SI32192-A-FM1

Si3219x: ProSLIC® Single FXS Solution ProSLIC® Single-Channel FXS Solutions KEY FEATURES The Si3219x Single FXS ProSLIC® devices implement a complete foreign exchange station (FXS) telephony interface solution in a single package that conforms to all relevant global specifications. The Si3219x ProSLIC ICs operate from a 3.3 V supply and have a 3-wire ISI digital interface with 1.8 to 3.3 V I/O. The Si3219x devices are designed to operate with a capacitive boost tracking battery supply for lower power, cost, and footprint than other tracking supplies in the industry. Self-testing and metallic loop testing (MLT) are facilitated by the built-in DSP, monitor ADC, and test load. The devices are available with wideband audio for better-than-PSTN voice quality and DTMF detection. The Si3219x devices are available in a 4 x 6 mm, 38-pin QFN package. • Complete FXS solution in a single 4 x 6 mm package • Performs all BORSCHT functions • Ideal for short- or medium-loop applications • Ultra-low power consumption • Patented low-power ringing • Adaptive ringing • Dynamic overhead control • Ringing current limiting Applications: • VoIP Gateways and Routers • xDSL IADs • Optical Network Terminals/Units (ONT/U) • Analog Terminal Adapters (ATA) • Cable eMTA • Wireless Fixed Terminals (WFT) • Wireless Local Loop (WLL) • WiMAX CPE • Simplified configuration and diagnostics • Supported by ProSLIC API • Audio diagnostics with loopback • Integrated test load • Global programmability • Wideband voice support • On-hook transmission • Loop or ground start operation • Smooth polarity reversal • A-Law/µ-Law companding, linear PCM Programmable AC Impedance and Hybrid DTMF and DTMF & Tone ToneGen Gen Caller ID Host Interface 3-wire ISI Ringing Ringing Generator Generator CODEC CODEC CODEC SLIC SLIC ADC ADC Linefeed Linefeed Control Control DAC DAC Linefeed Linefeed Monitor Monitor Linefeed • Flexible integrated tracking dc-dc controller supporting patent-pending low-cost capacitive boost configuration TIP FXS RING • Software-programmable parameters: • Ringing frequency, amplitude, cadence, and waveshape • Two-wire ac impedance • Transhybrid balance • DC current loop feed (10–45 mA) DSP Line LineDiagnostics Diagnostics • Loop closure and ring trip thresholds • Ground key detect threshold • Pulse metering PLL DC-DC Controller Si3219x • DTMF generation • DTMF detection (Si32193) • 3.3 V operation • Support for 1.8 V I/O • Maximum battery up to –100 V • Pb-free/RoHS-compliant packaging • 3-wire Integrated Serial Interface (ISI) silabs.com | Building a more connected world. This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Preliminary Rev. 0.9 Si3219x: ProSLIC® Single FXS Solution Ordering Guide 1. Ordering Guide Table 1.1. Si3219x Ordering Guide P/N Description Package Type2 Max VBAT Temperature Si32192-A-FM1 Wideband FXS, ISI interface, parametric MLT QFN38 –100 V 0 to 70 °C Si32192-A-GM1 Wideband FXS, ISI interface, parametric MLT QFN38 –100 V –40 to 85 °C Si32193-A-FM1 Wideband FXS, ISI interface, parametric MLT, DTMF detection QFN38 –100 V 0 to 70 °C Si32193-A-GM1 Wideband FXS, ISI interface, parametric MLT, DTMF detection QFN38 –100 V –40 to 85 °C Si32192-A-ZM1 Wideband FXS, ISI interface, parametric MLT, customer-specific QFN38 –100 V 0 to 70 °C Si32192-A-ZM2 Wideband FXS, ISI interface, parametric MLT, customer-specific QFN38 –100 V 0 to 70 °C Si32193-A-ZM1 Wideband FXS, ISI interface, parametric MLT, DTMF detection, customer-specific QFN38 –100 V 0 to 70 °C Si32193-A-ZM2 Wideband FXS, ISI interface, parametric MLT, DTMF detection, customer-specific QFN38 –100 V 0 to 70 °C Note: 1. Adding the suffix "R" to the part number (e.g. Si3219x-A-FMR) denotes tape and reel. 2. QFN - Quad-Flat No-leads. Table 1.2. Ordering GuideSi3219x Evaluation Kits Part Number Description VBAT Max1 Si32193ACB10SL0EVB ISI Wideband FXS with DTMF detection and low-cost capacitive boost dc-dc converter EVB –100 V Note: 1. EVB VBAT max may be limited by BOM option. silabs.com | Building a more connected world. Preliminary Rev. 0.9 | 1 Smart. Connected. Energy-Friendly. Products Quality Support and Community www.silabs.com/products www.silabs.com/quality community.silabs.com Disclaimer Silicon Labs intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using or intending to use the Silicon Labs products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific device, and "Typical" parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Labs reserves the right to make changes without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy or completeness of the included information. Silicon Labs shall have no liability for the consequences of use of the information supplied herein. This document does not imply or express copyright licenses granted hereunder to design or fabricate any integrated circuits. The products are not designed or authorized to be used within any Life Support System without the specific written consent of Silicon Labs. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected to result in significant personal injury or death. Silicon Labs products are not designed or authorized for military applications. Silicon Labs products shall under no circumstances be used in weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons. Trademark Information Silicon Laboratories Inc.® , Silicon Laboratories®, Silicon Labs®, SiLabs® and the Silicon Labs logo®, Bluegiga®, Bluegiga Logo®, Clockbuilder®, CMEMS®, DSPLL®, EFM®, EFM32®, EFR, Ember®, Energy Micro, Energy Micro logo and combinations thereof, "the world’s most energy friendly microcontrollers", Ember®, EZLink®, EZRadio®, EZRadioPRO®, Gecko®, ISOmodem®, Precision32®, ProSLIC®, Simplicity Studio®, SiPHY®, Telegesis, the Telegesis Logo®, USBXpress® and others are trademarks or registered trademarks of Silicon Labs. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of ARM Holdings. Keil is a registered trademark of ARM Limited. All other products or brand names mentioned herein are trademarks of their respective holders. Silicon Laboratories Inc. 400 West Cesar Chavez Austin, TX 78701 USA http://www.silabs.com