX #24 I2C0_SDA #25 I2C0_SCL #24 FRC_DCLK #25 FRC_DOUT #24 FRC_DFRAME #23 MODEM_DCLK #25 MODEM_DIN #24 MODEM_DOUT #23 MODEM_ANT0 #22 MODEM_ANT1 #21 PRS_CH0 #1 PRS_CH1 #0 PRS_CH2 #7 PRS_CH3 #6 ACMP0_O #25 ACMP1_O #25 DBG_SWDIOTMS #0 TIM0_CC0 #26 TIM0_CC1 #25 TIM0_CC2 #24 TIM0_CDTI0 #23 TIM0_CDTI1 #22 TIM0_CDTI2 #21 TIM1_CC0 #26 TIM1_CC1 #25 TIM1_CC2 #24 TIM1_CC3 #23 LETIM0_OUT0 #26 LETIM0_OUT1 #25 PCNT0_S0IN #26 PCNT0_S1IN #25 US0_TX #26 US0_RX #25 US0_CLK #24 US0_CS #23 US0_CTS #22 US0_RTS #21 US1_TX #26 US1_RX #25 US1_CLK #24 US1_CS #23 US1_CTS #22 US1_RTS #21 LEU0_TX #26 LEU0_RX #25 I2C0_SDA #26 I2C0_SCL #25 FRC_DCLK #26 FRC_DOUT #25 FRC_DFRAME #24 MODEM_DCLK #26 MODEM_DIN #25 MODEM_DOUT #24 MODEM_ANT0 #23 MODEM_ANT1 #22 CMU_CLK0 #6 PRS_CH0 #2 PRS_CH1 #1 PRS_CH2 #0 PRS_CH3 #7 ACMP0_O #26 ACMP1_O #26 DBG_TDO #0 DBG_SWO #0 GPIO_EM4WU0 Ground BUSAX [ADC0: APORT1XCH16 ACMP0: APORT1XCH16 ACMP1: APORT1XCH16] BUSBY [ADC0: APORT2YCH16 ACMP0: APORT2YCH16 ACMP1: APORT2YCH16] BUSAY [ADC0: APORT1YCH17 ACMP0: APORT1YCH17 ACMP1: APORT1YCH17] BUSBX [ADC0: APORT2XCH17 ACMP0: APORT2XCH17 ACMP1: APORT2XCH17] BUSAX [ADC0: APORT1XCH18 ACMP0: APORT1XCH18 ACMP1: APORT1XCH18] BUSBY [ADC0: APORT2YCH18 ACMP0: APORT2YCH18 ACMP1: APORT2YCH18] silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 51 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions QFN48 Pin# and Name Pin # 4 5 6 Pin Name PF3 PF4 PF5 Pin Alternate Functionality / Description Analog BUSAY [ADC0: APORT1YCH19 ACMP0: APORT1YCH19 ACMP1: APORT1YCH19] BUSBX [ADC0: APORT2XCH19 ACMP0: APORT2XCH19 ACMP1: APORT2XCH19] BUSAX [ADC0: APORT1XCH20 ACMP0: APORT1XCH20 ACMP1: APORT1XCH20] BUSBY [ADC0: APORT2YCH20 ACMP0: APORT2YCH20 ACMP1: APORT2YCH20] BUSAY [ADC0: APORT1YCH21 ACMP0: APORT1YCH21 ACMP1: APORT1YCH21] BUSBX [ADC0: APORT2XCH21 ACMP0: APORT2XCH21 ACMP1: APORT2XCH21] silabs.com | Smart. Connected. Energy-friendly. Timers Communication Radio Other TIM0_CC0 #27 TIM0_CC1 #26 TIM0_CC2 #25 TIM0_CDTI0 #24 TIM0_CDTI1 #23 TIM0_CDTI2 #22 TIM1_CC0 #27 TIM1_CC1 #26 TIM1_CC2 #25 TIM1_CC3 #24 LETIM0_OUT0 #27 LETIM0_OUT1 #26 PCNT0_S0IN #27 PCNT0_S1IN #26 US0_TX #27 US0_RX #26 US0_CLK #25 US0_CS #24 US0_CTS #23 US0_RTS #22 US1_TX #27 US1_RX #26 US1_CLK #25 US1_CS #24 US1_CTS #23 US1_RTS #22 LEU0_TX #27 LEU0_RX #26 I2C0_SDA #27 I2C0_SCL #26 FRC_DCLK #27 FRC_DOUT #26 FRC_DFRAME #25 MODEM_DCLK #27 MODEM_DIN #26 MODEM_DOUT #25 MODEM_ANT0 #24 MODEM_ANT1 #23 CMU_CLK1 #6 PRS_CH0 #3 PRS_CH1 #2 PRS_CH2 #1 PRS_CH3 #0 ACMP0_O #27 ACMP1_O #27 DBG_TDI #0 TIM0_CC0 #28 TIM0_CC1 #27 TIM0_CC2 #26 TIM0_CDTI0 #25 TIM0_CDTI1 #24 TIM0_CDTI2 #23 TIM1_CC0 #28 TIM1_CC1 #27 TIM1_CC2 #26 TIM1_CC3 #25 LETIM0_OUT0 #28 LETIM0_OUT1 #27 PCNT0_S0IN #28 PCNT0_S1IN #27 US0_TX #28 US0_RX #27 US0_CLK #26 US0_CS #25 US0_CTS #24 US0_RTS #23 US1_TX #28 US1_RX #27 US1_CLK #26 US1_CS #25 US1_CTS #24 US1_RTS #23 LEU0_TX #28 LEU0_RX #27 I2C0_SDA #28 I2C0_SCL #27 FRC_DCLK #28 FRC_DOUT #27 FRC_DFRAME #26 MODEM_DCLK #28 MODEM_DIN #27 MODEM_DOUT #26 MODEM_ANT0 #25 MODEM_ANT1 #24 PRS_CH0 #4 PRS_CH1 #3 PRS_CH2 #2 PRS_CH3 #1 ACMP0_O #28 ACMP1_O #28 TIM0_CC0 #29 TIM0_CC1 #28 TIM0_CC2 #27 TIM0_CDTI0 #26 TIM0_CDTI1 #25 TIM0_CDTI2 #24 TIM1_CC0 #29 TIM1_CC1 #28 TIM1_CC2 #27 TIM1_CC3 #26 LETIM0_OUT0 #29 LETIM0_OUT1 #28 PCNT0_S0IN #29 PCNT0_S1IN #28 US0_TX #29 US0_RX #28 US0_CLK #27 US0_CS #26 US0_CTS #25 US0_RTS #24 US1_TX #29 US1_RX #28 US1_CLK #27 US1_CS #26 US1_CTS #25 US1_RTS #24 LEU0_TX #29 LEU0_RX #28 I2C0_SDA #29 I2C0_SCL #28 FRC_DCLK #29 FRC_DOUT #28 FRC_DFRAME #27 MODEM_DCLK #29 MODEM_DIN #28 MODEM_DOUT #27 MODEM_ANT0 #26 MODEM_ANT1 #25 PRS_CH0 #5 PRS_CH1 #4 PRS_CH2 #3 PRS_CH3 #2 ACMP0_O #29 ACMP1_O #29 Preliminary Rev. 0.9 | 52 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions QFN48 Pin# and Name Pin # 7 Pin Name PF6 Pin Alternate Functionality / Description Analog BUSAX [ADC0: APORT1XCH22 ACMP0: APORT1XCH22 ACMP1: APORT1XCH22] BUSBY [ADC0: APORT2YCH22 ACMP0: APORT2YCH22 ACMP1: APORT2YCH22] BUSAY [ADC0: APORT1YCH23 ACMP0: APORT1YCH23 ACMP1: APORT1YCH23] Timers Communication Radio Other TIM0_CC0 #30 TIM0_CC1 #29 TIM0_CC2 #28 TIM0_CDTI0 #27 TIM0_CDTI1 #26 TIM0_CDTI2 #25 TIM1_CC0 #30 TIM1_CC1 #29 TIM1_CC2 #28 TIM1_CC3 #27 LETIM0_OUT0 #30 LETIM0_OUT1 #29 PCNT0_S0IN #30 PCNT0_S1IN #29 US0_TX #30 US0_RX #29 US0_CLK #28 US0_CS #27 US0_CTS #26 US0_RTS #25 US1_TX #30 US1_RX #29 US1_CLK #28 US1_CS #27 US1_CTS #26 US1_RTS #25 LEU0_TX #30 LEU0_RX #29 I2C0_SDA #30 I2C0_SCL #29 FRC_DCLK #30 FRC_DOUT #29 FRC_DFRAME #28 MODEM_DCLK #30 MODEM_DIN #29 MODEM_DOUT #28 MODEM_ANT0 #27 MODEM_ANT1 #26 CMU_CLK1 #7 PRS_CH0 #6 PRS_CH1 #5 PRS_CH2 #4 PRS_CH3 #3 ACMP0_O #30 ACMP1_O #30 TIM0_CC0 #31 TIM0_CC1 #30 TIM0_CC2 #29 TIM0_CDTI0 #28 TIM0_CDTI1 #27 TIM0_CDTI2 #26 TIM1_CC0 #31 TIM1_CC1 #30 TIM1_CC2 #29 TIM1_CC3 #28 LETIM0_OUT0 #31 LETIM0_OUT1 #30 PCNT0_S0IN #31 PCNT0_S1IN #30 US0_TX #31 US0_RX #30 US0_CLK #29 US0_CS #28 US0_CTS #27 US0_RTS #26 US1_TX #31 US1_RX #30 US1_CLK #29 US1_CS #28 US1_CTS #27 US1_RTS #26 LEU0_TX #31 LEU0_RX #30 I2C0_SDA #31 I2C0_SCL #30 FRC_DCLK #31 FRC_DOUT #30 FRC_DFRAME #29 MODEM_DCLK #31 MODEM_DIN #30 MODEM_DOUT #29 MODEM_ANT0 #28 MODEM_ANT1 #27 CMU_CLK0 #7 PRS_CH0 #7 PRS_CH1 #6 PRS_CH2 #5 PRS_CH3 #4 ACMP0_O #31 ACMP1_O #31 GPIO_EM4WU1 8 PF7 9 RFVDD 10 HFXTAL_N High Frequency Crystal input pin. 11 HFXTAL_P High Frequency Crystal output pin. 12 RESETn 13 NC 14 RFVSS Radio Ground 15 PAVSS Power Amplifier (PA) voltage regulator VSS 16 2G4RF_ION 2.4 GHz Differential RF input/output, negative path. 17 2G4RF_IOP 2.4 GHz Differential RF input/output, positive path. 18 PAVDD Power Amplifier (PA) voltage regulator VDD input BUSBX [ADC0: APORT2XCH23 ACMP0: APORT2XCH23 ACMP1: APORT2XCH23] Radio power supply Reset input, active low.To apply an external reset source to this pin, it is required to only drive this pin low during reset, and let the internal pull-up ensure that reset is released. No Connect. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 53 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions QFN48 Pin# and Name Pin # 19 Pin Alternate Functionality / Description Pin Name Analog Timers Communication Radio Other PD10 BUSCX [ADC0: APORT3XCH2 ACMP0: APORT3XCH2 ACMP1: APORT3XCH2 IDAC0: APORT1XCH2] TIM0_CC0 #18 TIM0_CC1 #17 TIM0_CC2 #16 TIM0_CDTI0 #15 TIM0_CDTI1 #14 TIM0_CDTI2 #13 TIM1_CC0 #18 TIM1_CC1 #17 TIM1_CC2 #16 TIM1_CC3 #15 LETIM0_OUT0 #18 LETIM0_OUT1 #17 PCNT0_S0IN #18 PCNT0_S1IN #17 US0_TX #18 US0_RX #17 US0_CLK #16 US0_CS #15 US0_CTS #14 US0_RTS #13 US1_TX #18 US1_RX #17 US1_CLK #16 US1_CS #15 US1_CTS #14 US1_RTS #13 LEU0_TX #18 LEU0_RX #17 I2C0_SDA #18 I2C0_SCL #17 FRC_DCLK #18 FRC_DOUT #17 FRC_DFRAME #16 MODEM_DCLK #18 MODEM_DIN #17 MODEM_DOUT #16 MODEM_ANT0 #15 MODEM_ANT1 #14 CMU_CLK1 #4 PRS_CH3 #9 PRS_CH4 #1 PRS_CH5 #0 PRS_CH6 #12 ACMP0_O #18 ACMP1_O #18 TIM0_CC0 #19 TIM0_CC1 #18 TIM0_CC2 #17 TIM0_CDTI0 #16 TIM0_CDTI1 #15 TIM0_CDTI2 #14 TIM1_CC0 #19 TIM1_CC1 #18 TIM1_CC2 #17 TIM1_CC3 #16 LETIM0_OUT0 #19 LETIM0_OUT1 #18 PCNT0_S0IN #19 PCNT0_S1IN #18 US0_TX #19 US0_RX #18 US0_CLK #17 US0_CS #16 US0_CTS #15 US0_RTS #14 US1_TX #19 US1_RX #18 US1_CLK #17 US1_CS #16 US1_CTS #15 US1_RTS #14 LEU0_TX #19 LEU0_RX #18 I2C0_SDA #19 I2C0_SCL #18 FRC_DCLK #19 FRC_DOUT #18 FRC_DFRAME #17 MODEM_DCLK #19 MODEM_DIN #18 MODEM_DOUT #17 MODEM_ANT0 #16 MODEM_ANT1 #15 PRS_CH3 #10 PRS_CH4 #2 PRS_CH5 #1 PRS_CH6 #13 ACMP0_O #19 ACMP1_O #19 TIM0_CC0 #20 TIM0_CC1 #19 TIM0_CC2 #18 TIM0_CDTI0 #17 TIM0_CDTI1 #16 TIM0_CDTI2 #15 TIM1_CC0 #20 TIM1_CC1 #19 TIM1_CC2 #18 TIM1_CC3 #17 LETIM0_OUT0 #20 LETIM0_OUT1 #19 PCNT0_S0IN #20 PCNT0_S1IN #19 US0_TX #20 US0_RX #19 US0_CLK #18 US0_CS #17 US0_CTS #16 US0_RTS #15 US1_TX #20 US1_RX #19 US1_CLK #18 US1_CS #17 US1_CTS #16 US1_RTS #15 LEU0_TX #20 LEU0_RX #19 I2C0_SDA #20 I2C0_SCL #19 FRC_DCLK #20 FRC_DOUT #19 FRC_DFRAME #18 MODEM_DCLK #20 MODEM_DIN #19 MODEM_DOUT #18 MODEM_ANT0 #17 MODEM_ANT1 #16 PRS_CH3 #11 PRS_CH4 #3 PRS_CH5 #2 PRS_CH6 #14 ACMP0_O #20 ACMP1_O #20 BUSDY [ADC0: APORT4YCH2 ACMP0: APORT4YCH2 ACMP1: APORT4YCH2] 20 PD11 BUSCY [ADC0: APORT3YCH3 ACMP0: APORT3YCH3 ACMP1: APORT3YCH3 IDAC0: APORT1YCH3] BUSDX [ADC0: APORT4XCH3 ACMP0: APORT4XCH3 ACMP1: APORT4XCH3] 21 PD12 BUSCX [ADC0: APORT3XCH4 ACMP0: APORT3XCH4 ACMP1: APORT3XCH4 IDAC0: APORT1XCH4] BUSDY [ADC0: APORT4YCH4 ACMP0: APORT4YCH4 ACMP1: APORT4YCH4] silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 54 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions QFN48 Pin# and Name Pin # 22 Pin Alternate Functionality / Description Pin Name Analog Timers Communication Radio Other PD13 BUSCY [ADC0: APORT3YCH5 ACMP0: APORT3YCH5 ACMP1: APORT3YCH5 IDAC0: APORT1YCH5] TIM0_CC0 #21 TIM0_CC1 #20 TIM0_CC2 #19 TIM0_CDTI0 #18 TIM0_CDTI1 #17 TIM0_CDTI2 #16 TIM1_CC0 #21 TIM1_CC1 #20 TIM1_CC2 #19 TIM1_CC3 #18 LETIM0_OUT0 #21 LETIM0_OUT1 #20 PCNT0_S0IN #21 PCNT0_S1IN #20 US0_TX #21 US0_RX #20 US0_CLK #19 US0_CS #18 US0_CTS #17 US0_RTS #16 US1_TX #21 US1_RX #20 US1_CLK #19 US1_CS #18 US1_CTS #17 US1_RTS #16 LEU0_TX #21 LEU0_RX #20 I2C0_SDA #21 I2C0_SCL #20 FRC_DCLK #21 FRC_DOUT #20 FRC_DFRAME #19 MODEM_DCLK #21 MODEM_DIN #20 MODEM_DOUT #19 MODEM_ANT0 #18 MODEM_ANT1 #17 PRS_CH3 #12 PRS_CH4 #4 PRS_CH5 #3 PRS_CH6 #15 ACMP0_O #21 ACMP1_O #21 TIM0_CC0 #22 TIM0_CC1 #21 TIM0_CC2 #20 TIM0_CDTI0 #19 TIM0_CDTI1 #18 TIM0_CDTI2 #17 TIM1_CC0 #22 TIM1_CC1 #21 TIM1_CC2 #20 TIM1_CC3 #19 LETIM0_OUT0 #22 LETIM0_OUT1 #21 PCNT0_S0IN #22 PCNT0_S1IN #21 US0_TX #22 US0_RX #21 US0_CLK #20 US0_CS #19 US0_CTS #18 US0_RTS #17 US1_TX #22 US1_RX #21 US1_CLK #20 US1_CS #19 US1_CTS #18 US1_RTS #17 LEU0_TX #22 LEU0_RX #21 I2C0_SDA #22 I2C0_SCL #21 FRC_DCLK #22 FRC_DOUT #21 FRC_DFRAME #20 MODEM_DCLK #22 MODEM_DIN #21 MODEM_DOUT #20 MODEM_ANT0 #19 MODEM_ANT1 #18 CMU_CLK0 #5 PRS_CH3 #13 PRS_CH4 #5 PRS_CH5 #4 PRS_CH6 #16 ACMP0_O #22 ACMP1_O #22 GPIO_EM4WU4 TIM0_CC0 #23 TIM0_CC1 #22 TIM0_CC2 #21 TIM0_CDTI0 #20 TIM0_CDTI1 #19 TIM0_CDTI2 #18 TIM1_CC0 #23 TIM1_CC1 #22 TIM1_CC2 #21 TIM1_CC3 #20 LETIM0_OUT0 #23 LETIM0_OUT1 #22 PCNT0_S0IN #23 PCNT0_S1IN #22 US0_TX #23 US0_RX #22 US0_CLK #21 US0_CS #20 US0_CTS #19 US0_RTS #18 US1_TX #23 US1_RX #22 US1_CLK #21 US1_CS #20 US1_CTS #19 US1_RTS #18 LEU0_TX #23 LEU0_RX #22 I2C0_SDA #23 I2C0_SCL #22 FRC_DCLK #23 FRC_DOUT #22 FRC_DFRAME #21 MODEM_DCLK #23 MODEM_DIN #22 MODEM_DOUT #21 MODEM_ANT0 #20 MODEM_ANT1 #19 CMU_CLK1 #5 PRS_CH3 #14 PRS_CH4 #6 PRS_CH5 #5 PRS_CH6 #17 ACMP0_O #23 ACMP1_O #23 DBG_SWO #2 BUSDX [ADC0: APORT4XCH5 ACMP0: APORT4XCH5 ACMP1: APORT4XCH5] 23 PD14 BUSCX [ADC0: APORT3XCH6 ACMP0: APORT3XCH6 ACMP1: APORT3XCH6 IDAC0: APORT1XCH6] BUSDY [ADC0: APORT4YCH6 ACMP0: APORT4YCH6 ACMP1: APORT4YCH6] 24 PD15 BUSCY [ADC0: APORT3YCH7 ACMP0: APORT3YCH7 ACMP1: APORT3YCH7 IDAC0: APORT1YCH7] BUSDX [ADC0: APORT4XCH7 ACMP0: APORT4XCH7 ACMP1: APORT4XCH7] silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 55 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions QFN48 Pin# and Name Pin # Pin Name Pin Alternate Functionality / Description Analog Timers Communication Radio Other TIM0_CC0 #0 TIM0_CC1 #31 TIM0_CC2 #30 TIM0_CDTI0 #29 TIM0_CDTI1 #28 TIM0_CDTI2 #27 TIM1_CC0 #0 TIM1_CC1 #31 TIM1_CC2 #30 TIM1_CC3 #29 LETIM0_OUT0 #0 LETIM0_OUT1 #31 PCNT0_S0IN #0 PCNT0_S1IN #31 US0_TX #0 US0_RX #31 US0_CLK #30 US0_CS #29 US0_CTS #28 US0_RTS #27 US1_TX #0 US1_RX #31 US1_CLK #30 US1_CS #29 US1_CTS #28 US1_RTS #27 LEU0_TX #0 LEU0_RX #31 I2C0_SDA #0 I2C0_SCL #31 FRC_DCLK #0 FRC_DOUT #31 FRC_DFRAME #30 MODEM_DCLK #0 MODEM_DIN #31 MODEM_DOUT #30 MODEM_ANT0 #29 MODEM_ANT1 #28 CMU_CLK1 #0 PRS_CH6 #0 PRS_CH7 #10 PRS_CH8 #9 PRS_CH9 #8 ACMP0_O #0 ACMP1_O #0 TIM0_CC0 #1 TIM0_CC1 #0 TIM0_CC2 #31 TIM0_CDTI0 #30 TIM0_CDTI1 #29 TIM0_CDTI2 #28 TIM1_CC0 #1 TIM1_CC1 #0 TIM1_CC2 #31 TIM1_CC3 #30 LETIM0_OUT0 #1 LETIM0_OUT1 #0 PCNT0_S0IN #1 PCNT0_S1IN #0 US0_TX #1 US0_RX #0 US0_CLK #31 US0_CS #30 US0_CTS #29 US0_RTS #28 US1_TX #1 US1_RX #0 US1_CLK #31 US1_CS #30 US1_CTS #29 US1_RTS #28 LEU0_TX #1 LEU0_RX #0 I2C0_SDA #1 I2C0_SCL #0 FRC_DCLK #1 FRC_DOUT #0 FRC_DFRAME #31 MODEM_DCLK #1 MODEM_DIN #0 MODEM_DOUT #31 MODEM_ANT0 #30 MODEM_ANT1 #29 CMU_CLK0 #0 PRS_CH6 #1 PRS_CH7 #0 PRS_CH8 #10 PRS_CH9 #9 ACMP0_O #1 ACMP1_O #1 TIM0_CC0 #2 TIM0_CC1 #1 TIM0_CC2 #0 TIM0_CDTI0 #31 TIM0_CDTI1 #30 TIM0_CDTI2 #29 TIM1_CC0 #2 TIM1_CC1 #1 TIM1_CC2 #0 TIM1_CC3 #31 LETIM0_OUT0 #2 LETIM0_OUT1 #1 PCNT0_S0IN #2 PCNT0_S1IN #1 US0_TX #2 US0_RX #1 US0_CLK #0 US0_CS #31 US0_CTS #30 US0_RTS #29 US1_TX #2 US1_RX #1 US1_CLK #0 US1_CS #31 US1_CTS #30 US1_RTS #29 LEU0_TX #2 LEU0_RX #1 I2C0_SDA #2 I2C0_SCL #1 FRC_DCLK #2 FRC_DOUT #1 FRC_DFRAME #0 MODEM_DCLK #2 MODEM_DIN #1 MODEM_DOUT #0 MODEM_ANT0 #31 MODEM_ANT1 #30 PRS_CH6 #2 PRS_CH7 #1 PRS_CH8 #0 PRS_CH9 #10 ACMP0_O #2 ACMP1_O #2 ADC0_EXTN 25 PA0 BUSCX [ADC0: APORT3XCH8 ACMP0: APORT3XCH8 ACMP1: APORT3XCH8 IDAC0: APORT1XCH8] BUSDY [ADC0: APORT4YCH8 ACMP0: APORT4YCH8 ACMP1: APORT4YCH8] ADC0_EXTP 26 PA1 BUSCY [ADC0: APORT3YCH9 ACMP0: APORT3YCH9 ACMP1: APORT3YCH9 IDAC0: APORT1YCH9] BUSDX [ADC0: APORT4XCH9 ACMP0: APORT4XCH9 ACMP1: APORT4XCH9] 27 PA2 BUSCX [ADC0: APORT3XCH10 ACMP0: APORT3XCH10 ACMP1: APORT3XCH10 IDAC0: APORT1XCH10] BUSDY [ADC0: APORT4YCH10 ACMP0: APORT4YCH10 ACMP1: APORT4YCH10] silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 56 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions QFN48 Pin# and Name Pin # 28 Pin Alternate Functionality / Description Pin Name Analog Timers Communication Radio Other PA3 BUSCY [ADC0: APORT3YCH11 ACMP0: APORT3YCH11 ACMP1: APORT3YCH11 IDAC0: APORT1YCH11] TIM0_CC0 #3 TIM0_CC1 #2 TIM0_CC2 #1 TIM0_CDTI0 #0 TIM0_CDTI1 #31 TIM0_CDTI2 #30 TIM1_CC0 #3 TIM1_CC1 #2 TIM1_CC2 #1 TIM1_CC3 #0 LETIM0_OUT0 #3 LETIM0_OUT1 #2 PCNT0_S0IN #3 PCNT0_S1IN #2 US0_TX #3 US0_RX #2 US0_CLK #1 US0_CS #0 US0_CTS #31 US0_RTS #30 US1_TX #3 US1_RX #2 US1_CLK #1 US1_CS #0 US1_CTS #31 US1_RTS #30 LEU0_TX #3 LEU0_RX #2 I2C0_SDA #3 I2C0_SCL #2 FRC_DCLK #3 FRC_DOUT #2 FRC_DFRAME #1 MODEM_DCLK #3 MODEM_DIN #2 MODEM_DOUT #1 MODEM_ANT0 #0 MODEM_ANT1 #31 PRS_CH6 #3 PRS_CH7 #2 PRS_CH8 #1 PRS_CH9 #0 ACMP0_O #3 ACMP1_O #3 GPIO_EM4WU8 TIM0_CC0 #4 TIM0_CC1 #3 TIM0_CC2 #2 TIM0_CDTI0 #1 TIM0_CDTI1 #0 TIM0_CDTI2 #31 TIM1_CC0 #4 TIM1_CC1 #3 TIM1_CC2 #2 TIM1_CC3 #1 LETIM0_OUT0 #4 LETIM0_OUT1 #3 PCNT0_S0IN #4 PCNT0_S1IN #3 US0_TX #4 US0_RX #3 US0_CLK #2 US0_CS #1 US0_CTS #0 US0_RTS #31 US1_TX #4 US1_RX #3 US1_CLK #2 US1_CS #1 US1_CTS #0 US1_RTS #31 LEU0_TX #4 LEU0_RX #3 I2C0_SDA #4 I2C0_SCL #3 FRC_DCLK #4 FRC_DOUT #3 FRC_DFRAME #2 MODEM_DCLK #4 MODEM_DIN #3 MODEM_DOUT #2 MODEM_ANT0 #1 MODEM_ANT1 #0 PRS_CH6 #4 PRS_CH7 #3 PRS_CH8 #2 PRS_CH9 #1 ACMP0_O #4 ACMP1_O #4 TIM0_CC0 #5 TIM0_CC1 #4 TIM0_CC2 #3 TIM0_CDTI0 #2 TIM0_CDTI1 #1 TIM0_CDTI2 #0 TIM1_CC0 #5 TIM1_CC1 #4 TIM1_CC2 #3 TIM1_CC3 #2 LETIM0_OUT0 #5 LETIM0_OUT1 #4 PCNT0_S0IN #5 PCNT0_S1IN #4 US0_TX #5 US0_RX #4 US0_CLK #3 US0_CS #2 US0_CTS #1 US0_RTS #0 US1_TX #5 US1_RX #4 US1_CLK #3 US1_CS #2 US1_CTS #1 US1_RTS #0 LEU0_TX #5 LEU0_RX #4 I2C0_SDA #5 I2C0_SCL #4 FRC_DCLK #5 FRC_DOUT #4 FRC_DFRAME #3 MODEM_DCLK #5 MODEM_DIN #4 MODEM_DOUT #3 MODEM_ANT0 #2 MODEM_ANT1 #1 PRS_CH6 #5 PRS_CH7 #4 PRS_CH8 #3 PRS_CH9 #2 ACMP0_O #5 ACMP1_O #5 BUSDX [ADC0: APORT4XCH11 ACMP0: APORT4XCH11 ACMP1: APORT4XCH11] 29 PA4 BUSCX [ADC0: APORT3XCH12 ACMP0: APORT3XCH12 ACMP1: APORT3XCH12 IDAC0: APORT1XCH12] BUSDY [ADC0: APORT4YCH12 ACMP0: APORT4YCH12 ACMP1: APORT4YCH12] 30 PA5 BUSCY [ADC0: APORT3YCH13 ACMP0: APORT3YCH13 ACMP1: APORT3YCH13 IDAC0: APORT1YCH13] BUSDX [ADC0: APORT4XCH13 ACMP0: APORT4XCH13 ACMP1: APORT4XCH13] silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 57 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions QFN48 Pin# and Name Pin # 31 Pin Alternate Functionality / Description Pin Name Analog Timers Communication Radio Other PB11 BUSCY [ADC0: APORT3YCH27 ACMP0: APORT3YCH27 ACMP1: APORT3YCH27 IDAC0: APORT1YCH27] TIM0_CC0 #6 TIM0_CC1 #5 TIM0_CC2 #4 TIM0_CDTI0 #3 TIM0_CDTI1 #2 TIM0_CDTI2 #1 TIM1_CC0 #6 TIM1_CC1 #5 TIM1_CC2 #4 TIM1_CC3 #3 LETIM0_OUT0 #6 LETIM0_OUT1 #5 PCNT0_S0IN #6 PCNT0_S1IN #5 US0_TX #6 US0_RX #5 US0_CLK #4 US0_CS #3 US0_CTS #2 US0_RTS #1 US1_TX #6 US1_RX #5 US1_CLK #4 US1_CS #3 US1_CTS #2 US1_RTS #1 LEU0_TX #6 LEU0_RX #5 I2C0_SDA #6 I2C0_SCL #5 FRC_DCLK #6 FRC_DOUT #5 FRC_DFRAME #4 MODEM_DCLK #6 MODEM_DIN #5 MODEM_DOUT #4 MODEM_ANT0 #3 MODEM_ANT1 #2 PRS_CH6 #6 PRS_CH7 #5 PRS_CH8 #4 PRS_CH9 #3 ACMP0_O #6 ACMP1_O #6 TIM0_CC0 #7 TIM0_CC1 #6 TIM0_CC2 #5 TIM0_CDTI0 #4 TIM0_CDTI1 #3 TIM0_CDTI2 #2 TIM1_CC0 #7 TIM1_CC1 #6 TIM1_CC2 #5 TIM1_CC3 #4 LETIM0_OUT0 #7 LETIM0_OUT1 #6 PCNT0_S0IN #7 PCNT0_S1IN #6 US0_TX #7 US0_RX #6 US0_CLK #5 US0_CS #4 US0_CTS #3 US0_RTS #2 US1_TX #7 US1_RX #6 US1_CLK #5 US1_CS #4 US1_CTS #3 US1_RTS #2 LEU0_TX #7 LEU0_RX #6 I2C0_SDA #7 I2C0_SCL #6 FRC_DCLK #7 FRC_DOUT #6 FRC_DFRAME #5 MODEM_DCLK #7 MODEM_DIN #6 MODEM_DOUT #5 MODEM_ANT0 #4 MODEM_ANT1 #3 PRS_CH6 #7 PRS_CH7 #6 PRS_CH8 #5 PRS_CH9 #4 ACMP0_O #7 ACMP1_O #7 TIM0_CC0 #8 TIM0_CC1 #7 TIM0_CC2 #6 TIM0_CDTI0 #5 TIM0_CDTI1 #4 TIM0_CDTI2 #3 TIM1_CC0 #8 TIM1_CC1 #7 TIM1_CC2 #6 TIM1_CC3 #5 LETIM0_OUT0 #8 LETIM0_OUT1 #7 PCNT0_S0IN #8 PCNT0_S1IN #7 US0_TX #8 US0_RX #7 US0_CLK #6 US0_CS #5 US0_CTS #4 US0_RTS #3 US1_TX #8 US1_RX #7 US1_CLK #6 US1_CS #5 US1_CTS #4 US1_RTS #3 LEU0_TX #8 LEU0_RX #7 I2C0_SDA #8 I2C0_SCL #7 FRC_DCLK #8 FRC_DOUT #7 FRC_DFRAME #6 MODEM_DCLK #8 MODEM_DIN #7 MODEM_DOUT #6 MODEM_ANT0 #5 MODEM_ANT1 #4 PRS_CH6 #8 PRS_CH7 #7 PRS_CH8 #6 PRS_CH9 #5 ACMP0_O #8 ACMP1_O #8 DBG_SWO #1 GPIO_EM4WU9 BUSDX [ADC0: APORT4XCH27 ACMP0: APORT4XCH27 ACMP1: APORT4XCH27] 32 PB12 BUSCX [ADC0: APORT3XCH28 ACMP0: APORT3XCH28 ACMP1: APORT3XCH28 IDAC0: APORT1XCH28] BUSDY [ADC0: APORT4YCH28 ACMP0: APORT4YCH28 ACMP1: APORT4YCH28] 33 PB13 BUSCY [ADC0: APORT3YCH29 ACMP0: APORT3YCH29 ACMP1: APORT3YCH29 IDAC0: APORT1YCH29] BUSDX [ADC0: APORT4XCH29 ACMP0: APORT4XCH29 ACMP1: APORT4XCH29] 34 AVDD Analog power supply. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 58 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions QFN48 Pin# and Name Pin # Pin Name Pin Alternate Functionality / Description Analog Timers Communication Radio Other TIM0_CC0 #9 TIM0_CC1 #8 TIM0_CC2 #7 TIM0_CDTI0 #6 TIM0_CDTI1 #5 TIM0_CDTI2 #4 TIM1_CC0 #9 TIM1_CC1 #8 TIM1_CC2 #7 TIM1_CC3 #6 LETIM0_OUT0 #9 LETIM0_OUT1 #8 PCNT0_S0IN #9 PCNT0_S1IN #8 US0_TX #9 US0_RX #8 US0_CLK #7 US0_CS #6 US0_CTS #5 US0_RTS #4 US1_TX #9 US1_RX #8 US1_CLK #7 US1_CS #6 US1_CTS #5 US1_RTS #4 LEU0_TX #9 LEU0_RX #8 I2C0_SDA #9 I2C0_SCL #8 FRC_DCLK #9 FRC_DOUT #8 FRC_DFRAME #7 MODEM_DCLK #9 MODEM_DIN #8 MODEM_DOUT #7 MODEM_ANT0 #6 MODEM_ANT1 #5 CMU_CLK1 #1 PRS_CH6 #9 PRS_CH7 #8 PRS_CH8 #7 PRS_CH9 #6 ACMP0_O #9 ACMP1_O #9 TIM0_CC0 #10 TIM0_CC1 #9 TIM0_CC2 #8 TIM0_CDTI0 #7 TIM0_CDTI1 #6 TIM0_CDTI2 #5 TIM1_CC0 #10 TIM1_CC1 #9 TIM1_CC2 #8 TIM1_CC3 #7 LETIM0_OUT0 #10 LETIM0_OUT1 #9 PCNT0_S0IN #10 PCNT0_S1IN #9 US0_TX #10 US0_RX #9 US0_CLK #8 US0_CS #7 US0_CTS #6 US0_RTS #5 US1_TX #10 US1_RX #9 US1_CLK #8 US1_CS #7 US1_CTS #6 US1_RTS #5 LEU0_TX #10 LEU0_RX #9 I2C0_SDA #10 I2C0_SCL #9 FRC_DCLK #10 FRC_DOUT #9 FRC_DFRAME #8 MODEM_DCLK #10 MODEM_DIN #9 MODEM_DOUT #8 MODEM_ANT0 #7 MODEM_ANT1 #6 CMU_CLK0 #1 PRS_CH6 #10 PRS_CH7 #9 PRS_CH8 #8 PRS_CH9 #7 ACMP0_O #10 ACMP1_O #10 LFXTAL_N 35 PB14 BUSCX [ADC0: APORT3XCH30 ACMP0: APORT3XCH30 ACMP1: APORT3XCH30 IDAC0: APORT1XCH30] BUSDY [ADC0: APORT4YCH30 ACMP0: APORT4YCH30 ACMP1: APORT4YCH30] LFXTAL_P 36 PB15 BUSCY [ADC0: APORT3YCH31 ACMP0: APORT3YCH31 ACMP1: APORT3YCH31 IDAC0: APORT1YCH31] BUSDX [ADC0: APORT4XCH31 ACMP0: APORT4XCH31 ACMP1: APORT4XCH31] 37 VREGVSS Voltage regulator VSS 38 VREGSW DCDC regulator switching node 39 VREGVDD Voltage regulator VDD input 40 DVDD 41 DECOUPLE 42 IOVDD Digital power supply. Decouple output for on-chip voltage regulator. An external capacitance of size CDECOUPLE is required at this pin. Digital IO power supply. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 59 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions QFN48 Pin# and Name Pin # 43 44 45 Pin Name PC6 PC7 PC8 Pin Alternate Functionality / Description Analog BUSAX [ADC0: APORT1XCH6 ACMP0: APORT1XCH6 ACMP1: APORT1XCH6] BUSBY [ADC0: APORT2YCH6 ACMP0: APORT2YCH6 ACMP1: APORT2YCH6] BUSAY [ADC0: APORT1YCH7 ACMP0: APORT1YCH7 ACMP1: APORT1YCH7] BUSBX [ADC0: APORT2XCH7 ACMP0: APORT2XCH7 ACMP1: APORT2XCH7] BUSAX [ADC0: APORT1XCH8 ACMP0: APORT1XCH8 ACMP1: APORT1XCH8] BUSBY [ADC0: APORT2YCH8 ACMP0: APORT2YCH8 ACMP1: APORT2YCH8] silabs.com | Smart. Connected. Energy-friendly. Timers Communication Radio Other TIM0_CC0 #11 TIM0_CC1 #10 TIM0_CC2 #9 TIM0_CDTI0 #8 TIM0_CDTI1 #7 TIM0_CDTI2 #6 TIM1_CC0 #11 TIM1_CC1 #10 TIM1_CC2 #9 TIM1_CC3 #8 LETIM0_OUT0 #11 LETIM0_OUT1 #10 PCNT0_S0IN #11 PCNT0_S1IN #10 US0_TX #11 US0_RX #10 US0_CLK #9 US0_CS #8 US0_CTS #7 US0_RTS #6 US1_TX #11 US1_RX #10 US1_CLK #9 US1_CS #8 US1_CTS #7 US1_RTS #6 LEU0_TX #11 LEU0_RX #10 I2C0_SDA #11 I2C0_SCL #10 FRC_DCLK #11 FRC_DOUT #10 FRC_DFRAME #9 MODEM_DCLK #11 MODEM_DIN #10 MODEM_DOUT #9 MODEM_ANT0 #8 MODEM_ANT1 #7 CMU_CLK0 #2 PRS_CH0 #8 PRS_CH9 #11 PRS_CH10 #0 PRS_CH11 #5 ACMP0_O #11 ACMP1_O #11 TIM0_CC0 #12 TIM0_CC1 #11 TIM0_CC2 #10 TIM0_CDTI0 #9 TIM0_CDTI1 #8 TIM0_CDTI2 #7 TIM1_CC0 #12 TIM1_CC1 #11 TIM1_CC2 #10 TIM1_CC3 #9 LETIM0_OUT0 #12 LETIM0_OUT1 #11 PCNT0_S0IN #12 PCNT0_S1IN #11 US0_TX #12 US0_RX #11 US0_CLK #10 US0_CS #9 US0_CTS #8 US0_RTS #7 US1_TX #12 US1_RX #11 US1_CLK #10 US1_CS #9 US1_CTS #8 US1_RTS #7 LEU0_TX #12 LEU0_RX #11 I2C0_SDA #12 I2C0_SCL #11 FRC_DCLK #12 FRC_DOUT #11 FRC_DFRAME #10 MODEM_DCLK #12 MODEM_DIN #11 MODEM_DOUT #10 MODEM_ANT0 #9 MODEM_ANT1 #8 CMU_CLK1 #2 PRS_CH0 #9 PRS_CH9 #12 PRS_CH10 #1 PRS_CH11 #0 ACMP0_O #12 ACMP1_O #12 TIM0_CC0 #13 TIM0_CC1 #12 TIM0_CC2 #11 TIM0_CDTI0 #10 TIM0_CDTI1 #9 TIM0_CDTI2 #8 TIM1_CC0 #13 TIM1_CC1 #12 TIM1_CC2 #11 TIM1_CC3 #10 LETIM0_OUT0 #13 LETIM0_OUT1 #12 PCNT0_S0IN #13 PCNT0_S1IN #12 US0_TX #13 US0_RX #12 US0_CLK #11 US0_CS #10 US0_CTS #9 US0_RTS #8 US1_TX #13 US1_RX #12 US1_CLK #11 US1_CS #10 US1_CTS #9 US1_RTS #8 LEU0_TX #13 LEU0_RX #12 I2C0_SDA #13 I2C0_SCL #12 FRC_DCLK #13 FRC_DOUT #12 FRC_DFRAME #11 MODEM_DCLK #13 MODEM_DIN #12 MODEM_DOUT #11 MODEM_ANT0 #10 MODEM_ANT1 #9 PRS_CH0 #10 PRS_CH9 #13 PRS_CH10 #2 PRS_CH11 #1 ACMP0_O #13 ACMP1_O #13 Preliminary Rev. 0.9 | 60 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions QFN48 Pin# and Name Pin # 46 47 48 Pin Name PC9 PC10 PC11 Pin Alternate Functionality / Description Analog BUSAY [ADC0: APORT1YCH9 ACMP0: APORT1YCH9 ACMP1: APORT1YCH9] BUSBX [ADC0: APORT2XCH9 ACMP0: APORT2XCH9 ACMP1: APORT2XCH9] BUSAX [ADC0: APORT1XCH10 ACMP0: APORT1XCH10 ACMP1: APORT1XCH10] BUSBY [ADC0: APORT2YCH10 ACMP0: APORT2YCH10 ACMP1: APORT2YCH10] BUSAY [ADC0: APORT1YCH11 ACMP0: APORT1YCH11 ACMP1: APORT1YCH11] BUSBX [ADC0: APORT2XCH11 ACMP0: APORT2XCH11 ACMP1: APORT2XCH11] silabs.com | Smart. Connected. Energy-friendly. Timers Communication Radio Other TIM0_CC0 #14 TIM0_CC1 #13 TIM0_CC2 #12 TIM0_CDTI0 #11 TIM0_CDTI1 #10 TIM0_CDTI2 #9 TIM1_CC0 #14 TIM1_CC1 #13 TIM1_CC2 #12 TIM1_CC3 #11 LETIM0_OUT0 #14 LETIM0_OUT1 #13 PCNT0_S0IN #14 PCNT0_S1IN #13 US0_TX #14 US0_RX #13 US0_CLK #12 US0_CS #11 US0_CTS #10 US0_RTS #9 US1_TX #14 US1_RX #13 US1_CLK #12 US1_CS #11 US1_CTS #10 US1_RTS #9 LEU0_TX #14 LEU0_RX #13 I2C0_SDA #14 I2C0_SCL #13 FRC_DCLK #14 FRC_DOUT #13 FRC_DFRAME #12 MODEM_DCLK #14 MODEM_DIN #13 MODEM_DOUT #12 MODEM_ANT0 #11 MODEM_ANT1 #10 PRS_CH0 #11 PRS_CH9 #14 PRS_CH10 #3 PRS_CH11 #2 ACMP0_O #14 ACMP1_O #14 TIM0_CC0 #15 TIM0_CC1 #14 TIM0_CC2 #13 TIM0_CDTI0 #12 TIM0_CDTI1 #11 TIM0_CDTI2 #10 TIM1_CC0 #15 TIM1_CC1 #14 TIM1_CC2 #13 TIM1_CC3 #12 LETIM0_OUT0 #15 LETIM0_OUT1 #14 PCNT0_S0IN #15 PCNT0_S1IN #14 US0_TX #15 US0_RX #14 US0_CLK #13 US0_CS #12 US0_CTS #11 US0_RTS #10 US1_TX #15 US1_RX #14 US1_CLK #13 US1_CS #12 US1_CTS #11 US1_RTS #10 LEU0_TX #15 LEU0_RX #14 I2C0_SDA #15 I2C0_SCL #14 FRC_DCLK #15 FRC_DOUT #14 FRC_DFRAME #13 MODEM_DCLK #15 MODEM_DIN #14 MODEM_DOUT #13 MODEM_ANT0 #12 MODEM_ANT1 #11 CMU_CLK1 #3 PRS_CH0 #12 PRS_CH9 #15 PRS_CH10 #4 PRS_CH11 #3 ACMP0_O #15 ACMP1_O #15 GPIO_EM4WU12 TIM0_CC0 #16 TIM0_CC1 #15 TIM0_CC2 #14 TIM0_CDTI0 #13 TIM0_CDTI1 #12 TIM0_CDTI2 #11 TIM1_CC0 #16 TIM1_CC1 #15 TIM1_CC2 #14 TIM1_CC3 #13 LETIM0_OUT0 #16 LETIM0_OUT1 #15 PCNT0_S0IN #16 PCNT0_S1IN #15 US0_TX #16 US0_RX #15 US0_CLK #14 US0_CS #13 US0_CTS #12 US0_RTS #11 US1_TX #16 US1_RX #15 US1_CLK #14 US1_CS #13 US1_CTS #12 US1_RTS #11 LEU0_TX #16 LEU0_RX #15 I2C0_SDA #16 I2C0_SCL #15 FRC_DCLK #16 FRC_DOUT #15 FRC_DFRAME #14 MODEM_DCLK #16 MODEM_DIN #15 MODEM_DOUT #14 MODEM_ANT0 #13 MODEM_ANT1 #12 CMU_CLK0 #3 PRS_CH0 #13 PRS_CH9 #16 PRS_CH10 #5 PRS_CH11 #4 ACMP0_O #16 ACMP1_O #16 DBG_SWO #3 Preliminary Rev. 0.9 | 61 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions 6.1.1 EFR32FG1 QFN48 2.4 GHz GPIO Overview The GPIO pins are organized as 16-bit ports indicated by letters A through F, and the individual pins on each port are indicated by a number from 15 down to 0. Table 6.2. GPIO Pinout Port Pin 15 Pin 14 Pin 13 Pin 12 Pin 11 Pin 10 Port A - - - - - - - - - - PA5 (5V) PA4 (5V) PA3 (5V) PA2 (5V) PA1 PA0 - - - - - - - - - - - PC9 (5V) PC8 (5V) PC7 (5V) PC6 (5V) - - - - - - - - - - - - - - - - Port B Port C Port D PB15 PB14 - - PB13 PB12 PB11 (5V) (5V) (5V) - - PC11 PC10 (5V) (5V) PD15 PD14 PD13 PD12 PD11 PD10 (5V) (5V) (5V) (5V) (5V) (5V) Pin 9 Pin 8 Pin 7 Pin 6 Pin 5 Pin 4 Pin 3 Pin 2 Pin 1 Pin 0 Port E - - - - - - - - - - - - - - - - Port F - - - - - - - - PF7 (5V) PF6 (5V) PF5 (5V) PF4 (5V) PF3 (5V) PF2 (5V) PF1 (5V) PF0 (5V) silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 62 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions 6.2 EFR32FG1 QFN32 2.4 GHz Definition Figure 6.2. EFR32FG1 QFN32 2.4 GHz Pinout silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 63 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions Table 6.3. Device Pinout QFN32 Pin# and Name Pin # Pin Name 0 VSS 1 2 3 PF0 PF1 PF2 Pin Alternate Functionality / Description Analog Timers Communication Radio Other TIM0_CC0 #24 TIM0_CC1 #23 TIM0_CC2 #22 TIM0_CDTI0 #21 TIM0_CDTI1 #20 TIM0_CDTI2 #19 TIM1_CC0 #24 TIM1_CC1 #23 TIM1_CC2 #22 TIM1_CC3 #21 LETIM0_OUT0 #24 LETIM0_OUT1 #23 PCNT0_S0IN #24 PCNT0_S1IN #23 US0_TX #24 US0_RX #23 US0_CLK #22 US0_CS #21 US0_CTS #20 US0_RTS #19 US1_TX #24 US1_RX #23 US1_CLK #22 US1_CS #21 US1_CTS #20 US1_RTS #19 LEU0_TX #24 LEU0_RX #23 I2C0_SDA #24 I2C0_SCL #23 FRC_DCLK #24 FRC_DOUT #23 FRC_DFRAME #22 MODEM_DCLK #24 MODEM_DIN #23 MODEM_DOUT #22 MODEM_ANT0 #21 MODEM_ANT1 #20 PRS_CH0 #0 PRS_CH1 #7 PRS_CH2 #6 PRS_CH3 #5 ACMP0_O #24 ACMP1_O #24 DBG_SWCLKTCK #0 TIM0_CC0 #25 TIM0_CC1 #24 TIM0_CC2 #23 TIM0_CDTI0 #22 TIM0_CDTI1 #21 TIM0_CDTI2 #20 TIM1_CC0 #25 TIM1_CC1 #24 TIM1_CC2 #23 TIM1_CC3 #22 LETIM0_OUT0 #25 LETIM0_OUT1 #24 PCNT0_S0IN #25 PCNT0_S1IN #24 US0_TX #25 US0_RX #24 US0_CLK #23 US0_CS #22 US0_CTS #21 US0_RTS #20 US1_TX #25 US1_RX #24 US1_CLK #23 US1_CS #22 US1_CTS #21 US1_RTS #20 LEU0_TX #25 LEU0_RX #24 I2C0_SDA #25 I2C0_SCL #24 FRC_DCLK #25 FRC_DOUT #24 FRC_DFRAME #23 MODEM_DCLK #25 MODEM_DIN #24 MODEM_DOUT #23 MODEM_ANT0 #22 MODEM_ANT1 #21 PRS_CH0 #1 PRS_CH1 #0 PRS_CH2 #7 PRS_CH3 #6 ACMP0_O #25 ACMP1_O #25 DBG_SWDIOTMS #0 TIM0_CC0 #26 TIM0_CC1 #25 TIM0_CC2 #24 TIM0_CDTI0 #23 TIM0_CDTI1 #22 TIM0_CDTI2 #21 TIM1_CC0 #26 TIM1_CC1 #25 TIM1_CC2 #24 TIM1_CC3 #23 LETIM0_OUT0 #26 LETIM0_OUT1 #25 PCNT0_S0IN #26 PCNT0_S1IN #25 US0_TX #26 US0_RX #25 US0_CLK #24 US0_CS #23 US0_CTS #22 US0_RTS #21 US1_TX #26 US1_RX #25 US1_CLK #24 US1_CS #23 US1_CTS #22 US1_RTS #21 LEU0_TX #26 LEU0_RX #25 I2C0_SDA #26 I2C0_SCL #25 FRC_DCLK #26 FRC_DOUT #25 FRC_DFRAME #24 MODEM_DCLK #26 MODEM_DIN #25 MODEM_DOUT #24 MODEM_ANT0 #23 MODEM_ANT1 #22 CMU_CLK0 #6 PRS_CH0 #2 PRS_CH1 #1 PRS_CH2 #0 PRS_CH3 #7 ACMP0_O #26 ACMP1_O #26 DBG_TDO #0 DBG_SWO #0 GPIO_EM4WU0 Ground BUSAX [ADC0: APORT1XCH16 ACMP0: APORT1XCH16 ACMP1: APORT1XCH16] BUSBY [ADC0: APORT2YCH16 ACMP0: APORT2YCH16 ACMP1: APORT2YCH16] BUSAY [ADC0: APORT1YCH17 ACMP0: APORT1YCH17 ACMP1: APORT1YCH17] BUSBX [ADC0: APORT2XCH17 ACMP0: APORT2XCH17 ACMP1: APORT2XCH17] BUSAX [ADC0: APORT1XCH18 ACMP0: APORT1XCH18 ACMP1: APORT1XCH18] BUSBY [ADC0: APORT2YCH18 ACMP0: APORT2YCH18 ACMP1: APORT2YCH18] silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 64 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions QFN32 Pin# and Name Pin # Pin Name Pin Alternate Functionality / Description Analog BUSAY [ADC0: APORT1YCH19 ACMP0: APORT1YCH19 ACMP1: APORT1YCH19] Timers Communication Radio Other TIM0_CC0 #27 TIM0_CC1 #26 TIM0_CC2 #25 TIM0_CDTI0 #24 TIM0_CDTI1 #23 TIM0_CDTI2 #22 TIM1_CC0 #27 TIM1_CC1 #26 TIM1_CC2 #25 TIM1_CC3 #24 LETIM0_OUT0 #27 LETIM0_OUT1 #26 PCNT0_S0IN #27 PCNT0_S1IN #26 US0_TX #27 US0_RX #26 US0_CLK #25 US0_CS #24 US0_CTS #23 US0_RTS #22 US1_TX #27 US1_RX #26 US1_CLK #25 US1_CS #24 US1_CTS #23 US1_RTS #22 LEU0_TX #27 LEU0_RX #26 I2C0_SDA #27 I2C0_SCL #26 FRC_DCLK #27 FRC_DOUT #26 FRC_DFRAME #25 MODEM_DCLK #27 MODEM_DIN #26 MODEM_DOUT #25 MODEM_ANT0 #24 MODEM_ANT1 #23 CMU_CLK1 #6 PRS_CH0 #3 PRS_CH1 #2 PRS_CH2 #1 PRS_CH3 #0 ACMP0_O #27 ACMP1_O #27 DBG_TDI #0 4 PF3 5 RFVDD 6 HFXTAL_N High Frequency Crystal input pin. 7 HFXTAL_P High Frequency Crystal output pin. 8 RESETn Reset input, active low.To apply an external reset source to this pin, it is required to only drive this pin low during reset, and let the internal pull-up ensure that reset is released. 9 RFVSS Radio Ground 10 PAVSS Power Amplifier (PA) voltage regulator VSS 11 2G4RF_ION 2.4 GHz Differential RF input/output, negative path. 12 2G4RF_IOP 2.4 GHz Differential RF input/output, positive path. 13 PAVDD Power Amplifier (PA) voltage regulator VDD input 14 PD13 BUSBX [ADC0: APORT2XCH19 ACMP0: APORT2XCH19 ACMP1: APORT2XCH19] Radio power supply BUSCY [ADC0: APORT3YCH5 ACMP0: APORT3YCH5 ACMP1: APORT3YCH5 IDAC0: APORT1YCH5] BUSDX [ADC0: APORT4XCH5 ACMP0: APORT4XCH5 ACMP1: APORT4XCH5] silabs.com | Smart. Connected. Energy-friendly. TIM0_CC0 #21 TIM0_CC1 #20 TIM0_CC2 #19 TIM0_CDTI0 #18 TIM0_CDTI1 #17 TIM0_CDTI2 #16 TIM1_CC0 #21 TIM1_CC1 #20 TIM1_CC2 #19 TIM1_CC3 #18 LETIM0_OUT0 #21 LETIM0_OUT1 #20 PCNT0_S0IN #21 PCNT0_S1IN #20 US0_TX #21 US0_RX #20 US0_CLK #19 US0_CS #18 US0_CTS #17 US0_RTS #16 US1_TX #21 US1_RX #20 US1_CLK #19 US1_CS #18 US1_CTS #17 US1_RTS #16 LEU0_TX #21 LEU0_RX #20 I2C0_SDA #21 I2C0_SCL #20 FRC_DCLK #21 FRC_DOUT #20 FRC_DFRAME #19 MODEM_DCLK #21 MODEM_DIN #20 MODEM_DOUT #19 MODEM_ANT0 #18 MODEM_ANT1 #17 PRS_CH3 #12 PRS_CH4 #4 PRS_CH5 #3 PRS_CH6 #15 ACMP0_O #21 ACMP1_O #21 Preliminary Rev. 0.9 | 65 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions QFN32 Pin# and Name Pin # 15 Pin Alternate Functionality / Description Pin Name Analog Timers Communication Radio Other PD14 BUSCX [ADC0: APORT3XCH6 ACMP0: APORT3XCH6 ACMP1: APORT3XCH6 IDAC0: APORT1XCH6] TIM0_CC0 #22 TIM0_CC1 #21 TIM0_CC2 #20 TIM0_CDTI0 #19 TIM0_CDTI1 #18 TIM0_CDTI2 #17 TIM1_CC0 #22 TIM1_CC1 #21 TIM1_CC2 #20 TIM1_CC3 #19 LETIM0_OUT0 #22 LETIM0_OUT1 #21 PCNT0_S0IN #22 PCNT0_S1IN #21 US0_TX #22 US0_RX #21 US0_CLK #20 US0_CS #19 US0_CTS #18 US0_RTS #17 US1_TX #22 US1_RX #21 US1_CLK #20 US1_CS #19 US1_CTS #18 US1_RTS #17 LEU0_TX #22 LEU0_RX #21 I2C0_SDA #22 I2C0_SCL #21 FRC_DCLK #22 FRC_DOUT #21 FRC_DFRAME #20 MODEM_DCLK #22 MODEM_DIN #21 MODEM_DOUT #20 MODEM_ANT0 #19 MODEM_ANT1 #18 CMU_CLK0 #5 PRS_CH3 #13 PRS_CH4 #5 PRS_CH5 #4 PRS_CH6 #16 ACMP0_O #22 ACMP1_O #22 GPIO_EM4WU4 TIM0_CC0 #23 TIM0_CC1 #22 TIM0_CC2 #21 TIM0_CDTI0 #20 TIM0_CDTI1 #19 TIM0_CDTI2 #18 TIM1_CC0 #23 TIM1_CC1 #22 TIM1_CC2 #21 TIM1_CC3 #20 LETIM0_OUT0 #23 LETIM0_OUT1 #22 PCNT0_S0IN #23 PCNT0_S1IN #22 US0_TX #23 US0_RX #22 US0_CLK #21 US0_CS #20 US0_CTS #19 US0_RTS #18 US1_TX #23 US1_RX #22 US1_CLK #21 US1_CS #20 US1_CTS #19 US1_RTS #18 LEU0_TX #23 LEU0_RX #22 I2C0_SDA #23 I2C0_SCL #22 FRC_DCLK #23 FRC_DOUT #22 FRC_DFRAME #21 MODEM_DCLK #23 MODEM_DIN #22 MODEM_DOUT #21 MODEM_ANT0 #20 MODEM_ANT1 #19 CMU_CLK1 #5 PRS_CH3 #14 PRS_CH4 #6 PRS_CH5 #5 PRS_CH6 #17 ACMP0_O #23 ACMP1_O #23 DBG_SWO #2 TIM0_CC0 #0 TIM0_CC1 #31 TIM0_CC2 #30 TIM0_CDTI0 #29 TIM0_CDTI1 #28 TIM0_CDTI2 #27 TIM1_CC0 #0 TIM1_CC1 #31 TIM1_CC2 #30 TIM1_CC3 #29 LETIM0_OUT0 #0 LETIM0_OUT1 #31 PCNT0_S0IN #0 PCNT0_S1IN #31 US0_TX #0 US0_RX #31 US0_CLK #30 US0_CS #29 US0_CTS #28 US0_RTS #27 US1_TX #0 US1_RX #31 US1_CLK #30 US1_CS #29 US1_CTS #28 US1_RTS #27 LEU0_TX #0 LEU0_RX #31 I2C0_SDA #0 I2C0_SCL #31 FRC_DCLK #0 FRC_DOUT #31 FRC_DFRAME #30 MODEM_DCLK #0 MODEM_DIN #31 MODEM_DOUT #30 MODEM_ANT0 #29 MODEM_ANT1 #28 CMU_CLK1 #0 PRS_CH6 #0 PRS_CH7 #10 PRS_CH8 #9 PRS_CH9 #8 ACMP0_O #0 ACMP1_O #0 BUSDY [ADC0: APORT4YCH6 ACMP0: APORT4YCH6 ACMP1: APORT4YCH6] 16 PD15 BUSCY [ADC0: APORT3YCH7 ACMP0: APORT3YCH7 ACMP1: APORT3YCH7 IDAC0: APORT1YCH7] BUSDX [ADC0: APORT4XCH7 ACMP0: APORT4XCH7 ACMP1: APORT4XCH7] ADC0_EXTN 17 PA0 BUSCX [ADC0: APORT3XCH8 ACMP0: APORT3XCH8 ACMP1: APORT3XCH8 IDAC0: APORT1XCH8] BUSDY [ADC0: APORT4YCH8 ACMP0: APORT4YCH8 ACMP1: APORT4YCH8] silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 66 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions QFN32 Pin# and Name Pin # Pin Name Pin Alternate Functionality / Description Analog Timers Communication Radio Other TIM0_CC0 #1 TIM0_CC1 #0 TIM0_CC2 #31 TIM0_CDTI0 #30 TIM0_CDTI1 #29 TIM0_CDTI2 #28 TIM1_CC0 #1 TIM1_CC1 #0 TIM1_CC2 #31 TIM1_CC3 #30 LETIM0_OUT0 #1 LETIM0_OUT1 #0 PCNT0_S0IN #1 PCNT0_S1IN #0 US0_TX #1 US0_RX #0 US0_CLK #31 US0_CS #30 US0_CTS #29 US0_RTS #28 US1_TX #1 US1_RX #0 US1_CLK #31 US1_CS #30 US1_CTS #29 US1_RTS #28 LEU0_TX #1 LEU0_RX #0 I2C0_SDA #1 I2C0_SCL #0 FRC_DCLK #1 FRC_DOUT #0 FRC_DFRAME #31 MODEM_DCLK #1 MODEM_DIN #0 MODEM_DOUT #31 MODEM_ANT0 #30 MODEM_ANT1 #29 CMU_CLK0 #0 PRS_CH6 #1 PRS_CH7 #0 PRS_CH8 #10 PRS_CH9 #9 ACMP0_O #1 ACMP1_O #1 TIM0_CC0 #6 TIM0_CC1 #5 TIM0_CC2 #4 TIM0_CDTI0 #3 TIM0_CDTI1 #2 TIM0_CDTI2 #1 TIM1_CC0 #6 TIM1_CC1 #5 TIM1_CC2 #4 TIM1_CC3 #3 LETIM0_OUT0 #6 LETIM0_OUT1 #5 PCNT0_S0IN #6 PCNT0_S1IN #5 US0_TX #6 US0_RX #5 US0_CLK #4 US0_CS #3 US0_CTS #2 US0_RTS #1 US1_TX #6 US1_RX #5 US1_CLK #4 US1_CS #3 US1_CTS #2 US1_RTS #1 LEU0_TX #6 LEU0_RX #5 I2C0_SDA #6 I2C0_SCL #5 FRC_DCLK #6 FRC_DOUT #5 FRC_DFRAME #4 MODEM_DCLK #6 MODEM_DIN #5 MODEM_DOUT #4 MODEM_ANT0 #3 MODEM_ANT1 #2 PRS_CH6 #6 PRS_CH7 #5 PRS_CH8 #4 PRS_CH9 #3 ACMP0_O #6 ACMP1_O #6 TIM0_CC0 #7 TIM0_CC1 #6 TIM0_CC2 #5 TIM0_CDTI0 #4 TIM0_CDTI1 #3 TIM0_CDTI2 #2 TIM1_CC0 #7 TIM1_CC1 #6 TIM1_CC2 #5 TIM1_CC3 #4 LETIM0_OUT0 #7 LETIM0_OUT1 #6 PCNT0_S0IN #7 PCNT0_S1IN #6 US0_TX #7 US0_RX #6 US0_CLK #5 US0_CS #4 US0_CTS #3 US0_RTS #2 US1_TX #7 US1_RX #6 US1_CLK #5 US1_CS #4 US1_CTS #3 US1_RTS #2 LEU0_TX #7 LEU0_RX #6 I2C0_SDA #7 I2C0_SCL #6 FRC_DCLK #7 FRC_DOUT #6 FRC_DFRAME #5 MODEM_DCLK #7 MODEM_DIN #6 MODEM_DOUT #5 MODEM_ANT0 #4 MODEM_ANT1 #3 PRS_CH6 #7 PRS_CH7 #6 PRS_CH8 #5 PRS_CH9 #4 ACMP0_O #7 ACMP1_O #7 ADC0_EXTP 18 PA1 BUSCY [ADC0: APORT3YCH9 ACMP0: APORT3YCH9 ACMP1: APORT3YCH9 IDAC0: APORT1YCH9] BUSDX [ADC0: APORT4XCH9 ACMP0: APORT4XCH9 ACMP1: APORT4XCH9] 19 PB11 BUSCY [ADC0: APORT3YCH27 ACMP0: APORT3YCH27 ACMP1: APORT3YCH27 IDAC0: APORT1YCH27] BUSDX [ADC0: APORT4XCH27 ACMP0: APORT4XCH27 ACMP1: APORT4XCH27] 20 PB12 BUSCX [ADC0: APORT3XCH28 ACMP0: APORT3XCH28 ACMP1: APORT3XCH28 IDAC0: APORT1XCH28] BUSDY [ADC0: APORT4YCH28 ACMP0: APORT4YCH28 ACMP1: APORT4YCH28] silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 67 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions QFN32 Pin# and Name Pin # 21 Pin Alternate Functionality / Description Pin Name Analog Timers Communication Radio Other PB13 BUSCY [ADC0: APORT3YCH29 ACMP0: APORT3YCH29 ACMP1: APORT3YCH29 IDAC0: APORT1YCH29] TIM0_CC0 #8 TIM0_CC1 #7 TIM0_CC2 #6 TIM0_CDTI0 #5 TIM0_CDTI1 #4 TIM0_CDTI2 #3 TIM1_CC0 #8 TIM1_CC1 #7 TIM1_CC2 #6 TIM1_CC3 #5 LETIM0_OUT0 #8 LETIM0_OUT1 #7 PCNT0_S0IN #8 PCNT0_S1IN #7 US0_TX #8 US0_RX #7 US0_CLK #6 US0_CS #5 US0_CTS #4 US0_RTS #3 US1_TX #8 US1_RX #7 US1_CLK #6 US1_CS #5 US1_CTS #4 US1_RTS #3 LEU0_TX #8 LEU0_RX #7 I2C0_SDA #8 I2C0_SCL #7 FRC_DCLK #8 FRC_DOUT #7 FRC_DFRAME #6 MODEM_DCLK #8 MODEM_DIN #7 MODEM_DOUT #6 MODEM_ANT0 #5 MODEM_ANT1 #4 PRS_CH6 #8 PRS_CH7 #7 PRS_CH8 #6 PRS_CH9 #5 ACMP0_O #8 ACMP1_O #8 DBG_SWO #1 GPIO_EM4WU9 TIM0_CC0 #9 TIM0_CC1 #8 TIM0_CC2 #7 TIM0_CDTI0 #6 TIM0_CDTI1 #5 TIM0_CDTI2 #4 TIM1_CC0 #9 TIM1_CC1 #8 TIM1_CC2 #7 TIM1_CC3 #6 LETIM0_OUT0 #9 LETIM0_OUT1 #8 PCNT0_S0IN #9 PCNT0_S1IN #8 US0_TX #9 US0_RX #8 US0_CLK #7 US0_CS #6 US0_CTS #5 US0_RTS #4 US1_TX #9 US1_RX #8 US1_CLK #7 US1_CS #6 US1_CTS #5 US1_RTS #4 LEU0_TX #9 LEU0_RX #8 I2C0_SDA #9 I2C0_SCL #8 FRC_DCLK #9 FRC_DOUT #8 FRC_DFRAME #7 MODEM_DCLK #9 MODEM_DIN #8 MODEM_DOUT #7 MODEM_ANT0 #6 MODEM_ANT1 #5 CMU_CLK1 #1 PRS_CH6 #9 PRS_CH7 #8 PRS_CH8 #7 PRS_CH9 #6 ACMP0_O #9 ACMP1_O #9 TIM0_CC0 #10 TIM0_CC1 #9 TIM0_CC2 #8 TIM0_CDTI0 #7 TIM0_CDTI1 #6 TIM0_CDTI2 #5 TIM1_CC0 #10 TIM1_CC1 #9 TIM1_CC2 #8 TIM1_CC3 #7 LETIM0_OUT0 #10 LETIM0_OUT1 #9 PCNT0_S0IN #10 PCNT0_S1IN #9 US0_TX #10 US0_RX #9 US0_CLK #8 US0_CS #7 US0_CTS #6 US0_RTS #5 US1_TX #10 US1_RX #9 US1_CLK #8 US1_CS #7 US1_CTS #6 US1_RTS #5 LEU0_TX #10 LEU0_RX #9 I2C0_SDA #10 I2C0_SCL #9 FRC_DCLK #10 FRC_DOUT #9 FRC_DFRAME #8 MODEM_DCLK #10 MODEM_DIN #9 MODEM_DOUT #8 MODEM_ANT0 #7 MODEM_ANT1 #6 CMU_CLK0 #1 PRS_CH6 #10 PRS_CH7 #9 PRS_CH8 #8 PRS_CH9 #7 ACMP0_O #10 ACMP1_O #10 BUSDX [ADC0: APORT4XCH29 ACMP0: APORT4XCH29 ACMP1: APORT4XCH29] 22 AVDD Analog power supply. LFXTAL_N 23 PB14 BUSCX [ADC0: APORT3XCH30 ACMP0: APORT3XCH30 ACMP1: APORT3XCH30 IDAC0: APORT1XCH30] BUSDY [ADC0: APORT4YCH30 ACMP0: APORT4YCH30 ACMP1: APORT4YCH30] LFXTAL_P 24 PB15 BUSCY [ADC0: APORT3YCH31 ACMP0: APORT3YCH31 ACMP1: APORT3YCH31 IDAC0: APORT1YCH31] BUSDX [ADC0: APORT4XCH31 ACMP0: APORT4XCH31 ACMP1: APORT4XCH31] 25 VREGVSS Voltage regulator VSS 26 VREGSW DCDC regulator switching node 27 VREGVDD Voltage regulator VDD input 28 DVDD Digital power supply. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 68 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions QFN32 Pin# and Name Pin # Pin Name 29 DECOUPLE 30 IOVDD 31 32 PC10 PC11 Pin Alternate Functionality / Description Analog Timers Communication Radio Other Decouple output for on-chip voltage regulator. An external capacitance of size CDECOUPLE is required at this pin. Digital IO power supply. BUSAX [ADC0: APORT1XCH10 ACMP0: APORT1XCH10 ACMP1: APORT1XCH10] BUSBY [ADC0: APORT2YCH10 ACMP0: APORT2YCH10 ACMP1: APORT2YCH10] BUSAY [ADC0: APORT1YCH11 ACMP0: APORT1YCH11 ACMP1: APORT1YCH11] BUSBX [ADC0: APORT2XCH11 ACMP0: APORT2XCH11 ACMP1: APORT2XCH11] silabs.com | Smart. Connected. Energy-friendly. TIM0_CC0 #15 TIM0_CC1 #14 TIM0_CC2 #13 TIM0_CDTI0 #12 TIM0_CDTI1 #11 TIM0_CDTI2 #10 TIM1_CC0 #15 TIM1_CC1 #14 TIM1_CC2 #13 TIM1_CC3 #12 LETIM0_OUT0 #15 LETIM0_OUT1 #14 PCNT0_S0IN #15 PCNT0_S1IN #14 US0_TX #15 US0_RX #14 US0_CLK #13 US0_CS #12 US0_CTS #11 US0_RTS #10 US1_TX #15 US1_RX #14 US1_CLK #13 US1_CS #12 US1_CTS #11 US1_RTS #10 LEU0_TX #15 LEU0_RX #14 I2C0_SDA #15 I2C0_SCL #14 FRC_DCLK #15 FRC_DOUT #14 FRC_DFRAME #13 MODEM_DCLK #15 MODEM_DIN #14 MODEM_DOUT #13 MODEM_ANT0 #12 MODEM_ANT1 #11 CMU_CLK1 #3 PRS_CH0 #12 PRS_CH9 #15 PRS_CH10 #4 PRS_CH11 #3 ACMP0_O #15 ACMP1_O #15 GPIO_EM4WU12 TIM0_CC0 #16 TIM0_CC1 #15 TIM0_CC2 #14 TIM0_CDTI0 #13 TIM0_CDTI1 #12 TIM0_CDTI2 #11 TIM1_CC0 #16 TIM1_CC1 #15 TIM1_CC2 #14 TIM1_CC3 #13 LETIM0_OUT0 #16 LETIM0_OUT1 #15 PCNT0_S0IN #16 PCNT0_S1IN #15 US0_TX #16 US0_RX #15 US0_CLK #14 US0_CS #13 US0_CTS #12 US0_RTS #11 US1_TX #16 US1_RX #15 US1_CLK #14 US1_CS #13 US1_CTS #12 US1_RTS #11 LEU0_TX #16 LEU0_RX #15 I2C0_SDA #16 I2C0_SCL #15 FRC_DCLK #16 FRC_DOUT #15 FRC_DFRAME #14 MODEM_DCLK #16 MODEM_DIN #15 MODEM_DOUT #14 MODEM_ANT0 #13 MODEM_ANT1 #12 CMU_CLK0 #3 PRS_CH0 #13 PRS_CH9 #16 PRS_CH10 #5 PRS_CH11 #4 ACMP0_O #16 ACMP1_O #16 DBG_SWO #3 Preliminary Rev. 0.9 | 69 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions 6.2.1 EFR32FG1 QFN32 2.4 GHz GPIO Overview The GPIO pins are organized as 16-bit ports indicated by letters A through F, and the individual pins on each port are indicated by a number from 15 down to 0. Table 6.4. GPIO Pinout Port Pin 15 Pin 14 Pin 13 Pin 12 Pin 11 Pin 10 Port A - - - - - - - - - - - - - - PA1 PA0 - - - - - - - - - - - - - - - - - - - - - Port B Port C Port D PB15 PB14 - - PB13 PB12 PB11 (5V) (5V) (5V) - PD15 PD14 PD13 (5V) (5V) (5V) - PC11 PC10 (5V) (5V) Pin 9 Pin 8 Pin 7 Pin 6 Pin 5 Pin 4 Pin 3 Pin 2 Pin 1 Pin 0 - - - - - - - - - - - - - Port E - - - - - - - - - - - - - - - - Port F - - - - - - - - - - - - PF3 (5V) PF2 (5V) PF1 (5V) PF0 (5V) silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 70 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions 6.3 Alternate Functionality Pinout A wide selection of alternate functionality is available for multiplexing to various pins. The following table shows the name of the alternate functionality in the first column, followed by columns showing the possible LOCATION bitfield settings. Note: Some functionality, such as analog interfaces, do not have alternate settings or a LOCATION bitfield. In these cases, the pinout is shown in the column corresponding to LOCATION 0. Table 6.5. Alternate functionality overview Alternate Functionality LOCATION 0-3 4-7 8 - 11 12 - 15 16 - 19 20 - 23 ACMP0_O 0: PA0 1: PA1 2: PA2 3: PA3 4: PA4 5: PA5 6: PB11 7: PB12 8: PB13 9: PB14 10: PB15 11: PC6 12: PC7 13: PC8 14: PC9 15: PC10 16: PC11 20: PD12 21: PD13 22: PD14 23: PD15 24: PF0 25: PF1 26: PF2 27: PF3 28: PF4 29: PF5 30: PF6 31: PF7 Analog comparator ACMP0, digital output. ACMP1_O 0: PA0 1: PA1 2: PA2 3: PA3 4: PA4 5: PA5 6: PB11 7: PB12 8: PB13 9: PB14 10: PB15 11: PC6 12: PC7 13: PC8 14: PC9 15: PC10 16: PC11 20: PD12 21: PD13 22: PD14 23: PD15 24: PF0 25: PF1 26: PF2 27: PF3 28: PF4 29: PF5 30: PF6 31: PF7 Analog comparator ACMP1, digital output. 18: PD10 19: PD11 18: PD10 19: PD11 24 - 27 28 - 31 Description 0: PA0 Analog to digital converter ADC0 external reference input negative pin 0: PA1 Analog to digital converter ADC0 external reference input positive pin ADC0_EXTN ADC0_EXTP CMU_CLK0 0: PA1 1: PB15 2: PC6 3: PC11 5: PD14 6: PF2 7: PF7 CMU_CLK1 0: PA0 1: PB14 2: PC7 3: PC10 4: PD10 5: PD15 6: PF3 7: PF6 0: PF0 DBG_SWCLKTCK Clock Management Unit, clock output number 0. Clock Management Unit, clock output number 1. Debug-interface Serial Wire clock input and JTAG Test Clock. Note that this function is enabled to the pin out of reset, and has a built-in pull down. 0: PF1 DBG_SWDIOTMS silabs.com | Smart. Connected. Energy-friendly. Debug-interface Serial Wire data input / output and JTAG Test Mode Select. Note that this function is enabled to the pin out of reset, and has a built-in pull up. Preliminary Rev. 0.9 | 71 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions Alternate Functionality DBG_SWO LOCATION 0-3 4-7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 Description Debug-interface Serial Wire viewer Output. 0: PF2 1: PB13 2: PD15 3: PC11 Note that this function is not enabled after reset, and must be enabled by software to be used. Debug-interface JTAG Test Data In. 0: PF3 Note that this function is enabled to pin out of reset, and has a built-in pull up. DBG_TDI Debug-interface JTAG Test Data Out. 0: PF2 DBG_TDO Note that this function is enabled to pin out of reset. 4: PA4 5: PA5 6: PB11 7: PB12 8: PB13 9: PB14 10: PB15 11: PC6 12: PC7 13: PC8 14: PC9 15: PC10 16: PC11 FRC_DCLK 0: PA0 1: PA1 2: PA2 3: PA3 FRC_DFRAME 0: PA2 1: PA3 2: PA4 3: PA5 4: PB11 5: PB12 6: PB13 7: PB14 8: PB15 9: PC6 10: PC7 11: PC8 12: PC9 13: PC10 14: PC11 FRC_DOUT 0: PA1 1: PA2 2: PA3 3: PA4 4: PA5 5: PB11 6: PB12 7: PB13 8: PB14 9: PB15 10: PC6 11: PC7 12: PC8 13: PC9 14: PC10 15: PC11 0: PF2 GPIO_EM4WU0 0: PF7 GPIO_EM4WU1 0: PD14 GPIO_EM4WU4 0: PA3 GPIO_EM4WU8 silabs.com | Smart. Connected. Energy-friendly. 18: PD10 19: PD11 20: PD12 21: PD13 22: PD14 23: PD15 24: PF0 25: PF1 26: PF2 27: PF3 28: PF4 29: PF5 30: PF6 31: PF7 Frame Controller, Data Sniffer Clock. 16: PD10 17: PD11 18: PD12 19: PD13 20: PD14 21: PD15 22: PF0 23: PF1 24: PF2 25: PF3 26: PF4 27: PF5 28: PF6 29: PF7 30: PA0 31: PA1 Frame Controller, Data Sniffer Frame active 17: PD10 18: PD11 19: PD12 20: PD13 21: PD14 22: PD15 23: PF0 24: PF1 25: PF2 26: PF3 27: PF4 28: PF5 29: PF6 30: PF7 31: PA0 Frame Controller, Data Sniffer Output. Pin can be used to wake the system up from EM4 Pin can be used to wake the system up from EM4 Pin can be used to wake the system up from EM4 Pin can be used to wake the system up from EM4 Preliminary Rev. 0.9 | 72 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions Alternate Functionality LOCATION 0-3 4-7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 0: PB13 Pin can be used to wake the system up from EM4 GPIO_EM4WU9 0: PC10 Pin can be used to wake the system up from EM4 GPIO_EM4WU12 I2C0_SCL 0: PA1 1: PA2 2: PA3 3: PA4 4: PA5 5: PB11 6: PB12 7: PB13 8: PB14 9: PB15 10: PC6 11: PC7 12: PC8 13: PC9 14: PC10 15: PC11 4: PA4 5: PA5 6: PB11 7: PB12 8: PB13 9: PB14 10: PB15 11: PC6 12: PC7 13: PC8 14: PC9 15: PC10 16: PC11 I2C0_SDA 0: PA0 1: PA1 2: PA2 3: PA3 4: PA4 5: PA5 6: PB11 7: PB12 8: PB13 9: PB14 10: PB15 11: PC6 12: PC7 13: PC8 14: PC9 15: PC10 16: PC11 LETIM0_OUT0 0: PA0 1: PA1 2: PA2 3: PA3 LETIM0_OUT1 0: PA1 1: PA2 2: PA3 3: PA4 4: PA5 5: PB11 6: PB12 7: PB13 8: PB14 9: PB15 10: PC6 11: PC7 LEU0_RX 0: PA1 1: PA2 2: PA3 3: PA4 4: PA5 5: PB11 6: PB12 7: PB13 LEU0_TX 0: PA0 1: PA1 2: PA2 3: PA3 4: PA4 5: PA5 6: PB11 7: PB12 20: PD13 21: PD14 22: PD15 23: PF0 24: PF1 25: PF2 26: PF3 27: PF4 28: PF5 29: PF6 30: PF7 31: PA0 I2C0 Serial Clock Line input / output. 20: PD12 21: PD13 22: PD14 23: PD15 24: PF0 25: PF1 26: PF2 27: PF3 28: PF4 29: PF5 30: PF6 31: PF7 I2C0 Serial Data input / output. 18: PD10 19: PD11 20: PD12 21: PD13 22: PD14 23: PD15 24: PF0 25: PF1 26: PF2 27: PF3 28: PF4 29: PF5 30: PF6 31: PF7 Low Energy Timer LETIM0, output channel 0. 12: PC8 13: PC9 14: PC10 15: PC11 17: PD10 18: PD11 19: PD12 20: PD13 21: PD14 22: PD15 23: PF0 24: PF1 25: PF2 26: PF3 27: PF4 28: PF5 29: PF6 30: PF7 31: PA0 Low Energy Timer LETIM0, output channel 1. 8: PB14 9: PB15 10: PC6 11: PC7 12: PC8 13: PC9 14: PC10 15: PC11 17: PD10 18: PD11 19: PD12 20: PD13 21: PD14 22: PD15 23: PF0 24: PF1 25: PF2 26: PF3 27: PF4 28: PF5 29: PF6 30: PF7 31: PA0 LEUART0 Receive input. 8: PB13 9: PB14 10: PB15 11: PC6 12: PC7 13: PC8 14: PC9 15: PC10 20: PD12 21: PD13 22: PD14 23: PD15 24: PF0 25: PF1 26: PF2 27: PF3 28: PF4 29: PF5 30: PF6 31: PF7 LEUART0 Transmit output. Also used as receive input in half duplex communication. 17: PD10 18: PD11 19: PD12 18: PD10 19: PD11 16: PC11 18: PD10 19: PD11 Low Frequency Crystal (typically 32.768 kHz) negative pin. Also used as an optional external clock input pin. 0: PB14 LFXTAL_N 0: PB15 Low Frequency Crystal (typically 32.768 kHz) positive pin. LFXTAL_P MODEM_ANT0 MODEM_ANT1 Description 0: PA3 1: PA4 2: PA5 3: PB11 4: PB12 5: PB13 6: PB14 7: PB15 8: PC6 9: PC7 10: PC8 11: PC9 12: PC10 13: PC11 0: PA4 1: PA5 2: PB11 3: PB12 4: PB13 5: PB14 6: PB15 7: PC6 8: PC7 9: PC8 10: PC9 11: PC10 12: PC11 silabs.com | Smart. Connected. Energy-friendly. 15: PD10 14: PD10 15: PD11 16: PD11 17: PD12 18: PD13 19: PD14 20: PD15 21: PF0 22: PF1 23: PF2 24: PF3 25: PF4 26: PF5 27: PF6 28: PF7 29: PA0 30: PA1 31: PA2 MODEM antenna control output 0, used for antenna diversity. 16: PD12 17: PD13 18: PD14 19: PD15 20: PF0 21: PF1 22: PF2 23: PF3 24: PF4 25: PF5 26: PF6 27: PF7 28: PA0 29: PA1 30: PA2 31: PA3 MODEM antenna control output 1, used for antenna diversity. Preliminary Rev. 0.9 | 73 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions Alternate Functionality LOCATION 0-3 4-7 8 - 11 12 - 15 16 - 19 20 - 23 MODEM_DCLK 0: PA0 1: PA1 2: PA2 3: PA3 4: PA4 5: PA5 6: PB11 7: PB12 8: PB13 9: PB14 10: PB15 11: PC6 12: PC7 13: PC8 14: PC9 15: PC10 16: PC11 18: PD10 19: PD11 20: PD12 21: PD13 22: PD14 23: PD15 24: PF0 25: PF1 26: PF2 27: PF3 28: PF4 29: PF5 30: PF6 31: PF7 MODEM data clock out. MODEM_DIN 0: PA1 1: PA2 2: PA3 3: PA4 4: PA5 5: PB11 6: PB12 7: PB13 8: PB14 9: PB15 10: PC6 11: PC7 12: PC8 13: PC9 14: PC10 15: PC11 17: PD10 18: PD11 19: PD12 20: PD13 21: PD14 22: PD15 23: PF0 24: PF1 25: PF2 26: PF3 27: PF4 28: PF5 29: PF6 30: PF7 31: PA0 MODEM data in. MODEM_DOUT 0: PA2 1: PA3 2: PA4 3: PA5 4: PB11 5: PB12 6: PB13 7: PB14 8: PB15 9: PC6 10: PC7 11: PC8 12: PC9 13: PC10 14: PC11 16: PD10 17: PD11 18: PD12 19: PD13 20: PD14 21: PD15 22: PF0 23: PF1 24: PF2 25: PF3 26: PF4 27: PF5 28: PF6 29: PF7 30: PA0 31: PA1 MODEM data out. 4: PA4 5: PA5 6: PB11 7: PB12 8: PB13 9: PB14 10: PB15 11: PC6 12: PC7 13: PC8 14: PC9 15: PC10 16: PC11 PCNT0_S0IN 0: PA0 1: PA1 2: PA2 3: PA3 18: PD10 19: PD11 20: PD12 21: PD13 22: PD14 23: PD15 24: PF0 25: PF1 26: PF2 27: PF3 28: PF4 29: PF5 30: PF6 31: PF7 Pulse Counter PCNT0 input number 0. PCNT0_S1IN 0: PA1 1: PA2 2: PA3 3: PA4 4: PA5 5: PB11 6: PB12 7: PB13 8: PB14 9: PB15 10: PC6 11: PC7 12: PC8 13: PC9 14: PC10 15: PC11 17: PD10 18: PD11 19: PD12 20: PD13 21: PD14 22: PD15 23: PF0 24: PF1 25: PF2 26: PF3 27: PF4 28: PF5 29: PF6 30: PF7 31: PA0 Pulse Counter PCNT0 input number 1. PRS_CH0 0: PF0 1: PF1 2: PF2 3: PF3 4: PF4 5: PF5 6: PF6 7: PF7 8: PC6 9: PC7 10: PC8 11: PC9 12: PC10 13: PC11 PRS_CH1 0: PF1 1: PF2 2: PF3 3: PF4 4: PF5 5: PF6 6: PF7 7: PF0 Peripheral Reflex System PRS, channel 1. PRS_CH2 0: PF2 1: PF3 2: PF4 3: PF5 4: PF6 5: PF7 6: PF0 7: PF1 Peripheral Reflex System PRS, channel 2. PRS_CH3 0: PF3 1: PF4 2: PF5 3: PF6 4: PF7 5: PF0 6: PF1 7: PF2 PRS_CH4 1: PD10 2: PD11 3: PD12 9: PD10 10: PD11 11: PD12 28 - 31 Description Peripheral Reflex System PRS, channel 0. 12: PD13 13: PD14 14: PD15 Peripheral Reflex System PRS, channel 3. 4: PD13 5: PD14 6: PD15 Peripheral Reflex System PRS, channel 4. PRS_CH5 0: PD10 1: PD11 2: PD12 3: PD13 4: PD14 5: PD15 PRS_CH6 0: PA0 1: PA1 2: PA2 3: PA3 4: PA4 5: PA5 6: PB11 7: PB12 8: PB13 9: PB14 10: PB15 PRS_CH7 0: PA1 1: PA2 2: PA3 3: PA4 4: PA5 5: PB11 6: PB12 7: PB13 8: PB14 9: PB15 10: PA0 silabs.com | Smart. Connected. Energy-friendly. 24 - 27 Peripheral Reflex System PRS, channel 5. 12: PD10 13: PD11 14: PD12 15: PD13 16: PD14 17: PD15 Peripheral Reflex System PRS, channel 6. Peripheral Reflex System PRS, channel 7. Preliminary Rev. 0.9 | 74 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions Alternate Functionality LOCATION 0-3 4-7 8 - 11 12 - 15 PRS_CH8 0: PA2 1: PA3 2: PA4 3: PA5 4: PB11 5: PB12 6: PB13 7: PB14 8: PB15 9: PA0 10: PA1 PRS_CH9 0: PA3 1: PA4 2: PA5 3: PB11 4: PB12 5: PB13 6: PB14 7: PB15 8: PA0 9: PA1 10: PA2 11: PC6 PRS_CH10 0: PC6 1: PC7 2: PC8 3: PC9 4: PC10 5: PC11 PRS_CH11 0: PC7 1: PC8 2: PC9 3: PC10 4: PC11 5: PC6 TIM0_CC0 0: PA0 1: PA1 2: PA2 3: PA3 4: PA4 5: PA5 6: PB11 7: PB12 8: PB13 9: PB14 10: PB15 11: PC6 12: PC7 13: PC8 14: PC9 15: PC10 TIM0_CC1 0: PA1 1: PA2 2: PA3 3: PA4 4: PA5 5: PB11 6: PB12 7: PB13 8: PB14 9: PB15 10: PC6 11: PC7 12: PC8 13: PC9 14: PC10 15: PC11 TIM0_CC2 0: PA2 1: PA3 2: PA4 3: PA5 4: PB11 5: PB12 6: PB13 7: PB14 8: PB15 9: PC6 10: PC7 11: PC8 TIM0_CDTI0 0: PA3 1: PA4 2: PA5 3: PB11 4: PB12 5: PB13 6: PB14 7: PB15 TIM0_CDTI1 0: PA4 1: PA5 2: PB11 3: PB12 16 - 19 20 - 23 24 - 27 28 - 31 Description Peripheral Reflex System PRS, channel 8. 12: PC7 13: PC8 14: PC9 15: PC10 16: PC11 Peripheral Reflex System PRS, channel 9. Peripheral Reflex System PRS, channel 10. Peripheral Reflex System PRS, channel 11. 18: PD10 19: PD11 20: PD12 21: PD13 22: PD14 23: PD15 24: PF0 25: PF1 26: PF2 27: PF3 28: PF4 29: PF5 30: PF6 31: PF7 Timer 0 Capture Compare input / output channel 0. 17: PD10 18: PD11 19: PD12 20: PD13 21: PD14 22: PD15 23: PF0 24: PF1 25: PF2 26: PF3 27: PF4 28: PF5 29: PF6 30: PF7 31: PA0 Timer 0 Capture Compare input / output channel 1. 12: PC9 13: PC10 14: PC11 16: PD10 17: PD11 18: PD12 19: PD13 20: PD14 21: PD15 22: PF0 23: PF1 24: PF2 25: PF3 26: PF4 27: PF5 28: PF6 29: PF7 30: PA0 31: PA1 Timer 0 Capture Compare input / output channel 2. 8: PC6 9: PC7 10: PC8 11: PC9 12: PC10 13: PC11 16: PD11 17: PD12 18: PD13 19: PD14 20: PD15 21: PF0 22: PF1 23: PF2 24: PF3 25: PF4 26: PF5 27: PF6 28: PF7 29: PA0 30: PA1 31: PA2 Timer 0 Complimentary Dead Time Insertion channel 0. 4: PB13 5: PB14 6: PB15 7: PC6 8: PC7 9: PC8 10: PC9 11: PC10 12: PC11 14: PD10 15: PD11 16: PD12 17: PD13 18: PD14 19: PD15 20: PF0 21: PF1 22: PF2 23: PF3 24: PF4 25: PF5 26: PF6 27: PF7 28: PA0 29: PA1 30: PA2 31: PA3 Timer 0 Complimentary Dead Time Insertion channel 1. TIM0_CDTI2 0: PA5 1: PB11 2: PB12 3: PB13 4: PB14 5: PB15 6: PC6 7: PC7 8: PC8 9: PC9 10: PC10 11: PC11 13: PD10 14: PD11 15: PD12 16: PD13 17: PD14 18: PD15 19: PF0 20: PF1 21: PF2 22: PF3 23: PF4 24: PF5 25: PF6 26: PF7 27: PA0 28: PA1 29: PA2 30: PA3 31: PA4 Timer 0 Complimentary Dead Time Insertion channel 2. 4: PA4 5: PA5 6: PB11 7: PB12 8: PB13 9: PB14 10: PB15 11: PC6 12: PC7 13: PC8 14: PC9 15: PC10 16: PC11 TIM1_CC0 0: PA0 1: PA1 2: PA2 3: PA3 18: PD10 19: PD11 20: PD12 21: PD13 22: PD14 23: PD15 24: PF0 25: PF1 26: PF2 27: PF3 28: PF4 29: PF5 30: PF6 31: PF7 Timer 1 Capture Compare input / output channel 0. TIM1_CC1 0: PA1 1: PA2 2: PA3 3: PA4 4: PA5 5: PB11 6: PB12 7: PB13 8: PB14 9: PB15 10: PC6 11: PC7 12: PC8 13: PC9 14: PC10 15: PC11 17: PD10 18: PD11 19: PD12 20: PD13 21: PD14 22: PD15 23: PF0 24: PF1 25: PF2 26: PF3 27: PF4 28: PF5 29: PF6 30: PF7 31: PA0 Timer 1 Capture Compare input / output channel 1. TIM1_CC2 0: PA2 1: PA3 2: PA4 3: PA5 4: PB11 5: PB12 6: PB13 7: PB14 8: PB15 9: PC6 10: PC7 11: PC8 12: PC9 13: PC10 14: PC11 16: PD10 17: PD11 18: PD12 19: PD13 20: PD14 21: PD15 22: PF0 23: PF1 24: PF2 25: PF3 26: PF4 27: PF5 28: PF6 29: PF7 30: PA0 31: PA1 Timer 1 Capture Compare input / output channel 2. silabs.com | Smart. Connected. Energy-friendly. 15: PD10 16: PC11 Preliminary Rev. 0.9 | 75 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions Alternate Functionality LOCATION 0-3 4-7 8 - 11 12 - 15 16 - 19 20 - 23 0: PA3 1: PA4 2: PA5 3: PB11 4: PB12 5: PB13 6: PB14 7: PB15 8: PC6 9: PC7 10: PC8 11: PC9 12: PC10 13: PC11 16: PD11 17: PD12 18: PD13 19: PD14 20: PD15 21: PF0 22: PF1 23: PF2 24: PF3 25: PF4 26: PF5 27: PF6 28: PF7 29: PA0 30: PA1 31: PA2 Timer 1 Capture Compare input / output channel 3. US0_CLK 0: PA2 1: PA3 2: PA4 3: PA5 4: PB11 5: PB12 6: PB13 7: PB14 8: PB15 9: PC6 10: PC7 11: PC8 12: PC9 13: PC10 14: PC11 16: PD10 17: PD11 18: PD12 19: PD13 20: PD14 21: PD15 22: PF0 23: PF1 24: PF2 25: PF3 26: PF4 27: PF5 28: PF6 29: PF7 30: PA0 31: PA1 USART0 clock input / output. 0: PA3 1: PA4 2: PA5 3: PB11 4: PB12 5: PB13 6: PB14 7: PB15 8: PC6 9: PC7 10: PC8 11: PC9 12: PC10 13: PC11 16: PD11 17: PD12 18: PD13 19: PD14 20: PD15 21: PF0 22: PF1 23: PF2 24: PF3 25: PF4 26: PF5 27: PF6 28: PF7 29: PA0 30: PA1 31: PA2 US0_CS USART0 chip select input / output. 4: PB13 5: PB14 6: PB15 7: PC6 8: PC7 9: PC8 10: PC9 11: PC10 12: PC11 US0_CTS 0: PA4 1: PA5 2: PB11 3: PB12 14: PD10 15: PD11 16: PD12 17: PD13 18: PD14 19: PD15 20: PF0 21: PF1 22: PF2 23: PF3 24: PF4 25: PF5 26: PF6 27: PF7 28: PA0 29: PA1 30: PA2 31: PA3 USART0 Clear To Send hardware flow control input. US0_RTS 0: PA5 1: PB11 2: PB12 3: PB13 4: PB14 5: PB15 6: PC6 7: PC7 8: PC8 9: PC9 10: PC10 11: PC11 13: PD10 14: PD11 15: PD12 16: PD13 17: PD14 18: PD15 19: PF0 20: PF1 21: PF2 22: PF3 23: PF4 24: PF5 25: PF6 26: PF7 27: PA0 28: PA1 29: PA2 30: PA3 31: PA4 USART0 Request To Send hardware flow control output. TIM1_CC3 US0_RX 0: PA1 1: PA2 2: PA3 3: PA4 4: PA5 5: PB11 6: PB12 7: PB13 8: PB14 9: PB15 10: PC6 11: PC7 15: PD10 15: PD10 12: PC8 13: PC9 14: PC10 15: PC11 17: PD10 18: PD11 19: PD12 0: PA0 1: PA1 2: PA2 3: PA3 4: PA4 5: PA5 6: PB11 7: PB12 8: PB13 9: PB14 10: PB15 11: PC6 12: PC7 13: PC8 14: PC9 15: PC10 16: PC11 US1_CLK 0: PA2 1: PA3 2: PA4 3: PA5 4: PB11 5: PB12 6: PB13 7: PB14 8: PB15 9: PC6 10: PC7 11: PC8 US1_CS 0: PA3 1: PA4 2: PA5 3: PB11 4: PB12 5: PB13 6: PB14 7: PB15 US1_CTS 0: PA4 1: PA5 2: PB11 3: PB12 US1_RTS 0: PA5 1: PB11 2: PB12 3: PB13 US0_TX 20: PD13 21: PD14 22: PD15 23: PF0 24 - 27 24: PF1 25: PF2 26: PF3 27: PF4 28 - 31 28: PF5 29: PF6 30: PF7 31: PA0 Description USART0 Asynchronous Receive. USART0 Synchronous mode Master Input / Slave Output (MISO). USART0 Asynchronous Transmit. Also used as receive input in half duplex communication. 18: PD10 19: PD11 20: PD12 21: PD13 22: PD14 23: PD15 24: PF0 25: PF1 26: PF2 27: PF3 28: PF4 29: PF5 30: PF6 31: PF7 12: PC9 13: PC10 14: PC11 16: PD10 17: PD11 18: PD12 19: PD13 20: PD14 21: PD15 22: PF0 23: PF1 24: PF2 25: PF3 26: PF4 27: PF5 28: PF6 29: PF7 30: PA0 31: PA1 USART1 clock input / output. 8: PC6 9: PC7 10: PC8 11: PC9 12: PC10 13: PC11 16: PD11 17: PD12 18: PD13 19: PD14 20: PD15 21: PF0 22: PF1 23: PF2 24: PF3 25: PF4 26: PF5 27: PF6 28: PF7 29: PA0 30: PA1 31: PA2 USART1 chip select input / output. 4: PB13 5: PB14 6: PB15 7: PC6 8: PC7 9: PC8 10: PC9 11: PC10 12: PC11 14: PD10 15: PD11 16: PD12 17: PD13 18: PD14 19: PD15 20: PF0 21: PF1 22: PF2 23: PF3 24: PF4 25: PF5 26: PF6 27: PF7 28: PA0 29: PA1 30: PA2 31: PA3 USART1 Clear To Send hardware flow control input. 4: PB14 5: PB15 6: PC6 7: PC7 8: PC8 9: PC9 10: PC10 11: PC11 13: PD10 14: PD11 15: PD12 16: PD13 17: PD14 18: PD15 19: PF0 20: PF1 21: PF2 22: PF3 23: PF4 24: PF5 25: PF6 26: PF7 27: PA0 28: PA1 29: PA2 30: PA3 31: PA4 USART1 Request To Send hardware flow control output. silabs.com | Smart. Connected. Energy-friendly. 15: PD10 USART0 Synchronous mode Master Output / Slave Input (MOSI). Preliminary Rev. 0.9 | 76 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions Alternate Functionality US1_RX US1_TX LOCATION 0-3 4-7 8 - 11 0: PA1 1: PA2 2: PA3 3: PA4 4: PA5 5: PB11 6: PB12 7: PB13 8: PB14 9: PB15 10: PC6 11: PC7 0: PA0 1: PA1 2: PA2 3: PA3 4: PA4 5: PA5 6: PB11 7: PB12 silabs.com | Smart. Connected. Energy-friendly. 8: PB13 9: PB14 10: PB15 11: PC6 12 - 15 12: PC8 13: PC9 14: PC10 15: PC11 12: PC7 13: PC8 14: PC9 15: PC10 16 - 19 20 - 23 17: PD10 18: PD11 19: PD12 20: PD13 21: PD14 22: PD15 23: PF0 16: PC11 18: PD10 19: PD11 20: PD12 21: PD13 22: PD14 23: PD15 24 - 27 24: PF1 25: PF2 26: PF3 27: PF4 24: PF0 25: PF1 26: PF2 27: PF3 28 - 31 28: PF5 29: PF6 30: PF7 31: PA0 28: PF4 29: PF5 30: PF6 31: PF7 Description USART1 Asynchronous Receive. USART1 Synchronous mode Master Input / Slave Output (MISO). USART1 Asynchronous Transmit. Also used as receive input in half duplex communication. USART1 Synchronous mode Master Output / Slave Input (MOSI). Preliminary Rev. 0.9 | 77 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions 6.4 Analog Port (APORT) The Analog Port (APORT) is an infrastructure used to connect chip pins with on-chip analog clients such as analog comparators, ADCs, and DACs. The APORT consists of wires, switches, and control needed to configurably implement the routes. Please see the device Reference Manual for a complete description. PC6 PC8 PC10 PF0 PF2 PF4 PF6 BUSAX BUSBY PC7 PC9 PC11 PF1 PF3 PF5 PF7 BUSAY BUSBX PD10 PD12 PD14 PA0 PA2 PA4 PB12 PB14 BUSCX BUSDY PD11 PD13 PD15 PA1 PA3 PA5 PB11 PB13 PB15 BUSCY BUSDX 1X1Y2X2Y3X3Y4X4Y ACMP0 1X1Y2X2Y3X3Y4X4Y ACMP1 1X1Y2X2Y3X3Y4X4Y ADC0 1X1Y IDAC0 Figure 6.3. EFR32FG1 APORT silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 78 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions Table 6.6. APORT Client Map Analog Module ACMP0 ACMP0 ACMP0 ACMP0 Analog Module Channel APORT1XCH6 Shared Bus BUSAX Pin PC6 APORT1XCH8 PC8 APORT1XCH10 PC10 APORT1XCH16 PF0 APORT1XCH18 PF2 APORT1XCH20 PF4 APORT1XCH22 PF6 APORT1YCH7 BUSAY PC7 APORT1YCH9 PC9 APORT1YCH11 PC11 APORT1YCH17 PF1 APORT1YCH19 PF3 APORT1YCH21 PF5 APORT1YCH23 PF7 APORT2XCH7 BUSBX PC7 APORT2XCH9 PC9 APORT2XCH11 PC11 APORT2XCH17 PF1 APORT2XCH19 PF3 APORT2XCH21 PF5 APORT2XCH23 PF7 APORT2YCH6 BUSBY PC6 APORT2YCH8 PC8 APORT2YCH10 PC10 APORT2YCH16 PF0 APORT2YCH18 PF2 APORT2YCH20 PF4 APORT2YCH22 PF6 silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 79 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions Analog Module ACMP0 ACMP0 ACMP0 ACMP0 Analog Module Channel APORT3XCH2 Shared Bus BUSCX Pin PD10 APORT3XCH4 PD12 APORT3XCH6 PD14 APORT3XCH8 PA0 APORT3XCH10 PA2 APORT3XCH12 PA4 APORT3XCH28 PB12 APORT3XCH30 PB14 APORT3YCH3 BUSCY PD11 APORT3YCH5 PD13 APORT3YCH7 PD15 APORT3YCH9 PA1 APORT3YCH11 PA3 APORT3YCH13 PA5 APORT3YCH27 PB11 APORT3YCH29 PB13 APORT3YCH31 PB15 APORT4XCH3 BUSDX PD11 APORT4XCH5 PD13 APORT4XCH7 PD15 APORT4XCH9 PA1 APORT4XCH11 PA3 APORT4XCH13 PA5 APORT4XCH27 PB11 APORT4XCH29 PB13 APORT4XCH31 PB15 APORT4YCH2 BUSDY PD10 APORT4YCH4 PD12 APORT4YCH6 PD14 APORT4YCH8 PA0 APORT4YCH10 PA2 APORT4YCH12 PA4 APORT4YCH28 PB12 APORT4YCH30 PB14 silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 80 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions Analog Module ACMP1 ACMP1 ACMP1 ACMP1 ACMP1 Analog Module Channel APORT1XCH6 Shared Bus BUSAX Pin PC6 APORT1XCH8 PC8 APORT1XCH10 PC10 APORT1XCH16 PF0 APORT1XCH18 PF2 APORT1XCH20 PF4 APORT1XCH22 PF6 APORT1YCH7 BUSAY PC7 APORT1YCH9 PC9 APORT1YCH11 PC11 APORT1YCH17 PF1 APORT1YCH19 PF3 APORT1YCH21 PF5 APORT1YCH23 PF7 APORT2XCH7 BUSBX PC7 APORT2XCH9 PC9 APORT2XCH11 PC11 APORT2XCH17 PF1 APORT2XCH19 PF3 APORT2XCH21 PF5 APORT2XCH23 PF7 APORT2YCH6 BUSBY PC6 APORT2YCH8 PC8 APORT2YCH10 PC10 APORT2YCH16 PF0 APORT2YCH18 PF2 APORT2YCH20 PF4 APORT2YCH22 PF6 APORT3XCH2 BUSCX PD10 APORT3XCH4 PD12 APORT3XCH6 PD14 APORT3XCH8 PA0 APORT3XCH10 PA2 APORT3XCH12 PA4 APORT3XCH28 PB12 APORT3XCH30 PB14 silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 81 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions Analog Module ACMP1 ACMP1 ACMP1 ADC0 Analog Module Channel APORT3YCH3 Shared Bus BUSCY Pin PD11 APORT3YCH5 PD13 APORT3YCH7 PD15 APORT3YCH9 PA1 APORT3YCH11 PA3 APORT3YCH13 PA5 APORT3YCH27 PB11 APORT3YCH29 PB13 APORT3YCH31 PB15 APORT4XCH3 BUSDX PD11 APORT4XCH5 PD13 APORT4XCH7 PD15 APORT4XCH9 PA1 APORT4XCH11 PA3 APORT4XCH13 PA5 APORT4XCH27 PB11 APORT4XCH29 PB13 APORT4XCH31 PB15 APORT4YCH2 BUSDY PD10 APORT4YCH4 PD12 APORT4YCH6 PD14 APORT4YCH8 PA0 APORT4YCH10 PA2 APORT4YCH12 PA4 APORT4YCH28 PB12 APORT4YCH30 PB14 APORT1XCH6 BUSAX PC6 APORT1XCH8 PC8 APORT1XCH10 PC10 APORT1XCH16 PF0 APORT1XCH18 PF2 APORT1XCH20 PF4 APORT1XCH22 PF6 silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 82 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions Analog Module ADC0 ADC0 ADC0 ADC0 Analog Module Channel APORT1YCH7 Shared Bus BUSAY Pin PC7 APORT1YCH9 PC9 APORT1YCH11 PC11 APORT1YCH17 PF1 APORT1YCH19 PF3 APORT1YCH21 PF5 APORT1YCH23 PF7 APORT2XCH7 BUSBX PC7 APORT2XCH9 PC9 APORT2XCH11 PC11 APORT2XCH17 PF1 APORT2XCH19 PF3 APORT2XCH21 PF5 APORT2XCH23 PF7 APORT2YCH6 BUSBY PC6 APORT2YCH8 PC8 APORT2YCH10 PC10 APORT2YCH16 PF0 APORT2YCH18 PF2 APORT2YCH20 PF4 APORT2YCH22 PF6 APORT3XCH2 BUSCX PD10 APORT3XCH4 PD12 APORT3XCH6 PD14 APORT3XCH8 PA0 APORT3XCH10 PA2 APORT3XCH12 PA4 APORT3XCH28 PB12 APORT3XCH30 PB14 silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 83 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions Analog Module ADC0 ADC0 ADC0 IDAC0 Analog Module Channel APORT3YCH3 Shared Bus BUSCY Pin PD11 APORT3YCH5 PD13 APORT3YCH7 PD15 APORT3YCH9 PA1 APORT3YCH11 PA3 APORT3YCH13 PA5 APORT3YCH27 PB11 APORT3YCH29 PB13 APORT3YCH31 PB15 APORT4XCH3 BUSDX PD11 APORT4XCH5 PD13 APORT4XCH7 PD15 APORT4XCH9 PA1 APORT4XCH11 PA3 APORT4XCH13 PA5 APORT4XCH27 PB11 APORT4XCH29 PB13 APORT4XCH31 PB15 APORT4YCH2 BUSDY PD10 APORT4YCH4 PD12 APORT4YCH6 PD14 APORT4YCH8 PA0 APORT4YCH10 PA2 APORT4YCH12 PA4 APORT4YCH28 PB12 APORT4YCH30 PB14 APORT1XCH2 BUSCX PD10 APORT1XCH4 PD12 APORT1XCH6 PD14 APORT1XCH8 PA0 APORT1XCH10 PA2 APORT1XCH12 PA4 APORT1XCH28 PB12 APORT1XCH30 PB14 silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 84 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Pin Definitions Analog Module IDAC0 Analog Module Channel APORT1YCH3 Shared Bus BUSCY Pin PD11 APORT1YCH5 PD13 APORT1YCH7 PD15 APORT1YCH9 PA1 APORT1YCH11 PA3 APORT1YCH13 PA5 APORT1YCH27 PB11 APORT1YCH29 PB13 APORT1YCH31 PB15 silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 85 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet QFN48 Package Specifications 7. QFN48 Package Specifications 7.1 QFN48 Package Dimensions Figure 7.1. QFN48 Package Drawing silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 86 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet QFN48 Package Specifications Table 7.1. QFN48 Package Dimensions Dimension Min Typ Max A 0.80 0.85 0.90 A1 0.00 0.02 0.05 A3 0.20 REF b 0.18 0.25 0.30 D 6.90 7.00 7.10 E 6.90 7.00 7.10 D2 4.60 4.70 4.80 E2 4.60 4.70 4.80 e 0.50 BSC L 0.30 0.40 0.50 K 0.20 — — R 0.09 — 0.14 aaa 0.15 bbb 0.10 ccc 0.10 ddd 0.05 eee 0.08 fff 0.10 Note: 1. All dimensions shown are in millimeters (mm) unless otherwise noted. 2. Dimensioning and Tolerancing per ANSI Y14.5M-1994. 3. This drawing conforms to the JEDEC Solid State Outline MO-220, Variation VKKD-4. 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 87 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet QFN48 Package Specifications 7.2 QFN48 PCB Land Pattern Figure 7.2. QFN48 PCB Land Pattern Drawing silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 88 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet QFN48 Package Specifications Table 7.2. QFN48 PCB Land Pattern Dimensions Dimension Typ S1 6.01 S 6.01 L1 4.70 W1 4.70 e 0.50 W 0.26 L 0.86 Note: 1. All dimensions shown are in millimeters (mm) unless otherwise noted. 2. This Land Pattern Design is based on the IPC-7351 guidelines. 3. All metal pads are to be non-solder mask defined (NSMD). Clearance between the solder mask and the metal pad is to be 60 µm minimum, all the way around the pad. 4. A stainless steel, laser-cut and electro-polished stencil with trapezoidal walls should be used to assure good solder paste release. 5. The stencil thickness should be 0.125 mm (5 mils). 6. The ratio of stencil aperture to land pad size can be 1:1 for all perimeter pads. 7. A 4x4 array of 0.75 mm square openings on a 1.00 mm pitch can be used for the center ground pad. 8. A No-Clean, Type-3 solder paste is recommended. 9. The recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 89 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet QFN48 Package Specifications 7.3 QFN48 Package Marking EFR32 PPPPPPPPP YYWWTTTTTT # Figure 7.3. QFN48 Package Marking The package marking consists of: • PPPPPPPPP – The part number designation. 1. Family Code (B | M | F) 2. G (Gecko) 3. Generation (1) 4. Feature Code (3 | 2 | 1) 5. TRX Code (3 = TXRX | 2= RX | 1 = TX) 6. Band (1 = Sub-GHz | 2 = 2.4 GHz | 3 = Dual-band) 7. Flash (G = 256K | F = 128K | E = 64K | D = 32K) 8. Temperature Grade (G = -40 to 85 | I = -40 to 125) • YY – The last 2 digits of the assembly year. • WW – The 2-digit workweek when the device was assembled. • TTTTTT – A trace or manufacturing code. The first letter is the device revision. • # – Bootloader revision number. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 90 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet QFN32 Package Specifications 8. QFN32 Package Specifications 8.1 QFN32 Package Dimensions Figure 8.1. QFN32 Package Drawing silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 91 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet QFN32 Package Specifications Table 8.1. QFN32 Package Dimensions Dimension Min Typ Max A 0.80 0.85 0.90 A1 0.00 0.02 0.05 A3 0.20 REF b 0.18 0.25 0.30 D/E 4.90 5.00 5.10 D2/E2 3.40 3.50 3.60 E 0.50 BSC L 0.30 0.40 0.50 K 0.20 — — R 0.09 — 0.14 aaa 0.15 bbb 0.10 ccc 0.10 ddd 0.05 eee 0.08 fff 0.10 Note: 1. All dimensions shown are in millimeters (mm) unless otherwise noted. 2. Dimensioning and Tolerancing per ANSI Y14.5M-1994. 3. This drawing conforms to the JEDEC Solid State Outline MO-220, Variation VKKD-4. 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 92 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet QFN32 Package Specifications 8.2 QFN32 PCB Land Pattern Figure 8.2. QFN32 PCB Land Pattern Drawing silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 93 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet QFN32 Package Specifications Table 8.2. QFN32 PCB Land Pattern Dimensions Dimension Typ S1 4.01 S 4.01 L1 3.50 W1 3.50 e 0.50 W 0.26 L 0.86 Note: 1. All dimensions shown are in millimeters (mm) unless otherwise noted. 2. This Land Pattern Design is based on the IPC-7351 guidelines. 3. All metal pads are to be non-solder mask defined (NSMD). Clearance between the solder mask and the metal pad is to be 60 µm minimum, all the way around the pad. 4. A stainless steel, laser-cut and electro-polished stencil with trapezoidal walls should be used to assure good solder paste release. 5. The stencil thickness should be 0.125 mm (5 mils). 6. The ratio of stencil aperture to land pad size can be 1:1 for all perimeter pads. 7. A 3x3 array of 0.85 mm square openings on a 1.00 mm pitch can be used for the center ground pad. 8. A No-Clean, Type-3 solder paste is recommended. 9. The recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 94 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet QFN32 Package Specifications 8.3 QFN32 Package Marking EFR32 PPPPPPPPP YYWWTTTTTT Figure 8.3. QFN32 Package Marking The package marking consists of: • PPPPPPPPP – The part number designation. 1. Family Code (B | M | F) 2. G (Gecko) 3. Generation (1) 4. Feature Code (3 | 2 | 1) 5. TRX Code (3 = TXRX | 2= RX | 1 = TX) 6. Band (1 = Sub-GHz | 2 = 2.4 GHz | 3 = Dual-band) 7. Flash (G = 256K | F = 128K | E = 64K | D = 32K) 8. Temperature Grade (G = -40 to 85 | I = -40 to 125) • YY – The last 2 digits of the assembly year. • WW – The 2-digit workweek when the device was assembled. • TTTTTT – A trace or manufacturing code. The first letter is the device revision. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 95 EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet Revision History 9. Revision History 9.1 Revision 0.9 2016-01-12 • Updated electrical specifications with latest characterization data. • Added thermal characteristics table. • Updated OPN decoder figure to include extended family options. 9.2 Revision 0.81 2015-12-01 • Engineering samples note added to ordering information table. 9.3 Revision 0.8 2015-11-14 • • • • • • • • • • Initial external release. Consolidated individual device datasheets into single-family document. Re-formatted ordering information table and OPN decoder. Updated block diagrams for front page and system overview. Removed extraneous sections from DC-DC and wake-on-radio from system overview. Updated table formatting for electrical specifications to tech pubs standards. Updated electrcal specifications with latest available data. Added I2C and USART SPI timing tables. Moved DC-DC graph to typical performance curves. Updated APORT tables and APORT references to correct nomenclature. silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.9 | 96 Table of Contents 1. Feature List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3. System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3.2 Radio. . . . . . . . . . . . 3.2.1 Antenna Interface . . . . . . . 3.2.2 Fractional-N Frequency Synthesizer. 3.2.3 Receiver Architecture. . . . . . 3.2.4 Transmitter Architecture . . . . . 3.2.5 Wake on Radio . . . . . . . . 3.2.6 RFSENSE . . . . . . . . . 3.2.7 Flexible Frame Handling. . . . . 3.2.8 Packet and State Trace . . . . . 3.2.9 Data Buffering . . . . . . . . 3.2.10 Radio Controller (RAC). . . . . 3.2.11 Random Number Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 Power . . . . . . . . . . 3.3.1 Energy Management Unit (EMU) . 3.3.2 DC-DC Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 . 6 . 6 3.4 General Purpose Input/Output (GPIO). . . . . . . . . . . . . . . . . . . . . . 6 3.5 Clocking . . . . . . . . . . 3.5.1 Clock Management Unit (CMU) . 3.5.2 Internal and External Oscillators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 . 6 . 6 3.6 Counters/Timers and PWM . . . . . . . . 3.6.1 Timer/Counter (TIMER) . . . . . . . . . 3.6.2 Real Time Counter and Calendar (RTCC) . . . 3.6.3 Low Energy Timer (LETIMER). . . . . . . 3.6.4 Ultra Low Power Wake-up Timer (CRYOTIMER) 3.6.5 Pulse Counter (PCNT) . . . . . . . . . 3.6.6 Watchdog Timer (WDOG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7 7 7 7 7 7 3.7 Communications and Other Digital Peripherals . . . . . . . . . 3.7.1 Universal Synchronous/Asynchronous Receiver/Transmitter (USART) 3.7.2 Low Energy Universal Asynchronous Receiver/Transmitter (LEUART) 3.7.3 Inter-Integrated Circuit Interface (I2C) . . . . . . . . . . . 3.7.4 Peripheral Reflex System (PRS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7 8 8 8 3.8 Security Features. . . . . . . . . . . . . . . 3.8.1 GPCRC (General Purpose Cyclic Redundancy Check) . 3.8.2 Crypto Accelerator (CRYPTO). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 . 8 . 8 3.9 Analog . . . . . . . . . . . . . 3.9.1 Analog Port (APORT) . . . . . . . 3.9.2 Analog Comparator (ACMP) . . . . . 3.9.3 Analog to Digital Converter (ADC) . . . 3.9.4 Digital to Analog Current Converter (IDAC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table of Contents 3 3 4 4 4 4 4 5 5 5 5 5 8 8 8 9 9 97 3.10 Reset Management Unit (RMU) . . . . . . . . . . . . . . . . . 9 3.11 Core and Memory . . . . . . . . . . . 3.11.1 Processor Core . . . . . . . . . . . 3.11.2 Memory System Controller (MSC) . . . . . 3.11.3 Linked Direct Memory Access Controller (LDMA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.12 Memory Map . . . . . . . . . . 9 9 9 9 . . . . . . . . . . . . . . . . . . . . . . . . . .10 3.13 Configuration Summary . . . . . . . . . . . . . . . . . . . . . . . . . .11 4. Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4.1 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . 4.1.1 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . 4.1.2 Operating Conditions . . . . . . . . . . . . . . . . . . . . . . 4.1.2.1 General Operating Conditions . . . . . . . . . . . . . . . . . . 4.1.3 Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . 4.1.4 DC-DC Converter . . . . . . . . . . . . . . . . . . . . . . . 4.1.5 Current Consumption. . . . . . . . . . . . . . . . . . . . . . 4.1.5.1 Current Consumption 1.85 V without DC-DC Converter . . . . . . . . . 4.1.5.2 Current Consumption 3.3 V without DC-DC Converter . . . . . . . . . . 4.1.5.3 Current Consumption 3.3 V using DC-DC Converter . . . . . . . . . . 4.1.5.4 Current Consumption Using Radio . . . . . . . . . . . . . . . . 4.1.6 Wake up times . . . . . . . . . . . . . . . . . . . . . . . . 4.1.7 Brown Out Detector . . . . . . . . . . . . . . . . . . . . . . 4.1.8 Frequency Synthesizer Characteristics . . . . . . . . . . . . . . . . 4.1.9 2.4 GHz RF Transceiver Characteristics . . . . . . . . . . . . . . . 4.1.9.1 RF Transmitter General Characteristics for the 2.4 GHz Band . . . . . . . 4.1.9.2 RF Receiver General Characteristics for the 2.4 GHz Band . . . . . . . . 4.1.9.3 RF Transmitter Characteristics for 1Mbps 2GFSK in the 2.4 GHz Band . . . . 4.1.9.4 RF Receiver Characteristics for 1Mbps 2GFSK in the 2.4 GHz Band . . . . . 4.1.9.5 RF Transmitter Characteristics for 802.15.4 O-QPSK DSSS in the 2.4 GHz Band . 4.1.9.6 RF Receiver Characteristics for 802.15.4 O-QPSK DSSS in the 2.4 GHz Band. . 4.1.10 Modem Features . . . . . . . . . . . . . . . . . . . . . . . 4.1.11 Oscillators . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.11.1 LFXO . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.11.2 HFXO . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.11.3 LFRCO . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.11.4 HFRCO and AUXHFRCO . . . . . . . . . . . . . . . . . . . 4.1.11.5 ULFRCO . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.12 Flash Memory Characteristics . . . . . . . . . . . . . . . . . . 4.1.13 GPIO. . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.14 VMON . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.15 ADC . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.16 IDAC . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.17 Analog Comparator (ACMP) . . . . . . . . . . . . . . . . . . . 4.1.18 I2C . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.19 USART SPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 .13 .14 .14 .15 .16 .18 .18 .19 .20 .21 .21 .22 .22 .23 .23 .24 .25 .26 .28 .29 .30 .31 .31 .32 .32 .33 .34 .34 .35 .36 .37 .39 .41 .43 .45 4.2 Typical Performance Curves . . . . . .47 5. Typical Connection Diagrams . . . . . . . . . . . . . . . . . . . . . . . . 48 5.1 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Table of Contents 98 5.2 RF Matching Networks . . . . . . . . . . . . . . . . . . . . . . . . . . .49 5.3 Other Connections . . . . . . . . . . . . . . . . . . . . . . . . . . .49 6. Pin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 . 6.1 EFR32FG1 QFN48 2.4 GHz Definition . . . 6.1.1 EFR32FG1 QFN48 2.4 GHz GPIO Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 .62 6.2 EFR32FG1 QFN32 2.4 GHz Definition . . . 6.2.1 EFR32FG1 QFN32 2.4 GHz GPIO Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 .70 6.3 Alternate Functionality Pinout . . . . . . . . . . . . . . . . . . . . . . . .71 6.4 Analog Port (APORT) . . . . . . . . . . . . . . . . . . . . . . . . .78 7. QFN48 Package Specifications. . . . . . . . . . . . . . . . . . . . . . . . 86 . . 7.1 QFN48 Package Dimensions . . . . . . . . . . . . . . . . . . . . . . . . .86 7.2 QFN48 PCB Land Pattern . . . . . . . . . . . . . . . . . . . . . . . . . .88 7.3 QFN48 Package Marking . . . . . . . . . . . . . . . . . . . . . . . . . .90 8. QFN32 Package Specifications. . . . . . . . . . . . . . . . . . . . . . . . 91 8.1 QFN32 Package Dimensions . . . . . . . . . . . . . . . . . . . . . . . . .91 8.2 QFN32 PCB Land Pattern . . . . . . . . . . . . . . . . . . . . . . . . . .93 8.3 QFN32 Package Marking . . . . . . . . . . . . . . . . . . . . . . . . . .95 9. Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 9.1 Revision 0.9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 9.2 Revision 0.81 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 9.3 Revision 0.8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Table of Contents 99 . Simplicity Studio One-click access to MCU and wireless tools, documentation, software, source code libraries & more. Available for Windows, Mac and Linux! IoT Portfolio www.silabs.com/IoT SW/HW www.silabs.com/simplicity Quality www.silabs.com/quality Support and Community community.silabs.com Disclaimer Silicon Laboratories intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using or intending to use the Silicon Laboratories products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific device, and "Typical" parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Laboratories reserves the right to make changes without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy or completeness of the included information. Silicon Laboratories shall have no liability for the consequences of use of the information supplied herein. This document does not imply or express copyright licenses granted hereunder to design or fabricate any integrated circuits. The products must not be used within any Life Support System without the specific written consent of Silicon Laboratories. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected to result in significant personal injury or death. Silicon Laboratories products are generally not intended for military applications. Silicon Laboratories products shall under no circumstances be used in weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons. Trademark Information Silicon Laboratories Inc., Silicon Laboratories, Silicon Labs, SiLabs and the Silicon Labs logo, Bluegiga, CMEMS®, EFM, EFM32, EFR, Energy Micro, Energy Micro logo and combinations thereof, "the world’s most energy friendly microcontrollers", Ember®, EZLink®, EZMac®, EZRadio®, EZRadioPRO®, DSPLL®, ISOmodem ®, Precision32®, ProSLIC®, SiPHY®, Telegesis, USBXpress® and others are trademarks or registered trademarks of Silicon Laboratories Inc. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of ARM Holdings. Keil is a registered trademark of ARM Limited. All other products or brand names mentioned herein are trademarks of their respective holders. Silicon Laboratories Inc. 400 West Cesar Chavez Austin, TX 78701 USA http://www.silabs.com