LBN11566

China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 9MHz Bandwidth Part Number: LBN11566 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth 50 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature DC Voltage Input Power ESD Class Package Size Notes: 1. 2. 3. 4. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz dB usec dB KHz/°C °C V dBm - Minimum 114.9 9.4 50 Typical 115 21.8 9.21 9.46 10.37 10.42 0.9 2.64 57 -10.8 YZ LN 25 0 Maximum 115.1 26 10.4 1 - - 1A 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN11566 2011-01-12 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 9MHz Bandwidth Part Number: LBN11566 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration Source/Load Impedance=50 ohm INPUT 50Ω OUTPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 Pad Configuration: SIPAT LBN11566 XXYYZZ Input Output 1 5 12.80 0.50 4.70 0.50 4.50 0.50 Ground All Others Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN11566: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.50 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.50 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBN11566 2011-01-12 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 9MHz Bandwidth Part Number: LBN11566 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -11.8112 -21.8112 -31.8112 -21.3112 -20.3112 Passband Response Type Performance -20.8112 -41.8112 Magnitude(dB) A m plitude ripple(dB ) -51.8112 -61.8112 -71.8112 -81.8112 -21.8112 -22.3112 -22.8112 -23.3112 -91.8112 -101.8112 -111.8112 90 95 100 105 110 115 120 Frequency(MHz) 125 130 135 140 -23.8112 -24.3112 105 110 115 Frequency(MHz) 120 125 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±4.5MHz) Type Performance 3100 30 Phase Linearity(f0±4.5MHz) Type Performance 3000 20 2900 2800 10 X: 119.5 Y: 6.256 G roup Delay T im e(ns ) 2700 0 X: 115 Y: 2633 2600 Degree(deg) X: 110.5 Y: -3.875 X: 115 Y: -3.827 X: 110.5 Y: 2616 X: 119.5 Y: 2611 -10 2500 2400 -20 2300 -30 2200 2100 108 110 112 114 Frequency(MHz) 116 118 120 122 -40 108 110 112 114 Frequency(MHz) 116 118 120 122 Horizontal: 2MHz/Div Vertical: 100ns/Div Horizontal: 2MHz/Div Vertical: 10deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 0.0 5.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN11566 2011-01-12 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com