71-0.2

China Electronics Technology Group Corporation No.26 Research Institute 71MHz SAW Filter 0.2MHz Bandwidth Part Number: UE71-0.2 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 2.3 dB Bandwidth 2.5 dB Bandwidth 3 dB Bandwidth 45 dB Bandwidth Passband Variation Group Delay Variation(f0±0.1MHz) Absolute Delay f0±0.4MHz Ultimate Rejection f0±0.6MHz f0±1MHz~f0±5MHz Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. 3. 4. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz dB nsec usec dB dB dB KHz/°C °C °C °C V dBm - Minimum 69.99 0.2 45 55 60 Typical 71 17.7 0.21 0.22 0.24 0.74 0.1 150 3.72 54 58 61 0.07 Qz 25 Maximum 70.016 21 0.8 0.5 500 4 - -40 -45 - 0 1C +85 +105 10 DIP3616 (36.0x16.0x5.0mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. UE71-0.2 2011-02-22 2.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 71MHz SAW Filter 0.2MHz Bandwidth Part Number: UE71-0.2 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration Source/Load Impedance=50 ohm INPUT 50Ω OUTPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 36.00±0.50 16.00±0.50 Pad Configuration: Input Output 3 4 71-0.2 Ground All Others 9.30±0.50 6.00-φ0.80±0.10 4.80±0.50 Marking Configuration: 1) 71-0.2: Part Number 10.00±0.50 1 4 2 5 3 6 16.00±0.50 Package: DIP3616 Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. UE71-0.2 2011-02-22 2.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 71MHz SAW Filter 0.2MHz Bandwidth Part Number: UE71-0.2 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -7.7443 -16.2443 Passband Response Type Performance -17.7443 -16.7443 -27.7443 -17.2443 -37.7443 -17.7443 -47.7443 A m plitude ripple(dB ) 69 69.5 70 70.5 71 Frequency(MHz) 71.5 72 72.5 73 73.5 M agnitude(dB ) -57.7443 -18.2443 -67.7443 -18.7443 -77.7443 -19.2443 -87.7443 -19.7443 -97.7443 -107.7443 68.5 -20.2443 70.7 70.8 70.9 71 Frequency(MHz) 71.1 71.2 71.3 Horizontal: 0.5MHz/Div Vertical: 10dB/Div Horizontal: 0.1MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±0.1MHz) Type Performance 5000 5 Phase Linearity(f0±0.1MHz) Type Performance 4 4500 3 2 G roup Delay T im e(ns ) 4000 X: 71 Y: 3713 1 Degree(deg) X: 70.9 Y: 3762 X: 71.1 Y: 3810 X: 70.9 Y: -0.0635 X: 71 Y: 0.3176 X: 71.1 Y: -0.4901 0 3500 -1 -2 3000 -3 -4 2500 70.5 70.6 70.7 70.8 70.9 71 Frequency(MHz) 71.1 71.2 71.3 71.4 71.5 -5 70.5 70.6 70.7 70.8 70.9 71 Frequency(MHz) 71.1 71.2 71.3 71.4 71.5 Horizontal: 0.1MHz/Div Vertical: 500ns/Div Horizontal: 0.1MHz/Div Vertical: 1deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 0.0 5.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. UE71-0.2 2011-02-22 2.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com