SII9187

Product Brief SiI9187 PinnaClear™ Port Processor Featuring four HDMI 1.3 input ports with five EDID RAMs Silicon Image’s PinnaClear port processors are a new generation of highly innovative yet cost-effective HDMI solutions for price-sensitive, mid-range DTVs. PinnaClear port processors output directly to the integrated HDMI inputs in DTV SoCs, allowing manufacturers to differentiate their products by focusing their R&D efforts on video processing or • Built-in HDCP Applications • LCD, plasma and projection DTVs Key Features • Four HDMI 1.3 input ports other proprietary advantages. decryption engines • Five EDID RAMs for The SiI9187 processor’s five integrated Extended Display Identification Data (EDID) RAMs eliminate external EPROM components, lower BOM costs and simplify board design. Source devices can read EDID when DTVs are in standby mode or when the DTV is unplugged from the wall. EDID data is stored in NVRAM and downloaded into the RAM when a source device is connected to the DTV. All SiI9187 ports support the HDMI 1.3 specification and Deep Color -- the highest quality protected digital video over a single cable -- and 12 bits of video at 1080p/60Hz or 1080i/120Hz resolutions. The SiI9187 port processor also comes pre-programmed with HDCP keys to simplify manufacturing and provide the highest level of HDCP key security. The SiI9187’s built-in adaptive equalizer pro- HDMI & VGA ports • Integrated CEC • Integrated NVRAM stores EDID data • Single 3.3V power supply • Built-in adaptive equalizer provides long cable support The SiI9187’s integrated CEC eliminates the need for the external microprocessor to manage the low-level protocol. The CEC API simplifies the firmware development of CEC commands. Using power islands, CEC and EDID functions are supported in extremely low power. vides long cable support, even at Deep Color resolutions. This patented technology enables the SiI9187 to work reliably with noisy signals and multiple sources, making the sink devices highly interoperable. SiI9187 Application Diagram SiI9187 SiI9187 Starter Kit (CP9187HDMI) Contents include: Hardware • SiI9187 port processor board • HDMI to HDMI cable Software • Simon receiver software tool Documentation • User's guide • Schematics • Bill of materials (BOM) Features Industry-Standard Compliance Content Protection • HDMI 1.3 • DVI 1.0 • EIA/CEA-861D • HDCP 1.1 • TMDS Transmitter @ 225MHz HDMI Inputs • Integrated HDCP cipher engine • Built-in HDCP BIST • Pre-programmed HDCP keys: - Simplify manufacturing process - Provide extremely secure solution - Lower system, manufacturing costs • Built-in HDCP self-test Power Management • Four HDMI inputs • Supports DTV resolutions up to 1080p @ 60Hz or 720p/1080i @ 120Hz with 36-bit color depth • Integrated EDID for each HDMI Port and VGA port • Integrated CEC Consumer Electronics Control System Operation Package • Low stand by power mode with auxiliary power mode for CEC and EDID support • 72-pin 10x10mm QFN • Pin compatible with Silicon Image’s SiI9285 and SiI9287 port processors • Register-programmable via slave I2C interface SiI9187 Block Diagram Silicon Image, Inc. 1060 E. Arques Avenue Sunnyvale, CA 94085 T 408.616.4000 F 408.830.9530 www.siliconimage.com Copyright © 2008 Silicon Image, Inc. All rights reserved. Silicon Image, the Silicon Image logo, SiI9187, PinnaClear, and the PinnaClear logo are trademarks or registered trademarks of Silicon Image, Inc. in the United States and/or other countries. HDMI, the HDMI logo, High-Definition Multimedia Interface, are trademarks or registered trademarks in the United States and/or other countries and are used under license from HDMI Licensing, LLC. All other trademarks are the property of their respective owner in the United States and/or other countries. Product specifications are subject to change without notice. Part Number: SiI9187CTU SiI-PB-1045 rev1 9/08