SC6122

Silan Semiconductors INFRARED REMOTE CONTROL TRANSMITTER DESCRIPTION The SC6122 is a remote control transmitter utilizing CMOS Technology specially designed for use on infrared remote control applications. It is capable of controlling 64 function keys and 3 double keys. SC6122 is housed in a 24-pins SO package. SC6122 FEATURES * CMOS Technology * Low Operating Voltage (VDD=2.0~5.5V) * Using SEL pin, SC6122 can support 128+6 function codes * Customer Code can be selected SOP-24 APPLICATIONS * TV and VCR * Audio Equipment * Air Conditioner * VCD and DVD ROM/Player * Moniputer/Multi-Media Personal Computer System ORDERING INFORMATION SC6122-001 SC6122-002 ROM Content=0 Custom Version PIN CONFIGURATION KI2 KI3 KI4 KI5 KI6 KI7 REM VDD SEL 1 2 3 4 5 6 7 8 9 24 23 22 21 20 KI1 KI0 CCS KI/O0 KI/O1 KI/O2 KI/O3 KI/O4 KI/O5 KI/O6 KI/O7 LMP SC6122 19 18 17 16 15 14 13 OSCO 10 OSCI Vss 11 12 HANGZHOU SILAN MICROELECTRONICS JOINT-STOCK CO.,LTD Rev: 2.2 2002-03-01 1 Silan Semiconductors BLOCK DIAGRAM OSCI OSCO VDD Vss SC6122 11 KI0 KI1 KI2 KI3 KI4 KI5 KI6 KI7 10 8 12 9 SEL 23 OSC Circuit 24 1 2 3 4 22 5 6 21 20 Key Input/Output Scan Circuit CSS Key Input Scan Circuit Timing Generation &Control Circuit Optput Control Circuit 7 REM Code Generation Circuit 13 LMP 19 18 17 16 15 14 KI/O0 KI/O1 KI/O2 KI/O3 KI/O4 KI/O5 KI/O6 KI/O7 ABSOLUTE MAXIMUM RATING (Tamb=25°C, unless otherwise specified) Characteristic Supply Voltage Input Voltage Power Dissipation Storage Temperature Operating Temperature Symbol VDD VIN Pd Tstg Topr Value 6.0 -0.3~VDD 250 -40~+125 -20~+75 Unit V V mW °C °C RECOMMENDED OPERATING CONDITIONS (Tamb=25°C,unless otherwise specified) Characteristic Supply Voltage Oscillation Frequency Input Voltage Custom Code Select Pull-Up Resistance Symbol VDD fosc VIN Rup Min. 2.0 400 0 -- Typ. 3.0 455 -100 Max. 3.3 500 VDD -- Unit V KHz V KΩ HANGZHOU SILAN MICROELECTRONICS JOINT-STOCK CO.,LTD Rev: 2.2 2002-03-01 2 Silan Semiconductors SC6122 Test conditions Fosc =455KHz Fosc =STOP Vo=1.5V Vo=0.3V Vo=2.7V Vo=0.3V VIN =3.0V VIN =0V 0.7 VDD 0 0.7 VDD 0 VIN =3.0V VIN =0V Vo=2.5V Vo=1.7V Pull Up VIN =3.0V Pull Up VIN =0V Pull Down VIN =3.0V Pull Down VIN =0V -3 5 0.5 1.5 1.1 0.2 -15 30 -0.2 2 -5.0 15 -15 1 5 -8.0 30 -30 1.5 30 -0.2 VDD 0.3 VDD VDD 0.4 7 -0.2 1.5 2.5 ELECTRICAL CHARACTERISTICS (Tamb=25°C,VDD=3.0V,unless otherwise specified) Parameter Supply Voltage Current Consumption 1 Current Consumption 2 REM High Level Output Current REM Low Level Output Current LMP High Level Output Current LMP Low Level Output Current KI High Level Input Current KI Low Level Input Current KI High Level Input Voltage KI Low Level Input Voltage KI/O High Level Input Voltage KI/O Low Level Input Voltage KI/O High Level Input Current KI/O Low Level Input Current KI/O High Level Output Current KI/O Low Level Output Current CCS Low Level Input Voltage CCS High Level Input Current CCS Low Level Input Current CCS High Level Input Current CCS Low Level Input Current Symbol VDD IDD1 IDD2 IOH1 IOL1 IOH2 IOL2 IIH1 IIL1 VIH1 VIL1 VIH2 VIL2 IIH2 IIL2 IOH3 IOL3 VIH3 IIH3 IIL3 IIH4 IIL4 Min 2.0 Typ 3.0 0.1 Max 5.5 1.0 1.0 Unit V mA µA mA µA µA mA µA µA V V V V µA µA mA mA V µA µA µA µA PIN DESCRIPTION Pin No. 23,24,1~6 7 8 9 10 11 12 13 21~14 22 Symbol KI0~KI7 REM VDD SEL OSCO OSCI Vss LMP KI/O0~KI/O7 CCS I/O I O -I O I --I/O I Data Output Pin Power Supply Select Pin Oscillator Pin Oscillator Pin Power Supply Description Key Input Pin Nos. 0~7 Output LED Indicator Key Input/Output Pin Nos.0~7 Custom Code Scan Input Pin HANGZHOU SILAN MICROELECTRONICS JOINT-STOCK CO.,LTD Rev: 2.2 2002-03-01 3 Silan Semiconductors FUNCTIONAL DESCRIPTION 1. TRANSMISSION CODE SC6122 The transmission code consists of a leader code, 16-bits custom codes, and 8-bits data codes. The inverse code of the data code is also sent simultaneously. The following diagram shows this one frame construction. C0' C0' C0' C0' C0' C0' C0' C0' C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Leader Code Custom Code 8 bits Custom Code' 8 bits Key Data 8 bits Key Data 8 bits The leader codes consist of a 9ms carrier waveform followed by a 4.5ms OFF waveform. It is used as the leader for the following code. Thus, when reception is configured by a microcomputer, the time relationship between the reception detection and other processes can be managed efficiently. The code uses the PPM (Pulse Position Modulation) Method, with "0" and "1" differentiated by the time between pulses. Each code consists of 8 bits, and simultaneous transmission of the inverse code allows configuration of a system with an extremely low error rate. 2. KEY INPUT MATRIX The Key Input Matrix of SC6122 if given below: KI/O0 KI/O1 KI/O2 KI/O3 KI/O4 KI/O5 KI/O6 KI/O7 KI0 KI1 KI2 KI3 KI4 KI5 KI6 KI7 1 2 3 4 33 34 35 36 5 6 7 8 37 38 39 40 9 10 11 12 41 42 43 44 13 14 15 16 45 46 47 48 17 18 19 20 49 50 51 52 21 22 23 24 53 54 55 56 25 26 27 28 57 58 59 60 29 30 31 32 61 62 63 64 3. KEY INPUT A total of 64 keys can be connected by SC6122 Key Input Pins--KI0~KI7 and the Timing Signal Output Pins KI/O0~KI/O7. Double Key Operation is possible for only Key No.21 in combination with other keys connected to the KI/O5 line namely: Key No.22,23 or 24.thus, only the following key combinations may be used for the double key operation: 1. Key Nos.21 and 22 ; 2. Key Nos.21 and 23 ; 3. Key Nos.21 and 24 HANGZHOU SILAN MICROELECTRONICS JOINT-STOCK CO.,LTD Rev: 2.2 2002-03-01 4 Silan Semiconductors SC6122 Pull-down resistors are connected between the Key Input and Vss Pins. When more than one key (except the double key combinations:K21+22, K21+23, K21+24) are pressed simultaneously, the transmission output stops. Two key inputs are regarded as being pressed simultaneously when the time interval between these two key entries is less than 36ms. The order of priority given to two key inputs with a time interval of more than 36ms is on a First-Pressed-FirstServed or Longer-Pressed-First-Served Basis. When a key is pressed, the custom and data codes are read. 36ms later, the Remote (REM) Output is activated. When the key is kept depressed during this 36ms, one transmission is outputted. If the key is depressed for more than 108ms, then the only the leader code is transmitted continuously. 4. DOUBLE KEY OPERATION Double Key Operation is useful for operations such as tape deck recording. The following table shows the Key Data corresponding to the double keys pressed. Also refer to the Key Input Section. The Double Key operation forms are as follows: Key K21+K22 K21+K23 K21+K24 D0 1 0 1 D1 0 1 1 D2 1 1 1 D3 0 0 0 D4 1 1 1 D5 1 1 1 D6 0 0 0 D7 0/1 0/1 0/1 Note: D7=1 when SEL is connected to VSS, or D7=0 when SEL is connected to VDD. OPERATION K21 push K21 Transmission t >126ms K22 to 24 push D5+K22 to 24 Transmission NO OPERATION K21 K21 Transmission 36ms< t 126ms K22 to 24 K22 to 24 Transmission No Transmission HANGZHOU SILAN MICROELECTRONICS JOINT-STOCK CO.,LTD Rev: 2.2 2002-03-01 5 Silan Semiconductors 5. REMOTE OUTPUT WAVEFORMS The Remote Output Waveforms are given in the diagram below: SC6122 Ex. fosc=455KHz Key ON Min. 36ms 1 58.5 to 76.5ms 108ms 2 3 108ms 1 9ms 4.5ms 13.5ms Leader Code Custom Code Custom Data Code 8bits 8bits Code 18ms to 36ms 58.5ms to 76.5ms Data Code 8bits 27ms 2 0.56ms 9ms 13.5ms 4.5ms 0 1 2.25ms 1 0 0 1 3 1.125ms 9ms 11.25ms 2.25ms 0.56ms Carrier 8.77µs 26.3µs 9ms to 0.56ms Carrier Frequency---Fc=fosc/12=38KHz HANGZHOU SILAN MICROELECTRONICS JOINT-STOCK CO.,LTD Rev: 2.2 2002-03-01 6 Silan Semiconductors SC6122 KEYS DATA CODE The Keys Data Code is given in the table below. SC6122 Data Code KI/O D0 0 1 0 1 0 Key No. K1 K2 K3 K4 K5 K6 K7 K8 K9 K10 K11 K12 K13 K14 K15 K16 K17 K18 K19 K20 K21 K22 K23 K24 K25 K26 K27 K28 K29 K30 K31 K32 • • • • • • • • • • • • • • Connection KI0 • • • • KI1 KI2 KI3 D1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 D2 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 D3 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 D4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D7 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 KI/O0 • • KI/O1 1 0 1 0 • • KI/O2 1 0 1 0 • • KI/O3 1 0 1 0 • • KI/O4 1 0 1 0 • • KI/O5 1 0 1 0 • • KI/O6 1 0 1 0 • • KI/O7 1 0 1 (to be continued) HANGZHOU SILAN MICROELECTRONICS JOINT-STOCK CO.,LTD Rev: 2.2 2002-03-01 7 Silan Semiconductors (continued) SC6122 Data Code KI/O D0 0 1 0 1 0 Key No. K33 K34 K35 K36 K37 K38 K39 K40 K41 K42 K43 K44 K45 K46 K47 K48 K49 K50 K51 K52 K53 K54 K55 K56 K57 K58 K59 K60 K61 K62 K63 K64 • • • • • • • • • • • • • • Connection KI4 • • • • KI5 KI6 KI7 D1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 D2 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 D3 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 D4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D7 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1 KI/O0 • • KI/O1 1 0 1 0 • • KI/O2 1 0 1 0 • • KI/O3 1 0 1 0 • • KI/O4 1 0 1 0 • • KI/O5 1 0 1 0 • • KI/O6 1 0 1 0 • • KI/O7 1 0 1 Note: D7=1 when SEL is connected to VSS, or D7=0 when SEL is connected to VDD. HANGZHOU SILAN MICROELECTRONICS JOINT-STOCK CO.,LTD Rev: 2.2 2002-03-01 8 Silan Semiconductors TYPICAL APPLICATION CIRCUIT VDD VDD IR LED 200pF 455KHz 200pF 47 270 1 SC6122 LED 11 23 24 1 2 3 4 5 6 KI0 KI1 OSCI 10 OSCO 8 VDD 13 LMP 7 REM KI2 SEL KI3 KI4 KI5 KI6 KI7 CCS KI/O0 KI/O1 KI/O2 KI/O3 KI/O4 KI/O5 KI/O6 KI/O7 SC6122 VSS 21 20 19 18 17 16 15 14 IN4148 IN4148 IN4148 IN4148 IN4148 IN4148 IN4148 100K 100K 100K 100K 100K 100K 100K 100K Note:1. Two capacitance connect with Vcc should as near as possible. 2. The line between two capacitance and Vcc and ground should as short as possible. HANGZHOU SILAN MICROELECTRONICS JOINT-STOCK CO.,LTD Rev: 2.2 2002-03-01 9 ¡ For Custom Code Selection VDD IN4148 ­ 47 F 0.1 F 470 ¡ VDD ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ­ ­ F 9 12 22 Silan Semiconductors CHIP TOPOGRAPHY SC6122 Size: 1.84 x 1.46 mm 2 PAD COORDINATES (Unit: µm) No. Symbol X Y No. Symbol X Y 1 2 3 4 5 6 7 8 9 10 11 12 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 -602.80 -602.80 -350.70 -220.90 -89.50 41.00 171.40 347.90 477.80 608.00 607.20 607.20 -322.10 -452.10 -452.10 -452.10 -452.10 -452.10 -452.10 -452.10 -452.10 -452.10 -176.00 -44.60 13 14 15 16 17 18 19 20 21 22 23 24 P13 P14 P15 P16 P17 P18 P19 P20 P21 P22 P23 P24 605.70 542.00 403.50 160.40 12.50 -230.30 -361.30 -602.50 -607.50 -602.80 -602.80 -602.80 217.90 452.00 452.00 452.00 452.00 452.00 451.90 451.90 252.40 68.50 -61.20 -191.50 Note: The original point of the coordinate is the die center. HANGZHOU SILAN MICROELECTRONICS JOINT-STOCK CO.,LTD Rev: 2.2 2002-03-01 10 Silan Semiconductors PCB WIRE LAYOUT SCHEMATIC: SC6122 Transmitting tube output ground line The transmitting tube ground line and IC ground line should layout separated or overstriking ground line. The above IC only use to hint, not to specified. Note: * In wire layout, the power filter capacitor should near to IC. * In wire layout, should avoid power line and ground line too long. * Recommended infrared transmit unit and IC ground line should layout separated, or overstriking lines. * Recommended triode use 9014. HANGZHOU SILAN MICROELECTRONICS JOINT-STOCK CO.,LTD Rev: 2.2 2002-03-01 ¡ * The emitter of triode connect 1 resistor at least. 11 Silan Semiconductors PACKAGE OUTLINE SC6122 Unit: mm SOP-24-375-1.27 1.27 13.97 HANGZHOU SILAN MICROELECTRONICS JOINT-STOCK CO.,LTD Rev: 2.2 2002-03-01 B 15.34 0.25 12 B 0.40 0.1 3.10MAX 0.25 B 0.05 9.525(375) BB 10.2 0.4 7.6 0.3 Silan Semiconductors Attach Revision History Data 2000.12.31 2001.12.12 SC6122 REV 2.0 2.1 Description Change name of company in page footer Page Modify the “Typical application circuit” 2002.03.01 2.2 Add the “PCB wire layout schematic” Modify the “Package outline” 9 11 12 HANGZHOU SILAN MICROELECTRONICS JOINT-STOCK CO.,LTD Rev: 2.2 2002-03-01 13