SI53341-B-GMR

Si53340-45 Data Sheet Low-Jitter LVDS Fanout Clock Buffers with up to 10 LVDS Outputs from Any-Format Input and Wide Frequency Range from dc up to 1250 MHz KEY FEATURES The Si53340-45 family of LVDS fanout buffers is ideal for clock/data distribution and redundant clocking applications. These devices feature typical ultra-low jitter of 50 fs and operate over a wide frequency range from dc to 1250 MHz. Built-in LDOs deliver high PSRR performance and reduces the need for external components simplifying low jitter clock distribution in noisy environments. They are available in multiple configurations and offer a selectable input clock using a 2:1 input mux. Other features include independent output enable and built-in format translation. These buffers can be paired with the Si534x clocks and Si5xx oscillators to deliver end-to-end clock tree performance. • Ultra-low additive jitter: 50 fs rms • Built-in LDOs for high PSRR performance • Up to 10 LVDS Outputs • Any-format Inputs (LVPECL, Low-Power LVPECL, LVDS, CML, HCSL, LVCMOS) • Wide frequency range: dc to 1250 MHz • Output Enable option • Multiple configuration options • 2:1 Input Mux • RoHS compliant, Pb-free • Temperature range: –40 to +85 °C VDD 4 Power Supply Filtering 4 Outputs Si53340/41 VDDOA OEAb CLK0* 3 0 3 Outputs Si53342/43 CLK1* 3 1 3 Outputs OEBb VDDOB CLK_SEL 10 10 Outputs Si53344/45 *Si53341/43/45 require Single-ended Inputs 1 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 26, 2021 1 Si53340-45 Data Sheet • Ordering Guide 1. Ordering Guide Table 1.1. Si5334x Ordering Guide 2 Part Number Input LVDS Output Output Enable (OE) Frequency Range Package SI53340-B-GM 2:1 selectable MUX Any-format 1 bank / 4 Outputs — dc to 1250 MHz 16-QFN 3 x 3 mm SI53341-B-GM 2:1 selectable MUX LVCMOS 1 bank / 4 Outputs — dc to 200 MHz 16-QFN 3 x 3 mm SI53342-B-GM 2:1 selectable MUX Any-format 2 banks / 3 Outputs 1 per bank dc to 1250 MHz 24-QFN 4 x 4 mm SI53343-B-GM 2:1 selectable MUX LVCMOS 2 banks / 3 Outputs 1 per bank dc to 200 MHz 24-QFN 4 x 4 mm SI53344-B-GM 2:1 selectable MUX Any-format 1 bank / 10 Outputs — dc to 1250 MHz 32-QFN 5 x 5 mm SI53345-B-GM 2:1 selectable MUX LVCMOS 1 bank / 10 Outputs — dc to 200 MHz 32-QFN 5 x 5 mm Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 26, 2021 2 Si53340-45 Data Sheet • Functional Description 2. Functional Description The Si53340-45 are a family of low-jitter, low skew, fixed format (LVDS) buffers. The Si53340/42/44 have a universal input that accepts most common differential or LVCMOS input signals, while the Si53341/43/45 accept only LVCMOS inputs. These devices are available in multiple configurations customized for the end application (refer to 1. Ordering Guide for more details on configurations). 2.1 Universal, Any-Format Input Termination (Si53340/42/44) The universal input stage enables simple interfacing to a wide variety of clock formats, including LVPECL, Low-power LVPECL, LVDS, CML, HCSL, and LVCMOS. The tables below summarize the various ac- and dc-coupling options supported by the device. For the best high-speed performance, the use of differential formats is recommended. For both single-ended and differential input clocks, the fastest possible slew rate is recommended since low slew rates can increase the noise floor and degrade jitter performance. Though not required, a minimum slew rate of 0.75 V/ns is recommended for differential formats and 1.0 V/ns for single-ended formats. See “AN766: Understanding and Optimizing Clock Buffer’s Additive Jitter Performance” for more information. Table 2.1. Clock Input Options Clock Format 1.8 V 2.5/3.3 V LVPECL/Low-power LVPECL N/A Yes LVCMOS No Yes LVDS Yes Yes HCSL No Yes (3.3 V) CML Yes Yes LVPECL/Low-power LVPECL N/A Yes LVCMOS No Yes LVDS No Yes HCSL No Yes (3.3 V) CML No No AC-Coupled DC-Coupled 3 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 26, 2021 3 Si53340-45 Data Sheet • Functional Description VDD 0.1 µF Si53340/42/44 CLKx 100 Ω CLKxb 0.1 µF Figure 2.1. Differential (HCSL, LVPECL, Low-Power LVPECL, LVDS, CML) AC-Coupled Input Termination VDD DC-Coupled 1 kΩ VDD = 3.3 V or 2.5 V CMOS Driver VDD Si53340/42/44 CLKx 50 CLKxb Rs VTERM = VDD/2 1 kΩ VDD VDD AC-Coupled 1 kΩ VBIAS = VDD/2 VDD = 3.3 V or 2.5 V CMOS Driver 1 kΩ VDD Si53340/42/44 CLKx 50 CLKxb Rs 1 kΩ Note: Value for Rs should be chosen so that the total source impedance matches the characteristic impedance of the PCB trace. 1 kΩ VTERM = VDD/2 Figure 2.2. Single-Ended (LVCMOS) Input Termination 4 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 26, 2021 4 Si53340-45 Data Sheet • Functional Description VDD DC Coupled LVPECL Input Termination Scheme 1 R1 VDD R1 VDD = 3.3 V or 2.5 V Si53340/42/44 50 Ω “Standard” LVPECL Driver CLKx CLKxb 50 Ω R2 VTERM = VDD – 2V R1 // R2 = 50 Ohm R2 3.3 V LVPECL: R1 = 127 Ohm, R2 = 82.5 Ohm 2.5 V LVPECL: R1 = 250 Ohm, R2 = 62.5 Ohm DC Coupled LVPECL Input Termination Scheme 2 VDD VDD = 3.3 V or 2.5 V Si53340/42/44 50 Ω “Standard” LVPECL Driver CLKx CLKxb 50 Ω 50 Ω 50 Ω VTERM = VDD – 2 V DC Coupled LVDS Input Termination VDD VDD = 3.3 V or 2.5 V Si53340/42/44 50 Ω Standard LVDS Driver CLKx 100 Ω CLKxb 50 Ω DC Coupled HCSL Input Termination Scheme VDD = 3.3 V Standard HCSL Driver Si53340/42/44 33 Ω 50 Ω 33 Ω 50 Ω VDD 50 Ω CLKx CLKxb 50 Ω Note: 33 Ohm series termination is optional depending on the location of the receiver. Figure 2.3. Differential DC-Coupled Input Terminations 5 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 26, 2021 5 Si53340-45 Data Sheet • Functional Description 2.2 LVCMOS Input Termination (Si53341/43/45) The table below summarizes the various ac- and dc-coupling options supported by the LVCMOS device, and the figure shows the recommended input clock termination. Note: 1.8V LVCMOS inputs are not supported for Si53341/43/45. Table 2.2. LVCMOS Input Clock Options LVCMOS AC-Coupled DC-Coupled 1.8 V No No 2.5/3.3 V Yes Yes VDD = 3.3 V or 2.5 V CMOS Driver VDD DC-Coupled Si53341/43/45 CLKx 50 Ω Rs NC VDD 1 kΩ VDD = 3.3 V or 2.5 V CMOS Driver VDD AC-Coupled Si53341/43/45 CLKx 50 Ω Rs NC 1 kΩ VBIAS = VDD/2 Note: Value for Rs should be chosen so that the total source impedance matches the characteristic impedance of the PCB trace. Figure 2.4. Recommended Input Clock Termination (Si53341/43/45) 6 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 26, 2021 6 Si53340-45 Data Sheet • Functional Description 2.3 Input Bias Resistors Internal bias resistors ensure a differential output low condition in the event that the clock inputs are not connected. The non-inverting input is biased with a 18.75 kΩ pull-down to GND and a 75 kΩ pull-up to VDD. The inverting input is biased with a 75 kΩ pull-up to VDD. VDD RPU CLK0 or CLK1 RPU + RPD – RPU = 75 kΩ RPD = 18.75 kΩ Figure 2.5. Input Bias Resistors Note: To minimize the possibility of system noise coupling into the Si5334x differential inputs and adversely affecting the buffered output, Silicon Labs recommends 1 PPS clocks and disabled/gapped clocks be DC-coupled and driven “stop-low” . 2.4 Input Mux The Si5334x provide two clock inputs for applications that need to select between one of two clock sources. The CLK_SEL pin selects the active clock input. The following table summarizes the input and output clock based on the input mux and output enable pin settings. Table 2.3. Input Mux Logic CLK_SEL CLK0 CLK1 Q1 Qb L L X L H L H X H L H X L L H H X H H L Note: 1. On the next negative transition of CLK0 or CLK1. 7 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 26, 2021 7 Si53340-45 Data Sheet • Functional Description 2.5 Output Clock Termination Options The recommended output clock termination options are shown below. Unused outputs should be left unconnected. DC Coupled LVDS Termination VDDXX Si5334x VDD 50 Q LVDS Receiver 100 Qb 50 AC Coupled LVDS Termination VDDXX Si5334x 0.1 µF Q VDD 50 100 Qb 50 LVDS Receiver 0.1 µF Note: For Si53340/41/44/45, VDDXX = VDD = 3.3 V, 2.5 V, 1.8 V For Si53342/43, VDDXX = VDDOA or VDDOB = 3.3 V, 2.5 V, 1.8 V Figure 2.6. LVDS Output Terminations 8 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 26, 2021 8 Si53340-45 Data Sheet • Functional Description 2.6 AC Timing Waveforms TPHL CLK TSK QN VPP/2 Q VPP/2 QM VPP/2 VPP/2 TPLH TSK Propagation Delay Output-Output Skew TF Q 80% VPP 20% VPP 80% VPP Q 20% VPP TR Rise/Fall Time Figure 2.7. AC Timing Waveforms 9 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 26, 2021 9 Si53340-45 Data Sheet • Functional Description 2.7 Typical Phase Noise Performance: Differential Input Clock Each of the three phase noise plots superimposes Source Jitter, Total SE Jitter and Total Diff Jitter on the same diagram. • Source Jitter—Reference clock phase noise (measured Single-ended to PNA). • Total Jitter (SE)—Combined source and clock buffer phase noise measured as a single-ended output to the phase noise analyzer and integrated from 12 kHz to 20 MHz. • Total Jitter (Diff)—Combined source and clock buffer phase noise measured as a differential output to the phase noise analyzer and integrated from 12 kHz to 20 MHz. The differential measurement as shown in each figure is made using a balun. For more information, see 3. Electrical Specifications. Note: To calculate the total RMS phase jitter when adding a buffer to your clock tree, use the root-sum-square (RSS). Total jitter measured here CLKx CLK SYNTH SMA103A Si5334x DUT AG E5052 Phase Noise Analyzer 50 50 Ohm Source jitter measured here Figure 2.8. Differential Measurement Method Using a Balun The total jitter is a measure of the source plus the buffer's additive phase jitter. The additive jitter (rms) of the buffer can then be calculated (via root-sum-square addition). Frequency (MHz) Differential Input Slew Rate (V/ns) Source Jitter (fs) Total Jitter (SE) (fs) Additive Jitter (SE) (fs) Total Jitter (Differential) (fs) Additive Jitter (Differential) (fs) 156.25 1.0 38.2 147.8 142.8 118.3 112.0 Figure 2.9. Total Jitter Differential Input (156.25 MHz) 10 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 26, 2021 10 Si53340-45 Data Sheet • Functional Description Frequency (MHz) Differential Input Slew Rate (V/ns) Source Jitter (fs) Total Jitter (SE) (fs) Additive Jitter (SE) (fs) Total Jitter (Differential) (fs) Additive Jitter (Differential) (fs) 312.5 1.0 33.10 94.39 88.39 83.80 76.99 Figure 2.10. Total Jitter Differential Input (312.5 MHz) Frequency (MHz) Differential Input Slew Rate (V/ns) Source Jitter (fs) Total Jitter (SE) (fs) Additive Jitter (SE) (fs) Total Jitter (Differential) (fs) Additive Jitter (Differential) (fs) 625 1.0 23 57 52 59 54 Figure 2.11. Total Jitter Differential Input (625 MHz) 11 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 26, 2021 11 Si53340-45 Data Sheet • Functional Description 2.8 Typical Phase Noise Performance: Single-Ended Input Clock For single-ended input phase noise measurements, the input was connected directly without the use of a balun. The following figure shows three phase noise plots superimposed on the same diagram. Frequency (MHz) Single-Ended Input Slew Rate (V/ns) Source Jitter (fs) Total Jitter (SE) (fs) Additive Jitter (SE) (fs) Total Jitter (Differential) (fs) Additive Jitter (Differential) (fs) 156.25 1.0 40.74 182.12 177.51 125.22 118.41 Figure 2.12. Total Jitter Single-Ended Input (156.25 MHz) 12 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 26, 2021 12 Si53340-45 Data Sheet • Functional Description 2.9 Input Mux Noise Isolation The input clock mux is designed to minimize crosstalk between the CLK0 and CLK1. This improves phase jitter performance when clocks are present at both the CLK0 and CLK1 inputs. The following figure shows a measurement of the input mux’s noise isolation. Figure 2.13. Input Mux Noise Isolation (Differential Input Clock, 44-QFN Package) Figure 2.14. Input Mux Noise Isolation (Single-Ended Input Clock, 24-QFN Package) 13 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 26, 2021 13 Si53340-45 Data Sheet • Functional Description 2.10 Power Supply Noise Rejection The device supports on-chip supply voltage regulation to reject power supply noise and simplify low-jitter operation in real-world environments. This feature enables robust operation alongside FPGAs, ASICs and SoCs and may reduce board-level filtering requirements. See “AN491: Power Supply Rejection for Low-Jitter Clocks” for more information. 14 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 26, 2021 14 Si53340-45 Data Sheet • Electrical Specifications 3. Electrical Specifications Table 3.1. Recommended Operating Conditions Parameter Symbol Ambient Operating Temperature TA Supply Voltage Range Test Condition VDD LVDS Min Typ Max Unit –40 — 85 °C 1.71 1.8 1.89 V 2.38 2.5 2.63 V 2.97 3.3 3.63 V Min Typ Max Unit Table 3.2. Input Clock Specifications VDD = 1.8 V, 2.5 V, or 3.3 V; TA = –40 to 85 °C Parameter Symbol Test Condition Differential Input Common Mode Voltage VCM 0.05 — — V Differential Input Swing (peakto-peak) VIN 0.2 — 2.2 V Input High Voltage VIH VDD x 0.7 — — V Input Low Voltage VIL — — VDD x 0.3 V Input Capacitance CIN — 5 — pF Test Condition Min Typ Max Unit Si53340/41 — 140 — mA Si53342/43 — 80 — mA Si53344/45 — 280 — mA CLK0 and CLK1 pins with respect to GND Table 3.3. DC Common Characteristics VDD = 1.8 V, 2.5 V, or 3.3 V; TA = –40 to 85 °C Parameter Core Supply Current Symbol IDD1 Output Supply Current (Per Clock Output) IDDO1 Si53342/43 — 21 — mA Input High Voltage VIH CLK_SEL, OEAb, OEBb VDD x 0.8 — — V Input Low Voltage VIL CLK_SEL, OEAb, OEBb — — VDD x 0.2 V Internal Pull-down Resistor RDOWN CLK_SEL, OEAb, OEBb — 25 — kΩ Note: 1. Measured using ac-coupled termination at VDD/VDDOX = 3.3 V. 15 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.2 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 26, 2021 15 Si53340-45 Data Sheet • Electrical Specifications Table 3.4. Output Characteristics (LVDS) VDD = 1.8 V, 2.5 V, or 3.3 V; TA = –40 to 85 °C Parameter Symbol Test Condition Min Typ Max Unit Single-Ended Output Swing1 VSE RL = 100 Ω across QN and QbN 200 — 490 mV Output Common Mode Voltage (VDD = 2.5 or 3.3 V) VCOM1 VDD = 2.38 to 2.63 V, 2.97 to 3.63 V, RL = 100 Ω across QN and QbN 1.10 1.25 1.35 V 0.83 0.97 1.25 V Test Condition Min Typ Max Unit Si53341/43/45 dc — 200 MHz Si53340/42/44 dc — 1250 MHz 20/80% TR/TF