WT12-A-AI5IAP

WT12 DATA SHEET Wednesday, 09 April 2014 Version 3.1 Copyright © 2000-2014 Bluegiga Technologies All rights reserved. Bluegiga Technologies assumes no responsibility for any errors which may appear in this manual. Furthermore, Bluegiga Technologies reserves the right to alter the hardware, software, and/or specifications detailed here at any time without notice and does not make any commitment to update the information contained here. Bluegiga’s products are not authorized for use as critical components in life support devices or systems. The WRAP is a registered trademark of Bluegiga Technologies The Bluetooth trademark is owned by the Bluetooth SIG Inc., USA and is licensed to Bluegiga Technologies. All other trademarks listed herein are owned by their respective owners. Bluegiga Technologies Oy Table of Contents 1 ORDERING INFORMATION .........................................................................................................................6 2 Block Diagram and Descriptions ...................................................................................................................7 3 Electrical Characteristics ...............................................................................................................................9 3.1 Absolute maximum ratings .....................................................................................................................9 3.2 Recommended operating conditions .....................................................................................................9 3.3 Terminal characteristics .........................................................................................................................9 3.4 Current consumption ........................................................................................................................... 10 3.5 Radio characteristics and general specifications ................................................................................ 11 3.6 Radio Characteristics – Basic Data Rate ............................................................................................ 12 3.6.1 Transmitter radio characteristics .................................................................................................. 12 3.6.2 Receiver radio characteristics ...................................................................................................... 13 3.7 Radio Characteristics – Enhanced Data Rate .................................................................................... 15 3.7.1 Transmitter radio characteristics .................................................................................................. 15 3.7.2 Receiver radio characteristics ...................................................................................................... 16 4 WT12 Pin Description ................................................................................................................................. 17 5 Physical Interfaces ..................................................................................................................................... 20 5.1 UART Interface.................................................................................................................................... 20 5.1.1 UART Configuration While RESET is Active ............................................................................... 21 5.1.2 UART Bypass Mode .................................................................................................................... 21 5.2 USB Interface ...................................................................................................................................... 23 5.2.1 USB Pull-Up Resistor ................................................................................................................... 23 5.2.2 Self Powered Mode ...................................................................................................................... 23 5.2.3 Bus Powered Mode ...................................................................................................................... 24 5.2.4 Suspend Current .......................................................................................................................... 24 5.2.5 Detach and Wake-Up Signaling ................................................................................................... 24 5.2.6 USB Driver ................................................................................................................................... 25 5.2.7 USB 1.1 Compliance .................................................................................................................... 25 5.2.8 USB 2.0 Compatibility .................................................................................................................. 25 5.3 SPI Interface........................................................................................................................................ 26 5.4 PCM Interface ..................................................................................................................................... 27 5.4.1 PCM Interface Master/Slave ........................................................................................................ 27 5.4.2 Long Frame Sync ......................................................................................................................... 28 5.4.3 Short Frame Sync ........................................................................................................................ 28 5.4.4 Multi Slot Operation ..................................................................................................................... 29 5.4.5 GCI Interface ................................................................................................................................ 29 5.4.6 Slots and Sample Formats........................................................................................................... 29 5.4.7 Additional Features .................................................................................................................... 30 Bluegiga Technologies Oy 5.4.8 PCM Configuration ....................................................................................................................... 30 6 I/O Parallel Ports ........................................................................................................................................ 32 7 Software Stacks.......................................................................................................................................... 33 7.1 iWRAP Stack ....................................................................................................................................... 33 7.2 HCI Stack ............................................................................................................................................ 34 7.2.1 Standard functionality .................................................................................................................. 34 7.2.2 Extra functionality: ........................................................................................................................ 36 7.3 VM Stack ............................................................................................................................................. 37 7.4 Software Development ........................................................................................................................ 38 8 Enhanced Data Rate .................................................................................................................................. 39 8.1 Enhanced Data Rate Baseband .......................................................................................................... 39 8.2 ...................................................................................................... 39 8.3 8DQPSK .............................................................................................................................................. 39 9 Layout and Soldering Considerations ........................................................................................................ 41 9.1 Soldering recommendations ............................................................................................................... 41 9.2 Layout guidelines ................................................................................................................................ 41 10 WT12 physical dimensions ..................................................................................................................... 44 11 Package .................................................................................................................................................. 46 12 Certifications ........................................................................................................................................... 48 12.1 Bluetooth ...................................................................................................................................... 48 12.2 FCC and IC .................................................................................................................................. 48 12.3 CE ................................................................................................................................................ 50 12.4 Japan ........................................................................................................................................... 50 13 RoHS Statement with a List of Banned Materials ................................................................................... 51 14 Contact Information................................................................................................................................. 52 Bluegiga Technologies Oy WT12 Bluetooth module DESCRIPTION KEY FEATURES WT12 is a fully integrated Bluetooth 2.1 + EDR, class 2 module combining antenna, Bluetooth radio and an on-board iWRAP Bluetooth stack. Bluegiga WT12 provides an ideal solution for developers that want to quickly integrate Bluetooth wireless technology to their design without investing several months into Bluetooth radio and stack development. Radio features: WT12 uses Bluegiga's iWRAP Bluetooth stack, which is an embedded Bluetooth stack implementing 13 different Bluetooth profiles and Apple iAP connectivity. By using WT12 combined with iWRAP Bluetooth stack and Bluegiga's excellent technical support designers ensure quick time to market, low development costs and risk. APPLICATIONS  Industrial and M2M  Mobile phone and tablet accessories  Point-of-Sale devices  Computer accessories  Apple iOS accessories  Bluetooth v.2.1 + EDR  Bluetooth class 2 radio  Transmit power: +3 dBm  Receiver sensitivity: -86 dBm  Range: 30 meters line-of-sight  Integrated chip antenna Hardware features:  UART and USB host interfaces  802.11 co-existence interface  6 software programmable IO pins  Opertating voltage: 2.7V to 3.6V  Temperature range: -40C to +85C  Dimensions: 25.5 x 14.0 x 2.4 mm Qualifications:  Bluetooth  CE  FCC  IC  Japan and South-Korea Figure 1: Physical outlook of WT12 Bluegiga Technologies Oy 1 ORDERING INFORMATION Internal chip antenna WT12-A-AI5 WT12-A-AI4 WT12-A-3 WT12-A-HCI21 WT12-A-C (* iWRAP 5.0 firmware iWRAP 4.0 firmware iWRAP 3.0 firmware HCI firmware, BT2.1 + EDR Custom firmware Table 1: Ordering information *) Custom firmware means any standard firmware with custom parameters (like UART baud rate), custom firmware developer by customer or custom firmware developed by Bluegiga for the customer. To order custom firmware you must have a properly filled Custom Firmware Order From and unique ordering code issued by Bluegiga. Contact sales@bluegiga.com for more information. Bluegiga Technologies Oy 2 Block Diagram and Descriptions Figure 2: Block Diagram of WT12 BlueCore04 BlueCore4 is a single chip Bluetooth solution which implements the Bluetooth radio transceiver and also an on chip microcontroller. BlueCore4 implements Bluetooth® 2.1 + EDR (Enhanced Data Rate) and it can deliver data rates up to 3 Mbps. The microcontroller (MCU) on BlueCore04 acts as interrupt controller and event timer run the Bluetooth software stack and control the radio and host interfaces. A 16-bit reduced instruction set computer (RISC) microcontroller is used for low power consumption and efficient use of memory. BlueCore04 has 48Kbytes of on-chip RAM is provided to support the RISC MCU and is shared between the ring buffers used to hold voice/data for each active connection and the general purpose memory required by the Bluetooth stack. Crystal The crystal oscillates at 26MHz. Flash Flash memory is used for storing the Bluetooth protocol stack and Virtual Machine applications. It can also be used as an optional external RAM for memory intensive applications. Balun / filter Combined balun and filter changes the balanced input/output signal of the module to unbalanced signal of the monopole antenna. The filter is a band pass filter (ISM band). Matching Antenna matching components match the antenna to 50 Ohms. Bluegiga Technologies Oy Antenna The antenna is ACX AT3216 chip antenna. USB This is a full speed Universal Serial Bus (USB) interface for communicating with other compatible digital devices. WT12 acts as a USB peripheral, responding to requests from a Master host controller such as a PC. Synchronous Serial Interface This is a synchronous serial port interface (SPI) for interfacing with other digital devices. The SPI port can be used for system debugging. It can also be used for programming the Flash memory. UART This is a standard Universal Asynchronous Receiver Transmitter (UART) interface for communicating with other serial devices. Audio PCM Interface The audio pulse code modulation (PCM) Interface supports continuous transmission and reception of PCM encoded audio data over Bluetooth. Programmable I/O WT12 has a total of 6 digital programmable I/O terminals. These are controlled by firmware running on the device. Reset This can be used to reset WT12. 802.11 Coexistence Interface Dedicated hardware is provided to implement a variety of coexistence schemes. Channel skipping AFH (Adaptive Frequency Hopping), priority signaling, channel signaling and host passing of channel instructions are all supported. The features are configured in firmware. Since the details of some methods are proprietary (e.g. Intel WCS) please contact Bluegiga Technologies for details. Bluegiga Technologies Oy 3 Electrical Characteristics 3.1 Absolute maximum ratings Min -40 -40 -0,3 -0,4 Storage temperature Operating temperature Supply voltage Terminal voltages Output current from PIOS Max 85 85 3,6 Vdd + 0,4 35 Unit °C °C V V mA The module should not continuously run under these conditions. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability and cause permanent damage to the device. Table 2: Absolute maximum ratings 3.2 Recommended operating conditions Min -40 3,1 (1) 0 Operating temperature Supply voltage Terminal voltages Max 85 3,6 Vdd Unit °C V V 1) WT12 operates as low as 2,7 V supply voltage. However, to safely meet the USB specification for minimum voltage for USB data lines, minimum of 3,1 V supply is required. Table 3: Recommended operating conditions 3.3 Terminal characteristics Min Typ Max Unit I/O voltage levels VIL input logic level low -0,4 - 0,8 V VIH input logic level high 0,7Vdd - Vdd + 0,4 V VOL output logic level low - - 0,2 V VOH output logic level high Reset terminal VTH,res threshold voltage Vdd - 0,2 - - V 0,64 0,85 1,5 RIRES input resistance 220 V k CIRES input capacitance Input and tri-state current with Strong pull-up Strong pull-down Weak pull-up Weak pull-down I/O pad leakage current Vdd supply current TX mode RX mode 220 nF -100 10 -5 0,2 -1 -40 40 -1 1 0 -10 100 -0,2 5 1      - - 70 70 mA mA Table 4: Terminal characteristics Bluegiga Technologies Oy 3.4 Current consumption Test conditions: Room temperature, Vdd = 3,3 V, iWRAP firmware OPERATION MODE Peak AVG supply supply Unit current current Notes Peak current at TX mode 70 - mA - Peak current at RX mode IDLE IDLE, Deep Sleep ON IDLE, Deep Sleep ON NOT visible, NOT connectable INQUIRY NAME CALL CONNECT Master CONNECT Slave CONNECT + Sniff, Master CONNECT + Sniff, Slave 70 - 3 1,2 mA mA mA Module is idle Default settings Module is idle - 0,056 mA Module is idle (Minimum consumption), SET BT PAGEMODE 0 2000 1 - 44,7 44,7 44,7 mA mA mA Device discovery with INQUIRY command Name resolution CALL [ADDR] 1101 RFCOMM - 6,2 mA No data was transmitted, Default settings - 22,4 mA No data was transmitted, Default settings - 4,7 4,6 mA mA CONNECT + sniff, Master - 2,3 mA CONNECT + sniff, Slave - 2,3 mA CONNECT + park, Master CONNECT + park, Slave DATA, Master DATA, Slave - 3,1 2,3 31,5 29,2 mA mA mA mA DATA + Sniff, Master - 19,6 mA DATA + Sniff, Slave - 22,6 mA DATA + Sniff, Master - 3,9 mA Connected (SET BT SNIFF 40 20 1 8) Connected (SET BT SNIFF 40 20 1 8) No data transmitted (SET BT SNIFF 1000 20 1 8) No data transmitted (SET BT SNIFF 1000 20 1 8) No data transmittedPark parameter 1000 No data transmittedPark parameter 1000 Data transmitted @ 115200bps Data transmitted @ 115200bps Data transmitted @ 115200bps (SET BT SNIFF 40 20 1 8) Data transmitted @ 115200bps (SET BT SNIFF 40 20 1 8) Data transmitted (SET BT SNIFF 1000 20 1 8) Table 5: Current consumption Bluegiga Technologies Oy 3.5 Radio characteristics and general specifications Operating frequency range Lower quard band Upper quard band Maximum data rate Receiving signal range Receiver IF frequency Transmission power RF input impedance Compliance USB specification Note (2400 ... 2483,5) MHz ISM Band 2 MHz 3,5 MHz 2402 MHz ... 2480 MHz Carrier frequency Modulation method Hopping Specification GFSK (1 Mbps) P/4 DQPSK (2Mbps) 1600 hops/s, 1 MHz channel space Asynchronous, 723.2 kbps / 57.6 kbps GFSK: Synchronous: 433.9 kbps / 433.9 kbps P/4 Asynchronous, 1448.5 kbps / 115.2 kbps DQPSK: Synchronous: 869.7 kbps / 869.7 kbps Asynchronous, 2178.1 kbps / 177.2 kbps 8DQPSK: Synchronous: 1306.9 kbps / 1306.9 kbps -82 to -20 dBm 1.5 MHz Min Max -11 ... -9 dBm +1 ... +3 dBm 50  Bluetooth specification, version 2.0 + EDR USB specification, version 1.1 (USB 2.0 compliant) Table 6: Radio characteristics and general specifications Bluegiga Technologies Oy f = 2402 + k, k = 0...78 Typical condition Center frequency 3.6 Radio Characteristics – Basic Data Rate 3.6.1 Transmitter radio characteristics WT12 meets the Bluetooth v2.1 + EDR specification between -40°C and +85°C. TX output is guaranteed to be unconditionally stable over the guaranteed temperature range. Measurement conditions: T = 20C, Vdd = 3,3V Item Typical value Bluetooth specification Unit Maximum output power1,2 Variation in RF power over temperature range with compensation enabled4 Variation in RF power over temperature range with compensation disabled4 RF power control range RF power range control resolution5 20dB bandwidth for modulated carrier Adjacent channel transmit power F = F0 ± 2MHz6,7 Adjacent channel transmit power F = F0 ± 3MHz6,7 Adjacent channel transmit power F = F0 ± > 3MHz6,7 f1avg Maximum Modulation +2.5 -6 to 4 3 dBm 1.5 - dB 2.0 - dB 35 16 dB 0.5 - dB 780  1000 kHz -40  20 dBm -45  -40 dBm -50  -40 dBm 165 140