LBN11565

China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 9MHz Bandwidth Part Number: LBN11565 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter Single-ended operation Ceramic Surface Mount Package Small size No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.2 dB Bandwidth 3 dB Bandwidth 40 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection(f0±10MHz) Material Temperature coefficient Substrate Material Ambient Temperature DC Voltage Input Power ESD Class Package Size Notes: 1. 2. 3. 4. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz dB usec dB KHz/°C °C V dBm - Minimum 114.9 9.4 50 Typical 115 19.2 9.27 9.55 10.77 0.9 2.38 58 -9.43 128LN 25 0 Maximum 115.1 25 10.85 1.2 - SMD24.64x8.99 1A 10 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN11565 2010-12-29 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 9MHz Bandwidth Part Number: LBN11565 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration Source/Load Impedance=50 ohm INPUT 50Ω OUTPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 24.64±0.20 Pad Configuration: 10 9 8 7 6 8.99±0.15 Input: 10 SIPAT LBN11565 XXYYZZ 1 2 3 4 5 Output: 5 Ground: All Others Marking Configuration: 2.14±0.25 1.02 1) •: Pad Number 1 Index 2) SIPAT: Manufacturer Name 3) LBN11565: Part Number 4) XXYY: Date(Year/month) 5) ZZ: Identified Code 1 2 3 4 5 1.02 Package: SMD24.64x8.99 Unit: mm 2.31±0.15 10 1.905 9 8 7 6 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN11565 2010-12-29 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 9MHz Bandwidth Part Number: LBN11565 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -9.205 -19.205 -29.205 -18.705 -17.705 Passband Response Type Performance -18.205 -39.205 Magnitude(dB) A m plitude ripple(dB ) -49.205 -59.205 -69.205 -79.205 -19.205 -19.705 -20.205 -20.705 -89.205 -99.205 -109.205 90 95 100 105 110 115 120 Frequency(MHz) 125 130 135 140 -21.205 -21.705 105 110 115 Frequency(MHz) 120 125 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±4.5MHz) Type Performance 3000 40 Phase Linearity(f0±4.5MHz) Type Performance 30 2800 20 2600 10 X: 110.5 Y: 0.08653 X: 115 Y: -0.2741 X: 119.5 Y: 4.777 G roup Delay T im e(ns ) 2400 X: 110.5 Y: 2346 X: 119.5 Y: 2371 X: 115 Y: 2326 Degree(deg) 125 0 -10 2200 -20 2000 -30 -40 1800 105 110 115 Frequency(MHz) 120 -50 105 110 115 Frequency(MHz) 120 125 Horizontal: 5MHz/Div Vertical: 200ns/Div Horizontal: 5MHz/Div Vertical: 10deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 0.0 5.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN11565 2010-12-29 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com