FR152

MOSPEC FAST RECOVERY RECTIFIER Voltage rang Current 50 TO 1000 Volts 1 .5 Ampere FEATURES ＊Fast switching for high efficiency ＊Glass Passivated Chip junction ＊Low leakage ＊High temperature soldering guaranteed 260℃/10 seconds, 0.375”(9.5 mm) lead length at 5 lbs(2.3kg) tension MECHANICAL DATA ＊Case：Transfer Molded Plastic ＊Epoxy: UL94V-O rate flame retardant ＊Terminals：Plated axial lead, Solderable Per MIL-STD-202 Method 208 ＊Polarity：Color band denotes cathode end ＊Mounting position: Any ＊Weight： 0.014 ounce. 0.39 gram (approx) FR151 THRU FR157 DO-15 DIM A B C D MILLIMETERS MIN 2.60 25.40 5.80 0.70 MAX 3.60 --7.60 0.90 MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS * Rating at 25℃ ambient temperature unless otherwise specified * Single phase,half wave. 60Hz, resistive or inductive load. * For capacitive load derate current by 20 % Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectifier Forward Current Per Leg TC=55℃ Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz) Maximum Instantaneous Forward Voltage ( IF =1.5 Amp TC = 25℃) Maximum Instantaneous Reverse Current ( Rated DC Voltage, TC = 25℃) ( Rated DC Voltage, TC = 125℃) Reverse Recovery Time (Note 3) Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Junction Temperature Range NOTES: Symbol VRRM VRW M VR VR(RMS) IF(AV) IFSM VF IR Trr Cj Rθ jA TJ , Tstg FR151 FR152 FR153 FR154 FR155 FR156 FR157 50 100 200 400 600 800 1000 Unit V 35 70 140 280 1.5 60 1.3 5.0 200 420 560 700 V A A V uA 150 20 50 -65 to +175 250 500 ns pF ℃/W ℃ 1.Measured at 1.0MHz and applied reverse voltage of 4.0 volts 2.Thermal Resistance from Junction to ambient at .375”(9.5mm)lead length, P.C. board mounted 3.Test conditions: IF = 0.5 A, IR =1.0 , IRR=0.25 A FR151 Thru FR157 FIG-1 TYPICAL FORWARD CHARACTERISITICS AVERAGE FORWARD RECTIFIED CURRENT (Amp.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-3 FORWARD CURRENT DERATING CURVE TJ=25 C Pulse W idth=300 us 1% Duty Cycle O Single Phase Half Wave 60 Hz Resistive or Inductive Load 0.375 “(9.5mm) Lead Length LEAD TEMPERATURE (℃) FIG-4TYPICAL JUNCTION CAPACITANCE FORWARD VOLTAGE (Volts) TJ=25 C F=1 MHz O FIG-2 TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT (uA.) TJ=125 C O TJ=75 C O JUNCTION CAPACITANCE (PF) REVERSE VOLTAGE (Volts.) TJ=25 C O FIG-5PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT (Amp.) 8.3ms Single Half Sine-Wave (JEDEC Method) PERCENT OF PEAK REVERSE VOLTAGE (﹪) NUMBER OF CYCLES AT 60 Hz Set time base for 50/100 ns/cm FIG-6 Reverse Recovery Time Characteristic and Test Circuit Diagram