LBN11564

China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 25MHz Bandwidth Part Number: LBN11564 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 3 dB Bandwidth 25 dB Bandwidth 40 dB Bandwidth 50 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature DC Voltage Input Power ESD Class Package Size Notes: 1. 2. 3. 4. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz MHz dB usec dB KHz/°C °C V dBm - Minimum 114.85 25.4 50 Typical 115 31.6 25.43 25.57 26.12 26.28 26.46 0.9 3.8 55 -10.8 YZ LN 25 0 Maximum 115.15 33 26.2 27 1.3 - - 1A 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN11564 2010-10-15 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 25MHz Bandwidth Part Number: LBN11564 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration Source/Load Impedance=50 ohm INPUT 50Ω OUTPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 Pad Configuration: 12.80 0.50 SIPAT LBN11564 XXYYZZ Input Output 1 5 Ground All Others 4.70 0.50 4.50 0.50 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN11564: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.50 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.50 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBN11564 2010-10-15 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 25MHz Bandwidth Part Number: LBN11564 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -21.6058 -31.6058 -41.6058 -31.1058 -30.1058 Passband Response Type Performance -30.6058 -51.6058 Magnitude(dB) A m plitude ripple(dB ) -61.6058 -71.6058 -81.6058 -91.6058 -31.6058 -32.1058 -32.6058 -33.1058 -101.6058 -111.6058 -121.6058 70 80 90 100 110 120 130 Frequency(MHz) 140 150 160 -33.6058 90 100 110 Frequency(MHz) 120 130 140 Horizontal: 10MHz/Div Vertical: 10dB/Div Horizontal: 10MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±12.5MHz) Type Performance 3900 25 Phase Linearity(f0±12.5MHz) Type Performance 20 3850 15 10 3800 X: 115 Y: 3778 X: 102.5 Y: 3765 X: 127.5 Y: 3780 5 X: 102.5 Y: 2.328 X: 115 Y: -0.3324 X: 127.5 Y: 4.508 G roup Delay T im e(ns ) 3750 Degree(deg) 100 105 110 115 Frequency(MHz) 120 125 130 135 0 -5 -10 3700 -15 3650 -20 -25 3600 95 -30 95 100 105 110 115 Frequency(MHz) 120 125 130 135 Horizontal: 5MHz/Div Vertical: 50ns/Div Horizontal: 5MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 0.0 5.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN11564 2010-10-15 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com