LBN09025

China Electronics Technology Group Corporation No.26 Research Institute 90MHz SAW Filter 24MHz Bandwidth Part Number: LBN09025 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 2dB Bandwidth 3 dB Bandwidth 40 dB Bandwidth Passband Variation Absolute Delay f0±12.4MHz Ultimate Rejection f0±12.6MHz f0±13MHz f0±17MHz Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. 3. 4. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz dB usec dB dB dB dB KHz/°C °C °C °C V dBm - Minimum 89.875 24 25 40 50 50 Typical 90 33.4 24.02 24.14 24.82 0.7 3.83 36 57 54 53 -8.46 YZ LN 25 Maximum 90.125 38 1.5 4 - -40 -45 - 0 1 +85 +105 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN09025 2008-07-07 1.0 Page 1/3 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 90MHz SAW Filter 24MHz Bandwidth Part Number: LBN09025 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration Source/Load Impedance=50 ohm INPUT 50Ω OUTPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 35.00 0.5 12.80 0.5 SIPAT LBN09025 XXYYZZ Pad Configuration: Input Output 1 5 Ground All Others 4.7 4.5 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN09025: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.2 7.62 0.2 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.2 2.54 0.2 Unit: mm Part Number Rev. Date Ver. LBN09025 2008-07-07 1.0 Page 2/3 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 90MHz SAW Filter 24MHz Bandwidth Part Number: LBN09025 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -23.5686 -33.5686 -43.5686 -33.0686 -32.0686 Passband Respond Type Performance -32.5686 -53.5686 Magnitude(dB) Amplitude ripple(dB) -63.5686 -73.5686 -83.5686 -93.5686 -33.5686 -34.0686 -34.5686 -35.0686 -103.5686 -113.5686 -123.5686 50 60 70 80 90 100 Frequency(MHz) 110 120 130 -35.5686 -36.0686 65 70 75 80 85 90 Frequency(MHz) 95 100 105 110 115 Horizontal: 10MHz/Div Vertical: 10dB/Div Horizontal: 5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±11.6MHz) Type Performance 4000 50 Phase Linearity(f0±11.6MHz) Type Performance 40 3950 30 3900 20 X: 78.4 Y: 3842 3850 Group Delay Time(ns) X: 101.6 Y: 3826 X: 90 Y: 3823 10 X: 78.4 Y: 3.869 X: 101.6 Y: 4.066 X: 90 Y: -0.6171 3800 Degree(deg) 95 100 105 110 0 -10 3750 -20 3700 -30 -40 3650 -50 3600 70 75 80 85 90 Frequency(MHz) -60 70 75 80 85 90 Frequency(MHz) 95 100 105 110 Horizontal: 5MHz/Div Vertical: 50ns/Div Horizontal: 5MHz/Div Vertical: 10deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 0.0 ∞ 0.0 5.0 0.2 0.5 1.0 2.0 5.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN09025 2008-07-07 1.0 Page 3/3 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com