93002

China Electronics Technology Group Corporation No.26 Research Institute 930MHz SAW Filter 26MHz Bandwidth Part Number: LBT93002 www.sipatsaw.com SIPAT Co., Ltd. Features For RF SAW filter Single-ended operation Ceramic Surface Mount Package Small size No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1 dB Bandwidth 20 dB Bandwidth Passband Variation Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. 3. 4. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz dB dB KHz/°C °C °C °C V dBm - Minimum 26 - Typical 930 2.4 31.13 52.74 0.6 31 -29.76 42LT 25 Maximum 3.5 57 - -40 -45 - 0 1A +85 +105 10 SMD3.8*3.8 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT93002 2008-09-24 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 930MHz SAW Filter 26MHz Bandwidth Part Number: LBT93002 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration Source/Load Impedance=50 ohm INPUT 50Ω OUTPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 3.80 0.2 Pad Configuration: SIPAT 93002 XXYYZZ Input: 3.80 0.2 2 6 1.5MAX Package: SMD3.8*3.8 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 1 2 3 1.90 6 5 1.27 4 1.80 Output: 5 Ground: All Others Fax: +86-23-62808382 5 4 2 3 Marking Configuration: 1) •: Pad Number 1 Index 2) SIPAT: Manufacturer Name 1 3) 93002: Part Number 4) XXYY: Date(Year/month) 5) ZZ: Identified Code 0.60 Unit: mm Part Number Rev. Date Ver. LBT93002 2008-09-24 1.0 Page 2/3 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 930MHz SAW Filter 26MHz Bandwidth Part Number: LBT93002 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance 7.5693 -2.4307 -12.4307 -1.9307 -0.9307 Passband Respond Type Performance -1.4307 -22.4307 Magnitude(dB) Amplitude ripple(dB) -32.4307 -42.4307 -52.4307 -62.4307 -2.4307 -2.9307 -3.4307 -3.9307 -72.4307 -82.4307 -92.4307 840 860 880 900 920 940 960 Frequency(MHz) 980 1000 1020 -4.4307 -4.9307 900 910 920 930 Frequency(MHz) 940 950 960 Horizontal: 20MHz/Div Vertical: 10dB/Div Horizontal: 10MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±2.5MHz) Type Performance 120 150 Phase Linearity(f0±2.5MHz) Type Performance 100 100 80 50 60 Group Delay Time(ns) X: 917 Y: 54.99 40 X: 930 Y: 33.88 Degree(deg) X: 943 Y: 35.78 0 X: 917 Y: 10.46 X: 930 Y: -5.313 X: 943 Y: 10.43 20 -50 0 -100 -20 -150 -40 905 910 915 920 925 930 Frequency(MHz) 935 940 945 950 955 -200 905 910 915 920 925 930 Frequency(MHz) 935 940 945 950 955 Horizontal: 5MHz/Div Vertical: 20ns/Div Horizontal: 5MHz/Div Vertical: 50deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 0.0 ∞ 0.0 5.0 0.2 0.5 1.0 2.0 5.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT93002 2008-09-24 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com