LBN04101

China Electronics Technology Group Corporation No.26 Research Institute 40.96MHz SAW Filter 9MHz Bandwidth Part Number: LBN04101 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.2 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth 40 dB Bandwidth Passband Variation(f0±4.5MHz) Phase Linearity(f0±4.5MHz) Absolute Delay Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz dB deg usec dB KHz/°C °C V dBm - Minimum 40.86 8.9 42 Typical 40.96 26.4 8.77 9 9.74 9.77 1 7 3.7 48 -3.9 YZ LN 25 0 Maximum 41.06 28 9.8 1.2 4 - - 1A 10 DIP3512 (35.0x12.8x4.7) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN04101 2011-06-27 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 40.96MHz SAW Filter 9MHz Bandwidth Part Number: LBN04101 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration L1=390nH INPUT 50 L1 1 5 OUTPUT 50 Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 Pad Configuration: 12.80 0.50 SIPAT LBN04101 XXYYZZ Input Output 1 5 Ground 2,3,4,6 4.70 0.50 4.50 0.50 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN04101: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.50 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.50 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBN04101 2011-06-27 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 40.96MHz SAW Filter 9MHz Bandwidth Part Number: LBN04101 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -16.366 -24.866 Passband Response Type Performance -26.366 -25.366 -36.366 -25.866 -46.366 -26.366 Amplitude ripple(dB) 20 25 30 35 40 45 Frequency(MHz) 50 55 60 65 -56.366 Magnitude(dB) -66.366 -26.866 -76.366 -27.366 -86.366 -27.866 -96.366 -28.366 -106.366 -116.366 -28.866 32 34 36 38 40 42 Frequency(MHz) 44 46 48 50 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 2MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±4.5MHz) Type Performance 4400 30 Phase Linearity(f0±4.5MHz) Type Performance 4200 20 4000 10 Group Delay Time(ns) X: 45.46 Y: 5.154 Degree(deg) 3800 X: 40.96 Y: 3735 X: 40.96 Y: 1.613 0 X: 36.46 Y: -2.18 X: 36.46 Y: 3711 3600 X: 45.46 Y: 3704 -10 3400 -20 3200 3000 34 36 38 40 42 Frequency(MHz) 44 46 48 -30 34 36 38 40 42 Frequency(MHz) 44 46 48 Horizontal: 2MHz/Div Vertical: 200ns/Div Horizontal: 2MHz/Div Vertical: 10deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN04101 2011-06-27 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com