SiI9287BCNU

Data Brief SiI9287B HDMI Port Processor with InstaPort Viewing Technology Data Brief Document # SiI-DB-1070-A SiI9287B HDMI Port Processor with InstaPort Viewing Technology Data Brief Silicon Image, Inc. September 2009 Copyright Notice Copyright © 2009 Silicon Image, Inc. All rights reserved. These materials contain proprietary and confidential information (including trade secrets, copyright, and other interests) of Silicon Image, Inc. You may not use these materials except only for your bona fide non-commercial evaluation of your potential purchase of products and/or services from Silicon Image or its affiliates, and/or only in connection with your purchase of products and/or services from Silicon Image or its affiliates, and only in accordance with the terms and conditions herein. You have no right to copy, modify, transfer, sublicense, publicly display, create derivative works of or distribute these materials, or otherwise make these materials available, in whole or in part, to any third party. Patents The subject matter described herein contains one or more inventions claimed in patents and / or patents pending owned by Silicon Image, Inc., including but not limited to the inventions claimed in US patents #6,914,637, #6,151,334, #6,026,124, #5,974,464 and #5,825,824. Trademark Acknowledgment Silicon Image™, VastLane™, SteelVine™, PinnaClear™, Simplay™, Simplay HD™, Satalink™, Mobile Highdefinition Link™, MHL™, InstaPort™, TMDS™, and LiquidHD™ are trademarks or registered trademarks of Silicon Image, Inc. in the United States and other countries. HDMI™, the HDMI logo and High-Definition Multimedia Interface™ are trademarks or registered trademarks of, and are used under license from, HDMI Licensing, LLC. x.v.Color™ is a trademark of Sony Corporation. Further Information The SiI9287B port processors include an implementation of Silicon Image Mobile High-Definition Link (MHL™) technology—hereinafter referred to simply as MHL technology. This implementation conforms to the 0.71 draft specification and will not be compatible with future revisions of the specification. To request other materials, detailed hardware and software guides, and additional information, contact your local Silicon Image, Inc. sales office or visit the Silicon Image, Inc. web site at www.siliconimage.com. Information about obtaining licenses required for using HDMI and HDCP technologies is available from www.hdmi.org and www.digital-cp.com. © 2009 Silicon Image, Inc. All rights reserved. ii © 2009 Silicon Image, Inc. All rights reserved. SiI-DB-1070-A SiI9287B HDMI Port Processor with InstaPort Viewing Technology Data Brief . Introduction The SiI9287B HDMI Port Processor with InstaPort Viewing Technology is the second generation of HDMI devices that support the HDMI Specification. With four HDMI/Mobile HD Link (MHL) inputs and a single output, the SiI9287B port processor enhances the functionality of digital TVs using single system on a chip (SoC) solutions with integrated HDMI receivers. The port processor provides a simple, low-cost method of retransmitting digital audio and video to give consumers a truly all-digital experience. Built-in backward compatibility with DVI 1.0 allows HDMI systems to connect to any DVI 1.0 source. Control Capability • Consumer Electronics Control (CEC) interface incorporates an HDMI-compliant CEC I/O and an integrated CEC Programming Interface (CPI); these simplify design and lower costs and software overhead Integrated EDID and DDC support for 4 HDMI/DVI ports and 1 VGA port with a 256-byte NVRAM shared between ports that loads into SRAM separate 256-byte SRAM for each of 5 ports Individual control of Hot Plug Detect (HPD) for each of the 4 HDMI/DVI ports 5-volt detect to help speed soft mute of audio while plugging and unplugging Controllable by the local I2C bus • • • • Features The SiI9287B device brings cutting edge innovations, such as: • InstaPort™ viewing technology that reduces port switching time to less than one second • Enhanced cable equalization for long cable support, even at Deep Color resolutions that enables the SiI9287B device to work with noisy signals and many sources, making the sink devices highly interoperable • MHL for connection to mobile devices • Integrated EDID and CEC functions • Improved ESD protection on all signals connected to the HDMI connector. Power Management • • • • • Flexible power management provides extremely low standby power consumption Standby power can be supplied from an HDMI 5-V signal or from a separate standby power pin Single power 3.3-V source Integrated 5 V to 3.3 V Voltage regulator Package 72-pin, 10 mm x 10 mm, 0.5 mm pitch QFN package with enhanced ePad™. HDMI Inputs and Output Four HDMI input ports and single output port support: • HDMI, HDCP, and DVI compatibility • TMDS® cores run at 25–225 MHz • Supports video resolutions up to 1080p, 60 Hz, 12bit or 720p/1080i, 120 Hz, 12-bit Figure 1. Typical Application of SiI9287B HDMI Port Processor SiI-DB-1070-A © 2009 Silicon Image, Inc. All rights reserved. 1 SiI9287B HDMI Port Processor with InstaPort Viewing Technology Data Brief Silicon Image, Inc. Pin Diagram Figure 2 shows the pin diagram for the SiI9287B port processor. Pin names are generalized by type for this document. The list below the diagram describes the purpose of each type. . Figure 2. Pin Diagram (Top View) 2 © 2009 Silicon Image, Inc. All rights reserved. SiI-DB-1070-A SiI9287B HDMI Port Processor with InstaPort Viewing Technology Data Brief Silicon Image, Inc. Package Information ePad Requirements The SiI9287B HDMI Port Processor with InstaPort Viewing Technology is packaged in a 72-pin 10 mm x 10 mm QFN package with an ExposedPad™ (ePad), used both for electrical connectivity and for improved thermal transfer characteristics. The ePad dimensions are 4.7 mm x 4.7 mm with a tolerance of ±0.15 mm. Soldering of the ePad is required to meet package power dissipation requirements at full speed operation, and to correctly connect the chip circuitry to electrical ground. Note: The ePad must be soldered to an electrically grounded plane on the PCB; it must not be electrically connected to any other voltage level except ground. A clearance of at least 0.25 mm should be designed on the PCB between the edge of the ePad and the inner edges of the lead pads to avoid electrical shorts. The thermal land area on the PCB can use thermal vias to improve heat removal from the package. These thermal vias can double as ground connections, attaching internally in the PCB to the ground plane. An array of vias can be designed into the PCB beneath the package. For optimum thermal performance, Silicon Image recommends that the via diameter be 12 to 13 mils (0.30 to 0.33 mm) and the via barrel be plated with 1-ounce copper to plug the via. This plating helps avoid solder wicking inside the via during the soldering process, which can result in voids in solder between the exposed pad and the thermal land. If the copper plating does not plug the vias, the thermal vias can be tented with solder mask on the top surface of the PCB to avoid solder wicking inside the via during assembly. The solder mask diameter should be at least 4 mils (0.1 mm) larger than the via diameter. Package stand-off is also a consideration. For a nominal stand-off of approximately 0.1 mm the stencil thickness of 5 to 8 mils should provide a good solder joint between the ePad and the thermal land. Figure 3 on the next page shows the package dimensions of the SiI9287B package. SiI-DB-1070-A © 2009 Silicon Image, Inc. All rights reserved. 3 SiI9287B HDMI Port Processor with InstaPort Viewing Technology Data Brief Silicon Image, Inc. Package Dimensions These drawings are not to scale. 0.10 C B Figure 3. Package Diagram JEDEC Package Code MO-220 Item A A1 A2 A3 D E D1 E1 Description Thickness Stand-off Body thickness Base thickness Footprint Footprint Body size Body size Min Typ Max — 0.00 — 0.85 0.90 0.01 0.05 0.65 0.70 0.20 REF 10.00 BSC 10.00 BSC 9.75 BSC 9.75 BSC Item D2 E2 b e K L θ Description ePad size ePad size Plated lead width Lead pitch ePad-to-pin clearance Lead foot length Lead foot angle Min Typ Max 4.55 4.55 0.18 0.20 0.30 — 4.70 4.70 0.23 0.50 BSC — 0.40 — 4.85 4.85 0.30 — 0.50 12° 4 © 2009 Silicon Image, Inc. All rights reserved. SiI-DB-1070-A SiI9287B HDMI Port Processor with InstaPort Viewing Technology Data Brief Silicon Image, Inc. Marking Specification This drawing is not to scale. Figure 4. Marking Diagram Ordering Information Production Part Numbers: Device Standard Part Number SiI9287BCNU The universal package may be used in lead-free and ordinary process lines. SiI-DB-1070-A © 2009 Silicon Image, Inc. All rights reserved. 5 SiI9287B HDMI Port Processor with InstaPort Viewing Technology Data Brief Silicon Image, Inc. Disclaimers These materials are provided on an “AS IS” basis. Silicon Image, Inc. and its affiliates disclaim all representations and warranties (express, implied, statutory or otherwise), including but not limited to: (i) all implied warranties of merchantability, fitness for a particular purpose, and/or non-infringement of third party rights; (ii) all warranties arising out of course-of-dealing, usage, and/or trade; and (iii) all warranties that the information or results provided in, or that may be obtained from use of, the materials are accurate, reliable, complete, up-to-date, or produce specific outcomes. Silicon Image, Inc. and its affiliates assume no liability or responsibility for any errors or omissions in these materials, makes no commitment or warranty to correct any such errors or omissions or update or keep current the information contained in these materials, and expressly disclaims all direct, indirect, special, incidental, consequential, reliance and punitive damages, including WITHOUT LIMITATION any loss of profits arising out of your access to, use or interpretation of, or actions taken or not taken based on the content of these materials. Silicon Image, Inc. and its affiliates reserve the right, without notice, to periodically modify the information in these materials, and to add to, delete, and/or change any of this information. Notwithstanding the foregoing, these materials shall not, in the absence of authorization under U.S. and local law and regulations, as required, be used by or exported or re-exported to (i) any U.S. sanctioned or embargoed country, or to nationals or residents of such countries; or (ii) any person, entity, organization or other party identified on the U.S. Department of Commerce's Denied Persons or Entity List, the U.S. Department of Treasury's Specially Designated Nationals or Blocked Persons List, or the Department of State's Debarred Parties List, as published and revised from time to time; (iii) any party engaged in nuclear, chemical/biological weapons or missile proliferation activities; or (iv) any party for use in the design, development, or production of rocket systems or unmanned air vehicles. Products and Services The products and services described in these materials, and any other information, services, designs, know-how and/or products provided by Silicon Image, Inc. and/or its affiliates are provided on as “AS IS” basis, except to the extent that Silicon Image, Inc. and/or its affiliates provides an applicable written limited warranty in its standard form license agreements, standard Terms and Conditions of Sale and Service or its other applicable standard form agreements, in which case such limited warranty shall apply and shall govern in lieu of all other warranties (express, statutory, or implied). EXCEPT FOR SUCH LIMITED WARRANTY, SILICON IMAGE, INC. AND ITS AFFILIATES DISCLAIM ALL REPRESENTATIONS AND WARRANTIES (EXPRESS, IMPLIED, STATUTORY OR OTHERWISE), REGARDING THE INFORMATION, SERVICES, DESIGNS, KNOW-HOW AND PRODUCTS PROVIDED BY SILICON IMAGE, INC. AND/OR ITS AFFILIATES, INCLUDING BUT NOT LIMITED TO, ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND/OR NONINFRINGEMENT OF THIRD PARTY RIGHTS. YOU ACKNOWLEDGE AND AGREE THAT SUCH INFORMATION, SERVICES, DESIGNS, KNOW-HOW AND PRODUCTS HAVE NOT BEEN DESIGNED, TESTED, OR MANUFACTURED FOR USE OR RESALE IN SYSTEMS WHERE THE FAILURE, MALFUNCTION, OR ANY INACCURACY OF THESE ITEMS CARRIES A RISK OF DEATH OR SERIOUS BODILY INJURY, INCLUDING, BUT NOT LIMITED TO, USE IN NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION, EMERGENCY SYSTEMS, OR OTHER SYSTEMS WITH A SIMILAR DEGREE OF POTENTIAL HAZARD. NO PERSON IS AUTHORIZED TO MAKE ANY OTHER WARRANTY OR REPRESENTATION CONCERNING THE PERFORMANCE OF THE INFORMATION, PRODUCTS, KNOWHOW, DESIGNS OR SERVICES OTHER THAN AS PROVIDED IN THESE TERMS AND CONDITIONS. 1060 E. Arques Avenue Sunnyvale, CA 94085 T 408.616.4000 F 408.830.9530 www.siliconimage.com 6 © 2009 Silicon Image, Inc. All rights reserved. SiI-DB-1070-A