LBN11802

China Electronics Technology Group Corporation No.26 Research Institute 117.6MHz SAW Filter 11MHz Bandwidth Part Number: LBN11802 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 3 dB Bandwidth 40 dB Bandwidth Passband Variation Absolute Delay f0±5.85MHz f0±6.05MHz Ultimate Rejection f0±6.45MHz f0±10.45MHz Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. 3. 4. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz dB usec dB dB dB dB KHz/°C °C °C °C V dBm - Minimum 117.45 10.9 35 45 50 55 Typical 117.6 23.7 10.92 11.67 1.1 3.58 36 57 58 62 -11.05 YZ LN 25 Maximum 117.75 27 1.5 4 - -40 -45 - 0 1A +85 +105 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN11802 2008-07-31 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 117.6MHz SAW Filter 11MHz Bandwidth Part Number: LBN11802 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration Source/Load Impedance=50 ohm INPUT 50Ω OUTPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 35.00 0.5 12.80 0.5 SIPAT LBN11802 XXYYZZ Pad Configuration: Input Output 1 5 Ground All Others 4.7 4.5 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN11802: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.2 7.62 0.2 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.2 2.54 0.2 Unit: mm Part Number Rev. Date Ver. LBN11802 2008-07-31 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 117.6MHz SAW Filter 11MHz Bandwidth Part Number: LBN11802 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -13.7424 -23.7424 -33.7424 -23.2424 -22.2424 Passband Respond Type Performance -22.7424 -43.7424 Magnitude(dB) Amplitude ripple(dB) -53.7424 -63.7424 -73.7424 -83.7424 -23.7424 -24.2424 -24.7424 -25.2424 -93.7424 -103.7424 -113.7424 95 100 105 110 115 120 125 Frequency(MHz) 130 135 140 -25.7424 -26.2424 110 115 Frequency(MHz) 120 125 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±5MHz) Type Performance 3900 80 Phase Linearity(f0±5MHz) Type Performance 3800 60 3700 40 3600 X: 112.6 Y: 3562 X: 117.6 Y: 3580 X: 122.6 Y: 3578 20 X: 112.6 Y: 4.236 X: 122.6 Y: 7.971 X: 117.6 Y: -2.471 Group Delay Time(ns) 3400 Degree(deg) 115 Frequency(MHz) 120 125 3500 0 -20 3300 -40 3200 -60 3100 -80 3000 110 -100 110 115 Frequency(MHz) 120 125 Horizontal: 5MHz/Div Vertical: 100ns/Div Horizontal: 5MHz/Div Vertical: 20deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 0.0 5.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN11802 2008-07-31 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com