LBN11547_09

China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 24MHz Bandwidth Part Number: LBN11547 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 3dB Bandwidth 30 dB Bandwidth 40 dB Bandwidth 50 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz dB usec dB KHz/°C °C °C °C V dBm - Minimum 114.92 24 - Typical 115 31.2 24.09 24.73 24.86 24.98 Maximum 115.08 33 24.8 25.2 1.5 4 - 50 1 3.51 50 -10.81 YZ LN 25 -40 -45 0 +85 +105 - 1A 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN11547 2009-08-14 2.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 24MHz Bandwidth Part Number: LBN11547 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration L1=56nH L1 INPUT 50Ω OUTPUT 50Ω Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 Pad Configuration: 12.80 0.50 SIPAT LBN11547 XXYYZZ Input Output 1 5 Ground All Others 4.70 0.50 4.50 0.50 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN11547: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.20 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.20 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBN11547 2009-08-14 2.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 24MHz Bandwidth Part Number: LBN11547 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -21.195 -31.195 -41.195 -30.695 -29.695 Passband Response Type Performance -30.195 -51.195 Magnitude(dB) A m plitude ripple(dB ) -61.195 -71.195 -81.195 -91.195 -31.195 -31.695 -32.195 -32.695 -101.195 -111.195 -121.195 -33.195 -33.695 70 80 90 100 110 120 130 Frequency(MHz) 140 150 160 90 100 110 Frequency(MHz) 120 130 140 Horizontal: 10MHz/Div Vertical: 10dB/Div Horizontal: 10MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±12MHz) Type Performance 3900 60 Phase Linearity(f0±12MHz) Type Performance 3800 40 3700 20 3600 X: 103 Y: 3.395 X: 115 Y: -0.59 X: 127 Y: 7.718 G roup Delay T im e(ns ) X: 115 Y: 3501 3400 D egree(deg) -20 -40 -60 130 -80 100 3500 X: 103 Y: 3487 X: 127 Y: 3448 0 3300 3200 3100 3000 100 105 110 115 Frequency(MHz) 120 125 105 110 115 Frequency(MHz) 120 125 130 Horizontal: 5MHz/Div Vertical: 100ns/Div Horizontal: 5MHz/Div Vertical: 20deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN11547 2009-08-14 2.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com