LBN09024

China Electronics Technology Group Corporation No.26 Research Institute 90MHz SAW Filter 16MHz Bandwidth Part Number: LBN09024 www. sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 3 dB Bandwidth Passband Variation Absolute Delay f0±8.45MHz f0±8.65MHz Ultimate Rejection f0±9.05MHz f0±13.05MHz f0±15MHz Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz dB usec dB dB dB dB dB KHz/°C °C °C °C V dBm - Minimum 89.9 16 35 45 50 55 55 Typical 90 25.7 16.12 0.7 3.63 44 57 55 60 60 -8.46 YZ LN 25 Maximum 90.1 27 1.2 4 - -40 -45 0 +85 +105 - 1 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN09024 2008-01-08 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 90MHz SAW Filter 16MHz Bandwidth Part Number: LBN09024 www. sipatsaw.com SIPAT Co., Ltd. Matching Configuration L1=L2=47nH INPUT 50Ω L1 L2 OUTPUT 50Ω Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.5 12.80 0.5 SIPAT LBN09024 07XX Pad Configuration: Input Output 1 5 Ground All Others 4.7 4.5 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN09024: Part Number 3) 07XX: Date Code 0.45 0.05 2.54 0.2 7.62 0.2 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.2 2.54 0.2 Unit: mm Part Number Rev. Date Ver. LBN09024 2008-01-08 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 90MHz SAW Filter 16MHz Bandwidth Part Number: LBN09024 www. sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -15.7149 -25.7149 -35.7149 -25.2149 -24.2149 Passband Respond -24.7149 -45.7149 Magnitude(dB) -55.7149 -65.7149 -75.7149 -85.7149 -27.2149 -25.7149 -26.2149 -26.7149 -95.7149 -105.7149 -115.7149 65 -27.7149 70 75 80 85 90 95 Frequency(MHz) 100 105 110 115 80 85 90 95 100 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±8MHz) Type Performance 3800 10 3750 Phase Linearity(f0±8MHz) Type Performance 3700 5 X: 82 Y: 1.853 X: 98 Y: 3.093 Group Delay Time(ns) 3650 X: 82 Y: 3642 Degree(deg) 0 X: 90 Y: -0.6553 3600 X: 90 Y: 3616 X: 98 Y: 3561 3550 -5 3500 -10 3450 -15 3400 80 85 90 Frequency(MHz) 95 100 80 85 90 Frequency(MHz) 95 100 Horizontal: 5MHz/Div Vertical: 50ns/Div Horizontal: 5MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN09024 2008-01-08 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com