LBN11569

China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 10MHz Bandwidth Part Number: LBN11569 SIPAT Co., Ltd. www.sipatsaw.com Features For IF SAW filter Single-ended operation Ceramic Surface Mount Package Small size RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 3 dB Bandwidth 40 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz dB usec dB KHz/°C °C V dBm - Minimum 114.5 10 32 Typical 115 12.8 10.2 10.7 14.6 0.3 1 35 -10.8 YZ LN 25 0 Maximum 115.5 15 15 1.5 - - 1A 10 SMD24.6*9.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN11569 2011-05-30 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 10MHz Bandwidth Part Number: LBN11569 SIPAT Co., Ltd. www.sipatsaw.com Matching Configuration INPUT 50 C1 L1 10 5 L2 OUTPUT 50 C2 L1=L2=27nH C1=39pF C2=56pF Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 24.64±0.20 Pad Configuration: 10 9 8 7 6 8.99±0.15 Input: 10 SIPAT LBN11569 XXYYZZ 1 2 3 4 5 Output: 5 Ground: 1,2,3,4,6,7,8,9 Marking Configuration: 1) •: Pad Number 1 Index 2.14±0.25 1.02 2) SIPAT: Manufacturer Name 3) LBN11569: Part Number 4) XXYY: Date(Year/month) 5) ZZ: Identified Code 1 2 3 4 5 1.02 Package: SMD24.6*9.0 Unit: mm 2.31±0.15 10 1.905 9 8 7 6 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN11569 2011-05-30 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 10MHz Bandwidth Part Number: LBN11569 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -2.816 -12.816 -22.816 -12.316 -11.316 Passband Response Type Performance -11.816 -32.816 Magnitude(dB) Amplitude ripple(dB) -42.816 -52.816 -62.816 -72.816 -12.816 -13.316 -13.816 -14.316 -82.816 -92.816 -102.816 90 -14.816 95 100 105 110 115 120 Frequency(MHz) 125 130 135 140 -15.316 105 110 115 Frequency(MHz) 120 125 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±5MHz) Type Performance 1200 20 Phase Linearity(f0±5MHz) Type Performance 1150 15 1100 10 1050 X: 110 Y: 1009 5 X: 110 Y: 0.09976 X: 115 Y: 0.1527 X: 120 Y: 2.421 Group Delay Time(ns) 1000 Degree(deg) 125 X: 115 Y: 996.2 X: 120 Y: 955.7 0 950 -5 900 -10 850 -15 800 750 -20 700 105 110 115 Frequency(MHz) 120 -25 105 110 115 Frequency(MHz) 120 125 Horizontal: 5MHz/Div Vertical: 50ns/Div Horizontal: 5MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.2 0.5 1.0 2.0 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN11569 2011-05-30 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com